Fax issue with HP LaserJet 200 MFP M276

Hello,
I can't receive fax when my printergo to sleep mode. the line is ringing but the fax is not responding.
Will appreciate your promot responce.
Regards,

Hi,
Install the laetst firmware below, that should resolve a such:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-108130-7&cc=us&dlc=en&lc=en...
Fixes:
Addresses an issue where the device may not wake up from sleep mode when receiving a fax if it is connected to an improperly grounded 220v power source.
Be aware that you may instlal the firmware with the printer connected via USB or with a network cable.
If the printer is wirelessly connected to yoru router DO NOT update the firmware before connecting an ethernet cable to your router or a USB to your PC (depands on yoru printer model).
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Scanning issue with HP LaserJet M1536dnf MFP

I am getting the error messages in my windows 8 machines "The scanner is currently in use. Please wait until your previous task is completed and then try scanning again." I have a HP LaserJet M1536dnf MFP printer which is connected to the network and users connected to the network through wifi. I have installed the latest driver versions from hp.com. It will work for some time but again will face the same issue. In Windows 7 machines, there are no issues.If anybody is having solution to this problem please share.Thank you.

Welcome to the HP Forums fastndfury,
I see by your post that you are only getting the error on the Windows 8 computer, "The scanner is currently in use. Please wait until your previous task is completed and then try scanning again." I can help you with this issue.
I have provided a document to go through the steps to see if it will help resolve this issue.
'Another program has control of the scanner' Message Displays on the Computer When Scanning.
If you need further assistance, let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Printer HP Laserjet 200 MFP M276 is not printing in color

I am trying to get my printer to print in color, however I only get blue output, not in the least the colors it should print.
Any ideas what might be the cause?
FYI: I am using original HP toner
Thanks
Yvonne
This question was solved.
View Solution.

Welcome to the HP Forums YHendrikx,
I see by your post that you are only getting blue output.
I can help you with this issue.
Inspect the toner cartridge for damage:
1. Remove the toner cartridge from the product and verify that the sealing tape has been removed.
2. Check the memory chip for damage.
3. Examine the surface of the imaging drum on the bottom of the toner cartridge.
CAUTION: Do not touch the roller (imaging drum) on the bottom of the cartridge.
Fingerprints on the imaging drum can cause print-quality problems.
4. If you see any scratches, fingerprints, toner or other damage on the imaging drum, replace the toner.
5. If the imaging drum does not appear to be damaged, rock the toner cartridge gently several times and reinstall it. Print a few pages to see if the problem has resolved.
I have provided a document to go through the steps to see if it will help resolve this issue.
Troubleshooting Print Quality Issues.
Please provide in detail the results if you are still having issues.
What were the results of the supplies status page and the print quality page?
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP laserjet 400 mfp and Laserjet 200 mfp

I have 2 printers HP Laserjet 200 mfp and HP Laserjet 400 MFP. I tried HP phone support. I checked each printer on 2 diffent networks to make sure it was not my setup. When I try and setup both printers with Web Services they both say unable to connect to the internet. I did a firmware update on both printers no help. HP told me that I needed to have a DMZ setup ie. port forwarding I don't think this is right.
Thanks
O.D. Smith (HP Retired)

Hi Smith,
Welcome to Consumer Support Forum.
As per the request you have 2 printer and u want to connect through n.w
In 400 mfp printer, please connect the n/w cabel(Physical Cabel)
and print a configration report, you will get the ip address of the printer.
I want you to check the ip of the printer and the ip of the computer are in same range or not, if its in same range
please try to ping the ip through command prompt winodw
Once reply from the printer is confirmed printer can be installed easily.
Please reply if the issue persist.
Regards
HP

LaserJet pro 200 MFP M276

The touch screen does not work.

