Favorites on screen after unlock after a phone call

ever since the last update, every time someone calls when my phone is locked and i unlock my phone, the favorites page is on the screen. it really annoys me because rarely am i unlocking my phone to make another call. is there any way to get rid of that?

i am just unlocking my phone by clicking on it and then sliding the button over. i know i am not double clicking because this happens every time i unlock it after someone has called. i know i am not the only person who this happens to because i've asked all my friends. here is the sequence of my actions... i clear my phone out to the homepage. phone is locked. someone calls. i hang up the call. phone locks automatically. wait 5-10 minutes. unlock my phone. favorites screen.
the problem is that i never went to the favorites screen. i don't want the favorites screen open, i want the homepage to be on the screen.

Similar Messages

Screen saver is set to "never". -- This fails after a phone call and phone locks.

We have set the screen saver to never. After a phone call the screen blanks and requires a on.off button push and unlocking. I am writing an ap for a mildly disabled person. They cannot operate the on.off button on the zte open. They also have problems with unlock mechanism for the screen. They can successfully click on icons and anything bigger than the standard 60X60 icons used by the os. I want them to simply be able to make a phone call with a preset number. Currently the application I have pushed to the device does the following. It displays a screen with three commonly called emergency numbers with large icons. The user chooses one of these icons and the dialer is brought up with number already dialed in. The user then simply touches the green dial button and the number is dialed. This works exactly once. After the first time the disabled user can not restart the application since the screen blanks and requires an on.off push and unlock to get back to previous state.
Current problems.
1. The screen blanks after a call and requires too many unachievable steps to recover the full app. Recovering the app requires normally a push on the on.off and the unlock procedure, then a reclick to start the application. This is unachievable by disabled user. Incoming calls always work. Both incomming and utgoing calls remove ability of disabled user to make an outgoing call without intervention from care-taker. If screen did not blank during a call, the application would work .
2. Miscellaneous problems.
a. typing keyboard is difficult for abled users and impossible for disabled user.
b. application could be better if the dial step was removed. Wee understand the security problem.
c. We would like option for oversized icons, oversized text which we would balance with fewer applications on a single page.
Any solutions would be helpful. I/we are knowledgable programmers but we would prefer to write the application as a simple ap and not have to change the operating system in any way. If the above is only achievable with a change and reflashing OS we would consider that approach but currently we have not dived into that code and would prefer to avoid that approach. Is there a simple solution to force the phone to not turn off the display during or after a call?
Regards
Otto

The suggestions have nothing to do with our problem. It is great that mozilla is working to provide access to the blind. The disability that we are dealing with is palsy and highly inaccurate and weak fingers. The application we have built allows for the dailer to be preloaded with important numbers the user may wish to call. The application has large buttons. The call button on the dialer is large enough. The problem is returning to the previous state and screen with the large buttons. If the phone screen blanks the user can not make a second call. If the application quits the user is barely able to restart the application. If the screen locks up after a call the user can not unlock the screen. The problem is in the interaction of the application with the dialer and the default behavior of the dialer that over-rides the user preferences and turns off the screen.

Since upgrading my phone to 6.0.1, I'm using way too much data. I believe it's the podcast app that's not loading shows while I'm connected to wifi. I have the 3g turned off for podcasts??? also after a phone call or an alert it starts playing a podcast?

since upgrading my phone to 6.0.1, I'm using way too much data. I believe it's the podcast app that's not loading shows while I'm connected to wifi. I have the 3g turned off for podcasts??? also after a phone call or an alert it starts playing a podcast?

I've also had the same issues, after upgrading to IOS 6.0, the apps in my iPhone 4 were crashing and the battery life run out very fast.
The only solution worked for me was to remove all mail accounts (Exchange/Gmail) from my iPhone (in settings) and then add them back.
The crashing were stopped! also the battery was back to normal.
I found the solution by first looking at the crash logs (in IOS 6). you can find them at Settings -> General -> About (at the bottom of the About menu you will find the option that opens the logs).
There i saw many logs about Low Memory crash. 99% of the logs were pointed that the largest process (use the most memory) during the crashes is "dataaccessd".
I search in the web and found that this process is a deamon process that reponsible the Mail accounts (like Exchange/Gmail) and contancts list.
I've installed the app "System Status - activity monitor" which shows important system info like CPU usage, Memory usage and running processes.
Before apply my solution (deleting the mail accounts) i saw that the CPU usage was very high which consume the battery very fast. Also i saw that the memory (RAM) was run out.. which probably what cause the crashing..
After deleting the mail accounts (at Settings -> Mail, Contacts, Calendars) i check again with the System Status app, and saw that the memory and CPU were back to normal.
Adding the mail accounts back, still everything work ok
Hope this solution will help you too,
Enjoy!

