Fault Device Manager 4.1.0 and C4503E devices

Dears,
I am working with LMS 4.1 and FDM 4.1.0.
If I ask to the Supported Device Finder Portlet about C4503-E (SysObjectId: 1.3.6.1.4.1.9.1.874), it tells that this device is supported by DFM 4.1.0. Nevertheless, in DFM module each one devices appear in the "All Unknown Devices" group, with Error Code: Unsupported.
CDP is enable in each one of these devices.
Any idea about what's the problem?
Thanks in advanced.

Have you installed the latest Fault Device Packages form CCO ?
DFM needs to have snmp read access to the devices to classify them. Check if you can reach the device with SNMP from the LMS server.

Similar Messages

LMS 3.2. Campus Manager (5.2.1) and some devices in "Not Managed" state

Hi:
I have enabled auto mode and manually included but when I run a data collection some devices don't take part in the process. When I click in show included devices I can see 13 devices in Not Managed state, include C2950G and C2960S . But 3 sets of C2950G can be managed . What is this? How can I fix it?
I attach ani.log file
Thanks

Try to remove the Auto-sync mode and try to add those 13 devices manually and run Data Collection and check if they get added.
-Thanks
Vinod

I bought apple iPad on this July , it's been only two months but now I'm getting a problem like no wifi it's greyed out sometimes and showing no wifi... Please help I'm frustrated on this , did they provided me a fault device ??

I bought apple iPad on this July , it's been only two months but now I'm getting a problem like no wifi it's greyed out sometimes and showing no wifi... Please help I'm frustrated on this , did they provided me a fault device ??

See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
It is frequently a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

Ciscoworks LMS 4.0 – Fault Device Details Issue

       We currently use Ciscoworks LMS 4.0 but when I go into, Monitor > Fault Settings > Setup > Fault Device Details
       I get the following message (see attached document with screenshot) and being a LMS newbie am unsure what to do? As have tried to search for this
       file but no luck.
       So thanks in advance for any advice.

Check if the fault management rediscovery page shows device as discovered and known or does it have any errors?
Are you able to generate any fault management reports and view other pages?
Just try to reboot the server/restart daemon to see if it is goes away.
Else it is mostly corrupt FM DB. Which would need to be re-initialized.
Fault Mgmt reinitialize is very simple task, which doesnt removes a lot of data, except past 31 days of FM history and custom notifications, if configured.
Thanks
Vinod
**Rating Encourages contributors, and its really free. **

BPEL - Fault Policy Management

Hi All
I trying to implement the fault policy management in oracle soa suite 10.1.3.5 and
I am facing a problem in it.
I have defined the process level policies in the fault-bindings.xml file as shown below and its not working.
<faultPolicyBindings>
<process faultPolicy="NICBPELFaultPolicy">
<name>mainCalcProcess2</name>
</process>
<process faultPolicy="RetryPolicy">
<name>addMainProcess</name>
</process>
</faultPolicyBindings>
is it a correct way of fault handling?
Regards
Senthil R

Sathish Venkatr... wrote:
Hi,
Could you provide me the details of testing this Fault policy.
You can handle the fault policy at process level and domain level, it looks like you are trying to have fault policy at <font face="tahoma,verdana,sans-serif" size="1" color="#000">Domain</font> level.
You have defined the Fauilt at domain level by defining in fault-bindings.xml file.
Have you restarted the server after defining this fault? If yes how are you testing this fault?
Thanks
SathishI got more deep understanding about this part, Thanks for your explanation! Nice writing.

Managing Windows Phone's and Symantec Code Signing certificate

Hi,
We need to renew the code signing certificate from Symantec. However, we only use it to manage the Windows Phone devices and don't publish apps. Do we still need to spend $300 on renewing this cert? Can't I manage them for free like our iOS and Android devices?

You REQUIRE the Symantec Code Signing Certificate to manage Windows Phones via Windows Intune. This is a requirement of the device rather than the management solution.
You CAN manage Windows Phones without this cert using only Exchange active sync management in Intune. However this management is very basic and has no advanced features (basically the features provided by Exchange rather than Intune).
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson

How to have one centeral management console for DB and Application server?

