Faulty hp pavilion g6 hard disk/drive

Sir I Purchased Pavilion g6 notebook on 08 Oct 2012. Particulars are as under :-
Model - g6-2102TX,  Ser No - 5CD22021X6, Product No - B6U30PA#ACJ, Processor - Intel (R) Core (TM) i3-2370M [email protected], RAM - 2.00 GB, System Type - 64 Bit Operating System, Windows 7 Home Premium.
While on restarting the system the following message displayed on the screen :-
Hard Disk Error
Please run the Hard Disk Test in System Diagnostics
Hard Disk 1 (3F1)
F2 System Diagnostics
For more information please visit www.hp.com/go/techcentre/startup
Again when i switch off the power and further switch on the the system, system will booted and not displayed such messages. However, the system take too much time for processing every works  and hanged for 10-15 seconds in every action. I reinstalled two times the Operating system and once formatted the entire hard drive and reinstall the entire software using Recovery CDs. But system is same as displayed the message while on restarting and too delay in performance. Kindly advice me for further action

Sounds like the hard drive is failing and will need to be replaced. If you are still in warranty HP will send a replacement. If not a retail laptop SATA hard drive can be used. Just be sure to get one of at least equal capacity as the original in order to use Recovery Discs. It can be larger, but not smaller capacity.For instance you have a 500GB hdd  so you could use a 750GB hdd but not a 320GB hdd.
Maintenance and Service Guide shows how to change hard drive:
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?amp;cc=us&dlc=en&lang=en&product=top&cc=us&dlc=en&...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Similar Messages

  • Just bought a Lenovo 3000 N200 without a hard disk drive, need software

    I just bought a Lenovo 3000 N200 Type 0769-BLG assembly date 07/09 from e-bay, it looks brand new but it had a fault, it was dead, perhaps a faulty motherboard and the hard disk drive had been removed.  Assuming I can get the fault fixed, where can I get the Lenovo software that came with the original hard disk drive, I would prefer a free source, if that is possible, perhaps some kind person has put all of the CD's on to a DVD that I can borrow or buy a copy of. I was an IBM employee for 30 years before retiring 15 years ago. Dan McLean in Scotland, UK.

    Call customer service directly to get a quick solution for this.
    IPnaSh
    First Spanish Community Guru - Colaborador ad honorem

  • Hard disk drive replaicement

    I have a Hard Disk 1 (301) error message, when turning on my laptop. It says something along the lines of "the hard disk has detected an imminent failure".
    My laptop is a HP Pavilion G7-1033cl   (windows 7), purchased in 2011,  so it's out of warranty.
    As far as a noticed in some other answers, I shoul replace the hard-disk for sure.
    Ok, my question is: What kind of hard disk shoul I buy for replacing it? What's the best recommended?
    Thank you for your help!
    GStoicu

    Whenever the Hard Disk fails with an error Hard Disk 1 [301] that indicates that the Hard Disk Drive has failed and that requires a replacement to resolve the issue
    This issue could be due to Application or driver conflicts, virus issues, file corruptions due to incompatible applications, improper shutdowns, update failures due to conflicts, sudden power surges, if notebook is dropped etc..
    HP will provide a replacement Hard Disk Drive if the Notebook warranty is Active, If not you need buy a SATA Hard Disk Drive from a retail shop nearby
    Please make sure you are getting at least equal capacity as the original one in order to use Recovery Disks. If you need you can buy a larger, but not smaller capacity Hard Disk Drive. For example if you have a 500GB Hard Disk Drive you can upgrade it to 750GB Hard Disk Drive but not 320GB Hard Disk Drive
    Please try the below shown troubleshooting steps once:
    Step 01. Remove the battery and unplug the AC/Power Adapter
    Step 02. Press and hold the Power button for more than 30 Seconds
    Step 03. Plug in the AC/Power Adapter (leave the Battery out for now)
    Step 04. Press the Power button and check if the Unit works normal
    If the above mentioned steps does not help, then you can try reseating the Hard Drive on your Notebook
    If the issue persists again please Contact HP if your HP Notebook is under warranty, HP would replace the Hard Disk Drive and provide you a Recovery media to restore factory operating system after replacement (if you've not yet created Recovery Discs/USB Media)
    Note: Back up all the personal data to an external drive if it's possible. Otherwise you could connect the failed HDD via SATA to USB adapter with another PC or same PC after replacement of HDD & re-installation of OS and try copying /recovering the files. You can also refer to the below shown link for further support
    http://www.wikihow.com/Recover-Data-from-the-Hard-Drive-of-a-Dead-Laptop
    Please click on the link In order to Identify, Prevent, Diagnose & Recover from Drive Failures on HP Notebook Hard Drives & Solid State Drives :
    http://h10032.www1.hp.com/ctg/Manual/c02876562.pdf
    You can Check your warranty Here to verify the status and Click Here to order a new Hard Drive
    Hope this helps, for any further queries reply to the post and feel free to join us again
    **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • Comparison of SSD with hard disk drives

