Fax from computer to photosmart 7525 gets cancelled after spooling

I can fax directly from printer, but when I use the HP software or print function on the computer to set up fax and send, the progress goes from spooling to cancelled without any error notices. I have a Dell XPS 8500 running 8.1 and Photosmart 7525 connected by USB and wirelessly. They communicate just fine with the scan and print functions. Both are current on updates using the check for updates utility. I have a dedicated Voip phone line from Comcast and ther most current modem that I have slowed through the fax settings. I've spent hours reading forums on HP and Microsoft searching for exactly this issue. Please help

Hi @xskilledtrades
The truth is, I don't know what is causing the fax from computer function to fail. I understand from your description that the fax is cancelling after spooling, but that you can print and scan just fine as well as fax directly from the printer. I suspect the issue has something to do with the driver, thus I suggest we remove the driver and reload it.
Please use the following steps to delete the printer/fax from device and printers, and the driver from the server properties.
1. In the ‘Devices and Printers’ folder
2. Choose ‘Print server properties’.
Win XP – With no printer selected, click ‘File’ then ‘Server Properties’.
Windows Vista – With no printer selected, press ‘Alt’ then click ‘File’ then ‘Server Properties’.
Windows 7/8 and 8.1 – Select any printer in the ‘Devices and Printers’ folder and click ‘Print Server properties’ above.
3. Click on the ‘Drivers’ tab at the top of ‘Print server properties’ window
4. Choose the printer you want to uninstall and click ‘Remove’
5. Choose 'Remove driver only'
6. The next screen will give a warning, letting you know that deleting the driver package will remove it from the system. Click ‘Yes’ to say that you are sure you want to do this.
If documents are stuck in the print spooler, you may see an error, cancel any documents pending in the print queue, or try restarting the print spooler, then try to remove the driver from ‘Print server properties’ again. If it still won’t remove the package, restarting the computer and the printer should resolve this ‘in use’ error and allow the driver to be removed.
If the you continue to get an 'in use' message follow the steps in the document here; The Specified Printer Driver is Currently in Use
After the driver is removed, open Start > All Programs > HP folder > Printer folder > HP Setup and Software (or the printer icon).
The Setup and software screen will open and you can click on Connect a new printer.
Thanks, I look forward to hearing back from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

HP Officejet Pro 8600 fax from computer will not fax more than one page without canceling job

HP Officejet Pro 8600 MFP running on Windows 7 64 bit. I purchased this printer almost a month ago. The install was simple and straight forward with no apparent problems but when trying to fax from computer the program seems to be only able to fax one page faxes. Any multiple page faxes will show a message "spooling" for 10 to 15 seconds then it will cancel the entire fax. I have tried this in both wired and wireless modes with the same results. I have sent 30 page plus faxes from the printer without any problems, it is only the fax from computer that seems to have memory issues. Any solutions out there?

Have you tried updating the firmware on the printer?
If not, here is a link to the most recent firmware:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-101905-4&cc=us&dlc=en&lc=en...
Try that and let me know if it helps to resolve your issue.
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HP Officejet Pro 8500 A910 Premium will not fax from computer with Windows 8

My printer worked great on Win XP and I could fax directly from the printer or from the computer. I installed Windows 8 32 bit (I'm running an older system that works fine for everything I use it for -thank you very much), and downloaded the latest greatest HP driver & software for Win 8 32 bit. Everything works perfectly, except faxing from the computer.
If I run the fax test from the printer, the fax test PASSES. If I run the fax test from the computer, the fax test PASSES.
If I put documents in the printer feeder and use the printer fax functions, it faxes beautifully.
It is only when I fax from the computer, the screen pops up with a status of spooling, then the status turns to Cancelled every time.
It always worked on Win XP.
The FAX printer and FAX driver for the FAX printer showed up in Control Panel automatically when I installed the updated drivers/software from HP. All the properties on the FAX printer look good.
I tried a usb connection, and a network ethernet connection, with the same results.
Printing and scanning all work fine. I really like this printer, and I would like it even more if I could figure out how to get it to fax a document from the computer.
When I say fax from the computer, I mean opening a document, saying Print, selecting Fax - HP Officejet Pro 8500 A910, filling in the fax information page, selecting my cover page options, and pressing the send fax. All just like I used to do before I upgraded to Win 8. When I hit send fax, that is when I get the popup that the fax is spooling, then it goes to cancelled. No error codes are displayed, no clues as to why, no nothing. If I print the document and put it in the printer document feeder, I can fax it using the printer display screen no problem.
Very bizarre.
This question was solved.
View Solution.

