Fax line in modem not recognized by printer

Photosmart all in one 7520 series.  Fax attached to modem, not recognized by printer.  No live phone lines in the house, only comcast set up.  Hardware test passes, fax conneted to active telephone wall jack fails.  Any ideas?  I've plugged the telephone line in every available port.  Everything else work fine.

Hi,
Is it a digital or analog line ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Powerbook not recognizing hp printer drivers

    so, my powerbook for some reason is not recognizing new HP printer drivers. this has happened twice now with two different printers (both mac-compatible). this is a new thing--i used to use an HP printer quite happily with this laptop.
    here's what happens:
    i install. installation is successful, hooray. the hp device manager opens, i choose my device (the Deskjet F300, in this case), and i'm ready to go.
    i open Word to print a doc. i get an error saying "word cannot print due to a problem with the current printer."
    i open my Print Preferences panel and lo and behold, there's no printer in the list. i click the [+] button to add a printer.
    my Printer Browser appears. the DJ F300 appears in the list as a USB device (there are no other printers). I select it.
    in the subwindow below, i see this:
    -printer name: Deskjet F300
    -location: home
    -print using: [dropdown menu of printer drivers]
    i can't proceed until i select a driver. the F300 is not listed among the HP drivers in the dropdown menu, so i click the button that says More Printers.
    the AppleTalk browser opens. there are no printers, but after a moment, a dialog box pops up saying a new driver has been detected, and do i want to reload the browser? i click OK to reload the browser.
    and nothing happens. the driver still does not appear anywhere.
    i have uninstalled and reinstalled the software, both from the CD and by downloading it from HP's site. i have run disk utility, but it didn't help. does anyone have any ideas?
    if this is at all related--my computer also doesn't recognize that i've agreed to my iTunes user agreement (i have to re-agree every time i launch iTunes) and it doesn't remember that i want make iPhoto my default (although i click OK every time). it also won't remember changes to my screen saver--all small, annoying things i can live with, but maybe a clue to what's not working?
    g4 titanium powerbook Mac OS X (10.4)

    Liz, when you download the new drivers from HP's site download them to your desktop, then open HP's folder, and drag the download to this folder it could be located in the Applications folder or the Utility folder, Then and only after you drag it in the HP folder double click it to launch the drivers.
    When you use the installer or just plug in the USB it may or maynot print. This will normally give you the folder I speak of in one or more locations. When you go to Hp's site it normally will not download the upates and drivers to that folder and launch them. You have to double click them.
    Don

  • Fax modem not recognized

    I'm trying to use my iMac's fax capabilities and it's just not working. I have a US Robotics 56k connected to my iMac via a Keyspan USB/Serial adapter. The modem does not show up as a choice when I try to add it in the Print & Fax Preference Pane. The Keyspan adapter does show up in the Network Pane.

    Hi,
    Is it a digital or analog line ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Apple USB Modem not Recognized

    eMac 700MHz, 256 MB RAM. OS 10.4.8 with all current updates. USB seems to work fine for keyboard and Mouse. This eMac has no internal modem, so I got the Apple USB Modem.
    The modem is not seen by the operating system. I open the Network Preference Pane, and all I see is Ethernet. If I try to add a network port, I only see Ethernet, 6 to 4, and Firewire.
    I tried a 2nd Apple USB modem with identical results. I can't help thinking there should be some command-line magic or nvram hack, or maybe a firmware upgrade that will make this thing work.
    Any suggestions greatly appreciated.
    Various   Mac OS X (10.4.8)  

    in the network preferences do you have configure ipv4 set to ppp? from here there should be a modem tab where you can select your modem from a (very long)list. if you have already done this, have you checked your system profiler to see if the modem is detected when it is connected??

  • AirPort Extreme Base Station with Modem not recognized by airport utililty,

    My Apple M8799LL/A AirPort Extreme Base Station with Modem and Antenna Port is no longer recognized by the airport setup utility, nor will it allow internet connection. Has worked fine until last weekend when I did a full disk utility on all of my drives. Now I get a message, none of your trusted networks are available would I like to join (my network name)? Airport looks fine, can connect locally, lights up as usual.
    How can I make it trusted again and get dial up internet to work again?

    resetting has worked for months with no return of the problem.

  • How to get past 6700 not recognizing new print heads.

    Ok, so I bought a new printer that came with setup cartridges. I wanted one with network capabilites so I took it back to the store and got a new  hp 6700 all in one.  But when I took the other one back I forgot to include the start upcartridges in the box I took back.  So this gave me two sets of start up ink.  Once my first set ran out I tried to put the other set in and I got the message Cartridge problem'.
    I have gone thru all the troubleshooting steps and it still won't clear.  I even went so far as to buy additional brand new cartiridges. So i have now two sets of new ink sets.
    I know it is due to me trying to put in the other set  of startup ink.  But how do I clear the message and get it to work>?  I have only printed  300 sheets out of this thing and now I can't use it.   And now I am out of warrenty!  When I haven't used it but for 2 months.  Help I am so frustrated am ready to throw this perfectly good printer in the trash!  Bad product configuration not being allowed to use any HP ink that is for use for the same printer!