Hi @morgie ,
I see that you are experiencing issues with the touch screen not working. I can help you with this.
I have provided a document to see if we can resolve this issue.
The Printer Display Is Blank or Black.
Disregard the title.
Please check your private messages for additional steps to try.
In the forum beside your handle name just click on the envelope to view it.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Problem with HP LaserJet M1319f MFP installation

Dear support team and community members,
I'm currently trying to install HP LaserJet M1319f MFP connected by USB on Lenovo Q190 machine /Intel Core i3 processor/ running freshly installed Windows 7 Enterprise 64 bit with Bulgarian
language pack, all current updates, Microsoft Forefront Protection /I also tried to disable the Real-time protection/, UAC disabled, administrator account, IE 11, .NET Framework 4.5.1.
The priter was working correctly with Windows XP.
I downloaded the driver package from the official hp website.
After the installation process reach the "Copying files to the hard drive" stage the installer return error Printer Software Installer stopped working.
I tried running with Administrator privileges and/or Windows XP SP3 compatibility mode, but the same error occurs.
I tried Microsoft Fix It software for install/uninstall drivers too,but with no luck either.
I cleaned the cashe and temporary files around 10-15 times.
Windows update is not helping with the drivers too.
I tried to extract the files from the installer and manually add the printer and got error that the installation was not successful and below it says The file was not found /if I recall it correctly/
After that I tried HP Print and Scan Doctor software, but it displays that there is no driver installed and redirecting me to the driver download page.
I tried the Driver Wizard software too, but it returns that this model is no supported.
I tried to change the windows startup to "Selective startup" with "Load startup items" unchecked and all non-microsoft services disabled, but with no success.
Under Safe mode the install won't complete because of the Print Spooler service not running, which is running normally otherwise.
The "ntprint.inf" file is present in the "Windows\inf" folder, the registry HKLM\SYSTEM\CurrentControlSet\Control\Print\Enviroments\Windows NT x86 has only Drivers and Print
Processors subkeys and the registry HKLM\SYSTEM\CurrentControlSet\Control\Print\Monitors has only Local Port, Microsoft Shared Fax monitor, Standard TCP/IP Port, USB monitor and WSD port subkeys.
The folders Windows\System32\spool\PRINTERS and Windows\System32\spool\drivers\W32X86 are empty.
I ran sfc /scannow in cmd with administrator privileges, but there was no integrity violations.
I tried to disable the IE component, but no luck either.
So now I’m out of any ideas how to connect that **bleep** thing… I hope that someone can help me with this issue.
Currently the devices without installed driver in the Device Manager are "Hewlett-PackardHP LaserJet M1319f MFP" /Hardware IDs USBPRINT\Hewlett-PackardHP_La28A1 and Hewlett-PackardHP_La28A1/
and HP Scan /Hardware IDs USB\VID_03F0&PID_5817&REV_0100&MI_00 and USB\VID_03F0&PID_5817&MI_00/
I forgot to mention that I tried all kind of variations with these solutions with and without printer plugged in.
Thank you very much in advance for any kind of guidelines.
Best regards,
Ivan

Hello Rick,
Just as I mentioned above I'm using Microsoft Forefront Protection, but had no luck with disabling the Real-time protection - it is disabled,
but that chanage nothing.
The downloaded driver is for Windows 7 64 bit.
I did write to HP but I still got no answer from them... I already checked that support page, but I didn't get any information corresponding
to my problem, not to mention that a lot of that page is just copy/paste from another product and it's not relevant to that model.

Scanner error 22 with HP Laserjet M1210 MFP

Hello - I have an HP Laserjet M1210 MFP (fax, printer and scanner all in one) that has been working until yesterday. Now I am getting an error message "Scanner Error 22". I have tried to unpulg and replug the machine after a few minutues multiple time and restore factory default. But it still show the same error. I cannot make copies. I am frustrated and not sure what else to do. Please help!

The document scannere is having issues. Could be the ribbon connection, the scanner motor or the scanner assembly is having a hard time moving along the rail. If the unit is under warranty, bring in for service. If out of warranty all I can suggest is do a google search for the service manual and look for instructions for removing the scanner bezel and remove it and see if you can slide the scanner assembly back and forth and make sure it is seated correctly on the rail. I have had a couple of similar models where the scanner had sort of come off the track and removing the bezel and reseating solved the problem. Hope that is your issue and not a defective part in the scanner assembly.