Alright, I spoke with some of the engineers and they suggested the next few steps. First, here is a thread on an MS forum about removing a driver in an alternate fashion.
http://technet.microsoft.com/en-us/library/cc730875.aspx
Another thing to note is that in Win8 you can easily access the Command Prompt by hitting the windows key and typing “command prompt.”
Additionally, I will PM you some further steps on removing the vestiges of the software from the back-end of your PC. You will HAVE to be sure to follow those instructions to the letter.
Do these two things and let me know what happens after you install the printer again from the direct download link I have already provided above.
Let me know and have a great day!

Unable to send fax from computer

Hi,
I'm unable to send faxes from my computer (e.g, from Word). I get a message: "The device is disconnected or powered off", which is not true.
The printer is an HP LaserJet 1536dnf MFP.
The OS is Windows 7 Ultimate, 64-bit, with 8 GB RAM.
I have updated to the latest firmware from the HP site, and have downloaded the latest appropriate driver package for this printer from there as well (hp_M1530_MFP_full_Solution_usb_n_w.exe)
The installation goes normally, and there are no error messages.
The printer is working fine. I am able to print and scan from the computer without problems. I am also able to fax directly from the printer without problems. The only problem is not being able to send a fax directly from the computer.
For instance, in Word (the latest version), when I print to the HP fax printer (which has indeed been installed correctly on the computer), I get a message that the doc has been send to the printer. But no screen pops up letting me type a phone number, and after about 1 minute I get this error:
Have been on the phone for several hours to HP support, and although they did a complete uninstall, and reinstall, the problem persists.
I also downloaded and ran this file from HP: HPLJ_M1530_Fax_IE_11_utility.exe, which is meant to resolve a very similar issue for people who have this Microsoft KB installed (KB2898785), which somehow interferes with the fax exactly as I have described. I do indeed have that Windows update installed. However, running the file did not solve the problem, and there seems to be no way of uninstalling that KB.
So I am at a loss, and would appreciate any help, if anybody can think of anything.
Many thanks
Tim

Hi @Tim613 ,
I see by your post that you are unable to send a fax from the computer. I would like to help.
Since you are able to print and scan from the computer, you don't have a communication issue. The printer will also send a fax, so it isn't a hardware issue. It sounds more like something possibly on the computer is blocking the fax communication.
The Toolbox doesn't support Windows 7 64 bit, but you should still be able to fax through Third Party Software. (Word) Which you have already tried and it didn't work.
I would disable all the start up programs and temporarily turn off the Antivirus Software to see if there is a program interfering in the back ground. How to use MSCONFIG . Click on the start up tab and click disable all.
Try sending a fax again.
Then you will have to go back and enable the startup programs and turn the Antivirus Software back on again.
Let me know the outcome.
Have a wonderful day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Faxing from pc hp7520 photosmart software

I have an HP Photosmart 7520 all in one. It will not fax from the pc software. It will fax fine if i do it manually on the touch screen of the printer. What am I doing wrong? It seems simple enough when I am using the software to fill in the blanks and hit "fax". Thanks
Nancy

Hello piggy1943,
Welcome to the HP Forums.
I see that you are having some faxing issues when attempting to fax from your computer.
Please start off by going through the following document that deals with Setting up the HP All-in-One to Send and Receive Faxes. I just want to make sure that we have all the settings in place and that the printer is set up properly as well.
Write me back and let me know if you had any issues or not. Feel free to ask any other questions of any concerns you may have.
Thanks for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Unwanted printing from internet Hp Photosmart 7525

Twice a day my Photosmart 7525 prints 'crap' on its' own that is useless to me. It is wasting my ink. How do I stop this un-asked-for printing?
This question was solved.
View Solution.

Hi,
That is more likely a Schedule Delivery Prinable you wrogly signed up from teh Apps menu.
A printable should have its name listed on the bottom of the printed page.
Expend the Managing Scheduled Delivery Printables > Managing Scheduled Delivery Printables section below and follow the steps for your region to disable its printing and remove the printable:
http://support.hp.com/us-en/product/HP-Photosmart-7520-e-All-in-One-Printer-series/5199461/model/528...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I accidentally removed hp photo and imaging from computer, how do i get it back?