    Hi,
    Please ensure you insert a full set of Non-Setup cartridges, inserting a Non-used startup cartridge to a printer which was already initialized may cause such an error.
    Any startup ink is labled with the "Setup" label, ensure all the 4 cartridges in the printer does not labled as a setup cartridge, then turn the pritner off and back on.
    If you still see any issue, please clarify the exact error message as listed on teh pritner screen, including any cartridge mark which may appear (it should list a specific color icon).
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Epson Stylus SX205 not recognized as printer, only as scanner

    I try to get my Epson Stylus SX205 printer/scanner to work on my ArchLinux, but can't. The scanner part works fine, but the printer part doesn't. I have tried all the tricks in the wiki article on Cups, including adding udev rules as suggested in the section on "Device node permissions", but to no avail.
    I don't know what information to post yet, other than this:
    Kernel: 3.6.5-1-ARCH
    Cups:1.6.1-6
    Printer driver: epson-inkjet-printer-escpr-1.2.2-1
    Not (yet) using systemD
    Any help/pointer will be much appreciated. 
    /Bent
    Edit: I forgot to mention that I get this message in the system: "udev-configure-printer: no corresponding CUPS device found"
    Last edited by BentB (2012-11-05 07:05:16)

    Step 1
    Open the Sharing pane in System Preferences. If the Computer Name is not set, enter a name. You may first have to click the lock icon in the lower left corner and authenticate to unlock the settings.
    Credit for this solution to ASC user Yuengdog1983.
    Step 2
    If there's no improvement after Step 1, restore the following folder from the last backup you made before the EPSON update:
    /Library/Printers/EPSON
    You may have to reset the printing system for the change to become effective.

  • Modem not recognized

    my CDMA USB Modem shows up in lsusb or dmesg with vendor- and product number
    but there is no device /dev/USB* or /dev/ACM* to see
    i found also a string in /sys/ /devices/usb/ where even the company name Qualcomm is there
    kppp does not find any modem
    how can i connect my modem
    please help thanks

    sorry but i've not experience with that technology
    i say you only to follow ubuntu, or gentoo, or debian wiki to solve it
    or going to productor site to see if there is any linux install guide ....

  • Nforce onboard-modem not recognized.. ?

    Hi Folks,
    i've just blanked my HD and installed Win XP brand new.
    Now.... all the drivers of the unified packages 1.13 and 2.00 installed well, but in both cases - the modem drivers are missing ??
    Both times in the device manager the "PCI-Modem" is indicated with a question mark as missing drivers and therefore not working.
    Also, there is no modem folder after i unpacked the unified drivers ...?
    Where to get the driver for the onboard AC97 Modem ??
    Regards, Chris
    (Modem is activated in BIOS)

    Quote
    Originally posted by Thufir
    No Modem ?
    I thought i remember something like an onboard modem  in the ads when i bought the board ..?   X(
    I just wonder why it is mentioned in the BIOS and why Windows displays it as device without driver ?
    Regards, CHris
    (maybe there are boards out with an onboard modem as extra feature ?)
    I think its in the BIOS because they derived the BIOS from a standard template. I just looked at the box my nForce came in and its not even listed as an option. Whats onboard is a LAN NIC for communications. And its a very good one as long as your hub is up to snuff.
    As to Windows.. did you assemble your computer? Maybe someone stuck a modem in there for you.

  • HP Laserjet 6p is not recognized in Printer Setup Utility

    I bought recently used HP Laserjet 6p printer and connected my PB to it's Apple Talk port via AsanteTalk Box. After I installed the HP 6p printer driver (downloaded from the HP site) I've tried several times to find the printer in the Printer Setup Utility but it doesn't appear on it! I've even downloaded a printer driver for MacOS 9 and tried to print in Classic environment but can't find any HP printer in the Chooser. Is there any solution for this problem?
    I'll be very thankful for any suggestions.

    Apple included the Gimp-Print driver "HP Laserjet 6 Series" for that printer. Does that show up?

  • I'm just adding a user to my printer and it is not recognizing the printer. what should i do next?

    What should I do next?

    Please follow the instructions here in order and answer all questions in detail.
    http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Want-Good-Answers-Ask-Good-Questions/td...
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • Garageband not recognizing external inputs from minijack entrance

    Hello
    I need to connect a sound mixer to the Macbook via minijack audio entrance. Even I have changed the settings for audio input in System Preferences (from internal mic to external line) garageband is not recognizing any external input and internal microphoen is always active.
    Someone had the same problem?
    Thankx

    Change the input in Garageband > Preferences > Audio Midi.