Cannot scan with HP LaserJet M1005 MFP

I updated to Snow Leopard 10.6.3 yesterday. Big mistake as I cannot now scan with my HP LaserJet M1005 MFP. I have been unable to find a solution here or via Google. Does anyone know if this is possible? I realize this device has never been "Mac friendly" (one might even say, not compatible.... despite HP's over-generous claims), but I would have thought there would be a new driver for SL by now.
If not, could anyone recommend a non-HP scanner (not MFP) that works well with SL?
thanks!

Hi @3Digit ,
I see that you are having issues scanning, there isn't any scanning software in the HP folder. I would like to help you out today.
Open the HP Scan window with one of the following methods:
Double-click the HP Scan icon () for your printer on the Windows desktop.
Click the Windows icon (), click All Programs, click the HP folder, click the name of your printer, and then click HP Scan.
If you are missing the HP Scan software altogether, then the full software didn't install on the computer.
If that is the case, uninstall and reinstall the printer software. Here is the link for the newest drivers. Software & Drivers.
First do these steps, before installing the software, just to make sure it fully installs.
I would disable all the start up programs and temporarily turn off the Antivirus Software and any Real Time Scanning in the Antivirus Software also, to see if that is causing the issue. How to use MSCONFIG . Click on the Startup tab and click Disable all, Then click the Services tab and check Hide All Microsoft Services.
I have provided a document for how to scan. It is for Windows 7, but the steps will also work for Windows Vista.
Scan from Windows 7 With the Full Feature HP Software for HP LaserJet Multifunction Printers
How is the printer connected? (USB/Ethernet/Wireless)
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Problems with HP LaserJet 400 MFP M425dn

