Fault Code

Hi ,
Flex doesnt identify fault code received through web services as the responce code is greater than 200.
Is there any way to receive this fault code.
Cheers!:)

Hey @richmcconn2014 ,
Welcome to the HP Forums!
I understand you're getting errors on your Omni 10 tablet regarding the wireless adapter.
I'm unable to find any information on a hardware error "fault code 103."
Can you please elaborate on these errors?
Where do you see the error? (Device Manager, bottom right corner by the wireless icon, when trying to browse, on startup?)
Have you made any recent changes to the tablet? (Windows updates, driver updates, software installations, or security software updates/installations?)
Do you have the same issue on a different wireless network?
What have you attempted to resolve the issue so far?
Thanks! I look forward to hearing back from you.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

Similar Messages

Latest IOS displays fault code 1671, what does this mean?

latest IOS displays fault code 1671, what does this mean?

If it has NEVER been jailbroke, here are some standard repair procedures:
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. It could take well over an hour! Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow the on-screen directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here. You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again. Also, read this.

HT201320 when I check and update, My iphone 4 appears 3194 fault code ,it can't use now .can you help me ?

fault code 3194,when I update from 6.1.4 to 7.0.2.
<Email Edited By Host>

Hi xsliu2013,
Thanks for visiting Apple Support Communities.
You may find the information in this article helpful:
iOS: Restore error 3194 or 'This device isn't eligible for the requested build'
http://support.apple.com/kb/ts4451
Best,
Jeremy

TS3694 I tried updating my iPhone with the latest update. It downloads the update to my computer fine, but when it tries to update the phone, I keep getting a fault code of 3014. I've tried it four times.

I tried updating my iPhone with the latest update. It downloads the update to my computer fine, but when it tries to update the phone, I keep getting a fault code of 3014. I've tried it four times.

Try taking it to the nearest Apple Store. They should have computers there that they can use to get your iPhone out of recovery mode. Make an appointment first.

HT5085 I get fault code 4002

trying to get Itunes match, after payment I start and get fault code 4002, what now?

The 11222s can sometimes be associated with LSP issues.
I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Power on password fault code 97025088

Need your help guys. Have this fault code and can't log in. Kids put a dang password on it.
This question was solved.
View Solution.

Try >> 28983008
Enter BIOS and disable password. Use the code as old password leave new blank. Save & Exit.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Access to fault code history from CWIS

It would be nice to have the ability to pull fault history from CWIS while logged in as admin, rather than having to get in front of the user interface. We have 43 Xerox machines company wide spread across 6 buildings, and up to 10-15 miles apart. While 50% of our machines have Remote User Interface, other machines have no received upgrade or unable to support the feature. Thank you.

The machines we use are primarily the colorqube 9300 series. We also have a few 8700's and 8900's and a lone 7835. Even with the most recent software updates you cannot pull fault code history from CWIS. I appreciate your response. Thank you,

Fault code 4014

i put my iphone to recover and after a while din just nothing. i tried again and it gives fault code 4014. i used several times de recovery without any results. phone is just dead. i can not start it. lights off. i can not acces it.

iOS: Restore errors 4005, 4013, and 4014

When trying to upgrade to the 5.0 software, I get a fault code, 14. My phone will not work. What do I do?

When I try to install the new 5.0 software, I get fault code 14.....then my phone no longer works. What do I do????

Covered here:
http://support.apple.com/kb/TS3694

Fault code -3212

what is this fault code and how can i fix it ?

Read here:
http://support.apple.com/kb/TS3297
Especially specific conditions & removing the SC folder.

Fault code -42110

What is fault code -42110?

Read here:
http://support.apple.com/kb/TS3297
Especially specific conditions & removing the SC folder.

Setting SOAPFaultExcepion fault codes and fault detail

I'm using WLS 7 SP1.
I'm having a couple of problems with SOAPFaultExceptions in WLS 7 SP1.
i) The generated web service front end happily wraps SOAP Fault fault string with
"EJB exception..." and always reports the fault code as "Server"; I believe the
latter problem is is a known issue.
ii) In an effort to get around the above problems, I thought I would simply add
detail entries but to be honest I can't quite figure out how to do it. I thought
I would create a Detail container via a SOAPFactory and add a detail entry via
Detail addEntry().
Am I able to do this with WLS 7 SP1 as is or do I need to use additional SOAP
libraries (pointers would be appreciated)?
Thanks.

In your orchestration, capture the SOAPFault (hope you're already doing this), then in the captured message if you use the XPATH as below, it will capture the ErrorCode and ErrorText from the above shown fault structure.
sErrorCode = xpath(msgYourSOAFFault,"string(/*[local-name()='Envelope' and namespace-uri()='http://schemas.xmlsoap.org/soap/envelope/']/*[local-name()='Body' and namespace-uri()='http://schemas.xmlsoap.org/soap/envelope/']/*[local-name()='Fault' and namespace-uri()='http://schemas.xmlsoap.org/soap/envelope/']/*[local-name()='detail' and namespace-uri()='']/*[local-name()='errorDetail' and namespace-uri()='http://integration.com/ErrorDetails.xsd']/*[local-name()='Error' and namespace-uri()='http://integration.com/ErrorDetails.xsd']/*[local-name()='ErrorCode' and namespace-uri()='http://integration.com/ErrorDetails.xsd'])");
//ErrorText
sErrorText = xpath(msgYourSOAFFault,"string(/*[local-name()='Envelope' and namespace-uri()='http://schemas.xmlsoap.org/soap/envelope/']/*[local-name()='Body' and namespace-uri()='http://schemas.xmlsoap.org/soap/envelope/']/*[local-name()='Fault' and namespace-uri()='http://schemas.xmlsoap.org/soap/envelope/']/*[local-name()='detail' and namespace-uri()='']/*[local-name()='errorDetail' and namespace-uri()='http://integration.com/ErrorDetails.xsd']/*[local-name()='Error' and namespace-uri()='http://integration.com/ErrorDetails.xsd']/*[local-name()='ErrorCode' and namespace-uri()='http://integration.com/ErrorDetails.xsd'])");
For adding the exception handler for SOAP-Fault, you can either refer the sample in SDK or
reference this article. And in the exception handler, use the above XPath to capture the ErrorCode and ErrorText.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

