Faulty internet after software-update

I have recently severe problems with Safari:
- freezing or endlessly spinning beachball
- some pages not loading
- often having to click twice to open a page
- very slow loading of video files or video files that stop loading.
Sometimes stopping the opening of the page and immediately reloading helps.
I have similar problems with Firefox and Camino.
Also SSH works badly.
Emptying the cache and disabling plugins didn't help.
I re-installed OS-X and the bundled software. Everything was fine then until I downloaded the updates. In order to be able to write to this forum I re-installed again without updating.
Our home-network seems fine since a Mac G4, a laptop with Linux and a desktop with Windows work flawlessly.

FWIW, I'm having the same kind of problems after an update, with Safari, Firefox, and Camino. All pages now seem to load EXTREMELY slowly, and lots of Safari beachballs. I've also tried switching ports on my router, with no luck.

Similar Messages

  • Cannot connect to internet after software update

    I have an old powerbook G4 running Mac OS X 10.3.9 (this is one of 3 macs) I also have an airport Extreme and an airport Express to make a network in my home. Frequently, after a software update to the old computer, it has trouble getting back on to the internet. Usually, adjusting access to the Keychain fixes this.
    Now, after a software update last week--I cannot get on the internet with this computer at all. The computer is connected to the network, the password is in the keychain, the signal is strong (all of the other computers can get on to the network)--but whenever I try to get on, I get 'cannot connect to the server'.
    (btw, Last evening, the issue resolved itself for about 3 hours--I don't know why--but today it is out again.) Can anyone help?

    Hi, Rathh. Always use Disk Utility to repair permissions immediately after installing any software update that uses Apple's Installer application, or that is installed by the Software Update function accessed through the Apple Menu.

  • Connection to Internet After Software Update

    I updated my mac computer with a software update today, I restarted it, and now it will not connect to the internet or check for more updates.  Please help!

    Click the Wifi logo at the top of the screen and forget network and start again.

  • Safari not connecting to internet after software update

    I have just completed a software update and now safari will not connect to our wireless internet... airport says it has full bandwidth and other macs connected to the wireless connection are working without any fault.... has anyone got any ideas????
    Thanks!!

    Hello Sarah:
    As you probably have already guessed, quite a number of things might have happened.
    My network is Ethernet, so I am not much help with wireless networks. However, I think I would (if I were you), run an archive and install:
    http://docs.info.apple.com/article.html?artnum=107120
    An archive and install will place a fresh copy of OS X on your system while, at the same time, preserve your files, programs, and settings. It is always a good idea, however, to have a good backup strategy before any software changes. You should then run software update to bring your system to a current level (in your case, OS X 10.4.11 is current, I think).
    The A&I should eliminate any system software issues.
    Barry

  • Can't connect to internet after software update to iBook G4

    I recently installed updates to itunes, quicktime, and the the latest security update for os x 10.3.9 on my iBook G4. Now I can't connect to the internet via my airport express. This happened the last time I updated the software, but I can't remember what I did to fix it. Can anyone help?

    I am experiencing the exact same problem with my sister's laptop. iBook G4 10.3.9 I just installed Security update 2007-008 and quicktime update. After the reboot her airport connected to the house router, but will not acquire an IP address. The other computers in the house have remained connected to the router without change. I have a another iBook G4 running on 10.4.11 with the same network settings and I have no trouble whatsoever. I re-enetered the WAP password, reorganized the network connection priorities and repaired permissions, but cannot get the computer to acquire an IP address.
    Any ideas??

  • HT4623 My iPad is not connecting to internet after software update what can i do

    Hi everyone I just update the software 7.0.4 on my iPad 2 and after doing that cannot connect to internet, can somebody tell me
    what to do to correct this issue? Please 

    You can try resetting your iPad by simultaneously pressing and holding the Home and Sleep/Wake buttons until you see the Apple Logo. This can take up to 15 seconds so be patient and don't release the buttons until the logo appears.
    Try again to see if the problem persists.
    If yes you can try resetting your Network Settings. Settings > General > Reset > Reset Network Settings. Note that you will have to re-enter all of your WiFI passwords.

  • Can't connect to internet after software update

    I just downloaded todays (3-1-2006) security update from apple. Once I rebooted my ibook I wasn't able to connect to the internet anymore. Any ideas why?
    My internet connect is still good as I am typing this on my wifes ibook just fine.
    thanks

    Mike,
    Check my post on the "Customization" thread in reply to "Onthegomike." I experienced a similar problem with my desktop and was able to resolve it. I have not yet downloaded the Security Update to my laptop; however, I'm sure I'll have to go through hoops again once I do that. Repairing permissions before and after sometimes helps, however, I often have to go through the disconnection of my airport express before I'm up and running on the iBook.
    eMac, iBook   Mac OS X (10.3.9)   1 Ghz G4, 768 mb ram

  • Can't connect to internet after software updates to ibook g4

    I recently installed updates to itunes, quicktime, and the the latest security update for os x 10.3.9 on my iBook G4. Now I can't connect to the internet via my airport express. This happened the last time I updated the software, but I can't remember what I did to fix it. Can anyone help?

    You might have better luck posting in the OS X forum. This forum is for the iPhone.

  • HT5642 ipod won't connect to internet after software update

    Help. I can't get my ipod to connect to my wifi since I downloaded the new update.