Firmware Datecode: 20121205
We can not access this MFU over VPN link. Otherer devices are accessed successfully.
As far as I understand there is an error in MTU Path Discovery.
tcpdump logs are attached.
Is there a way to change MTU of this device?
BTW, this MVU a bit randomly reboots when I open page "Settings" of "Networking" submenu (/hp/device/set_config_networkSettings.html?tab=Networking&menu=NetSettings) if option "System" -> "System Setup" -> "Language" is "Russian". But this is a very good feature since I've have not found the way to reboot this printer remotely.
Here I was tring to access web interface over VPN (IPSec), 192.168.4.135 is IP of my comp, 192.168.160.200 - is IP of MFU, 192.168.160.254 is a gateway:
$ tcpdump -n -r printer-1.pcap
reading from file printer-1.pcap, link-type EN10MB (Ethernet)
17:20:29.337867 IP 192.168.4.135.54147 > 192.168.160.200.80: Flags [S], seq 2356029847, win 8192, options [mss 1460,nop,nop,sackOK], length 0
17:20:29.338026 IP 192.168.160.200.80 > 192.168.4.135.54147: Flags [S.], seq 614551948, ack 2356029848, win 8760, options [mss 1460,nop,nop,sackOK], length 0
17:20:29.344909 IP 192.168.4.135.54147 > 192.168.160.200.80: Flags [.], ack 1, win 64240, length 0
17:20:29.348488 IP 192.168.4.135.54147 > 192.168.160.200.80: Flags [P.], seq 1:304, ack 1, win 64240, length 303
17:20:29.348564 IP 192.168.160.200.80 > 192.168.4.135.54147: Flags [.], ack 304, win 8457, length 0
17:20:29.378872 IP 192.168.160.200.80 > 192.168.4.135.54147: Flags [P.], seq 1:513, ack 304, win 8457, length 512
17:20:29.379063 IP 192.168.160.200.80 > 192.168.4.135.54147: Flags [.], seq 513:1973, ack 304, win 8457, length 1460
17:20:29.379100 IP 192.168.160.254 > 192.168.160.200: ICMP 192.168.4.135 unreachable - need to frag (mtu 1280), length 48
17:20:29.379103 IP 192.168.160.200.80 > 192.168.4.135.54147: Flags [.], seq 1973:3433, ack 304, win 8457, length 1460
17:20:29.379135 IP 192.168.160.254 > 192.168.160.200: ICMP 192.168.4.135 unreachable - need to frag (mtu 1280), length 48
17:20:29.379251 IP 192.168.160.200.80 > 192.168.4.135.54147: Flags [.], seq 1:1461, ack 304, win 8457, length 1460
17:20:29.379272 IP 192.168.160.254 > 192.168.160.200: ICMP 192.168.4.135 unreachable - need to frag (mtu 1280), length 48
17:20:29.379274 IP 192.168.160.200.80 > 192.168.4.135.54147: Flags [.], seq 1461:2921, ack 304, win 8457, length 1460
17:20:29.379304 IP 192.168.160.254 > 192.168.160.200: ICMP 192.168.4.135 unreachable - need to frag (mtu 1280), length 48
17:20:29.379306 IP 192.168.160.200.80 > 192.168.4.135.54147: Flags [.], seq 2921:4381, ack 304, win 8457, length 1460
17:20:29.379335 IP 192.168.160.254 > 192.168.160.200: ICMP 192.168.4.135 unreachable - need to frag (mtu 1280), length 48
17:20:29.379338 IP 192.168.160.200.80 > 192.168.4.135.54147: Flags [.], seq 1:1461, ack 304, win 8457, length 1460
This is more detailed view on some packets.
$ tcpdump -nv -r printer-1.pcap
17:20:29.379063 IP (tos 0x0, ttl 64, id 1, offset 0, flags [DF], proto TCP (6), length 1500)
192.168.160.200.80 > 192.168.4.135.54147: Flags [.], cksum 0x7233 (correct), seq 513:1973, ack 304, win 8457, length 1460
17:20:29.379100 IP (tos 0x0, ttl 64, id 62678, offset 0, flags [DF], proto ICMP (1), length 68)
192.168.160.254 > 192.168.160.200: ICMP 192.168.4.135 unreachable - need to frag (mtu 1280), length 48
IP (tos 0x0, ttl 64, id 1, offset 0, flags [DF], proto TCP (6), length 1500)
192.168.160.200.80 > 192.168.4.135.54147: Flags [.], seq 513:1973, ack 304, win 8457, length 1460
17:20:29.379103 IP (tos 0x0, ttl 64, id 1, offset 0, flags [DF], proto TCP (6), length 1500)
192.168.160.200.80 > 192.168.4.135.54147: Flags [.], cksum 0x5edf (correct), seq 1973:3433, ack 304, win 8457, length 1460
17:20:29.379135 IP (tos 0x0, ttl 64, id 62679, offset 0, flags [DF], proto ICMP (1), length 68)
192.168.160.254 > 192.168.160.200: ICMP 192.168.4.135 unreachable - need to frag (mtu 1280), length 48
IP (tos 0x0, ttl 64, id 1, offset 0, flags [DF], proto TCP (6), length 1500)
192.168.160.200.80 > 192.168.4.135.54147: Flags [.], seq 1973:3433, ack 304, win 8457, length 1460
17:20:29.379251 IP (tos 0x0, ttl 64, id 1, offset 0, flags [DF], proto TCP (6), length 1500)
192.168.160.200.80 > 192.168.4.135.54147: Flags [.], cksum 0x0c1c (correct), seq 1:1461, ack 304, win 8457,

Sandy0331,
I am sorry you are having this fax issue.
I think the best option would be for you to print out the fax log. I believe it will reprint the last 50 inbound and outbound faxes.
Check the fax activity log for errors.
a.Touch the Fax button, and then touch the Fax Menu button.
b.Open the Fax Reports menu.
c.Open the Fax Activity Log menu.
d.Select the Print Log Now option.
●If a phone is connected to the product, make sure that the phone is hung up.
●Disconnect all other lines between the fax and the product.
●Connect the product directly into the wall telephone jack and resend the fax.
Source: http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02853746/c02853746.pdf
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Scanning with HP LaserJet Pro MFP M127fn

