Faulty status found for DataStore ZSD_O01

hi
we are getting an error message while loading the custom ODS. following are the fault status..
Activation of M records from DataStore object ZSD_O01 terminated.
Faulty status found for DataStore ZSD_O01 (see long text).
the long text is as below..
The status manager of the DataStore object ZSD_O01 has an unexpected status. The detailed message:
"Data Package Entries Found After Load Complete"
please suggest the solution....
ravindra

Are there any requests present in the DSO???
Try deletion and doing init and delta (or full load if it is full)
If you are having issues in that then let us know .
Regards,
rocks

Similar Messages

Faulty status found for DataStore

Hi
the request in the ODS store object is blocked... The request is red, but data are partialy activated... I try to delete the request but the followed error occurs
Faulty status found for DataStore
The activation failed and the delete of request failed...
I use BI 7 with SP 18.
I check and the data into table ODSNAME40 exists.

Hi Pipes,
We got the same issue.Can you please let us know how its resolved.
We loaded delta request into ODS and its failed.Request is not deleting when we are trying to delete its throwing below error messsages,
Faulty status found for DataStore XXXXX (see long text)
Message no. RSODSO_TOOLS005
Diagnosis
The status manager of the DataStore object XXXXX has an unexpected status. The detailed message:
"Data Package Entries Despite Completed Operation"
We are in BI -7.0 Patch level 20.
Thanks in Advance.
Edited by: sirisha Nekkanti on Jul 29, 2009 11:54 PM

Error: License File Exception (check the log file for details): ENT_PE_NODE not found in datastore

Hi;
i have install 2 MCS 7816 (publisher and suscriber) with call manager version 6.1, i have load the files licenses for the publisher and the phones, but when i load the file license for the suscriber in publisher server i had the error messeage :
Error : License File Exception (check the log file for details): ENT_PE_NODE not found in datastore
what s the solution.
Thanks for your help

Hello,
I seen this issue before, all you have to do is Contact Cisco Licensing team. In order to generate new licenses for your server.
Thanks,

GNU fortran90 doesn't work now. I get the error message:gfortran: warning: couldn't understand kern.osversion '14.0.0 ld: library not found for -lcrt1.o collect2: error: ld returned 1 exit status

GNU fortran 90 no longer works.
I get the error message:
gfortran: warning: couldn’t understand kern.osversion ‘14.0.0
ld: library not found for -lcrt1.o
collect2: error: ld returned 1 exit status

GNU fortran 90 no longer works.
I get the error message:
gfortran: warning: couldn’t understand kern.osversion ‘14.0.0
ld: library not found for -lcrt1.o
collect2: error: ld returned 1 exit status

Status Change for Purchase order in Process Purchase order

Hi All,
We have implemented SRM 4.0 with Extended Classic scenario.
SRM does provide standard status for Process Purchase order worklist (such as Ordered, Held, Error in Process etc.). Is there any BADI i can use to overright my own status message for the PO.
To give brief background of the requirement. Client wanted status to be changed to "Cancel" For POs whose all the line items we have deleted or "Close" when Last delivery or Final Invoice check is ticked.
I am aware that i can use BBP_DOC_SAVE_BADI as structure BBP_PDS_ITEM i can get items deletion indicator. But will i able to change the standard Status message?
Presently even though all line items marked delete still shows PO as "Ordered" status.
Kindly let me know if i can acheive with anyway.
Thank you
Ritesh

Hi Masa,
Thank you for your response. I have few doubts about the configuration which you have suggested.
- Define Status schema for User status will create a status Profile in which i have to include my own status. In the document of Define Status Schema it specifies that After creating User profile you have to assign same profile to transaction types. (I.e. BUS2201 or BUS2121 etc).
My concern is will my own status profile over-write the standard status which is coming? such as Ordered, Created, Transmission fail etc.
If so then do i have to create status profile to include all the Standard Status message in it as well?
- Other thing i found that Ordering PO goes through many standard status message (COMP, CRTD, CTRA, DCOM, ORDR) and always the last status in the Hearder will display on ITS level. Is my understanding right?
- I found that there is a standard system status message I1045 (BECN Cancel) Can i use this through BADI?
Kindly let me know.
Thank you once again.
Regards
Ritesh

Can someone tell me how to fix this error in 10.4.11 on a G5 Quad Core 2.5GHz Tower...A valid video device could not be found for playback. [-70017]

Can someone tell me how to fix this error in 10.4.11 on a G5 Quad Core 2.5GHz Tower...A valid video device could not be found for playback. [-70017]

