Fault pin invalid for PWM out?

LabVIEW for ARM 2009
Luminary chip
Whether the picture options are not checked, no matter Fault pin high or low, PWM Pins always signal output?

It's a rather self explanatory problem. Your axi_pwm_0_PWM_Out is 4 4 bit port but the external pin axi_pwm_0_PWM_Out_pin you defined is single bit only. Make axi_pwm_0_PWM_Out_pin into 4-bit wide and your problem should go away.

Similar Messages

Pin layout for TV out header on RS480M2-il motherboard

Hello,
Does anyone know where I might find the pin information for the TV out header on this board (MS-7093)? I have the version with the COM port on the back panal rather than the TV out connectors, and can't find the MSI TV bracket anywhere, but have found something I could use if I knew which pin carried the composite signal.
Is there any risk of damaging anything if I just go by trial and error; there are five pins on the motherboard, the others being for s-video.
Thanks for any advice,
Frazer

MOBO for ms-7093 RS482M2 http://global.msi.eu/index.php?func=proddesc&prod_no=214&maincat_no=1#
manual for the RS482M2 http://global.msi.eu/index.php?func=downloaddetail&type=manual&maincat_no=1&prod_no=214
The TV out is JTV1
The manual is your friend. Pg 2-17

Pin definition for TV OUT Connector (C&S)

I`ve bought graphic card MSI GeForce4 Ti4200 TD 64MB but there was no the cable for TV connecting. I`ve bought the cable, but it does not work. Do anyone knows the pin definition for " TV_OUT Connector (C&S)", because I can`t find it in user`s guide.

Could you help me? I own a FX 5200 8907 TD128, and the 4 pin S-Video outputs B&W image. The card came with a S-Video to RCA cable, but it isnt useful. Software setting doesnt have an effect. When in the POST the TVoutput is enabled by default and it outputs color images!. Changing PAL from NTSC doesnt have an effect. I did this with 2 RCA TVs and with a VCR. Still Black and White!!!.
I thought i had to buy a new cable but in the setup or during Windows load the outputs works good. May it be a VGA BIOS problem???
PLEASE HELP

Is my 'pin number' for porting out my number the same as my 'billing password'?

Also I'm on a family plan, if there's one 'pin number', does the whole family share that one pin or is it by device?

When you port you need your cell number, your Verizon wireless account number and the account pin. The pin normally is the last four digits of the account owners social security number.
Please note if you are just a line on the master account only the account owner can port the number over to another carrier.
Good Luck

How can I find out my PIN number for my old ipad that has been disabled

I need help to find out my old PIN number for my old ipad it has been disabled as I can't remember what my pin is

http://support.apple.com/kb/ht1212

Error : 907 invalid COD time out

Hello, kindly assist me, I like to download series via my browser but lately I cant download when I do it will give me error: 907 invalid COD time out. I use a blackberry curve 7 9320. I cant even use my blackberry world. Please I need help and I have enough Data on my fone to download. Also I use MTN network. Thank you.

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Resend Service Books (pre-BB10 devices only)
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Reboot
With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Serial number is invalid for Adobe Acrobat Pro 9 within CS4

Hi,
I purchased Adobe CS4 Creative Suite Design Standard. Upon installing the four programs it contains (InDesign, Illustrator, Photoshop and Adobe Acrobat Pro) I keyed in the serial number and InDesign, Illustrator and Photoshop worked fine, but Adobe Acrobat Pro 9 kept showing a red 'X' at the end of the serial key input, saying my "serial number was invalid".
1. Incorrect tech support advice #1: Adobe tech told me to de-install and re-install from Adobe purchase e-mail link only instead of from trial versions. I did this, and then none of the programs worked or accepted the serial number. I went back to trial versions, and again 3 out of the 4 programs took the serial number - all EXCEPT Acrobat.
2. Incorrect tech support advice #2: Opened a case # online and waited a week for some kind of help, but once again got on the phone. This time I was told that the key was to select "Universal English" as the main option. Again I de-installed Acrobat and re-installed. There were no options for "universal English" ( you have to choose between English, Francais and Deutsch). Only when I got to the End User License Agreement was there an option to choose "English (International)". So I did as advised. Once again I entered my serial number and got a big red 'X'. I'm at the end of my Adobe rope.....
Does anyone have any idea how to solve this issue?
Thanks.

