Fathers name not appearing in HR standard Reports

Dear All,
Currently we are in process of using the standard pension reports like  Form4 P.S, Form5 P.S etc(Tcode : PC00_M40_EPN).
In the report output , we observe that the Father's name field is not getting populated.
On Analysing further, we understood that.
1.In the implementation stage, we had mapped the father subtype to '3' instead of the default  '11'.
(Personal Management>Personal Administration>Personal data -->  Family-> Define possible family members).
2.In all the standard pension reports ( tcode : PC00_M40_EPN , PC00_M40_PNY etc ),the select query in the ABAP programs hardcodes subtype '11' to fetch for father detail from infotype table PA0021(Family Member/Dependents).
3.We have a lot of data mainatined in the current production system with sybtype '3' mapped to father.Hence cannot change it at present.
Is there any way out to display the fathers name in the standard HR reports ?Possible alternatives..?
Thanks,
Rijuraj

Dear John,
After considerable thought we decided not to change the config.We also have some custom developments which uses the father subtype.All these data would need to be deleted and corrected.
Hence we directly modified the relevant subroutine in the standard reports and changed the value from '11' to '3'.
The reports now work fine.
Thanks.
Regards,
rijuraj
Edited by: Rijuraj Raju on Sep 21, 2011 1:10 PM

Similar Messages

  • Quantity is not appearing on Cost Center report S_ALR_87013611

    Hi Fellows,
    Quantity is not appearing on cost center report S_ALR_87013611. When we go to the line items it is appearing. Could you please help me in this regard.

    Hi,
       Please refer note 64120
    regards
    Waman

  • Full qualified host name not appearing in url within WSDL generated from PI

    Hi
       We are on PI711  ( AIX OS ) and are stuck with an issue of the fully qualifed hostname not appearing within WSDL file  generated in PI71 for a webservice it exposes using the Integration builder
    We changed the host name in exchange profile ( all locations ) from hostname to hostname.companyname.intra and also in the ABAP stack as recommended in all OSS notes.
    We use the Integration Directory --> Sender Agreement --> Display WSDL option to generate the WSDL.
    Its to be noted that all locations ( including url for WSDL ) have the fully qualified hostname except the url within the WSDL.
    Dioes anyone come across this issue/ know which parameters to be updated on the PI server to make the url within the WSDL for the PI webservice to have the fully qualified host name ?

    HI Karthik,
    As Mentioned by Baskar donu2019t use proposed URL .. while creating WSDL in Id.. but instead provide URL in following format and use it in that place and create WSDL.. details about URL format..
    the URL format is fix. and it is simple.
    http://host:HTTPPort/XISOAPAdapter/MessagingServlet?channel=party:sendersystem:CC_sender
    in above URL provide your sender service component name instead of sender system.
    and provide SOAP sender communication channel name in place of CC_sender
    provide your PI system host and http name in place of host and https and use this..
    for more details about URL..
    Propose URL when Configuring Sender SOAP Adpater
    soap url
    Thanks,
    Bhupesh

  • (Continuity) Caller Id name not appearing in mac

    Hi every body
    I face problem with some calls, the  Caller Id name sometimes not appearing in incoming call for mac (Continuity) only numbers.
    Please note that all the calls i get it has name in my contacts and it's already in iPhone and mac contacts app.
    Any ideas how to fix it.

    Thanks for all your reply,
    I found that we have Avaya Definity System with S8700 & found configuration documentation :
    http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/pbx/interop/notes/410364av.pdf
    What I found that Avaya side is configured for Qsig ; Basic Supplementary Services is not enabled (System Parameter & Customer options) .
    I also found this document ( http://www.svcc.cc.il.us/UserMenu/employees/telephone/images/buttons.pdf Page 362) about Supplementary Service protocol value which most likely change which Qsig Avaya side use.
    Once again thank you all , will let you know if things work .

  • Event name not appearing in calendar

    We currently have Novell Groupwise 8 as our email system and we are syncing with the iPad by using the Microsoft Exchange, when creating a new event, the event name does not appear on the calendar?? Event names for previously created events are showing but not a newly created event. On the calendar, the start time of the event shows but not the event name, it appears as a "New Event" not what has been listed in the subject line when the event is created.  It is not consistent and I can't figure out what is causing the problem...

    this is even weirder - when I backed out of the forum page and re-entered the discussion via the pulldown menu on the left hand side of the support homepage (iCal/then discussion forums link next to the iCal icon), the post message link appears. Coming into the discussions via the support link on the apple homepage, then discussions link under the Mac graphic, doesn't allow me to post....

