FAX Analog line for the Router

Hi NetPro.
May i know that if i have 22 numbers of FAX Analog lines which i module should i add on into the router ? and how many ports which can fullfill the 22 lines of FAX Analog lines.
example : EVM-HD-8FXS/DID ... etc
Thanks
Regards,
Kitten

Are you connecting 22 analog faxes (FXS), or are you connected to 22 analog POTS lines (FXO)?
EVM can only do 16 max FXS or 8 max FXS + 6 max FXO.
which router do you have?
If FXS, consider getting 24 port VG224 http://www.cisco.com/en/US/prod/collateral/voicesw/ps6790/gatecont/ps2250/ps5516/product_data_sheet09186a00801d87f6.html

Similar Messages

When I open up an e-mail attachment a box pops up PRINT TO FILE below that line OUTPUT FILE NAME with an empty line for the file name vs. simply going to my default printer?

when I open up an e-mail attachment a box pops up PRINT TO FILE below that line OUTPUT FILE NAME with an empty line for the file name vs. simply going to my default printer?

Make sure that '''''Print to File''''' isn't selected in the native print dialog box ''(see screenshot below)'' middle-right, and make sure your Printer is selected at the top of that dialog box.
''I'm a little confused why an email attachment would need to go directly to the printer, but that's what you asked about.''

[SOLVED][GNOME] What is the line for the startup sound?

Hi!
I removed the startup sound from GNOME.
I don't even remember if it did work, but I press the remove button a bit too quickly and there is no confirmation box.
Could you launch gnome-session-properties and tell me the command line for the GNOME startup sound please?
Thanks!
Last edited by Creak (2014-01-17 18:40:13)

Spider.007 wrote:You're welcome! You should also mark this thread [SOLVED]
Done!

The old Apple TV had a port for Analog the new one does not. Where do I find a (TosLink), Optical to Analog Audio for the Optical Output on the Apple TV so I can run my Analog outside speakers?

Where do I find a TosLink, Optical to Analog Audio for the Optical Output on the Apple TV 2?

click here for information.

WHAT IS THE DEFAULT LOG IN AND PSWD FOR THE ROUTER?

WHAT IS THE DEFAULT LOG IN AND PSWD FOR THE ROUTER?

It's right here in the forum: http://customer.comcast.com/help-and-support/internet/wireless-gateway-username-and-password/

Satellite L350 - Access code for the router

Dear Sirs
I have a Toshiba Satellite L350 running Windows 7 Ultimate. For the first 5 months it remembered the wireless access code for the router. I then installed a BT Home Hub which I subsequently removed and from then on the Windows 7 machine will no longer remember the password.
I have spent hours on the phone with Microsoft to no avail. Can anyone help?

The problem is very simple but the solution is not.
As I said earlier the computer remebered the wirless access code for around 5 months.
I then installed a BT home hub (free from BT) and it worked fine and then I uninstalled it and reverted back to my D-Link router.
From this point on every time I turn on the computer I have to enter the wireless access code to connect to the internet and until I turn off the computer all works fine.
Microsoft have not been able to locate the problem and neither have BT hence this last attempt to try and find the solution.
Thanks for your reply and I look forward to some help.

How to extend the time line for the premiere on mac pro mavericks

how to extend the time line for the premiere on mac pro mavericks

Wrong place.
Try the Adobe Premiere forum.
http://forums.adobe.com/community/premiere
Good luck,
x

Dedicated analog POTS line for the user

Hi Experts
yesterday ....... i post the discussion about how i can reserve one analog telephone line for one of my user so whenever he make outgoing call his calls go through one particular analog line and never found busy tone .... in reply to my this query one guy tell me to use partitions and CSS ... my question is lets say if i create new partition name " test" and assign my user to this partition so he can only use it whenever he makes PSTN dialing so his call goes through this partition and reached my GW but my GW have five different analog line's how GW came to know that the first line is reserved for all of the calls coming from this user which is assigned to this partition.
i have CUCM 8.5 and GW is Cisco 2800 series ......... i dont want my user to dial any extra digit or PIN
Regards
Salman