oh man, i think i am having a bigger problem now. I tried to uninstall the whole CS4 suite and was prompt to enter my serial key, to my horror, the big red cross appears. Making my serial key invalid for the whole suite. What is going on man. I think this really screw up my system, i am using vista 64. I am going to reformat my computer and try to reinstall, but i did not deactivate. Will this cause my just bought CS4 useless???? I am starting to get worried.

Using Fault handling framework for executing Database procedure

We have a requirement wereby we have API to be executed on Oracle DB which would return a code saying 0 or 1.
I meaning error.
Now with regards to exception handling we require that we receive remote fault we retry for 3 times & if not successful have a email sent out & a human intervention.
This can be easily taken care by having define this in Fault polciy.xml
Another requirement is when the API fails for some reason & we get returncode as 1.Now we would like ot invoke the same policy for this type of error.Although BPEL instance is not failed.But we can throw custom fault.
Now the APi's that we have can be called in 3 ways.
1.In each instance we call API exactly once
2.In each instance we call API in a loop for each record in message.Hence if 10 records are there in message & while executin 7th time it failed then how to handle reminaing records?
3.In each instance we call API only once but submit all 10 reocrds at once.And at same time 7th record fails then whats best way to handle this?
We realy want to use fault handling mechanism because it gives a lot of options of replay rethroew continue...but given the requirement can somebody point out a right way of using fault policy?
Thanks

U can archive the records in archive tables once the database adapter polls the data.
-Ramana.

How can i remove the end pice/pin from my headphones out of my computer?

how can i remove the end pice/pin of my headphones out of my computer?

IF you cannot pull it out with your finger tips, you need to take the machine in for service to an Apple Store or AASP. Doing this type of work yourself could seriously damage the computer so it's best left to professionals.

Error "Value BLANK / SPACE is invalid for acc.asgnmnt.fund" in NWA Conf.

Hello,
We are currently upgrading to ECC 6.0 (from 4.7c) with EA-APPL 603 (SAPK-60303INEAAPPL) and EA-PS 603 (SAPK-60303INEAPS). When I tried to do network activity confirmation from CJ20N, it gave me an error message "Value BLANK / SPACE is invalid for account assignment fund". But then it posted the confirmation with NO actual costs and set the network activity system status to CNF. However, from CN25, with the same error, no confirmation is posted. Had anyone ever have this error from PS perspective (or perhaps in other module)? FYI - no material components assigned to NWA, hence no PR/PO from NWA. Also, FM is activated in our environment.

Hi,
Check out this note,
Note 1106525 - Value Blank/Space is invalid for Account Assignment "Fund"
Might be helpful.
Regards,
Gokul

