Favorites within Bluetooth - what does it mean?

Hi,
I am trying to figure out what something does on my iPhone. This may be with either the 3G or 3GS because I think it has more to do with the OS.
If you go in to General/Bluetooth/Handsfree Link (what my Acura MDX uses to connect as a phone) What does Phone Favorites (on/off) and Phone Recents (on/off) mean? I don't think this displays my recent calls or my favorite numbers on the display for my car.
I brought my car into the dealership today and I was having some trouble dialing the number with my phone and then using the bluetooth connection to work. She flipped the switch with Phone Favorites on/off and then I was able to use the "HandsFreeLink" to make an outgoing call.
I don't think this is what fixed my problem, but I really don't know what those two features are for. Does any one else?
Thanks!
Natalie

Troubleshooting is a form of problem solving, often applied to repair failed products or processes.
read more here: http://en.wikipedia.org/wiki/Troubleshooting

Similar Messages

  • TS1424 When I click to play my songs in the library they will not play and show a circle with an exclamation point in the middle of it, what does that mean and how can I get them to play?

    When I click to pay my songs in the library they will not play and it shows a circle with an exclamation point within it. What does that mean, how do I fix it, and how will it play my songs again? They used to play before on my Iphone4 with no problem, but since I upgraded to the Iphone4s there is an issue.

    I am having the same problem. I have just tried this. Unplug iphone > open itunes > delete all music from itunes library > close itunes > re-open itunes > add music from original folder > plug in iphone > select songs > press sync > unplug iphone using eject button onscreen > checked phone .... still nothing in music folder on phone. On itunes the "On this iphone" tab the songs remain there but greyed out.

  • Connection time out  what does this mean?

    connection time out  what does this mean?

    Perhaps you could try this to resolve your issue:
    Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
    Note: This will reset all network settings including: previously connected Wi-Fi networks and passwords, recently used Bluetooth accessories, VPN and APN settings.

  • Trash not supported? What does that mean...?

    Trash not supported? What does that mean...?

    When you trash something from within FCPX -- it is completely deleted (from Events or Projects); it is not sent to the system trash - there will be nothing to recover if you make a mistake. If you archived your sources outside of an Event, the originals *will not* be deleted. Do not delete an Event that contains original source media unless you are sure! You will lose it.

  • Latest IOS displays fault code 1671, what does this mean?

    latest IOS displays fault code 1671, what does this mean?

    If it has NEVER been jailbroke, here are some standard repair procedures:
    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • What does it mean by deleting the Content of the setup table when LO cockpi

    Hi all:
        what does it mean by deleting the Content of the setup table when LO cockpit ? why should we do it?  why set up tables ?
    Thank you very much!!!
    Edited by: jingying Sony on Jun 7, 2009 4:46 AM

    Hi Jingying Soni,
    Data sources in LO cockpit have a seperate exctraction source during full update mode and delta update mode.
    During delta update mode(when an transaction is posted in any particular application - like SD - sales orderm delivery) data is posted in application tables and updated alongside to the update table/extraction queue.
    From the extraction queue this data is further transfered to the delta queue using periodic background jobs.The data is then upladed in BW. The delta lad always reads data from this delta queue.
    However, when a full load is requested from the BW, the data is sourced by the set up table of the corresponding application.
    The setup table is loaded/initalized first. In this initialization process , it reads data frm the corresponding application tables and stores it within this table. Later BW reads from this set up table whenever full/initial load is requested.
    The process of filling set up able before full load request frrom BW is called set up run.
    Before you run a set up to fill the set up tables you need to check that the set up table is empty.
    If it is still containing data that was previously loaded in some other set up run. This data will als get loaded in BW unitinetionally/accidentally.
    So, you need to ensure that you only get the intended data in BW. This can be done by proper selections to transfer data from application tale to set up table and from setup table to BW.
    Along with this you hae to ensure that the set up table is either empty or you are using a disparate selection in the set up run and BW load which does not overlap with the previous set up runs data.
    Hope it helps,
    Best regards,
    Sunmit.

  • I moved my Mac and am trying to set things up again.  The computer detected the wireless mouse immediately, but does not find the keyboard.  What does "discoverable"  mean?  The keyboard is turned on.  Don't know what  else to do.

    I have just moved and am setting up my Mac again.  It immediately found the mouse but cannot seem to find the wireless keyboard.  What does it mean to be discoverable?  The keyboard is on with blinking green light, but the computer can't seem to find it.  What do I do?

      What does it mean to be discoverable?
    Open System Preferences > Bluetooth
    Make sure On and Discoverable are both selected.

  • What does this mean? drive reported error: sense key = medium error, etc,

    What does this error message mean and what can I do about it?
    While trying to burn a CD, about 15 seconds after the burn started, I got this error message:
    The drive reported an error:
    Sense Key = MEDIUM ERROR
    Sense Code = 0x73, 0x03
    What does this mean and what can I do about it? Any help greatly appreciated. TIA, Bill

    I have no idea what the error means. However, need a little more info from you.
    What type of CD are you using, audio or data? -R, -RW?
    Any problems previously?
    Try a different brand. Top forum favorites
    CDs
    FUJI
    TDK
    Verbatim
    DVDs
    Maxell
    Make sure the DVDs are not dirty, smudged and/or scratched.
    http://docs.info.apple.com/article.html?artnum=50448 How to Handle and Clean CD and DVD Discs
    Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs.

  • On my IPhone 5s, there is a symbol at the top of the screen and it looks like a circle with a lock inside. What does it mean and how do I remove it?

    On my IPhone 5s, there is a symbol at the top of the screen and it looks like a circle with a lock inside. What does it mean and how do I remove it?