Hi,
I assume that this is MGCP gateway
Please, try to do the following to achieve your requirment:
Create a partition named "TEST" and associate this partition with your all access CSS say XYZCSS
Create a Route Group (TEST-RG) and add one of the five analog line which you want to isolate for this user. (analog line i.e. AALN/Sx/SUx/y@abc)
Create a Route List (TEST-RL) and select the TEST-RG group.
Create a Route Pattern (Pattern .!) select Route Partition "TEST", choose the Gateway/Route List "TEST-RL" ans save
In gateway configuration for End-Point please select the Calling Search Space "XYZCSS" and the attendant DN will the user's DN
Assign the users DN in TEST Route Partition and configure the CSS as XYZCSS (this CSS will have all the other partition to rreach internal user and including the TEST partition)
Try by configuring as per the above suggestion, if you have any issue please quota me. This user will able to dial the digit directly without adding any prefix or extra digit.
I hope this will help you or will drive you to right direction.
Thanks
Selvarathnam

Multiple MM schedule lines for the same date

Hello All Gurus,
I am facing a problem where the MM schedule lines are divided into various quantites for the same date. For example on 02/11/2010 the total quantity is 120, it is appearing in the below form in ME38:
02/11/2010 - 40
02/11/2010 - 40
02/11/2010 - 40
Although this is not an error, but my client is not happy with this. Can someone tell me why I am getting this error? Is it because of the rounding value that we maintain in MRP 1 view of material master record? Or is there any other setting that I am missing?
Please let me know. I would be very much thankful to you.
Thanks and Regards,
Umakanth

Hi,
Before changing the setup, note that sometimes it is beneficial to split one demand into multiple delivery schedules. Especially if the demand is bigger than equipment type (container/truck etc.). If you want to manage inbound transportation for such delivery schedules, it is much simpler to do this when each delivery schedule is not bigger than one equipment.
Regards,
Dominik Modrzejewski

In V_V2 the role of Sort Item by date of creation and Sort by delivery date of earliest schedule line for the Sales Orders when Material is out of Stock.

Hi All,
Good Morning,
I am working on once Incident for Re-Scheduling Program V_V2 where the user has requested us to change the criteria for determining the priority of Sales Document based on Sort Item by date of creation. Currently they are using the Sort by delivery date of earliest schedule line in the Variant.
I would like to know the role these both options play in the Re-Scheduling program V_V2. I would like to know the impact of both of them and the kind of testing I need to perform to study the behaviour of Sales Orders especially when the material is out of stock?
Please explain with help of examples.
Thanks
Farhan.

This is not that simple that an example would explain how this transaction works but I'll give you some examples.
Material A has SO1 and SO2 of 10KG each, stock is 20KG so both quantities are confirmed at today. A stock recount determines a reduction to 5KG. This program would change confirmed quantity of SO1 to 5KG and SO2 to 0KG if:
Creation date of SO1 is older then SO2 in strategy 1
1st delivery date of SO1 is smaller then SO2 in strategy 2
Material B has SO1 and SO2 with 10KG each but no quantity confirmed, stock is 0KG. A prodution adds 15KG to stock. The program would change confirmed quantities of SO1 to 10KG and SO2 to 5KG if:
Creation date of SO1 is older then SO2 in strategy 1
1st delivery date of SO1 is smaller then SO2 in strategy 2
I'm assuming a specific configuration, there are many other scenarios possible.
regards,
Edgar

Finding the shortest path router for the router tracking purpose

Hi all,
A Question asking you regarding to routers' tracking information.
We keeps all the router infomation of our subnet in a file name "routers.txt" in this format:
1 2 1
2 4 1
4 3 1
1 3 5
This states there are four routers, the distance between routers 1 and 2 is 1, between 2 and 4 is 1, etc.
I need to write a Java program to keep track the shortest path between routers, I would understand that we can get this done easily in Java, but I am not a Java Savvy. I'm new in Java, would somebody help me to the right direction?
In order to keep track the routers in our subnet easily,the output would look something like:
Router 1
To Router Distance Vector
2 1 2
3 3 2
4 2 2
Thanks very much,
Cait.