'The state information is invalid for this page and might be corrupted' error

An admin user added a 'widget' for internet content to be displayed on our intranet (sharepoint). Now, anytime I try to modify the page (it is still checked out) I get this error:
The state information is invalid for this page and might be corrupted.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Web.HttpException: The state information is invalid for this page and might be corrupted.
Source Error:
The source code that generated this unhandled exception can only be shown when compiled in debug mode. To enable this, please follow one of the below steps, then request the URL:
1. Add a "Debug=true" directive at the top of the file that generated the error. Example:
  <%@ Page Language="C#" Debug="true" %>
or:
2) Add the following section to the configuration file of your application:
<configuration>
   <system.web>
       <compilation debug="true"/>
   </system.web>
</configuration>
Note that this second technique will cause all files within a given application to be compiled in debug mode. The first technique will cause only that particular file to be compiled in debug mode.
Important: Running applications in debug mode does incur a memory/performance overhead. You should make sure that an application has debugging disabled before deploying into production scenario.
Stack Trace:
[FormatException: Invalid character in a Base-64 string.]
System.Convert.FromBase64String(String s) +0
System.Web.UI.ObjectStateFormatter.Deserialize(String inputString) +67
System.Web.UI.ObjectStateFormatter.System.Web.UI.IStateFormatter.Deserialize(String serializedState) +4
System.Web.UI.Util.DeserializeWithAssert(IStateFormatter formatter, String serializedState) +37
System.Web.UI.HiddenFieldPageStatePersister.Load() +136
[ViewStateException: Invalid viewstate.
Client IP: 10.10.16.77
Port: 3996
User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; GTB6.4; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; MS-RTC LM 8; InfoPath.2) chromeframe/5.0.317.0
ViewState: 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...]
[HttpException (0x80004005): The state information is invalid for this page and might be corrupted.]
System.Web.UI.ViewStateException.ThrowError(Exception inner, String persistedState, String errorPageMessage, Boolean macValidationError) +267
System.Web.UI.HiddenFieldPageStatePersister.Load() +218
System.Web.UI.Page.LoadPageStateFromPersistenceMedium() +83
System.Web.UI.Page.LoadAllState() +35
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +7350
System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +213
System.Web.UI.Page.ProcessRequest() +86
System.Web.UI.Page.ProcessRequestWithNoAssert(HttpContext context) +18
System.Web.UI.Page.ProcessRequest(HttpContext context) +49
ASP.WELCOMELINKS_ASPX__1775745042.ProcessRequest(HttpContext context) +4
Microsoft.SharePoint.Publishing.TemplateRedirectionPage.ProcessRequest(HttpContext context) +153
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +358
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +64
Should I Publish it then re-check it out to edit or even restore to a prior version?

Try one of the tips in these blog posts:
http://weblogs.asp.net/lduveau/archive/2007/04/17/viewstate-chunking-in-asp-net-2-0-maxpagestatefieldlength.aspx
http://delroger.wordpress.com/2008/08/19/invalid-character-in-a-base-64-string-aspnet/
I suspect that the webpart the user added is putting a large amount of data into the page's Viewstate.
Bryan Phillips
MCT, MCSD, MCDBA, MCSE
Microsoft MVP - SharePoint Services
Blog: http://bphillips76.spaces.live.com
Web Site: http://www.composablesystems.net

ADF Databound Drop Down causes "invalid for working set view object"

I've created a drop-down list per the instructions laid out in the "Creating a Databound Drop Down List in Oracle JDeveloper 10g" HowTo ( http://otn.oracle.com/products/jdev/tips/mills/databound_lists.html ). The list works fine when editing an existing row, but I get the following error when working with a newly created row:
JBO-25048: Operation getAllRowsInRange is invalid for a working set view object.
The drop-down list actually gets populated correctly despite the error. The error only occurs the first time I access the detail page that uses the list. I'm guessing that this may have something to do with the fact that the row value associated with with list is null.
Any ideas on how to workaround this one? Thanks.

Thanks Duncan.
The ViewObject that is bound to the list is only used for the purposes of the list so there shouldn't be any problem with its state being altered elsewhere. Not sure if that's what you mean by collisions or not...
I tried adding a "null/empty" value to the list but the results are the same.
What is meant by "working set view object"? What other types of ViewObject are there? How are they different and how does someone know which operations are valid/invalid?

Error Message F6804 Value Blank/Space invalid for account assignment elemen

Dear Experts,
We have a problem in Travel Management,
I have created a trip for paid by company expenses only and entered cost distribution (fund, funds center and WBS) in the trip.
When I transfer a trip to FI through transaction PRRW throughing error message "F6804 Value Blank/Space invalid for account assignment element for fund and FI313 No funds center entered/ derived in Item".
The paid by com. expenses receipts of wage types credited with - positive amount in 2nd symbolic account offsetting entry and flagged W/CO also the symbolic code linked to linked to Temprary clearing GL it is BS GL .
I checked all the existing threads messages but I did not get solution.
the problem comes up from our upgradation, 6 months back we upgraded to ECC 6.
We don't have any problems in our old 4.7 system still it is working fine.
I created OSS but still they did not solved and they are refering all passed notes.
could any one give the solution to come out from this problem?
Thanks and Regards,
Satya

Hi Satya,
Basically the error is because of Funds Management which you have activated. Please check the note 1268001, 701291, 558295 & 936658 but i dont know will this be helpful or not.
Regards,
S.Srikanth
Edited by: SrikanthS on Oct 26, 2010 11:17 AM

[Exchange-Online][EWS][c#][Windows 8.1] When creating appointment using impersonation "Set action is invalid for property" error occurs.