Hi
Thank you for reading my post
I read in several places that ORACLE provide facilitis that help developers to have one centeral console to manage Application server / Database and what ever oracle products.
I want to know that, when i have Oracle 10g r2 and Application server 10.1.3.1 installed, how i can use that centeral management console?
is it some other application that i should install ?
or it is just some more configuration?
thanks

What you are looking for is called Grid Control.
You will need the Grid Control Agent installed on each server that has products from Oracle's technology stack installed (database, web server, app server, etc). You will also need install the Grid Control software and repository.
You can download Grid Control from the following link:
http://www.oracle.com/technology/software/products/oem/index.html

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980's and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980’s and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my own folder and file naming conventions. I currently have over 23,000 images of which around 60% are scans going back 75 years. Since I keep a copy of the originals, the storage requirements for over 46,000 images is huge. 180GB plus.
I now have a Macbook Pro and will add an iMac when the new models arrive. For my photos, I want to stay with Photoshop which also gives me the Bridge. The only obvious reason to use iPhoto is to take advantage of Faces and the link to iMovie to make slideshows. What am I missing and is using iPhoto worth the effort?
If I choose to use iPhoto, I am not certain whether I need to load the originals and the edited versions. I suspect that just the latter is sufficient. If I set PhotoShop as my external editor, I presume that iPhoto will keep track of all changes moving forward. However, over 23,000 images in iPhoto makes me twitchy and they are appear hidden within iPhoto. In the past, I have experienced syncing problems with, and database errors in, large databases. If I break up the images into a number of projects, I loose the value of Faces reaching back over time.
Some guidance and insight would be appreciated. I have a number of Faces questions which I will save for later.

Bridge and Photoshop is a common file-based management system. (Not sure why you'd have used ACDSEE as well as Bridge.) In any event, it's on the way out. You won't be using it in 5 years time.
Up to this the lack of processing power on your computer left no choice but to organise this way. But file based organisation is as sensible as organising a Shoe Warehouse based on the colour of the boxes. It's also ultimately data-destructive.
Modern systems are Database driven. Files are managed, Images imported, virtual versions, lossless processing and unlimited editing are the way forward.
For a Photographer Photoshop is overkill. It's an enormously powerful app, a staple of the Graphic Designers' trade. A Photographer uses maybe 15% to 20% of its capability.
Apps like iPhoto, Lightroom, Aperture are the way forward - for photographers. There's the 20% of Photoshop that shooters actually use, coupled with management and lossless processing. Pop over to the Aperture or Lightroom forums (on the Adobe site) and one comment shows up over and over again... "Since I started using Aperture/ Lightroom I hardly ever use Photoshop any more..." and if there is a job that these apps can do, then the (much) cheaper Elements will do it.
The change is not easy though, especially if you have a long-standing and well thought out filing system of your own. The first thing I would strongly advise is that you experiment before making any decisions. So I would create a Library, import 300 or 400 shots and play. You might as well do this in iPhoto to begin with - though if you’re a serious hobbyist or a Pro then you'll find yourself looking further afield pretty soon. iPhoto is good for the family snapper, taking shots at birthdays and sharing them with friends and family.
Next: If you're going to successfully use these apps you need to make a leap: Your files are not your Photos.
The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
When you process an image in iPhoto the file is never touched, instead your decisions are recorded in the database. When you view the image then the Master is presented with these decisions applied to it. That's why it's lossless. You can also have multiple versions and waste no disk space because they are all just listings in the database.
These apps replace the Finder (File Browser) for managing your Photos. They become the Go-To app for anything to do with your photos. They replace Bridge too as they become a front-end for Photoshop.
So, want to use a photo for something - Export it. Choose the format, size and quality you want and there it is. If you're emailing, uploading to websites then these apps have a "good enough for most things" version called the Preview - this will be missing some metadata.
So it's a big change from a file-based to Photo-based management, from editing files to processing Photos and it's worth thinking it through before you decide.

I forgot the answers for the security questions and when I try to change them (My Apple ID - Manage your account - Password and Security) I'm asked to answer the exact questions I'm Trying to change because I don't remember the answers. How can I do it?

I forgot the answers for the security questions and when I try to change them (My Apple ID -> Manage your account -> Password and Security) I'm asked to answer the exact questions I'm trying to change because I don't remember the answers. How can I do it?

Can't you try the email option instead?