Hi kksenji,
Well, because of the webform, it's not obvious to see. The output would be simple. From the input, for router 1 to router 2, the shortest distance is 1. For router 1 to router 3, the shortest distance is 3, for router 1 to router 4, the shortest distance is 2 and so on. The middle vector that it went through is 2 for every route. Hope this makes sense.
Just try to solve the problem with the shortest distance, and I have a hard time to figure out the algorithm for this as well as how to get this started.
Thanks, Cait.

Missing Subject line for the Approval Notification Mail

Hi,
We use CUP 5.3 SP7. We have configured the system for role based approval. We found that the approval notification mail being sent without any Subject line. It's configurable to set the admin mail id, but couldn't find one to set the Subject.
We get the following content in the mail....
View <http://<host:port>/AE/index.jsp?verifyApproverLogin.do........................>
Can we set it somewhere from the configuration?
Regards, Anil

Hi Alpesh,
Thx for your reply..But i think you missed my point...Let me try to explain it again...
When we submit a request, the system triggers a notification mail to the approver(s). And this mail seems to be missing a Subject line... and it's shown to be sent from the System E-mail id we set at the SMTP server config.
I couldn't find a tab for setting the E-mail format for the first approver neither at the stage nor in the e-mail reminder configuration.
Perhaps, setting the next approver will help if i had a secondary approver. But we are using a single stage WF in CUP. Am i missing some config step here?
Regards,
Anil

Fax/Email capability for the Message types

Hi all,
There a is a new message type ZSF created for Smartform for the PO transactions ME21N/22N/23N through NACE Tcode.
The properties of this message is similar to that of the NEU message type for SAPScript with the changes to the Form name and the Print program name.
But the ZSF does not perform the External send functionality which the message type NEU is able to.
For NEU Processing Routines is has the customised form ZZMEDRUCK while for the ZSF this coulmn of Form is Blank and the Smartform Column is updated with the smartform name. Is this correct?
What else is needed to enable the External send functionality for the ZSF.
Appreciate your inputs.
Thanks & Regards,
Stock.

Hi
It seems all the settings are OK But what MEDIUM is used to send Mail
For print we use Medium 1 for Fax 2 like that for MAIL it is 7 I think
see the table NAST and the field NACHA for different medium values
So you have to use the proper medium for sending the mail
also you ensure that the Driver program is triggering properly for the different communication medium
see the links for sending the smartform through mail
check...
How to send smart form via email
/people/pavan.bayyapu/blog/2005/08/30/sending-html-email-from-sap-crmerp
Regards
Anji

Transaction MM60 printing multiple lines for the same information

Transaction MM60 is printing the same information multiple times, meaning that the same materail is printing multiple times with the exact same information. Any ideas why?

It IS showing duplicate lines. The columns that I'm showing are:
Material
Plant
Val. Type
Material Description
Last Change
MTyp
Matl Group
Unit of measure
Purchasing group
ABC indicator
MRPType
Valuation Class
Price Control Indicator
Price
Currency
Price Unit
Created by
Every single field is identical and each material contains exactly eight rows of identical information. The interesting thing is that if I actually enter a material number, only one line shows (which is correct.) However, if I leave the material number blank and enter the material type, that's when we get multiple lines.
Any other ideas?

Im getting a grey box at the bottom of my screen under the display line for the add ons like ghostry,personnas and greasemonkey icons are . i cant seem to get a "full screen" anymore . can you tell me how to overcome this

the box is located under the icon line at the bottom of the screen and above the window tool bar/icon box ! its almost like im running in a wide screen mode ! i cant seem to find a way of making the screen deeper, so it fills all the available space ! its also . freezing and it messes with the add ons and the adobe plugins ! a real shame cause i think the new layout is great . kep up the good work

Do you have that problem when running in the Firefox SafeMode? <br />
[http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
''Don't select anything right now, just use "Continue in SafeMode."''
If not, see this: <br />
[http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

FAX Analog line for the Router

Similar Messages

Maybe you are looking for