    Attribute or characteristic
    Solid-state drive
    Hard disk drive
    Spin-up time
    Instantaneous.
    May take several seconds. With a large number of drives, spin-up may need to be staggered to limit total power drawn.
    Random access time[45]
    About 0.1 ms - many times faster than HDDs because data is accessed directly from the flash memory
    Ranges from 5–10 ms due to the need to move the heads and wait for the data to rotate under the read/write head
    Read latency time[46]
    Generally low because the data can be read directly from any location; In applications where hard disk seeks are the limiting factor, this results in faster boot and application launch times (see Amdahl's law).[47]
    Generally high since the mechanical components require additional time to get aligned
    Consistent read performance[48]
    Read performance does not change based on where data is stored on an SSD
    If data is written in a fragmented way, reading back the data will have varying response times
    Defragmentation
    SSDs do not benefit from defragmentation because there is little benefit to reading data sequentially and any defragmentation process adds additional writes on the NAND flash that already have a limited cycle life.[49][50]
    HDDs may require defragmentation after continued operations or erasing and writing data, especially involving large files or where the disk space becomes low. [51]
    Acoustic levels
    SSDs have no moving parts and make no sound
    HDDs have moving parts (heads, spindle motor) and have varying levels of sound depending upon model
    Mechanical reliability
    A lack of moving parts virtually eliminates mechanical breakdowns
    HDDs have many moving parts that are all subject to failure over time
    Susceptibility toenvironmental factors[47][52][53]
    No flying heads or rotating platters to fail as a result of shock, altitude, or vibration
    The flying heads and rotating platters are generally susceptible to shock, altitude, and vibration
    Magneticsusceptibility[citation needed]
    No impact on flash memory
    Magnets or magnetic surges can alter data on the media
    Weight and size[52]
    The weight of flash memory and the circuit board material are very light compared to HDDs
    Higher performing HDDs require heavier components than laptop HDDs that are light, but not as light as SSDs
    Parallel operation[citation needed]
    Some flash controllers can have multiple flash chips reading and writing different data simultaneously
    HDDs have multiple heads (one per platter) but they are connected, and share one positioning motor.
    Write longevity
    Solid state drives that use flash memory have a limited number of writes over the life of the drive.[54][55][56][57] SSDs based on DRAM do not have a limited number of writes.
    Magnetic media do not have a limited number of writes.
    Software encryption limitations
    NAND flash memory cannot be overwritten, but has to be rewritten to previously erased blocks. If a software encryption program encrypts data already on the SSD, the overwritten data is still unsecured, unencrypted, and accessible (drive-based hardware encryption does not have this problem). Also data cannot be securely erased by overwriting the original file without special "Secure Erase" procedures built into the drive.[58]
    HDDs can overwrite data directly on the drive in any particular sector.
    Cost
    As of October 2010, NAND flash SSDs cost about (US)$1.40–2.00 per GB
    As of October 2010, HDDs cost about (US)$0.10/GB for 3.5 in and $0.20/GB for 2.5 in drives
    Storage capacity
    As of October 2010, SSDs come in different sizes up to 2TB but are typically 512GB or less[59]
    As of October 2010, HDDs are typically 2-3TB or less
    Read/write performance symmetry
    Less expensive SSDs typically have write speeds significantly lower than their read speeds. Higher performing SSDs and those from particular manufacturers have a balanced read and write speed.[citation needed]
    HDDs generally have symmetrical read and write speeds
    Free block availability andTRIM
    SSD write performance is significantly impacted by the availability of free, programmable blocks. Previously written data blocks that are no longer in use can be reclaimed by TRIM; however, even with TRIM, fewer free, programmable blocks translates into reduced performance.[25][60][61]
    HDDs are not affected by free blocks or the operation (or lack) of the TRIM command
    Power consumption
    High performance flash-based SSDs generally require 1/2 to 1/3 the power of HDDs; High performance DRAM SSDs generally require as much power as HDDs and consume power when the rest of the system is shut down.[62][63]
    High performance HDDs generally require between 12-18 watts; drives designed for notebook computers are typically 2 watts.