LPP 556 Fault code

Hello, I have a problem using Labview 6.1. When attempting to run the software I am encountering a fault with code LPP 556. Any ideas or suggestions would be extremely welcome, Pete

Can you give us more information. Screen captures, saved in a format other than ".bmp", such as .jpg would be helpful. I don't recognize the error, but then it has been a while since I did anything in 6.x Are you trying to run any other code with it, like special hardware drivers, .dll's, etc.?
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Fault Code F1237

Hi,
After upgrading my UCS to version 2.1(3a), a fault appeared on one of the blade servers with a code of F1237
the full message is:
Health LED of server 1/2 shows error. Reason: P3V_BAT_SCALED:Voltage Threshold Crossed;
Type: equipment
Cause: health-led-amber
Code: F1237
any suggestion to resolve this fault as I tried to search for a solution with no success.
-Abdullah

Abdullah,
Welcome to the community!
That sensor makes reference to the CMOS battery on the server. Could you please open an SSH session to the UCSM virtual IP address and run the following commands in bold?
B# connect cimc X/Y    X=Chassis Y=Blade
[ help ]# sensors
The output will look something like:
CIMC Debug Firmware Utility Shell [ support ]
[ help ]# sensors
Sensor Name                | Reading | Unit          | Status     | LNR     | LC
=================|===============|============= |=====|
P3V_BAT_SCALED     | 3.102     | Volts       | OK      | 1.993   | 2.416   <<<<<<<<<
P1V5_DDR3_P1           | 1.329      | Volts        | OK     | 1.212   | 1.280
At the bottom you can see what column means:
LEGEND:
LNR: Lower Non Recoverable Threshold
LC : Lower Critical Threshold
LNC: Lower Non Critical Threshold
UNC: Upper Non Critical Threshold
UC : Upper Critical Threshold
UNR: Upper Non Recoverable Threshold
na : Not available at this time or not applicable
If you see your battery is not within the acceptable ranges, then open a TAC case to have the battery replaced cause that is the only way to solve that low voltage issue.
Rate ALL helpful answers.
-Kenny

Z77 MPOWER stuck at A2 fault code

Hello!
Ive been working on this issue since yesterday morning and thought I would post here to see if the is a simple solution I am missing.
Completed the build about 4 months ago. Have had no problems. Computer was running fine, then it was left over night and it restarted and froze seconds into the boot showing A2 in the lower right hand corner of the screen. (it also reads on the motherboard LED panel) It is not finishing Post, entering BIOS or OS
What I've tried so far:
1 Cleared CMOS via button on back. got to a screen that said everything had been reset to default values and to press f1 to set up or f2 to continue. When I press F1 it says "entering Setup..." on the bottom of the screen but goes no further. Sometimes the computer shuts off then comes back on, once back on it stops at displaying A2 on the screen. When I press f2 nothing happens.
2 Tried switching to other BIOS with MULTI-BIOS switch, Same issue.
3 I got a wired keyboard to make sure it was getting a signal. Issue remains.
4 I unplugged everything except Ram, PSU, GPU, CPU. Issue remains
5 got a PSU tester, tested the PSU-was bad- so I replaced it. Issue remains.
6 Read that A2 was a VGA fault-Tried with onboard video. Bought a cheap Video card to see if that would work, Issue remains.
7 created bootable Bios memory card using tool from this forum and could not get it to boot from The thumb drive.
Any ideas?
System
Z77 MPOWER motherboard
Intel 3770K i7 processor stock cooler
Evga Geforce GTX 660 ti
Corsair 16 GB DDR3 1600
Antec HCG-750 psu (replaced the Cougar CMX 1000w)
1 & 2 TB HHD for data and media
228gb SSD for boot and data
PCI-e USB 3.0
Any suggestions would be super.
Tim

Here is the list of codes;
http://www.ami.com/support/doc/AMI_Aptio_4.x_Status_Codes_PUB.pdf
0xA2 IDE Detect It's got nothing to do with VGA.
Use just one of the RAM sticks in the primary DIMM slot for testing (DIMM2). Clear CMOS again, PSU power cord removed, battery removed. Was this a migrated OS or fresh install? Z77 defaults to AHCI Mode, if the OS was originally installed under IDE, it will not boot.
A2 may be a failed HDD/SSD.
Added: We have seen it many times that a PSU may even pass a test but still be faulty. Just saw it here at the forum yesterday. Exactly what did you replace the failed PSU with? Brand and specifications please. Cougar 1000 in your sig? I will look up specs for it.
2nd add: Not too impressed with that multi +12v rail design. +12V1@24A, +12V2@24A, +12V3@24A, +12V4@24A, +12V5@28A, +12V6@28A
This suggestion would be plenty of power for your system configuration and much better being a +12v single rail model;
>> TX750 V2 <<
Best troubleshooting thought I have is it is a failed SSD that has the OS on it.

Fault Code

Similar Messages

Maybe you are looking for