    Does the iPod connect to other networks?
    Does the iPod see the network?
    Any error messages?
    Do other devices now connect?
    Did the iPod connect before?
    Try the following to rule out a software problem:                 
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on the router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - iOS: Recommended settings for Wi-Fi routers and access points
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar

  • Very slow internet after Mavericks update. Opening websites very slow. Console info here. 9/25/14 11:12:51.416 AM com.apple.launchd[1]: (com.apple.qtkitserver[22059]) Could not terminate job: 3: No such process 9/25/14 11:12:51.416 AM com.apple.launc

    Very slow internet after Mavericks update. Opening websites very slow. Console info here. 9/25/14 11:12:51.416 AM com.apple.launchd[1]: (com.apple.qtkitserver[22059]) Could not terminate job: 3: No such process 9/25/14 11:12:51.416 AM com.apple.launc

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home.  After software updates, Apple support suggested I reboot my router which works.  But now I have to do it every other day.  ????

    Ever since I received my Macbook Pro in July 2011 I've had issues with my wireless connection at home.  After software updates, Apple support suggested I reboot my router which works.  But now I have to do it every other day.  ????  AT&T my DSL carrier suggests I get a new router.  Apparently the one I have is really old and doesn't support my Macbook Pro.  Does this sound right?

    If your using WEP encryption yes, Apple has discontinued that becaues it's worthless. WEP (and WPA) is cracked so encryption makes no sense.
    Get a new Wireless N router, set it up with WPA2 (AES) Personal and two different 20+ randon letter/numbersymbol character passwords
    One for Admin access only of the router, keep this on paper off all comptuers in a safe someplace.
    One for entering into devices, computers etc for Internet Access Only.
    You need the long and random password to defeat brute force attacks by GPU software that the hackers have now.
    Also if you give out the password to another, they can't hack the network with the guest access password.
    Computers remember the internet password, so anyone with access to your machines or network will have the password.
    Since you have another Admin only password, they can't hack in. got it?
    You don't need "Invisible" or "MAC Address filtering" that's a waste of time as hackers can sniff a network and causes issues getting on the network.
    Good luck.

  • Ipod touch4g  is not detected in pc and itunes after software update

    after software update is done. when i connect my ipod touch it is not detected in pc (windows 7) and in itunes please help me anyone.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • New iPad with retina display with 30 pin connector mirroring to TV with dvi adapter problems after software update

    Hi. Good day to everyone my New iPad with retina display 30 pin connector will not mirror to TV even with divi adapter after software update. Adapter works fine. Or is it a software glitch with IOS 7.04? I've tried resetting and reconnecting nothing seems to work.

    That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
    So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
    But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

  • IPhone went bad after software update - iPhone 5 is now stuck on Itunes connect and has vertical lines

    iPhone went bad after software update - iPhone 5 is now stuck on Itunes connect and has vertical lines.
    I found a video on youtube with similar issues - http://youtu.be/Xuuqxx18-bA
    EVERYTHING HAS BEEN TRIED: Restore, Reboot, Recycle, Replacing Cables, etc....
    I don't have Apple Care, what to do? Spend more money and buy a new phone?

    Here is another person who has a problem with the iPhone 5 screen https://www.youtube.com/watch?v=sc1ZPWSA8dc and they have just received them NEW!!!!!
    I myself, two days ago purchased a  2nd hand iPhone 5 that was advertised as having a line of squares at the bottom of the screen. I Googled it and found people saying it was a screen issue and to replace the screen, so I did this and it is still happening with a new screen.
    I am starting to dislike Apple intensely after reading forum posts and watching videos where people are asking for help and telling us about issues that they are having with their phones.
    Why is Apple getting it so wrong with their updates and manufacturing that they are completely destroying iPhones that cost a lot of money and then expecting the owner to purchase another phone unless they are still in warranty.
    Apple you should be going out of your way to put things right for people but instead there is a wall of silence over so many of the issues destroying peoples phones.
    SHAME ON YOU!

  • Thin white line acroos the top of my screen after software update. Can NPRAM reset help to solve this or is it a permanent pixel problem?

    Sudden thin white line acroos the top of my screen after software update. Can NPRAM reset help to solve or is it permanent pixel problem?

    Try PRAM reset.
    Reset PRAM:   http://support.apple.com/kb/PH14222
    Best.

Maybe you are looking for

  • Why am I getting this error message, "Disk is too slow. (Prepare) (-10001)"

    Hello all!  I've been using GarageBand for a while now and I've accumulated quite a few files.  Along with all of my movies and iTunes library, my internal hard drive filled up rapidly and I didn't catch it.  I received a warning message on my screen

  • Calling a BOR method

    Hi All, There is a particular method in a BOR object (T-Code SWO1)which needs to be invoked from a report program . Please tell the method of declaring the same in the program and calling the same in the report program. Urgently needed .... Thanks in

  • Reset audio volume

    I'm not sure where to post this question, but here goes. Is it possible to reset the audio on my mac so that the sound volume of video clips and movies is raised? I regularly encounter video with audio volume that is too low, even though I have the v

  • Bridge CC: Added Contactsheet = I/O Error

    Hey there, i already read the discussions in this forum about this really bad decision and issue. and my opininion is the same as the others: why has adobe deleted this great feature?? the contactsheet in photoshop is a big joke and not helpfull for

  • File Structure into Document?

    I was wondering if anybody might know of a way to export a file structure - and the files included - into a text document, either in Word or Pages, or maybe better yet Excel. I have a huge list of media files that are subfoldered and organized, and I