    You mean the Control Center.  As was said ...slide up with your thumb from the home button and a gray box should open (i.e. Control Center).  There you can turn the orientation lock Off or On.  You can also use the Flashlight or turn Bluetooth on or off, and other functions.

  • What does this mean and why? How to fix?Mac OS X Version 10.8.56.6 (1510/1508). It can't be used on Mac OS X Version 10.8.5 (Build 12F37).

    6.6 (1510/1508). It can’t be used on Mac OS X Version 10.8.5 (Build 12F37). what does this mean and how to fix?

    kgpmcn wrote:
    Crows are birds.
    Crows are black.
    Therefore black birds are crows.
    The build I have is the released build of Mail. I reinstalled it as directed and it didn't help. That indicates that the problem is with my version of OS X.
    The build you have is the released build of 10.8.5.  You reinstalled it as directed and it didn't help. That indicates it is a problem with your version of Mail.
    The above are examples of flawed logic.
    Seriously now. Since you obviously don't know what a Combo Update is, I will tell you. A Combo Update is short for a COMBINATION of Updates. That means that there is MORE THAN ONE update in a Combo Update. It is, therefore, quite proper to speak of "one of the Combo Updates". For people whose first language is not English and are not familiar with its subtle nuances, perhaps I should have said "One of the updates contained within the Combo Update was"
    "There aren't "versions" of the combo update, unless Apple releases a revision"?
    This is plain silly. It means "There aren't versions unless there are"
    Also I didn't use the word "version". See above for the explanation of what I DID say.
    Are you one of those TROLLS I keep hearing about?
    I hope you got a lot of phoney Help points for not actually helping.
    Don't bother replying, I won't come back to this thread, so I wont see it. Of course you'll get another phoney Help point, so I suppose you will, but I'll never know. Doesn't that mess with your head?
    Bye Bye
    What an attitude you have.
    Erase your drive and reinstall correctly, stop messing about with incremental patches. The routine you need is BERR (backup, erase, reinstall, restore) or just stay as yu are, it is entirely up to you.
    kgpmcn wrote:
    Are you one of those TROLLS I keep hearing about?
    I hope you got a lot of phoney Help points for not actually helping.
    The depth of your ignorance shows here, there are no phoney points, only ones awarded by posters who receive solutions, and only at the original posters choice.

  • I am getting a message that states "startup disk is almost full.  What does that mean and how do I fix it?

    I am getting a message that states "startup disk is full".  What does this mean and how do I fix it?

    For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
              iPhoto ▹ Empty Trash
    Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as  Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
    See this support article for some simple ways to free up storage space.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
    Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
    The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
    I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with the app, quit it and also quit Terminal.

  • What does ATP mean in TPVS

    What does ATP mean in TPVS. and what is the use?

    The meaning of ATP is same as it is in R/3
    TP/VS : Transportation Planning/Vehicle Scheduling
    The orders (sales orders, purchase orders, returns, or stock transport orders) and deliveries that you have created in SAP R/3 and transferred to SAP APO using SAP APO Core Interface (CIF) form the basis for planning.  The result of TP/VS planning are planned shipments that you transfer to SAP R/3 after planning is complete. There you use the SAP R/3 component Logistics Execution (LE) for transportation execution.
    If you plan planned shipments for deliveries, you can change delivery deadlines in SAP R/3 from within TP/VS.

  • What does extracting mean when downloading an app on CC?

    i downloaded a free trial of Photoshop CC and its downloading an app but it says "extracting". what does that mean?

    Product files are packaged into a single file for downloading. Once that file is downloaded the files packages within the file needs to be extracted and installed onto you machine. Photoshop would not download a product. More likely you downloaded the Creative Cloud Application and it is now download an application like Photoshop.  The package for an application like Photoshop has been download and is now being extracted into files the will be installed.  The Application once installed can then be used.

  • What does this mean: "Are you sure you want to send a form again?"

    I have a MacBook 10.4.11 (tiger) with Safari 3.1.1, everytime i use Safari, i always get this message when I click to back button to back a page:
    "Are you sure you want to send a form again?
    To open this page again, Safari must resend the form you completed to open the page the first time. This may cause the website to repeat actions it took the first time you sent the form."
    What does that mean, and how can I fix it to make it stop popping up, because it's getting really annoying having to see that message frequently when I use the back button. This has been going on ever since I bought the computer (around december 2006), and I've been curious about what this means and wanting to fix it! please help..

    Zoomantics wrote:
    If anyone has a way of stopping Safari from doing this I'd appreciate the "how to".
    I am on a website that has phpbb installed and when I do a search for new posts it shows them to me.
    When I click on a post that I wish to read it shows me that post but if I hit back the server is set up to not allow multiple searches within a short time and the page returns "you cannot submit another search in such a short time".
    If I understand what you're describing, that's a function of the phpbb forum, not something Safari is doing or can change.
    A suggestion: Instead of just clicking on the posts you want to read, I would Command-click to open them in new tabs. Your page of search results will remain open in the first tab, so when you're finished reading the posts, you can close their tabs and return to your list of search results.

  • What does this mean:Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7

    What does this mean:Photoshop 13.1.2 for Creative Cloud Installation failed. Error Code: U44M1P7
    I found the manual update, which worked!
    http://www.adobe.com/support/downloads/thankyou.jsp?ftpID=5595&fileID= 5604

    Hi Barbara,
    For failed 13.1.2 update error U44M1P7, Please refer to the solution mentioned in the following threads :
    http://forums.adobe.com/message/5396792#5396792
    http://forums.adobe.com/message/5409050#5409050

Maybe you are looking for