  • CUPS not recognizing Epson USB-Printer

    I'm trying to get an Epson Stylus Office Box BX300F to work with Arch x86_64.
    I have followed the CUPS wiki page closely and have installed everything it told me to.
    When i connected to http://localhost:631/admin and clicked 'add printer' the USB printer was not listed. dmesg however showed me that the printer is at least recognized to some extent:
    [ 2295.813154] usb 2-1: new high speed USB device number 6 using ehci_hcd
    [ 2295.951540] usblp0: USB Bidirectional printer dev 6 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0848
    [ 2297.177498] usb 2-1: usbfs: interface 1 claimed by usblp while 'usb' sets config #1
    I tried blacklisting usblp, but then, after rebooting, it got not recognized at all, so i undid that.
    Then i found the printer in the openprint db (link), found the driver that is listed as working perfectly there in the AUR (link) and installed that package. But it doesn't seem to help at all, CUPS still doesn't list any USB printer. I've included the full section of /var/log/cups/error_log with loglevel=debug, hope it helps. Any suggestions on how i can get the printer working are greatly appreciated.
    cupsd restarted at 20:31:19 ; i refreshed http://localhost:631/admin at 20:31:24 ; and i clicked 'add printer' at 20:31:30
    I [05/Jul/2011:20:31:19 +0200] Listening to [v1.::1]:631 (IPv6)
    I [05/Jul/2011:20:31:19 +0200] Listening to 127.0.0.1:631 (IPv4)
    I [05/Jul/2011:20:31:19 +0200] Listening to /var/run/cups/cups.sock (Domain)
    I [05/Jul/2011:20:31:19 +0200] Remote access is disabled.
    D [05/Jul/2011:20:31:19 +0200] Added auto ServerAlias klapptop
    I [05/Jul/2011:20:31:19 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
    I [05/Jul/2011:20:31:19 +0200] Using default TempDir of /var/spool/cups/tmp...
    I [05/Jul/2011:20:31:19 +0200] Configured for up to 100 clients.
    I [05/Jul/2011:20:31:19 +0200] Allowing up to 100 client connections per host.
    I [05/Jul/2011:20:31:19 +0200] Using policy "default" as the default!
    D [05/Jul/2011:20:31:19 +0200] load_ppd: Loading /var/cache/cups/Virtual_PDF_Printer.ipp4...
    D [05/Jul/2011:20:31:19 +0200] cupsdRegisterPrinter(p=0x7f8696d72660(Virtual_PDF_Printer))
    D [05/Jul/2011:20:31:19 +0200] cupsdMarkDirty(---p--)
    D [05/Jul/2011:20:31:19 +0200] cupsdSetBusyState: Dirty files
    I [05/Jul/2011:20:31:19 +0200] Partial reload complete.
    I [05/Jul/2011:20:31:19 +0200] Listening to [v1.::1]:631 on fd 3...
    I [05/Jul/2011:20:31:19 +0200] Listening to 127.0.0.1:631 on fd 6...
    I [05/Jul/2011:20:31:19 +0200] Listening to /var/run/cups/cups.sock on fd 7...
    I [05/Jul/2011:20:31:19 +0200] Resuming new connection processing...
    D [05/Jul/2011:20:31:19 +0200] cupsdRegisterPrinter(p=0x7f8696d72660(Virtual_PDF_Printer))
    D [05/Jul/2011:20:31:19 +0200] Discarding unused server-restarted event...
    D [05/Jul/2011:20:31:19 +0200] PID 1508 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [05/Jul/2011:20:31:20 +0200] Report: clients=0
    D [05/Jul/2011:20:31:20 +0200] Report: jobs=2
    D [05/Jul/2011:20:31:20 +0200] Report: jobs-active=0
    D [05/Jul/2011:20:31:20 +0200] Report: printers=1
    D [05/Jul/2011:20:31:20 +0200] Report: printers-implicit=0
    D [05/Jul/2011:20:31:20 +0200] Report: stringpool-string-count=859
    D [05/Jul/2011:20:31:20 +0200] Report: stringpool-alloc-bytes=9192
    D [05/Jul/2011:20:31:20 +0200] Report: stringpool-total-bytes=17984
    D [05/Jul/2011:20:31:24 +0200] cupsdAcceptClient: 11 from localhost:631 (IPv6)
    D [05/Jul/2011:20:31:24 +0200] cupsdReadClient: 11 GET /admin/?OP=redirect HTTP/1.1
    D [05/Jul/2011:20:31:24 +0200] cupsdSetBusyState: Active clients and dirty files
    D [05/Jul/2011:20:31:24 +0200] cupsdAuthorize: Authorized as root using Basic
    D [05/Jul/2011:20:31:24 +0200] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
    D [05/Jul/2011:20:31:24 +0200] [CGI] argv[1] = "OP=redirect"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@klapptop"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.7"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[13] = "USER=root"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[16] = "IPP_PORT=631"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[17] = "AUTH_TYPE=Basic"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[18] = "LANG=de.UTF8"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[22] = "SERVER_PORT=631"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[23] = "REMOTE_ADDR=[v1.::1]"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[25] = "SCRIPT_NAME=/admin/"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin/"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[27] = "REMOTE_USER=root"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=8ecaff0f260930f93ef5e9dff799b7c7"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[30] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Linux x86_64; rv:5.0) Gecko/20100101 Firefox/5.0"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[31] = "REQUEST_METHOD=GET"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[32] = "QUERY_STRING=OP=redirect"