HT201210 I am unable to update my IPhone 4 to the IOS 6. I managed to back up and transfer and then when it asked to update I said yes and the sync process starte, left it overnight and it came up with an error if continue you will loose all your data.

I am unable to update my IPhone 4 to the IOS 6. I managed to back up and transfer and then when it asked to update I said yes and the sync process started, left it overnight and it came up with an error if continue you will loose all your data. So stopped! Help!

Are you currently on ios 4? If so that's where the backup comes in. You'll need to restore your backup once the software is updated.

Whenever you try to save a PDF file to a location other than the default location ('My Documents'), Firefox freezes & you have to go to the 'Task Manager' to exit Firefox and stop the error, so you can load Firefox again.

Whenever you try to save a PDF file to a location other than the default location ('My Documents'), Firefox freezes & you have to go to the 'Task Manager' to exit Firefox and stop the error. I have Windows XP (Media Center Edition) and all updates (Firefox, Adobe PDF, Microsoft, virus protection, etc) are installed. This has only been a problem since Firefox 4, and isn't a problem in Internet Explorer.

Hi David,
Thank you for your detailed question. It sounds like the real issue is pdf files. Are there any antivirus/firewalls that might be blocking this specific file type? or are there any preferences in your control panel that might be blocking this?
Do you have any stored preferences for PDF files in Firefox?
*[[Applications panel - Set how Firefox handles different types of files]]

Upload File to Content Management Server (Tcode OAC0) and Return a URL

Dear Experts,
We use webdynpro ABAP for UI and now we have a requirment: User want to upload a attachment to Content Management Server (Tcode OAC0) and get the URL like "http://svsrmd01.csvw.com:8000/sap/ebp/docserver/Daily.txt?attcget&ClId=4F45CC6E84F31335E10000000A7A05C5&sap-client=280". Is there any stand function to achieve it? Many thanks!

Hi,
This link will be helpful for u.[content ngmt|http://help.sap.com/saphelp_crm700_ehp01/helpdata/en/07/53291e70e346b1bf16977cc8dcabdd/frameset.htm]
regards,
Karthik.R

Hi there, I made the monthly payment for the Adobe apps, i managed to download Illustrator and Photoshop but can't seem to download Indesign. It says that "file seems to be corrupted... try later". How do I solve this problem?

Hi there, I made the monthly payment for the Adobe apps, i managed to download Illustrator and Photoshop but can't seem to download Indesign. It says that "file seems to be corrupted... try later". How do I solve this problem?

Hi shuster9,
It seems the downloaded setup for InDesign has got corrupt.
Could you please clear the TEMP from your computer and then retry.
Thanks,
Manish Sharma

Adobe Extension Manager loops with the following message: "The Extension Manager will now launch and

Hi, whenever I open Dreamweaver CS5 I get this message:
Adobe Extension Manager loops with the following message:
“The Extension Manager will now launch and finish updating Dreamweaver”.
Then the manager starts and I have to wait and click a few buttons until I can close it.
How can I stop the Extension Manager popping up?
Thanks for advice.

Seems to be a lot of this going on. Wondering if we're wasting our time with this??!!

Just completed a clean install of CS6 Photoshop on my Yosemite Mac Book Pro and the Adobe Application Manager does not work and cannot install a fresh copy from Adobe

Just re-installed a fresh copy of CS6 Photoshop on my Yosemite Mac Book Pro and somehow the Adobe Application Manager does not work and therefore cannot verify my copy. What should I do?
I get a message saying that Adobe Application Manager may be damaged and that I should install a new version of AAM. But after downloading a fresh copy of AAM and doing the install, the program (AAM) still will not install. It is like an infinite loop!
Please, someone help!
Thanks!

HI gener7!
I'm sorry but I am not on Creative Cloud. I'm still on CS6 and it was the Adobe Application Manager that wasn't working and I could not install the update to this application. My AAM version is: 8.0.0160
The link you provided was the update that I wanted to install but it does not work. A window shows up during that install that says:
We've encountered the following issues.
Installer failed to initialize. Please download Adobe Support Advisor to detect the problem.
and then the link to the Adobe Support Advisor which leads to a "Adobe Support Advisor has been discontinued" page.
Thanks!

Fault Device Manager 4.1.0 and C4503E devices

Similar Messages

Maybe you are looking for