  • Artist name not appearing in list

    I received a new Ipod Classic 160GB for Christmas. I have transferred some CD's to it and some of the names of the artists are not appearing in the list of names. The albums are there - is there any way to get these to display? Thanks!

    ... and as well as the helpful answers provided by planb77 and Jeff there is another little trick you could try.
    Remove the Compilations heading from the *Main Menu* of your iPod. This will then cause all the artists who only appear on compilation albums to appear on the iPod/music/Artists* list.
    To remove the Compilations heading, go to *Settings/Main Menu* and make sure Compilations does not have a tick next to it.
    Phil

  • Name not appearing in Dynamic Stamps

    Hi.
    When I insert a dynamic stamp, such as reviewed,approved etc, into a pdf my name does not appear as the reviewer/approver.
    I am using Adobe pro9 and Windows 7.
    Thanks.

    Is your copy of Acrobat up to date with version updates?
    The current version is 9.5.1.
    Have you turned off JavaScript in Acrobat?
    Did you create the dynamic stamp?
    Have you completed "Identity" category in Acrobat's Preferences?
    Do the Dynamic stamps supplied by Adobe work?
    What is the code you are using to insert your name?
    The code supplied by Adobe for their Dynamic stamps:
    event.value = (new Date()).toString();
    AFDate_FormatEx("h:MM tt, mmm dd, yyyy");
    event.value = "By " + ((!identity.name || identity.loginName != (event.source.source || this).Collab.user) ? (event.source.source || this).Collab.user : identity.name)
    + " at " + event.value;

  • Reciept element purchase requisition not appearing in  mrp order report

    Dear Gurus
    Receipt element purchase requisition is not appearing when I am trying to see the order report after running the mrp for the finished product .But the reciept element planned order is appearing for the semifinished products which are in the bom of the finished product.And if stock for raw materials are there then also it is showing the reciept element stock.Why is this happening ?
    Regards
    Sandip Sarkar

    Unable to interpret your query.
    Based on my guessing.... a PR is not visible for the Finished material as it must be a make material & if a planned order is showing up it means there is not enough stock to meet the demand. Now the dependent demand flows down from the finished to SFG & RM respectively & hence the supply proposal.
    The above is a straight forward planning cycle flow, so what the issue am not able to figure it out. Either you upload some screenshots & paste the link here or provide a detailed explanation to get a clear understanding.

  • Field name not known   in old existing report.

    We have a report that we have used for a long time and has always been fine.  Today when we open it  it says data will be lost because "Field name not known".   So you click ok and look at the report in design and the report is missing a bunch of fields.  You look at the Field Explorer and it only shows the first field in the table.  This report links 2 tables. The linking field is the first field in both tables.
    I try to re-map datasource and no luck.   I close Crystal, open Crystal and create a new report, look at the same tables and all of the fields are there. Create similar report looking at same datasource, same tables, some of the same fields, and it works fine.
    What is wrong with the original report and why won't it connect or show fields?

    It may be that the report file became corrupted. Do you have a back up of that report anywhere? If not you could create a new report using the same tables and links and then have both new and old reports open and copy objects from the old report to the new report. Save it and then verify it all works as it should and replace the old report with then new report. Copy the old report somewhere safe also.
    Thank you
    Don

  • Domain Names Not Appearing In Drop Down of Data Cleansing Task

    For some reason, in several of my DQS data cleansing tasks, the domain names of the knowledge base I choose are not appearing. This is turn leads to an error message stating that "No domain field has been mapped to the input column...".
    The task can see the DQS server and it can see the various knowledge bases on that server, but the domains are not appearing.
    Has anyone else run into this issue?
    Thanks!!
    A. M. Robinson

    I have just found the same issue.
    For me, I believe it is because the domains are only used in matching rules, which the SSIS task does not support. Therefore they are not in the drop down as the SSIS DQS task cannot use them. Only map domains for data correction and you should be ok.

  • Text Functions Not Appearing in PDF (Financial Reports)

    In the header of Financial Reports we are using common text functions to create the report titles with POVAlias and related functions. These headers correctly appear when printing or web viewing the reports. However, when viewing or printing to PDF - the header appears blank - the function results are not displayed.