    D [05/Jul/2011:20:31:24 +0200] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 1509)
    I [05/Jul/2011:20:31:24 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=1509)
    D [05/Jul/2011:20:31:24 +0200] cupsdSendCommand: 11 file=12
    D [05/Jul/2011:20:31:24 +0200] [CGI] admin.cgi started...
    D [05/Jul/2011:20:31:24 +0200] cupsdAcceptClient: 13 from localhost (Domain)
    D [05/Jul/2011:20:31:24 +0200] [CGI] http=0x7f1f946405c0
    D [05/Jul/2011:20:31:24 +0200] [CGI] org.cups.sid cookie is "8ecaff0f260930f93ef5e9dff799b7c7"
    D [05/Jul/2011:20:31:24 +0200] [CGI] redirecting with prefix http://localhost:631!
    D [05/Jul/2011:20:31:24 +0200] cupsdReadClient: 13 WAITING Closing on EOF
    D [05/Jul/2011:20:31:24 +0200] cupsdCloseClient: 13
    D [05/Jul/2011:20:31:24 +0200] Script header: Location: http://localhost:631/admin
    D [05/Jul/2011:20:31:24 +0200] Script header:
    D [05/Jul/2011:20:31:24 +0200] cupsdSetBusyState: Dirty files
    D [05/Jul/2011:20:31:24 +0200] PID 1509 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [05/Jul/2011:20:31:24 +0200] cupsdReadClient: 11 GET /admin HTTP/1.1
    D [05/Jul/2011:20:31:24 +0200] cupsdSetBusyState: Active clients and dirty files
    D [05/Jul/2011:20:31:24 +0200] cupsdAuthorize: No authentication data provided.
    D [05/Jul/2011:20:31:24 +0200] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@klapptop"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.7"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[13] = "USER=root"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[16] = "IPP_PORT=631"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[17] = "LANG=de.UTF8"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[18] = "REDIRECT_STATUS=1"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[19] = "GATEWAY_INTERFACE=CGI/1.1"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[20] = "SERVER_NAME=localhost"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[21] = "SERVER_PORT=631"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[22] = "REMOTE_ADDR=[v1.::1]"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[23] = "REMOTE_HOST=localhost"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[24] = "SCRIPT_NAME=/admin"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[25] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[26] = "SERVER_PROTOCOL=HTTP/1.1"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[27] = "HTTP_COOKIE=org.cups.sid=8ecaff0f260930f93ef5e9dff799b7c7"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[28] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Linux x86_64; rv:5.0) Gecko/20100101 Firefox/5.0"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[29] = "REQUEST_METHOD=GET"
    D [05/Jul/2011:20:31:24 +0200] [CGI] envp[30] = "QUERY_STRING="
    D [05/Jul/2011:20:31:24 +0200] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 1510)
    I [05/Jul/2011:20:31:24 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=1510)
    D [05/Jul/2011:20:31:24 +0200] cupsdSendCommand: 11 file=12
    D [05/Jul/2011:20:31:24 +0200] [CGI] admin.cgi started...
    D [05/Jul/2011:20:31:24 +0200] cupsdAcceptClient: 13 from localhost (Domain)
    D [05/Jul/2011:20:31:24 +0200] [CGI] http=0x7f7248b935c0
    D [05/Jul/2011:20:31:24 +0200] [CGI] org.cups.sid cookie is "8ecaff0f260930f93ef5e9dff799b7c7"
    D [05/Jul/2011:20:31:24 +0200] [CGI] No form data, showing main menu...
    D [05/Jul/2011:20:31:24 +0200] [CGI] /usr/share/cups/drivers/pscript5.dll: No such file or directory
    D [05/Jul/2011:20:31:24 +0200] cupsdReadClient: 13 POST / HTTP/1.1
    D [05/Jul/2011:20:31:24 +0200] cupsdAuthorize: No authentication data provided.
    D [05/Jul/2011:20:31:24 +0200] cupsdReadClient: 13 1.1 Get-Subscriptions 1
    D [05/Jul/2011:20:31:24 +0200] Get-Subscriptions ipp://localhost/
    D [05/Jul/2011:20:31:24 +0200] Returning IPP successful-ok for Get-Subscriptions (ipp://localhost/) from localhost
    D [05/Jul/2011:20:31:24 +0200] Script header: Content-Type: text/html;charset=utf-8
    D [05/Jul/2011:20:31:24 +0200] Script header:
    D [05/Jul/2011:20:31:24 +0200] cupsdReadClient: 13 WAITING Closing on EOF
    D [05/Jul/2011:20:31:24 +0200] cupsdCloseClient: 13
    D [05/Jul/2011:20:31:24 +0200] cupsdSetBusyState: Dirty files
    D [05/Jul/2011:20:31:24 +0200] PID 1510 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 11 POST /admin/ HTTP/1.1
    D [05/Jul/2011:20:31:30 +0200] cupsdSetBusyState: Active clients and dirty files
    D [05/Jul/2011:20:31:30 +0200] cupsdAuthorize: Authorized as root using Basic