That's an error reported from DVD Player I believe...
kDVDErrorMissingGraphicsDevice = -70017, // A valid graphics device is not available.
There's some conjecture it has to do with HDCP, or Video Card problems, but the only 2 cures/fixes I found were Software related, one was cured by updating the OS, another by replacing the Video kexts.
I think this error also shows up if trying to use DVD player in Safe Mode, (too much research isn't good! ).
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware>Graphics/Displays and report like this...
NVIDIA GeForce 7800GT:
Chipset Model:          GeForce 7800GT
Type:          Display
Bus:          PCI
Slot:          SLOT-1
VRAM (Total):          256 MB
Vendor:          nVIDIA (0x10de)
Device ID:          0x0092
Revision ID:          0x00a1
ROM Revision:          2152.2
Displays:
VGA Display:
Resolution:          1920 x 1080 @ 60 Hz
Depth:          32-bit Color
Core Image:          Supported
Main Display:          Yes
Mirror:          Off
Online:          Yes
Quartz Extreme:          Supported
Display:
Status:          No display connected
Can't think of much to try at the moment, but perhaps reapplying the big 10.4.11 combo, Repair Permissions, & reboot would help, not sure.
The combo update for PowerPC-based Macs...
http://www.apple.com/support/downloads/macosx10411comboupdateppc.html

"No receiver agreement found" for BPM ???

Hi everybody
I think this could be an issue in the cache. I have a ccBPM and when I am sending the message who starts the BPM to the Integration Engine I got the following error:
<SAP:Stack>No receiver agreement found for sender -BS_SQL_Database to receiver -IP_ScanningStatus_01,http://xxxx.com/common/scanning.MI_JDBC_Response_Asyn_ABS</SAP:Stack>
IP_ScanningStatus_01 is an integration process and you do not need a receiver agreement ("not required" in receiver determination) to send a message to an integration process. Two weeks ago the process work and the very strange is, that in sxi_cache it shows the 31.07.2006 as last change/activation, but I did an activation yesterday. A full cache refresh did not change anything and the status of the cache is "up to date". We are on SP14 (:-<)
Regards Oliver

Hi Udo
yes, that is exacly my problem.
I deleted the corresponding processes in the repository and in the configuration. I recreated the process in the repository under the same name and after that I tried to import the porces in the configuration under the same name, but now I got the following error:
Unable to transport object Integration Process IP_ScanningStatus_01 | http://xxxx.com/common/scanning (CE_ONESAP_ACETATE_MFG_xx, 1.0 of celanese.com) of type RepBProcess from application REPOSITORY on system REPOSITORY. Detailed information: Attempt to serialize the generic part of object Integration Process IP_ScanningStatus_01 | http://xxx.com/common/scanning failed(serialization problem)
Any Ideas?
How can I delete the old process out of cache?
Regards Oliver

ERROR in PI : No sender agreement found for , , , , ,

Hello everybody,
i'm working with SAP PI 7.1
it's a new installation.
I created the first easy interface JDBC-Pi-File.
when i activate the CC i don't see any message in SXMB_MONI but in RWM i see the messages in Waiting status and when i look inside i see the follow error:
SOAPFAULT received from Integration Server. ErrorCode/Category: XIServer/INBOUND_BINDING_ERROR; Params: BS_CSIS_DEV, http://xxxx.com/test, SI_DB2SP_DOCUMENTS_AA_02; AdditionalText: null; ApplicationFaultMessage: null; ErrorStack: Error in sender agreement for party , service BS_CSIS_DEV, interface namespace http://xxx.com/test interface SI_DB2SP_DOCUMENTS_AA_02 No sender agreement found for , , , , ,
1-Configuration is ok. I create all steps and sender Agreement exist
2-end point http://yyyyy:50100/sap/xi/engine?type=entry is correct and the same in SLD and sxmb_adm -> Integration Engine Configuration
3-i suppose 50100 port is correct because when i try to use 8010 port i have a different error.
4- i alreadi used CPA cache refresh and SXI_CACHE.
Any suggestion?
thanks

after 20 minuts i retry.
Now the error message is changed:
Transmitting the message to endpoint http://yyyyyy:8010/sap/xi/engine?type=entry using connection JDBC_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error transmitting the message over HTTP. Reason: java.net.ConnectException: Connection refused.
Edited by: apederiva on Aug 25, 2010 11:35 AM