    <p>Hi Brianeccher</p><p>We've the same problem. We use the financial reporting studio9.3.0.502. The background color from text boxes do not appear, whenprinting to pdf.</p><div dir="ltr" id="result_box">Did you find a solution?Thanks</div>

  • Contact names not appearing in texts or when calls recieved

    I got off a plane from the UK to the US (this was a return trip, i'm from the US on Verizon) and when I turned my iPhone 4S back on, all of the contact names (who are in my Contacts) disppeared from emails, texts and my phone log.  A friend told me to "Import SIM Contacts" but that didn't do anything.  I deleted all of my texts hoping that when I sent new texts and recieved calls names would appear, however they still are not.  Is there anything I can do other than take it to the Genius Bar?

    I didn't have the problem when returning from International, but I did have the problem right after my new Verizon iphone was set up last week. 
    After reading some of the posts in the support forum, I first edited my contacts to include the +1 in front of the phone numbers (this may have been an unnecessary step, and it certainly was an annoying one).
    Second, I used the *228 set up feature, closed the phone, contacts and text functions on the phone, then turned the phone off and back on, and it seemed to fix the problem for the most part.  I think if you search the forum for *228, you will find posts that have the full sequence of steps to follow.. 
    I have other issues with my phone, but at least this one seems cleared up for now.

  • Names not appearing

    when I receive calls on my Q10 the names do not appear even though they are in my contact list.  This happens with calls from within my country (Kenya).  I have saved my numbers with +254 being the country international dialling code.  Any suggestions? This was not an issue on my previous device BB Bold

    http://www.blackberry.com/btsc/KB33480
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Contact names not appearing in group text

    When sending a group text the contact names do not appear but the phone numbers do, is there a way to change this?  Phone is a Z30  STA100-5

    I didn't have the problem when returning from International, but I did have the problem right after my new Verizon iphone was set up last week. 
    After reading some of the posts in the support forum, I first edited my contacts to include the +1 in front of the phone numbers (this may have been an unnecessary step, and it certainly was an annoying one).
    Second, I used the *228 set up feature, closed the phone, contacts and text functions on the phone, then turned the phone off and back on, and it seemed to fix the problem for the most part.  I think if you search the forum for *228, you will find posts that have the full sequence of steps to follow.. 
    I have other issues with my phone, but at least this one seems cleared up for now.

  • Please help! Artist names not appearing in ipod after syncing!

    Hey there everyone, I really really need some help with this problem that I have now had for 2 months. I have this problem on 3 different ipods so I know it is not a problem with the ipod, it is with itunes.
    My itunes library is in perfect order and set up how I want it to be when in my ipod, e.g, every song has the artist, album and song name in the correct places in the 'get info' tab, and appears in the correct places in the itunes library.
    However, when I synchronise my ipod with itunes, the artist tab in the ipod consistently says 'no artists'. However, the songs are in the songs tab and albums in the albums tab, but it doesn't register the artists. Because of this I can't search for the artists I want.
    I have spoken to apple numerous times and they haven't been able to tell me what is wrong with it. I'm at my wits end with this and so greatly appreciate any help or advice anyone can give.
    Things I have tried so far include, changing ipods, selecting all as part of a compilation, deleting the music from itunes and then putting back into itunes. None of this has worked.
    Please help
    Thanks

    *When I rip CD's onto iTunes and then upload them onto my iPod some of them DON'T APPEAR ON THE 'ARTIST' section of my iPod Nano.*
    There are usually two things that contribute to songs not appearing under Artist on the iPod, both due to information either in or missing from the Get Info>Info tab against the song in iTunes. 1) the song has no album name associated with it or 2) the song is marked as part of a compilation.
    If tracks are missing an Album name in the Info tab, this information needs to be filled in. The no album one is a bit quirky as the songs will appear under certain circumstances (for instance I read somewhere that if you have at least two tracks with different album names the rest will appear), however the simplest remedy is just add None or Miscellaneous to all the blanks in place of a title. See this link for more detail: I don't see some of my songs when browsing by artist on my iPod
    Also if the tracks are ticked in the Get Info>Info tab as part of a compilation, they will not appear under Artist on the iPod. Highlight a song in iTunes that you know is not appearing correctly on your iPod. Right click on it and choose Get Info and click the Info tab (alternatively choose Get Info from the File menu), if "Part of a Compilation" is marked untick it and afterwards update your iPod, you should find it now appears as normal. Setting "Compilations" on your iPod main menu prevents you getting lots of single artist entries when you load an album by various artists.

Maybe you are looking for