    D [05/Jul/2011:20:31:30 +0200] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/admin.cgi"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@klapptop"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.7"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[13] = "USER=root"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[16] = "IPP_PORT=631"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[17] = "AUTH_TYPE=Basic"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[18] = "LANG=de.UTF8"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[22] = "SERVER_PORT=631"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[23] = "REMOTE_ADDR=[v1.::1]"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[25] = "SCRIPT_NAME=/admin/"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/admin/"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[27] = "REMOTE_USER=root"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[29] = "HTTP_COOKIE=org.cups.sid=8ecaff0f260930f93ef5e9dff799b7c7"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[30] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Linux x86_64; rv:5.0) Gecko/20100101 Firefox/5.0"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[31] = "HTTP_REFERER=http://localhost:631/admin"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[32] = "REQUEST_METHOD=POST"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[33] = "CONTENT_LENGTH=60"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[34] = "CONTENT_TYPE=application/x-www-form-urlencoded"
    D [05/Jul/2011:20:31:30 +0200] [CGI] Started /usr/lib/cups/cgi-bin/admin.cgi (PID 1511)
    I [05/Jul/2011:20:31:30 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=1511)
    D [05/Jul/2011:20:31:30 +0200] cupsdSendCommand: 11 file=13
    D [05/Jul/2011:20:31:30 +0200] [CGI] admin.cgi started...
    D [05/Jul/2011:20:31:30 +0200] cupsdAcceptClient: 14 from localhost (Domain)
    D [05/Jul/2011:20:31:30 +0200] [CGI] http=0x7f2a6b99e5c0
    D [05/Jul/2011:20:31:30 +0200] [CGI] org.cups.sid cookie is "8ecaff0f260930f93ef5e9dff799b7c7"
    D [05/Jul/2011:20:31:30 +0200] [CGI] op="add-printer"...
    D [05/Jul/2011:20:31:30 +0200] [CGI] do_am_printer: DEVICE_URI="(null)"
    D [05/Jul/2011:20:31:30 +0200] [CGI] Getting list of devices...
    D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 14 POST / HTTP/1.1
    D [05/Jul/2011:20:31:30 +0200] cupsdAuthorize: No authentication data provided.
    D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 14 1.1 CUPS-Get-Devices 1
    D [05/Jul/2011:20:31:30 +0200] CUPS-Get-Devices
    D [05/Jul/2011:20:31:30 +0200] cupsdIsAuthorized: username=""
    D [05/Jul/2011:20:31:30 +0200] Returning HTTP Unauthorized for CUPS-Get-Devices (no URI) from localhost
    D [05/Jul/2011:20:31:30 +0200] cupsdSendHeader: 14 WWW-Authenticate: Basic realm="CUPS", trc="y"
    D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 14 WAITING Closing on EOF
    D [05/Jul/2011:20:31:30 +0200] cupsdCloseClient: 14
    D [05/Jul/2011:20:31:30 +0200] cupsdAcceptClient: 14 from localhost (Domain)
    D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 14 WAITING Closing on EOF
    D [05/Jul/2011:20:31:30 +0200] cupsdCloseClient: 14
    D [05/Jul/2011:20:31:30 +0200] cupsdAcceptClient: 14 from localhost (Domain)
    D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 14 POST / HTTP/1.1
    D [05/Jul/2011:20:31:30 +0200] cupsdAuthorize: Authorized as root using Local
    D [05/Jul/2011:20:31:30 +0200] cupsdReadClient: 14 1.1 CUPS-Get-Devices 1
    D [05/Jul/2011:20:31:30 +0200] CUPS-Get-Devices
    D [05/Jul/2011:20:31:30 +0200] cupsdIsAuthorized: username="root"
    D [05/Jul/2011:20:31:30 +0200] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
    D [05/Jul/2011:20:31:30 +0200] [CGI] argv[1] = "1"
    D [05/Jul/2011:20:31:30 +0200] [CGI] argv[2] = "0"
    D [05/Jul/2011:20:31:30 +0200] [CGI] argv[3] = "5"
    D [05/Jul/2011:20:31:30 +0200] [CGI] argv[4] = "2"
    D [05/Jul/2011:20:31:30 +0200] [CGI] argv[5] = "requested-attributes=all"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@klapptop"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.7"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[13] = "USER=root"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[16] = "IPP_PORT=631"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[17] = "AUTH_TYPE=Local"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[18] = "LANG=de.UTF8"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[22] = "SERVER_PORT=631"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[23] = "REMOTE_ADDR="
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[25] = "SCRIPT_NAME=/"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[27] = "REMOTE_USER=root"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/1.4.7"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[30] = "REQUEST_METHOD=POST"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[31] = "CONTENT_LENGTH=88"
    D [05/Jul/2011:20:31:30 +0200] [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