IDOC to FTP File - Error : SAP:Stack No receiver agreement found for send

Hello Friends,
I need to configure a senario Idoc to FTP File, Í did required settings in R3 and in PI... , did mapping and configuratino in PI... and when I send my idoc I got error msg in monitor
<SAP:Stack>No receiver agreement found for sender ,BMG_ASN_File_Component to receiver ,GTN_224,http://adis-bmg.de/asn,SI_BMG_ASN</SAP:Stack>
I search the fourm but did not got my answer, me just a bit confused...
In my senario I have having followings:
1. Bussiness System ( RFT : sender R3 system). ( I have define a party and make a connection under Idoc Partner )
2. Bussiness Component ( ZTEST_COMP as on Reciever side is File Server, so I define the reciver as bussiness component )
3. Communicatin Channel
 File with protocol FTP having communicatin component as my Bussiness Component ( reciver ). there I defied the required info for FTP
4. Reciever Determination
 Sender:
 - RFT
 - Idoc-Interface
 - urn:sap-com:document:sap:idoc:messages
 Reciever
 communication party = space
 communicatin component = ZTEST_COMP
 Configure Reciever:
 There I again define the communication component as ( ZTEST_COMP)
5. Interface Determination
 -RFT
 - Idoc-Interface
 - urn:sap-com:document:sap:idoc:messages
 Reviever:
 ZTEST_COMP
and define the mapping which I did in design ( although I have seen some threads where mentioned we dont need maaping in this case ) ?
6. Reciver agrement
sender:
- RFT
Reviver:
- ZTEST_COMP
- SI interface ( SI_BMG_ASN )
- http://test-etc.de/asn
and included my CC for file .....
Now when I send Idoc I got error msg that Reciver is not found : am I dong something wrong ? do I have to defien a bussiness system instead of Bussiness Component ?
Pls suggest...

( I have define a party and make a connection under Idoc Partner
Do you really need a party in your communication? Should it not be a partly-less communication.
In the receiver agreement ensure that you have included the inbound message interface.
communication party = space
No need to give any space.
In the Interface Determination i hope that you have included the receiver meessage interface and then the corresponding Interface Mapping.
If still not works then make some dummy changes and again activate....correspondingly check the cache status of the ID-objects
Regards,
Abhishek.

Error in load master data from flat file to infocube "No SID found for val"

Hi gurus
while i m loding data from ffile to infocube. getting error message "No SID found for value 'HOT ' of characteristic 0UNIT" for material name field .
in flat file one fileld having lower carrecter so i have defined formula for upper case in transfer rule.
after scheduleing message is "data was requested". but in monitor-> detail-> request, extraction status is green and transfer , processing ststus are red.
overall status is red.

It appears your transfer structure and source file are not mapped correctly. Make sure your source file is in the correct format. TRy the "preview" function to make sure.
Also, is the file and your log on language the same? For instance is the file from a GErman user but you are logged in in English? You will see errors like that when you use ST (Stuck = Pieces) instead of PC (Peices in English)
To test a bad mapping, hard code the Unit to something to make sure...(to PC for instance).
Also, the error message you are getting is because of transfer structure, please re-activate it. IF it persists, try to skip the PSA and go straight to the data target.
Message was edited by: Steve Wilson
Message was edited by: Steve Wilson

Network Connectivity Status Indicator for IPv6 works wrong in Windows 7 and Windows 8

Hi Folks,
I am working on testing Network Connectivity Status Indicator for IPv6 in Windows 7 and 8.
Waht is "Network Connectivity Status Indicator(NCSI)" you can refer to https://technet.microsoft.com/en-us/library/ee126135%28v=ws.10%29.aspx?f=255&MSPPError=-2147217396
I found that even if Network Connectivity Status Indicator detect IPv6 connection to http://ipv6.msftncsi.com/ncsi.txt failed.
Windows IE still use IPv6 to connect to website first, rather than stop using IPv6 and to use IPv4.
It will cause IPv6 fallback to IPv4 problem, that's 21 secs and 7 secs delay for fallback in Windows 7 and 8.
Does anyone suffer the same problem?
Or someone know how this works?
Thanks!

Hi Roger_Wang0214,
"Windows IE still use IPv6 to connect to website first, rather than stop using IPv6 and to use IPv4."
By default Windows prefers IPv6 over IPv4,we can manually configure the IPv4 prefer over IPv6 if it has result in any troubles.
Here is a link for reference :
Resolving Internet connectivity issues after World IPv6 Launch (June 6, 2012)
https://support.microsoft.com/en-us/kb/2533454
"The "Prefer IPv4 over IPv6" Fix it solution will configure your computer to prefer IPv4, instead of IPv6. By default, Windows prefers IPv6 over IPv4. If you are having problems using IPv6 to connect to some websites, this may resolve the
problem."
For a Windows 7 machine ,we can try the following fixit tool to configure IPv4 prefer over IPv6 .For a Windows 8.1 machine ,we can configure it referring to the manual part .
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip6\Parameters\DisabledComponents
If the DisabledComponents entry is unavailable, we can create it (DWORD (32-bit) Value).Then set a value with "0x20"to prefer IPv4 over IPv6 by changing entries in the prefix policy table.
Here is a link for reference :
How to disable IPv6 or its components in Windows
https://support.microsoft.com/en-us/kb/929852
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

"No administrator found for the task" in the front end

Hi all,
My issue is, whenever approval request is raised from the front end ( JAVA WEB-DYNPRO), it triggers the workflow through the "sap_wapi_start_workflow" and when the workflow proceeds to the first level of approval, the front end application provides the approver with Approve and Reject options.
On click of approve, from the java webdynpro, the approve status is written in the container using "sap_wapi_write_container" and then a call is made to "sap_wapi_workitem_complete". Upon excution, the message line is "No administrator found for the task" and the return code is "1".
But if we do the same steps from the backend (R/3), the workitem is getting completed without any such error.
Please advice.
Thanks.