Hello everyone,
I installed my printer HP LaserJet Pro MFP M127fn on a network. I am able to print from many different computers, but I can not scan. On computer where I want to install scanner I am using Ubuntu 12.04. I tried to use "Simple scan" and "Xsane", but these programs did not recognize scanner.
I would appriciate if someone can help me. Thanks in advance,
Ramiz

Hello @korda93 , and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the Ubuntu forums since this is appears to be an Ubuntu issue. You can do this at the Ubuntu Forums.
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Fax issue with HP OfficeJet 7210 All-in-one

Hi everyone,
I've got an issue with my HP OfficeJet 7210 All-in-one printer/fax (USB connection)
I'm under Mac OS X 10.5 (Leopard).
When I was under Tiger, my printer/fax worked properly.
After the upgrade to Leopard, the printer/fax was still installed (HP 7210 was displayed as installed in the printer list of the System Preferences).
The printer works fine but the fax doesn't ! An error consistenly occurs when I try to send a fax.
Thus, I decided to uninstall every HP components from my Mac. Then I proceeded a fresh install of the CD software/driver I received with my printer/fax.
During the installation, I get an error : "HP AIO TRAP has quit". I went further and continue the installation till the end by ignoring the problem.
The printer is still working fine but I'm unable to install my fax in the System Preferences because the fax simply doesn't appear either on the "Fax" tab or on the "More printer" tab.
Only an unuseful "Bluetooth" fax appear, I can install it but it's impossible to send a fax with it : http://users.cybernet.be/ptsalos/hp-leo1.png
In the "More printer" tab I got this : http://users.cybernet.be/ptsalos/hp-leo2.png ... It seems that no fax are detected (no fax are displayed in "HP AiO Télécopie" and the "Add" button is gray).
I hope you could help me !
PS: the fax works properly under Bootcamp with Windows XP PRO SP2
Thank you very much.
Message was edited by: phl00

OK, so enough software is available (or will so been available) for me to start posting these types of workarounds (and getting more of you up and running). And remember, what I am about to tell you is NOT supported by HP, so if you run into problems doing this do NOT call customer support. I am posting this stuff here to try to help out the community. I will stop posting if this gets abused (even once).
If you have an HP OfficeJet 7310 or 7210 printer, go to HP.com/support, tell it you have a 7410, and download the installer (follow my instructions on the [Beta Announcement|http://discussions.apple.com/thread.jspa?threadID=1252889&tstart=0 ] thread if you need more details.
Now follow these instructions:
Step 1: Run the installer, and follow the onscreen prompts.
Step 2: When the screen comes up to select your printer, check the box my printer isn't listed and continue.
Step 3: On the next screen select the OfficeJet 7400 Series and continue.
Step 4: Select the type of connectivity to your device.
Step 5: Install the software (this may take several minutes).
Step 6: When you get to the Setup Assistant, skip it. Make sure you de-select the two checkboxes before you continue otherwise it will remind you every time you log in.
Step 7: Go into the Print & Fax System Preference and manually add your print queue.
Step 8: Go into the Print & Fax System Preference and manually add your fax queue.
Step 9: Start using your device.
Congratulations, you now should have a fully functioning device under Leopard. So what won't work with this work around:
1) The documentation on your device will be wrong.
2) If you did not previously set up a station ID for the fax, one will not be set.
3) Device Manager will not know anything about your device so the functionality there will be pretty useless (most stuff can be done through other means though). However if you already have a Tiger install, even this should (theoretically work).
4) Good question, if you run into any other issues post them here, I may have forgotten something.
WARNING! WARNING! WARNING!
Please install the final drivers when they come out, and preferable the beta drivers too for your device too! Just because things are working for you does not mean that this configuration is supported (its not) or that there aren't any known problems (there may be, we certainly don't test it) so please take caution and update when possible.
Just trying to help.
Andrew

Automatically print fax call report from LaserJet 500 MFP M525

How do you set up an LaserJet 500 MFP M525 to automatically print out a Fax Call report after each fax is sent? We are receiving a report after each fax is received and I do not want that. I need to have proof of fax sent. Please help!!! thanks

Hi mllundee,
Sorry about that, I must have grabbed the wrong link when I wrote the message. :-s
I am looking for the User Guide for the LaserJet 500 MFP M525 now. Page 153 lists the notification setting. This should be the setting to get a report on sent faxes.
1. From the Home screen on the product control panel, scroll to and touch the Administration button.
2. Open the following menus:
Fax Settings
Fax Send Settings
Default Job Options
Notification
Please let me know if this helps or not.
AlliBee
I am an HP employee, but opinions expressed here are my own.
Click the thumbs up + button if I have helped you. Mark Accepted Solution if your problem is solved. If both apply......do both.