    D [05/Jul/2011:20:31:30 +0200] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 1512)
    I [05/Jul/2011:20:31:30 +0200] Started "/usr/lib/cups/daemon/cups-deviced" (pid=1512)
    D [05/Jul/2011:20:31:30 +0200] cupsdSendCommand: 14 file=15
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/http (PID 1513)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/socket (PID 1514)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/snmp (PID 1515)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 1516)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 1517)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/smb (PID 1518)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/lpd (PID 1519)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/beh (PID 1520)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/dnssd (PID 1521)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/scsi (PID 1522)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 1523)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/cups-pdf (PID 1524)
    D [05/Jul/2011:20:31:30 +0200] [CGI] list_devices
    D [05/Jul/2011:20:31:30 +0200] [CGI] usb_find_busses=6
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/parallel (PID 1525)
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/bluetooth (PID 1526)
    D [05/Jul/2011:20:31:30 +0200] [CGI] perl: warning: Setting locale failed.
    D [05/Jul/2011:20:31:30 +0200] [CGI] perl: warning: Please check that your locale settings:
    D [05/Jul/2011:20:31:30 +0200] [CGI] LANGUAGE = (unset),
    D [05/Jul/2011:20:31:30 +0200] [CGI] LC_ALL = (unset),
    D [05/Jul/2011:20:31:30 +0200] [CGI] LANG = "de.UTF8"
    D [05/Jul/2011:20:31:30 +0200] [CGI] are supported and installed on your system.
    D [05/Jul/2011:20:31:30 +0200] [CGI] perl: warning: Falling back to the standard locale ("C").
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/ipp (PID 1527)
    D [05/Jul/2011:20:31:30 +0200] Script header: Content-Type: application/ipp
    D [05/Jul/2011:20:31:30 +0200] Script header:
    D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "http"...
    D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "socket"...
    D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "smb"...
    D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "beh"...
    D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "cups-pdf:/"...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1514 (socket) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1516 (mdns) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1518 (smb) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1520 (beh) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1524 (cups-pdf) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "lpd"...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1513 (http) exited with no errors.
    E [05/Jul/2011:20:31:30 +0200] [CGI] Unable to create avahi client: Resource temporarily unavailable
    E [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1521 (dnssd) stopped with status 1!
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1525 (parallel) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1522 (scsi) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "scsi"...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1526 (bluetooth) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1519 (lpd) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [CGI] Flushed attributes...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] Found device "ipp"...
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1527 (ipp) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1523 (serial) exited with no errors.
    D [05/Jul/2011:20:31:30 +0200] [CGI] usb_find_devices=9
    D [05/Jul/2011:20:31:30 +0200] [cups-deviced] PID 1517 (usb) exited with no errors.
    D [05/Jul/2011:20:31:32 +0200] [cups-deviced] PID 1515 (snmp) exited with no errors.
    D [05/Jul/2011:20:31:32 +0200] PID 1512 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
    D [05/Jul/2011:20:31:32 +0200] [CGI] Got device list!
    D [05/Jul/2011:20:31:32 +0200] cupsdReadClient: 14 WAITING Closing on EOF
    D [05/Jul/2011:20:31:32 +0200] cupsdCloseClient: 14
    D [05/Jul/2011:20:31:32 +0200] PID 1511 (/usr/lib/cups/cgi-bin/admin.cgi) exited with no errors.
    D [05/Jul/2011:20:31:32 +0200] Script header: Content-Type: text/html;charset=utf-8
    D [05/Jul/2011:20:31:32 +0200] Script header:
    D [05/Jul/2011:20:31:32 +0200] cupsdSetBusyState: Dirty files
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    D [05/Jul/2011:20:31:32 +0200] [CGI] Regular expression "[a-z]+://"
    I [05/Jul/2011:20:31:50 +0200] Generating printcap /etc/printcap...
    D [05/Jul/2011:20:31:50 +0200] cupsdSetBusyState: Not busy
    D [05/Jul/2011:20:32:02 +0200] cupsdReadClient: 11 WAITING Closing on EOF
    D [05/Jul/2011:20:32:02 +0200] cupsdCloseClient: 11