Printer not printing in color. I accidentally removed HP photo and imaging from the computer, how do I get it back?

Please read this post then provide some details. What printer model? What operating system? Generally you could reinstall the full featured driver which would reinstall the Photo and Printing program.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Can't fax from computer

My new Officejet 5740, purchased 11/15/14, worked fine until February 2015 – no problems with any of its functions, including faxes.
That was about the time I switched from a wireless connection to a USB connection, and since then outgoing faxes cannot be sent from the computer, although they can be sent from the printer using the LED screen. There is no problem with incoming faxes.
Sending from the printer with the LED screen is an error-prone nuisance compared to the convenience of using the computer. Protracted discussions with HP Tech Support have been no help. The Techs seem to think I should just give up and use the LED screen on the printer.
After trying unsuccessfully to send an outgoing fax using the computer, the Fax Status window pops up indicating "Spooling…" as the status of the fax, and it never goes any further.
Is it possible that my changeover in type of connection from wireless to USB has caused the problem? Do I perhaps need a different driver? If so, where do I go to download one, and what do I ask for? Thank you.
This question was solved.
View Solution.

Thanks very much for the detailed instructions for fixing my outgoing fax problem. Because the instructions involved a number of steps, I hesitated to launch into them until I had the necessary time to go through them carefully. I was about to do so tonight, but before starting I tried once more to send a fax from my computer.
And what do you know, it worked perfectly, just as it had before this problem appeared a couple weeks ago! Somehow it fixed itself during the last 7 days -- possibly as a result of one of the periodic software updates that occur automatically(?) Whatever... I'm just glad it's fixed. I'll keep your instructions for future use if needed. Thanks again.

OSX Yosemite cannot send fax from computer

OS X Yosemite. Photosmart 7250
fax from printer - returns "Communication Failure", no code, message in Fax Queue.
I am not prompted to enter a phone#. Fax goes to fax queue and hangs.
Manual Fax from device works fine, phoneline communication is good.
HP Utility can communicate with FAX device.
HP Utility can test Fax device, successful.
Can test FAX device from web page, successful.
checked firmware - up to date
downloaded and installed latest HP software, drivers released 10/22/2014
wiped HP printers and did a clean install.
Did a hard power reset.
In other words, have done everything HP says at least once or twice.
Oh, this worked BEFORE Yosemite.
HP software is listed as for Yosemite OSX 10.10 on website.

It was ADOBE Acrobat.
Adobe puts their own print dialog between user and OS.
I bypassed this and used the system dialog. It prompted for phone number and I sent and received a fax using HP's fax test number, 1-888-473-2963
NOTE to HP :
Your online help desk could have saved me 2 hours of frustration if they asked these questions:
Is your application using its own print dialog?
Have you tried faxing from the OS print/fax dialog?
This question should be asked BEFORE all other diagnostic tests!
Now I gotta go talk to Adobe!

Can't receive or fax from computer anymore since I switched from

Verizon to Time Warner. Verizon was analog and in order to receive and send faxes I installed a 3 Com device between the phone jack and computer that would recognize a fax after two rings and automatically begin the fax reception.
Time Warner is digital and will not work with the 3 Com device, so we have to plug the phone line directly into the computer and because it is not stand alone will not receive or send faxes.
Saved $50 by transferring to TW but now can't fax--TW says they are working on it and 3 Com says they do not work with digital and nothing that does.
Any one have a solution?

...because what is not stand-alone, what won't send or receive faxes? Your computer's built-in fax/data modem?
Be careful about plugging your computer's built-in analog fax/data modem into a digital phone line. I don't know any of the technical particulars, but a google search using the following two phrases, "fax/data modem" and "digital phone line" would suggest that attaching an analog phone fax/data modem to a digital phone line may destroy the modem. That could be why you can't send or receive on it.
Even if Apple's built-in analog fax/data modem is resilient enough to not be damaged by the different technical physical characteristics of the line and its signaling, it would stand to reason that the on/off hook switch, dial tone, and incoming ring signal indications are probably an entirely different signaling format for the digital phone line than for the analog line, so the analog modem likely wouldn't recognize the digital signals and indications.
If you have attached your analog modem to a digital line, you might want to cart your computer to a friend's house that has an analog phone line, to see whether your computer's built-in modem is toast or not.

Deleted app store from computer. how do i get it back.