    I wish I could get my head round the SSD vs HDD with a NLE rig.  My builder is trying to persuade me to use a Toshiba 256Gb THNSNC256GBSJ for OS and programs, and it is only NZ$20 more expensive than the 450Gb 10k rpm VelociRaptor I was originally planing to use for the OS.  That sounds suspiciously cheap to me, and I am concerned about the finite writes to SSD - mainly because I don't really understand it.  
    The rest of the new build is
    3930K
    Gigabyte X79-UD5
    8 x DDR3 1600
    Coolermaster with 750W PSU
    Geforce GTX570
    I plan to transfer the drives from my current system as a starting point, and reassess after giving it some use.  That means
    Either the above SSD or 450Gb 10k Raptor for OS (new drives)
    300Gb 10k rpm Raptor  (currently used for OS in old box)
    150Gb 7k4 rpm Raptor (reserved for Photoshop Scratch in old box)
    2 x 1Tb WD Blacks (data drives)
    2 x 1Tb WD USB3 externals
    I don't know how I would configure the drives in the new box, but have seen Harm's table and will try to follow his advice.  It's a dreadful thing to admit, but I don't have a backup strategy, and the above drives are well over half full. Well over!  And I am only just getting serious about video, (the rest is mainly CR2 files from my Canon 1Ds3 and 1D4)
    I know it must be like banging your head against the wall, but should I avoid that SSD and go with the 450G Raptor?   I have read a comment that the WD Blacks don't work well as Raid0.  Is that BS or true?
    I am about to give the go-ahead so need to confirm the spec.

  • I can't copy my itunes library to an external hard disk drive!!

    this is my first time at the forum and i dont find a better way to ask, i want to copy my itunes library to an external hard disk drive for have a back up, but when i try to copy it it appears this message "the item "itunes music" has 1 or more items that are in use and cannot be modified", i dont know why, then i search for help in apple support and this article http://support.apple.com/kb/HT1751, but i do what it says and i still having my problem, i can't copy my music, that message keep's appearing and it dont let me copy my music.

    forget it i discover my problem, this message gives u 2 option stop or continue i just click continue and it get copied, i think this is normal but like this is my fisrt time i dot this i get confused, i think i still used to windows, i cant believe because i have a ear with this computer. well anything is a good experience.

  • How can I optimize my hard disk drive usage and performance in Windows 8 or Windows 7?

    QuestionHow can I optimize my hard disk drive usage and performance in Windows 8 or Windows 7?
    AnswerThere are a few simple steps you can take to ensure your hard disk drive is used optimally.
    Use Toshiba HDD Protection
    Many Toshiba laptops come with a program called Toshiba HDD Protection pre-installed. This program helps to protect your hard disk drive from being damaged due to falls or impacts. By default, it should already be enabled. You might be tempted to lower the detection levels in this application, but doing so could cause your hard disk drive to be damaged. Remember that while the application can reduce the chance of damage, you should still avoid allowing the laptop to fall or suffer rapid impacts.
    For more information on this utility, see the following article:
    TOSHIBA HDD Protection
    Optimize the drive
    Windows 8 and Windows 7 optimize hard disk drives automatically through a process called defragmentation. Unless you've disabled this, you don't need to do anything. If you have disabled this and want to run the process, you can still do so.
    In Windows 8, search for "Defrag" at the Windows Start screen and select "Defragment and optimize your drives."
    In Windows 7, search for "Defrag" in the Start Menu's search field and select "Disk defragmenter."
    You can use this tool to optimize your hard disk drives, allowing Windows to find needed files faster.
    Remove items from startup
    Some applications run automatically when Windows starts. This can add additional functionality, but it also decreases the performance of your computer. Sometimes you might want to disable certain programs from starting automatically.
    In Windows 8, search for "Task Manager" at the Start screen. Select the "Startup" tab. Select an application you'd like to disable from starting automatically and then click the "Disable" button in the lower-right.
    In Windows 7, type "msconfig" in the Start Menu's search field and press ENTER. Uncheck the boxes next to applications you'd like to disable from starting automatically.
    You should be sure of the purpose of an application before disabling it from starting automatically. Some applications might be important. If in doubt, you might consider searching on the Web to discover more information about a program. Remember that if you find that you disabled something vital, you can always re-enable it.
    For more information, please see the following video:

    QuestionHow can I optimize my hard disk drive usage and performance in Windows 8 or Windows 7?
    AnswerThere are a few simple steps you can take to ensure your hard disk drive is used optimally.
    Use Toshiba HDD Protection
    Many Toshiba laptops come with a program called Toshiba HDD Protection pre-installed. This program helps to protect your hard disk drive from being damaged due to falls or impacts. By default, it should already be enabled. You might be tempted to lower the detection levels in this application, but doing so could cause your hard disk drive to be damaged. Remember that while the application can reduce the chance of damage, you should still avoid allowing the laptop to fall or suffer rapid impacts.
    For more information on this utility, see the following article:
    TOSHIBA HDD Protection
    Optimize the drive
    Windows 8 and Windows 7 optimize hard disk drives automatically through a process called defragmentation. Unless you've disabled this, you don't need to do anything. If you have disabled this and want to run the process, you can still do so.
    In Windows 8, search for "Defrag" at the Windows Start screen and select "Defragment and optimize your drives."
    In Windows 7, search for "Defrag" in the Start Menu's search field and select "Disk defragmenter."
    You can use this tool to optimize your hard disk drives, allowing Windows to find needed files faster.
    Remove items from startup
    Some applications run automatically when Windows starts. This can add additional functionality, but it also decreases the performance of your computer. Sometimes you might want to disable certain programs from starting automatically.
    In Windows 8, search for "Task Manager" at the Start screen. Select the "Startup" tab. Select an application you'd like to disable from starting automatically and then click the "Disable" button in the lower-right.
    In Windows 7, type "msconfig" in the Start Menu's search field and press ENTER. Uncheck the boxes next to applications you'd like to disable from starting automatically.
    You should be sure of the purpose of an application before disabling it from starting automatically. Some applications might be important. If in doubt, you might consider searching on the Web to discover more information about a program. Remember that if you find that you disabled something vital, you can always re-enable it.
    For more information, please see the following video:

  • Satellite M30X - high hard disk drive utilization

    After login in Windows XP (SP2), my toshiba laptop is very slow. The hard disk drive light is continuously on for 5 minutes. I've looked at the task manager, but CPU utilization is low and RAM usage is low. There is no program that seems to use a lot of CPU or RAM.
    I've actually turned off the paging file to see if the problems due to intensive use of the paging file on the HDD, but problem persists. The model of the laptop is Satellite M30X-113.
    I don't know if it's related, but this problem arose around the time that I've taken out a 256 MB RAM module and installed a 512 MB one (making the total ram memory 1024 MB).

    Hi
    > I don't know if it's related, but this problem arose around the time that I've taken out a 256 MB RAM module and installed a 512 MB one (making the total ram memory 1024 MB).
    If this issue has begun after installation of the new memory module then I would say that the new memory module is responsible for this issue.
    You could also try to put back the 256MB module to check if the issue still persist.
    This would be the easiest way for checking

  • Can I upgrade MacBook Pro hard disk drive next year?

    Hi there!  I'm new to the Apple Support Communities! 
    I am going to buy a new 13" MacBook Pro, 2.5GHz.  I am going to buy the base model, with a 500GB 5400 RPM hard disk drive.  Right now, I can't afford a 256GB solid-state drive, but I'll have enough for one by later next year.  So, I will have done some stuff on my Mac by the time I can upgrade it. I know how to install the drive itself, but how do I transfer my information?
    Here are the issues:
    1) I don't know how I would make it so I could boot from an external USB. 
    2) And I don't know how to get all my personal information from one drive to the other. 
    For "2", I think I could back up my Mac to a hard drive with Time Machine, and then restore from a backup.  But Time Machine couldn't back up the whole OS, right?  And what would the procedure be anyway?  Just turn it on when I'm done the upgrade?
    If someone who has done this before could provide step-by-step instructions, I would really appreciate it!
    Thanks,
    Solid-State Me 

    Yes you can replace the hard drive at any time.  Purchase a replacement drive from any store you like - newegg or mcetech are good stores (among many others) - and when you purchase the new drive, also purchase a drive enclosure.  Then download a program called "super duper" and follow the instructions to use that software.  When your drive arrives, put the new drive in the enclosure, plug it in to your computer and run "super duper" with the option to "make the drive bootable" and let it finish.  What it's doing is copying your drive onto the new drive.  Once the copy is finished, you can shut down your computer, remove the drive, install the new one, and put the original drive into the enclosure.  Now you have an external hard drive that is repurposed instead of throwing it away.  Keep that drive intact for a few weeks without erasing or adding data to be sure you are happy with the new drive and how it performs.  After that, use the drive to store files, backup the internal, transfer stuff, whatever.

  • Hi there! yesterday I installed Mavericks on my Macbook. Since then, it doesn't mount my external hard disk drive anymore, which he did a week ago (without the update). Is there anyone out there who knows a solution?