    I have gotten around to give this printer another try and when i connected it and read through /var/log/cups/error_log i noticed 2 lines close to the end that seem to be the problem:
    D [24/Aug/2011:12:42:23 +0200] [CGI] libusb couldn't open USB device /dev/bus/usb/002/006: Permission denied.
    D [24/Aug/2011:12:42:23 +0200] [CGI] libusb requires write access to USB device nodes.
    i checked the permissions, but they seem to be allright:
    $ ls -l /dev/bus/usb/002/006
    crw-rw-r--+ 1 root scanner 189, 133 24. Aug 12:42 /dev/bus/usb/002/006
    $ id
    ...,7(lp),10(wheel),96(scanner),97(camera)
    here is the complete part of error_log from connecting the printer:
    D [24/Aug/2011:12:42:23 +0200] cupsdAcceptClient: 12 from localhost (Domain)
    D [24/Aug/2011:12:42:23 +0200] Report: clients=1
    D [24/Aug/2011:12:42:23 +0200] Report: jobs=2
    D [24/Aug/2011:12:42:23 +0200] Report: jobs-active=0
    D [24/Aug/2011:12:42:23 +0200] Report: printers=1
    D [24/Aug/2011:12:42:23 +0200] Report: printers-implicit=0
    D [24/Aug/2011:12:42:23 +0200] Report: stringpool-string-count=859
    D [24/Aug/2011:12:42:23 +0200] Report: stringpool-alloc-bytes=9192
    D [24/Aug/2011:12:42:23 +0200] Report: stringpool-total-bytes=17984
    D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 POST / HTTP/1.1
    D [24/Aug/2011:12:42:23 +0200] cupsdSetBusyState: Active clients
    D [24/Aug/2011:12:42:23 +0200] cupsdAuthorize: No authentication data provided.
    D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 1.1 CUPS-Get-Devices 1
    D [24/Aug/2011:12:42:23 +0200] CUPS-Get-Devices
    D [24/Aug/2011:12:42:23 +0200] cupsdIsAuthorized: username=""
    D [24/Aug/2011:12:42:23 +0200] Returning HTTP Unauthorized for CUPS-Get-Devices (no URI) from localhost
    D [24/Aug/2011:12:42:23 +0200] cupsdSendHeader: 12 WWW-Authenticate: Basic realm="CUPS", trc="y"
    D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 WAITING Closing on EOF
    D [24/Aug/2011:12:42:23 +0200] cupsdCloseClient: 12
    D [24/Aug/2011:12:42:23 +0200] cupsdSetBusyState: Not busy
    D [24/Aug/2011:12:42:23 +0200] cupsdAcceptClient: 12 from localhost (Domain)
    D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 WAITING Closing on EOF
    D [24/Aug/2011:12:42:23 +0200] cupsdCloseClient: 12
    D [24/Aug/2011:12:42:23 +0200] cupsdAcceptClient: 12 from localhost (Domain)
    D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 POST / HTTP/1.1
    D [24/Aug/2011:12:42:23 +0200] cupsdSetBusyState: Active clients
    D [24/Aug/2011:12:42:23 +0200] cupsdAuthorize: Authorized as root using PeerCred
    D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 1.1 CUPS-Get-Devices 1
    D [24/Aug/2011:12:42:23 +0200] CUPS-Get-Devices
    D [24/Aug/2011:12:42:23 +0200] cupsdIsAuthorized: username="root"
    D [24/Aug/2011:12:42:23 +0200] [CGI] argv[0] = "/usr/lib/cups/daemon/cups-deviced"
    D [24/Aug/2011:12:42:23 +0200] [CGI] argv[1] = "1"
    D [24/Aug/2011:12:42:23 +0200] [CGI] argv[2] = "0"
    D [24/Aug/2011:12:42:23 +0200] [CGI] argv[3] = "2"
    D [24/Aug/2011:12:42:23 +0200] [CGI] argv[4] = "2"
    D [24/Aug/2011:12:42:23 +0200] [CGI] argv[5] = "requested-attributes=all exclude-schemes='beh','cups-pdf','bluetooth','dnssd','http','https','ipp','lpd','ncp','parallel','scsi','smb','snmp','socket'"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/doc"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[10] = "SERVER_ADMIN=root@klapptop"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[11] = "SOFTWARE=CUPS/1.4.8"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[13] = "USER=root"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[14] = "CUPS_SERVER=/var/run/cups/cups.sock"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[15] = "CUPS_ENCRYPTION=IfRequested"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[16] = "IPP_PORT=631"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[17] = "AUTH_TYPE=PeerCred"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[18] = "LANG=en_US.UTF8"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[19] = "REDIRECT_STATUS=1"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[20] = "GATEWAY_INTERFACE=CGI/1.1"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[21] = "SERVER_NAME=localhost"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[22] = "SERVER_PORT=631"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[23] = "REMOTE_ADDR="
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[24] = "REMOTE_HOST=localhost"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[25] = "SCRIPT_NAME=/"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[26] = "SCRIPT_FILENAME=/usr/share/cups/doc/"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[27] = "REMOTE_USER=root"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[28] = "SERVER_PROTOCOL=HTTP/1.1"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[29] = "HTTP_USER_AGENT=CUPS/1.4.8"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[30] = "REQUEST_METHOD=POST"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[31] = "CONTENT_LENGTH=244"
    D [24/Aug/2011:12:42:23 +0200] [CGI] envp[32] = "CONTENT_TYPE=application/ipp"
    D [24/Aug/2011:12:42:23 +0200] [CGI] Started /usr/lib/cups/daemon/cups-deviced (PID 1501)
    I [24/Aug/2011:12:42:23 +0200] Started "/usr/lib/cups/daemon/cups-deviced" (pid=1501)
    D [24/Aug/2011:12:42:23 +0200] cupsdSendCommand: 12 file=14
    D [24/Aug/2011:12:42:23 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/mdns (PID 1502)
    D [24/Aug/2011:12:42:23 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/usb (PID 1503)
    D [24/Aug/2011:12:42:23 +0200] [cups-deviced] Started backend /usr/lib/cups/backend/serial (PID 1504)
    D [24/Aug/2011:12:42:23 +0200] [CGI] list_devices
    D [24/Aug/2011:12:42:23 +0200] [CGI] usb_find_busses=6
    D [24/Aug/2011:12:42:23 +0200] [cups-deviced] PID 1504 (serial) exited with no errors.
    D [24/Aug/2011:12:42:23 +0200] [cups-deviced] PID 1502 (mdns) exited with no errors.
    D [24/Aug/2011:12:42:23 +0200] [CGI] usb_find_devices=9
    D [24/Aug/2011:12:42:23 +0200] [CGI] libusb couldn't open USB device /dev/bus/usb/002/006: Permission denied.
    D [24/Aug/2011:12:42:23 +0200] [CGI] libusb requires write access to USB device nodes.
    D [24/Aug/2011:12:42:23 +0200] [cups-deviced] PID 1503 (usb) exited with no errors.
    D [24/Aug/2011:12:42:23 +0200] PID 1501 (/usr/lib/cups/daemon/cups-deviced) exited with no errors.
    D [24/Aug/2011:12:42:23 +0200] Script header: Content-Type: application/ipp
    D [24/Aug/2011:12:42:23 +0200] Script header:
    D [24/Aug/2011:12:42:23 +0200] cupsdSetBusyState: Not busy
    D [24/Aug/2011:12:42:23 +0200] cupsdReadClient: 12 WAITING Closing on EOF
    D [24/Aug/2011:12:42:23 +0200] cupsdCloseClient: 12
    i found a related thread ( https://bbs.archlinux.org/viewtopic.php?id=110477 ) but that deals with digital cameras, so it doesn't really help me. Other forum threads i found about libusb permission errors were mostly people that forgot to add themselves to lp and the like. Does anyone know why i get the permission errors and how i can fix it? Any help is greatly appreciated!