HP Laserjet 200 MFP M275NW

Hi,
The touch screen on my printer doesn't turn on anymore. I need to change the cartidge.
How do I rotate the print-cartidge carousel without the screen?
Thanks
Andy

Hi @AndyTran ,
I see that you are having issues rotating the carousel to change the toners, because the display isn't working. I would be happy to help you.
You can manually move the carousel backwards. On the left hand side, approximately where the red circle is showing on the picture, there is a whole with a white plastic piece inside, use a pen or something to push the white plastic piece and manually push back on the carousel to turn it. Don't touch the drum on the toners though, it can damage them.
For the issue with the display no longer working.
I would do a hard reset to see if that will resolve the issue.
Leave the printer on and unplug the power cable from the printer and wall outlet for 60 seconds.
Then reconnect the power cable to the printer and wall outlet rather than a surge protector.
This ensures the printer is receiving full power and may help this situation.
If the printer is still in warranty and you are having issues with the carousel or the touch screen, please call our technical support at 800-474-6836 and inquire about a replacement printer. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Fax Problem on HP laserjet 200 color MFP M276nw

HP Laser Jet 200 color MFP M276nw
fax problem
I continue to get fax confirmation pages even though the message is "no fax detected" and "0" page. I get several of these a day with no accompanying fax on my HP200 Color MFP
Has anyone had this problem?

Hi @ColtraneII,
I understand you are getting fax confirmation pages printing serveral times a day with the message "no fax detected".
I can help you with this issue today.
Check these settings for the fax:
Go to the wrench icon/fax setup menu/advanced setup/private receive/turn it off.
Go to the wrench icon/service /fax service/error correction/turn it off.
Go to the wrench icon/fax setup /advanced setup/fax speed/change it to medium.
Go to wrench icon/service menu/fax service/clear saved faxes.
If you are still having issues, then follow this document for checking the connections and settings for the fax.
Cannot Send or Receive Faxes.
Sorry for all the questions, but it will help to resolve this issue quicker.
What were the results of the fax test?
Are you able to send or receive faxes?
What type of connection do you have? (Analogue, DSL, Cable Modem)
Are you using the 2 wire fax cable?
Do you have distinctive ring set up on the line?
Is there any voice mail set up?
Do you have a answering machine? (Where is it connected to?)
Where is the fax cable connected to? (modem, wall jack)
Is there a phone also connected the printer?
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Cannot print duplex with hp laserjet 1536dnf mfp

I am using a HP LaserJet 1536 dnf MFP printer in Windows 8.1 with USB 2 connection. Cannot print on both sides of sheet because clicking on print properties does not bring up the properties dialog window. There is a momentary flicker as though it is trying to activate, but no window. It worked fine until a few days ago and I can't think of any change that might account for this. Any help with this problem will be greatly appreciated.

Hi @Marlin1 ,
I understand that you are having issues duplexing, the printer properties aren't opening to make any changes. I would really like to be able to help you resolve this issue.
You can always restore your computer back to a earlier time when everything was working properly. It may have been from a Windows Update. How to refresh, reset, or restore your PC on Windows 8.
If you would prefer not to do the System Restore, you can try the following steps provided:
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. http://www.hp.com/go/tools>Using HP Diagnostic Tools for HP Printers in Windows.
Uninstall and reinstall the printer software.
Uninstalling the Printer Software.
HP LaserJet Full Feature Software and Driver.
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Fax issue with HP LaserJet 200 MFP M276

Similar Messages

Maybe you are looking for