For some idiodic reason, I decided to delete the App Store from my mac. However, it didn't fully delete and is now corrupted. I cannot download Lion unless I have the App Store back. I tried to download the update combo, but I am running 10.6.8 and not 10.6.7 which is needed to download it. Any other suggestions? I could really use the help. Thank you!

I join and celebrate this post. I want to buy Lion OS and i can't since i don't have AppStore runnig either due to the same reason... and I have 10.6.8 also.... HELP US please, Apple Support guys

Inspection lot not getting cancelled after the inbound delivery is created

Hello,
The scenraio is like this.
1. Material was procured in plant A.
2. Using the stock transfer purchase order, transferred the material from Plant A to Plant B.
3. Outbound delivery was created, Handling units were assigned and Post Goods issue was done.
4. As soon as this was done, inbound delivery got created automatically in plant B and Handling units were assigned.
5. Inspection lot was created with origin "08".
6. Now I want to reverse all the transactions, so I did as mentioned below.
7. Handling units were deassigned from the inbound delivery and inbound delivery was successfully deleted.
8. Now tried to do the reverse post goods issue and got the error "Handling unit XXXXXX cannot be reversed"..Goods movement cannot be reversed for handling unit XXXXX because it has been changed or assigned to object since the last goods movement posting".
The issue is that as soon as the inbound delivery is deleted, the inspection lot status should change, which has not changed. So kindly let me know how to make the system cancel the inspection lot as soon as the deassignment of handling units is done in inbound delivery or the inbound delievry is deleted.
Regards,
Narendra Bora

Hello,
Can anyone please reply.
Regards,
Narendra Bora

Can't get rid of photo album from computer

My phone has a photo stream album from computer that I cannot get rid of. I have removed the folder containing the photos from my computer. Removed all backups in itunes. The box in the itunes sync for photos has never been checked. I have syncd several times and cannot get rid of the album from the iphone. Any suggestions would be appreciated.

Create and sync an empty folder to your phone as I expained in your other post hereI have an album on my iPhone 4 called "Photo Stream, From My Computer." And i have no way of deleting any picture in that album or deleting the album. I have searched around forever and found nothing that worked. Please help! (I run iOS 7) . That will remove any orphaned albums previously synced to your phone.

Report J_1IEWT_CERT getting cancelled, generating ABAP dump!

A long running report J_1IEWT_CERT in background mode is getting cancelled after running for a while and generating the following dump :
Error analysis
    When changing or deleting one or more lines of the internal table
    "\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]" or when inserting in the table
     "\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]", 0 was used as
    the line index. An index less than or equal to zero is not
    allowed.
    The error can occur when using the following options:
    1. "INDEX idx" for specifying the line number in the table
     "\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]"
       where you want to change, insert or delete.
    2. "FROM idx" for specifying the start index when deleting a line
       area from or inserting a line area into the table
     "\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]".
    3. "TO idx" for specifying the end index when deleting a line
       area from or inserting a line area into the table
     "\PROGRAM=J_1IEWT_CERT\DATA=PRINTTAB[]".
    At the time of the termination, the table contained 17008 lines.
How to correct the error
    If the error occurred in your own ABAP program or in an SAP
    program you modified, try to remove the error.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "TABLE_INVALID_INDEX" " "
    "J_1IEWT_CERT" or "J_1IEWT_CERT_F01"
    "FILTER_DATA"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
    1. The description of the current problem (short dump)
       To save the description, choose "System->List->Save->Local File
    (Unconverted)".
    2. Corresponding system log
       Display the system log by calling transaction SM21.
       Restrict the time interval to 10 minutes before and five minutes
    after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
Tried searching for some SAP Notes to fix the issue, no success as of now, Please help me out...

Have you checked these notes ?
363107 Short dump occurs during TDS certificate printing.
803806 Error while genrating TDS certificate 03.01.2005
1066049 J1INCERT - Error while generating TDS certificate
Regards,
Subhash

NEED HELP TO FAX FROM MY PRINTER ASAP!

how do i start set up process to send a fax from my HP Photosmart D110a series printer?

Unfortunately The HP PhotoSmart D110a doesn't support the faxing feature. This printer only supports Print, Scan, Copy, ePrint, and print apps.
I work for HP but my posts and replies are my own thoughts.
If I have solved your issue, please feel free to provide kudos
Make it easier for other people to find solutions, by marking my answer with Accept as Solution if it solves your issue.

Fax from computer to photosmart 7525 gets cancelled after spooling

Similar Messages

Maybe you are looking for