3G Network unusable after a phone call

My 3G network tend to disappear after a phone call and I have to switch on and off my 3G to make it work again. I am using bb 9360. Anybody experience this?

Hello Jayme and welcome to the BlackBerry® Support Community Forums.
Sorry to hear you are having issues with your BlackBerry®.
Network coverage issues are best investigated by your mobile network carrier. I would recommended you contact them for further assistance into this.
Hope this answers your question.
-HMthePirate
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Siri's voice just says everything that i touch. The voice says the numbers i touch but the numbers dont show up on the screen so i cant make phone calls! what is going on??

Siri's voice just says everything that i touch. The voice says the numbers i touch but the numbers dont show up on the screen so i cant make phone calls! what is going on??

It sounds as if you have Voiceover activated. You should be able to turn it off by triple tapping the Home button.

Screen unpredictably shutting down during phone calls.

Anyone understand the logic behind when the screen shuts off during a phone call.
I'm using the keypad a fair bit and sometimes the screen will shut down during a call, hiding the keypad. I can shake it and it will come on again but then sometimes it goes away.
Sometimes it just stays up the entire call.
Sometimes it shuts off during the call.
If it shuts off during a call I can shake it to get the screen to come on.
Sometimes it just stays up for the rest of the call.
Sometimes its shuts off again.
If it shutss off during a call I can shake it to get the screen to come on.
Repeat...
Quite frustrating. How do I get it to stay up?
Can I?

My iPhone does the same thing. When I make or receive a call the screen seems to do the opposite of what it should do. When I put the phone to my ear the screen activates, when I pull it away the screen locks. This causes me to press the touch screen when talking on the phone, buttons like mute and keypad.. highly frustrating. Also when I try to hang up, the screen locks preventing me to end the call.. have left numerous unintented voicemails due to this.
I have tried adjusting the auto-lock setting but this does not help and is up-to-date. Any ideas?

I am facing a new problem after a missed call. i phone will get freez on its lock screen after a miss call. Its seems that its main screen touch is not working properly. This problem occurs after each and every missed call.

I'm using iphone 5s with ios 7.1.2 & I am facing a new problem after every missed call. i phone gets freezed on its lock screen. It seems that its main screen touch is not working properly. It should be bug introduced by apple . This problem occurs after each and every missed call .There is no patch announcement for this issue yet. There are few workaround to fix this issue: Reboot your iphone. But its irritating to reboot the phone frequently after each issue....

Hello dipthebe,
Check out the articles below go through troubleshooting steps for your iPhone when the screen is unresponsive. You may want to try and restore your iPhone as a new device and then test out what happens when you miss a call to see if the issue is still present afterwards.
iPhone, iPad, iPod touch: Troubleshooting touchscreen response
http://support.apple.com/kb/ts1827
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Regards,
-Norm G.

Blank screen after Ending a call on Asha 501

I got a new Asha 501 last week. I am very happy with the product and its worth for the money spent.
However, two issues i have noticed so far and its bothering me a bit
1. after ending a call the screen goes blank and sometimes it takes a bit to end the call. This is very awkward during some important calls. would appreciate if there is any solution for this.
2. Mail app takes a long time to load the message contents. I know 2g is not the fastest connection but still this is too slow even for 2g.
best,
Selvan

1. On call, when you bring your phone near to your ear, the Proximity sensor recognises your ear and turn off the screen so that there is no unwanted inputs as the screen touches your skin. But when you pull it back, it turns the screen on again, but it takes 0.5-1 second to the Max.
If it takes longer, make sure there is nothing in front of sensor (it is placed on top left), like Plastic lamination, some accessory, dust or while you pull off your phone, your finger should not be there.
If it still takes longer, better make your device checked at Nokia Care. If found some problem, they will change the sensor.
2. The mail app is working perfectly fine for me on Wi-Fi. You should try loading some websites in browser, if it takes longer, check network strength, it should be strong on 2G internet (Personal experience- BSNL 2G, residing near Network tower, slow like hell, in INDIA). Try changing provider.
Source- Personal experience (owning a Nokia 501)

Notifications Profile changes after a phone call

I have created a custom profile and set my notifications to this profile but After either an incoming or outgoing phone call the profile switches back to 'Normal'... why is this happening?
peace and love

How are you ending the call? You can end a call two ways, one is to hit the End Call button on the screen when you take the phone away from your ear, the other is pressing the top of the phone.