I have an Outlook add-in that creates appointments to a load of Office 365 calendars. It used to work well but suddenly I have hit a problem.
The basic calling code is
Appointment appointment = new Appointment(exchangeService);
appointment.Subject = subject;
appointment.Body = body;
appointment.Location = location;
appointment.IsAllDayEvent = allDay;
appointment.LegacyFreeBusyStatus = LegacyFreeBusyStatus.Busy;
appointment.IsOnlineMeeting = false;
appointment.Save(SendInvitationsMode.SendToNone);
This still works fine on my own Office 365 mailbox but if I switch to another, using Impersonation, the Save line now throws the error "Set action is invalid for property."
There does not seem to be a problem with impersonation. The line
exchangeService.ImpersonatedUserId = new ImpersonatedUserId(ConnectingIdType.SmtpAddress, selectedUserEmail);
runs OK and afterwards the exchangeService's ImpersonatedUserID gives the correct email address.
If I look at the appointment object in the Watch window immediately after the line that creates it has run I can see that most of the properties have an entry like:
appointment.AdjacentMeetingCount' threw an exception of type 'Microsoft.Exchange.WebServices.Data.ServiceObjectPropertyException'.
Also, several properties including Subject are not listed in the expanded appointment object in the Watch window.
However, entering appointments.Subject explicitly in the Watch window does give the correct result.
I have used the floating watch to check the value of each property straight after it is set and each one is as expected.
I am at a loss as to what to check next and would be grateful for all ideas.
Mike VE

Thanks for the reply Jason. I did as you suggested and found that it was the IsOnlineMeeting that caused the problem. Once that was commented out everything worked as expected. On checking I see that this property is ReadOnly for everyone except the
organizer of the meeting. Clearly the Impersonate role is not regarded as the organiser.
I don't think it is going to matter so long as the user in whose calendar the appointment is created has fully access to the appointment, which seems to be the case.
Thanks for your help.
Mike VE

Class invalid for deserialization

I have got a very simple Session bean. Now I am trying to call a class from this bean with the following error:
class invalid for deserialization
Not sure about the detail about the error but I tried doing lots of things with no success .. Please help!
I have a class (see below) is being called by EJB as showns ..
Row[] arrSort = new Row[marrRows.size()];
arrSort = (Row[]) marrRows.toArray(arrSort);
Arrays.sort(arrSort, new RowComparator());
ArrayList al = new ArrayList(Arrays.asList(arrSort));
----------------------- class source ------------------------
package org.uabhs.svcs.pagination.impl;
import java.io.IOException;
import java.io.Serializable;
public class Row implements Serializable {
public Object[] columns;
public int[] columnSortOrder;
public Row(int[] sortOrder) {
columnSortOrder = sortOrder;
public String toString() {
String sReturn = "";
for (int i = 0; i < columns.length; i++) {
try {
sReturn += (columns.toString() + "|");
} catch (Exception e) {
sReturn += "|";
return sReturn;

The class file was serialized when it was Serializable and it has now been modified to beExternalizable, or vice versa, or it has now been modified to be neither Serializable nor Externalizable.
Leave it alone.
Read the Versioning section of the Serialization Specification before modifying any classes which have been serialized to a permanent store, e.g. a file or a database. You can do some things, provided you keep the serialVersionUID constant, but any of the changes described are out, especially the last above, which is plain unreasonable.

Fault pin invalid for PWM out?

Similar Messages

Maybe you are looking for