Fault code -42110

What is fault code -42110?

Read here:
http://support.apple.com/kb/TS3297
Especially specific conditions & removing the SC folder.

Similar Messages

  • Windows error code -42110

    I just upgraded iTunes software.
    When launching the iTunes version 11.0.2.26 I get a Windows unkown error code :  -42110.
    Anyone who knows about this? Impact and solution? Thanks

    Hello Guys, this upgrade seemngly also killed my iPod Classic 160GB... Both my iPad and iPod were connected to my Windows 7 Home PC. After the iTunes upgrade the same unknown error popped up, immediatel after came something like a "corrupted device". My iPod tried to restart, and seems to be in an infinite restarting loop...the apple logo is on for minutes, then a loud "click" from the HD and it starts again. Nothing helps (middle button+menu reset). Do you have any ideas? Thanks

  • Error code -42110 after installing intunes 64

    Hi,
    after installing iTunes 64 (Windows) on my new Netbook I get an error code (-42110). Also it is not possible to synchronize my iPod. I can press the button "synchronize" but nothing happend. So my music can not be "downloaded" from iPod into new Mediathek.
    Any idea what to do to fix it?
    Thnaks for support

    For the 42110 error try this user tip:
    https://discussions.apple.com/docs/DOC-4831
    Hope that helps.
    Regards.

  • Latest IOS displays fault code 1671, what does this mean?

    latest IOS displays fault code 1671, what does this mean?

    If it has NEVER been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • Why am i getting error code (-42110)

    I cant download a movie without getting an error code (-42110) The error code appears at the time when it usally gives the option to play or watch the movie later.

    Hello robert,
    According tot the article below, that error is related to authorization issues. Take a look a the section below for the steps on how to resolve it. You will want to make sure that you are up to date with iTunes and may need to remove the SC Info folder to get it sorted out. 
    iTunes: Advanced iTunes Store troubleshooting
    http://support.apple.com/en-us/ts3297
    "Error 3001,"  "-42110," or "5103"
    This alert is related to iTunes Store movie rentals and authorization issues.
    Make sure you are using the most recent version of iTunes and QuickTime. They both can be downloaded free of charge.
    If your iTunes is up to date, remove the SC Info folder.
    Regards,
    -Norm G. 

  • I tried renting a movie, but every time I try to play it, it gives me an iTunes error code -42110.  What is the deal?

    I tried renting a movie, but every time I try to play it, it gives me an iTunes error code -42110.  What is the deal?
    - Cratin

    Something like this happened to me, where something went wrong on Apple's end and a movie I rented wouldn't play. I contacted Apple over the phone and they gave me back my money and fixed the problem for future use.

  • What does it mean error code -42110?

    what does it mean error code -42110?

    Try this user tip:
    https://discussions.apple.com/docs/DOC-4831
    Hope that helps.
    Regards.
    Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Communities page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums and in the Apple Knowledge Base, before you post a question.

  • TS1717 error code 42110. What does that mean?

    I keep receiving an error code #42110 when I try to play my movie.  Any help?

    Perhaps try the "Error 3001," "-42110," or "5103" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • What it is mean? Everytime i start up itunes i get the error code -42110

    Everytime i start up itunes i get the error code -42110. What it is mean?
    Someone help me please!

    https://discussions.apple.com/docs/DOC-4831

  • HT201320 when I check and update,  My iphone 4 appears 3194 fault code ,it can't use now .can you help me ?

    fault code 3194,when I update from 6.1.4 to 7.0.2.
    <Email Edited By Host>

    Hi xsliu2013,
    Thanks for visiting Apple Support Communities.
    You may find the information in this article helpful:
    iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
    http://support.apple.com/kb/ts4451
    Best,
    Jeremy

  • TS3694 I tried updating my iPhone with the latest update.  It downloads the update to my computer fine, but when it tries to update the phone, I keep getting a fault code of 3014.  I've tried it four times.

    I tried updating my iPhone with the latest update.  It downloads the update to my computer fine, but when it tries to update the phone, I keep getting a fault code of 3014.  I've tried it four times.

    Try taking it to the nearest Apple Store. They should have computers there that they can use to get your iPhone out of recovery mode. Make an appointment first.

  • Error code (-42110)

    Every time I open iTunes, I get the error code -42110, but it seems iTunes is working normally, at least I don't see any critical errors. Whats does that mean and how do I fix it?

    Try the following user tip:
    iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes

  • HT5085 I get fault code 4002

    trying to get Itunes match, after payment I start and get fault code 4002, what now?

    The 11222s can sometimes be associated with LSP issues.
    I'd try the following document:
    Apple software on Windows: May see performance issues and blank iTunes Store
    (If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

  • Power on password fault code 97025088

    Need your help guys. Have this fault code and can't log in. Kids put a dang password on it.
    This question was solved.
    View Solution.

    Try >> 28983008
    Enter BIOS and disable password. Use the code as old password leave new blank. Save & Exit.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • Access to fault code history from CWIS

    It would be nice to have the ability to pull fault history from CWIS while logged in as admin, rather than having to get in front of the user interface. We have 43 Xerox machines company wide spread across 6 buildings, and up to 10-15 miles apart. While 50% of our machines have Remote User Interface, other machines have no received upgrade or unable to support the feature. Thank you.

    The machines we use are primarily the colorqube 9300 series. We also have a few 8700's and 8900's and a lone 7835. Even with the most recent software updates you cannot pull fault code history from CWIS. I appreciate your response. Thank you,

Maybe you are looking for