Solution to Unresponsive/Blank Screen After/During a Call

Hi all,
I upgraded to iOS4 on my 16GB 3GS and for the past few days my screen has been switching off in calls and then not coming back on again when taken away from the face. This also left the screen blank, after clicking the power button 5 times it woke up, however the touchscreen was unresponsive. I would have to restart it to get it working.
I tried to search for a solution for this and there was advice about restoring and resetting the settings. I carried them all out but with no luck.
After a little bit of lateral thinking I had an idea.
So I took the screen assembly off and then the proximity sensor assembly. I then cleaned the glass where the proximity sensor "sees" through the screen. After this it has started working and hasn't failed once. I believe that it is because the iOS 4.01 update changed the sensitivity of the proximity sensor due to the problems with the iPhone 4's proximity sensor. And hence a slight bit of dust would alter the more sensitive proximity sensor's readings.
Hope this helps somebody, do let me know if my logic above is completely off.

1. On call, when you bring your phone near to your ear, the Proximity sensor recognises your ear and turn off the screen so that there is no unwanted inputs as the screen touches your skin. But when you pull it back, it turns the screen on again, but it takes 0.5-1 second to the Max.
If it takes longer, make sure there is nothing in front of sensor (it is placed on top left), like Plastic lamination, some accessory, dust or while you pull off your phone, your finger should not be there.
If it still takes longer, better make your device checked at Nokia Care. If found some problem, they will change the sensor.
2. The mail app is working perfectly fine for me on Wi-Fi. You should try loading some websites in browser, if it takes longer, check network strength, it should be strong on 2G internet (Personal experience- BSNL 2G, residing near Network tower, slow like hell, in INDIA). Try changing provider.
Source- Personal experience (owning a Nokia 501)

Wont wake up after a phone call.

Per settings, my phone will auto lock every 5 minutes and will require a pass code after 15 minutes to log on back. When the phone is locked and if a receive a phone call and after I disconnect the call, the phone does not wakes up for sometime. "Slide to unlock" will look like frozen. But after a minute or two, it comes back normal.
I tried restoring to factory defaults as well...but no luck. Any clue? Does anyone else have this problem?

Could this be the same case as your?:
http://discussions.apple.com/thread.jspa?messageID=11797939&#11797939

Responsible Agent after transferring phone call CTI

CRM 5.0 SP11
Using CTI, when a phone call is transferred between 2 agents we would like the responsible agent to automatically become the person that took over the interaction without them manually having to change the responsible agent partner function or forward the interaction in the Inbox.
Have been looking at the following classes but not seeing where the code it getting touched in the actual transfer between agents.
CL_CRM_AUI_ONEORDER
CL_CRM_CUCOPROCESS_IMPL
Anyone with similiar requirments.

t-code CRMC_IC_RTFRAMEWORK put a check in Disp.Mode field.

ITunes doesn't return to full volume after a phone call

At work I use iTunes on a 32-bit Windows 7 machine. We use Microsoft Lync for phone calls.
My settings are set so that Windows reduces the volume of applications by 80% when I have a phone call. This works just fine. If I leave the music playing during the call, then when I finish the call, it will return to the normal volume.
However, if I pause iTunes during the call, then the volume does not return to normal, and I have to use the volume mixer to fix it. Is there a solution to this?

Anyone have any thoughts on this?

Screen goes black when making phone calls

Hi, I have started to use a new Xperia Z2 a short while ago. As soon as I am tapping the screen to call a phone number the screen goes black; I can hear the phone calling but can't see anything (not being able to turn on loudspeaker etc.). The sound works, and screen can be brought back to life when the call is finished. Same thing when I call with my Skype app - really annoying as the video mode in Skype doesn't function. When the call is finished from the other side, I can get the screen to light up again. What can I do to solve ths problem?

Hi.
I've got very simillar problem with Xperia Z2 screen.
Not always, but very often when I want to end the conversation and take the phone away from my head, screen remains black.
Only power button can help, when I click it, screen pops up and then I can click "END CONVERSATION"
It's really annoying. What can I do, to make it work ?
Answers for your further questions.
- I don't have any protection on the screen
- I don't have any case or anything
Android 4.4.2
Compilation number: 17.1.1.A.0.402
Thanks

Can't get passed "Connect to iTunes" Screen after removing phone from bag of rice.

My phone recently had water damage, so I put it in rice for 2 days and then plugged it in. It showed the black screen with the apple symbol and then shut down and did this about 12 times. I put it back in the rice, and after taking it out after a few hours, it boot up normally to my "unlock" screen but then went to a screen saying to hook it up to iTunes. I then restored the phone to where it said it was complete but then it asked me to restore it again. I did that, and now it says it is unable to restore because of error. What should I do?

Ohh and it's only about a month old and it's a iPhone 4.

Favorites on screen after unlock after a phone call

Similar Messages

Maybe you are looking for