    Hi there! Yesterday, I installed Mavericks on my Macbook. Since then, it doesn't recognize my external hard disk drive anymore (at least not on the desktop. In Germany they call it "it doens't mount it". I don't know if it's the same expression in english?)
    I just used it a week ago, before I did the update and it worked perfectly fine.
    Is there anyone out there who knows a solution for this problem? I've been googleing for hours now and can't find any answer.
    Thank you!!!

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Is it possible to upgrade the internal Hard disk drive on the iMac

    Is it possible to upgrade the internal Hard disk drive on the iMac?

    Yes but it's definitely not advised. If you have a machine newer than 2009 Apple uses drives that have integrated heat sensors. This makes upgrading much more difficult but not impossible. If you have a machine still under warranty then definitely DO NOT do this yourself as you may void the warranty not to mention it isn't for the faint of heart. Take the machine to an AASP to have the work done, you will need to find one in your area willing to do so.
    If you are considering a new machine then simply buy the configuation you need.

  • Dismount multiple external hard disk drives

    I have multiple external hard disk drives and was wondering what the command line is that will dismount all of these at once? Note that there is also one external DVD unit as well which I would not want to dismount.
    Thanks,
    Lyman

    diskutil unmount "/path/to/disk";diskutil unmount "/path/to/disk";diskutil unmount "/path/to/disk"
    Just replace replace "/path/to/disk" with the path to the mount point, leaving the quotes.
    Good luck!

  • Replacing SSD with hard disk drive on Qosmio X505-Q880

    Is it possible to replace the SSD drive in a Qosmio X505-Q880 with a hard disk drive?  If so what type will work?
    Thanks,
    Ed

    Yes. I just replaced my 60 gig with a Kingston 240gig from Amazon. Re installed Windows 7 Ultimate. I DID NOT use the recovery disk from Toshiba because there were many programs that did not suit my needs, excellent though they were. It runs very fast about 4 times as fast as my old drive.

  • Increase the hard disk drive capacity on a MacBook Air

    is it possible to increase the hard disk drive capacity from 64 to 128 G? How do I do it?

    It would appear Apple does not intend for you to do it.
    It might be possible, if expensive.
    I would consider an external drive.
    increase flash storage on macbook air
    Can one upgrade Flash Storage
    Re: macbook storage upgrade??
    increase flash storage on macbook air

  • Hard disk drive doesn't appear on home screen

    I have a external hard disk drive in NTFS. I have there a lot of data I need to transfer to my new Mac, so I can't erase nothing from there. I installed MacFUSE and Paragon 9 to correct the issue, but after that, the drive just didn't appear anymore on the home screen. It is in Disk utility (in grey color), but I can't mount it  and the Fix Disk doesn't help at all. So now I have hard disk drive that doesn't appear to even exist, even the system can find it.
    Can anyone say anything constructive?

    Look on the other screens (swipe left).  If desired, move it to the first screen.
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

  • I have a hard disk drive with data that i want to back up onto another hard disk drive. I tried just copy and it won't let me paste it in the new drive. I have also tried to drag the files across and they won't go across. Does anyone know how to do this?

    I have an external hard disk drive with data that I want to back up onto another extrnal hard disk drive. I have tried to copy and paste but this wont give me a paste option. I have also tried to click and drag but it wont let me either. I have reformatted the external hard drive to accept both mac and pc files and this did not make any difference. Can anyone help me with this?

    How did you reformat the drive? If you formatted it as NTFS, your Mac will not be able to write files to it unless you use a small application such as Paragon's.
    Please reply as to how you formatted the drive.
    Clinton

Maybe you are looking for

  • How to print a page in jsp?

    hello to every one... i made a report and when i click on print's link which is on my report page of jsp,a new popup window opens which show the report plus i want that when ever popup wndow open ,file->print... option should also be open..how can i

  • Usage of BAPI_NETWORK_MAINTAIN

    Dear All,     I have a requirement where in I have to delete multiple activities from a network using a Z transaction and then renumber the existing activity numbers.     For deleting the activities, currently I have used BAPI_NETWORK_MAINTAIN with m

  • Changing my number?

    I am getting the blackberry curve 8530 sometime this week & i was wondering if its free to change your number when you get a phone. This person is literally harassing me by texting me every single day and calling me even though i ignore that person,

  • Add Buddy

    I can not add a new buddy to my Bubby List. What is "Feedbag error 10" mean??????????????????????? please advise.

  • Restore Image not working...

    Part of an issue still unsolved My situation: I just got a new hard drive for the MacBook today, the 200 GB Toshiba. I'm replacing the 60 GB drive that came with the computer, so before I removed it, I was sure to make an image of the entire 60 GB dr