Hi Balaji,
I think I have an answer for you. This has happened with us when approving a WD java task using UWL (in our case for travel). The key is the return code of 1.
What has happened is this. The return code actually comes from the function SWW_WI_STATUS_CHANGE_NEW which is called deep in the WAPI wrapper. It means "infeasible_state_transition = 1".
This is due to the fact that after updating the container, your wapi call from web dynpro tries to change the workitem from status of "Ready" to status "Completed". This will not work.
What you will have to do is call "SWW_WI_STATUS_CHANGE_NEW" to set the status to 'SELECTED' beofre setting the item to complete.
The reason for this is that when you are executing from R3, the status change is done for you. When calling from the WD, no reservation of the workitem occurs.
Sorry about last night, I live well outside of town and the phone reception at my place is poor.
Regards
Gareth

No administrator found for the task Message no. 5W141

Dear all,
i am doing asset mass changes i am not able to release my work list (AR31) it"s giving message like
No administrator found for the task Message no. 5W141
plz can any one help me following steps i followed
1.substitution for assets mass changes to substitute Dep Key
condition is asset class = 15000 and Dep area = 01
substitute with Dep key S200
for 15000 asset class actually dep key S475
2.i created work list for asset class 15000 and dep area 01
then attached my substitution
3. in AR31 here all assets status is Ready when i release work list it"s giving message same
i tried in DEV and QTY no solution
this is high priority in my project
plz Dear friends send reply
Regrds
Govind

HI Jayendra
I am having the same problem with releasing the worklist in AR31.
No administrator found for the task
please let me know the solution.
Thanks
Sharath

No Component found for the structure

Hi
I am getting the following error when extracted the delta upload into BI
No Component found for the structure for article 809875.
The extractor is 2LIS_02_SCL.
The following is the msg in the status bar.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
I have replicated and activated the datasource. But still i am getting this error. How to fix it.
Thanks
Annie

Hi Annie,
Activate ur datasource in source system and replicate and also activate in BI system.This is a time stamp problem.After activated try to run ur infopackage again.It should be fine now.
Regards
Chandu

No Administrator found for the task (solution in FAQ not applicable sadly)

Hi All,
I have had to build a custom work item inbox due to complex client requirements, one of which being that all tasks are declared as "General tasks", so that all users can select and work them.
Work item execution is performed using the function module SWL_WI_DISPATCH (I've also tested using SAP_WAPI_EXECUTE_WORKITEM), which sometimes returns the error 'No administrator found for the task'.
I followed the standard instructions for this error message, refreshing the org assignments, transaction SWU_OBUF etc, and this did not help the issue.
The error seems to occur within the function module RH_WI_AGENT_EXECUTE_CHECK, however according to our configuration I can see no reason why users shouldn't be allowed to execute the work item, if the org assignment has been stable for several months, all tasks are generic, and the work item status is READY. There is no rule for determining agent beyond them being "General task"s.
Does anyone have any ideas? According to the data in SWWWIHEAD I can't see any reason why execution should be failing for these work items.
Thanks

Hi there,
almoste there
The new extended eMail notification do allow a feature, which is named "Forward by eMail" (in the general settings of SWNCONFIG). And the result is, that a work item can be executed by another user-id, who is not the actual receiver of the work item.
If you looked at report RSWNWIEX you'll find out that exactly the proposed solution is in use there, having a very usuable example already in place: (check lines 155 and following)
 CALL FUNCTION 'SAP_WAPI_EXECUTE_WORKITEM'
 EXPORTING
 workitem_id = p_wi_id
 IF lv_rc <> 0 AND cl_swn_settings=>wi_forward_via_mail = 'X'.
*- require to put back if WI is selected
 CALL FUNCTION 'SAP_WAPI_ADM_WORKITEM_BACK'
 CALL FUNCTION 'SAP_WAPI_FORWARD_WORKITEM'
 EXPORTING
 workitem_id = p_wi_id
 user_id = sy-uname
 COMMIT WORK. "Needs to be done before executing again
 CALL METHOD cl_swf_run_wim_factory=>initialize( ).
 CALL FUNCTION 'SAP_WAPI_EXECUTE_WORKITEM'
That doesn't blast a security hole, as far as I see.
Using the table SWWUSERWI directly is not advisable at that time, I'd say.
Best wishes,
Florin

Faulty status found for DataStore ZSD_O01

Similar Messages

Maybe you are looking for