  • External modem not receiving faxes

    I have an Apple external modem plugged into the USB port on my partner's iMac 24" 2.16 GHz Intel Core 2 Duo, running OS X 10.5.6.
    I cannot get it to answer the fax line and pick up faxes. In the Network system panel External Modem shows as Not Connected. When I click "advanced" the system seems to recognize the fact that an Apple modem is hooked up.
    Any idea how to get this to work?

    Hi Keith, that sounds like a munged plist/pref, but since I don't have one of those Modems to find the right one I may not be of much help, but the ones that may affect I think would be these...
    /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
    /Library/Preferences/SystemConfiguration/SystemConfiguration/
    Another thing to try is dragging these whole folders to the Desktop, then reboot..
    /Users/nnnn/Library/Preferences
    /Library/Preferences/SystemConfiguration/SystemConfiguration
    Look for files like this also...
    /Users/YourUserName/Library/ByHost/com.apple.PrefPane.Network.<12digitHexNumber> .plist
    Or...
    /Users/YourUserName/Library/Preferences/ByHost/com.apple.networkConnect.<12digit HexNumber>.plist

  • "Let others send fax through this computer" - problem: modem not showing up

    I have a macbook that does not have an internal modem for faxing. I am using another networked mac in our office that has an internal modem for faxing. I have set up the printing and fax preferences to "let others send faxes through this computer" on the mac that can fax. It has worked in the past, but this morning when I went to fax from my macbook, I cannot see the modem in the mac that can fax. I have also checked with other macs in the office and they can't see it either. Network is okay, I can access the computer through connect to server, I have repaired permissions, restarted and still no modem showing up or shared printers showing up. I have not updated anything on the mac that can fax. Any ideas?

    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1801.html
    Strange, not sure why it's not showing up.
    Have you confirmed that the fax printer is working on the host Mac? Maybe try turning off the sharing and deleting the existing Fax Printer in the Fax List with /Applications/Utilities/Printer Setup Utility, and creating the Fax Printer again, and turn on sharing again.

Maybe you are looking for

  • Mouse fellow

    Hello, i'm begining to work with Flash Professional 8 and i have a problem. Pershaps somebody can help. I want that when anybody comes to my site the mouse pointer change to another form and it follow the mouse while the background (there ist two sam

  • Whts the need of static ....

    Simple code.... in the following code ... wht is the need of "static" import java.io.*; public class sample static int a=34; public static void main(String args[]) System.out.println(a); What "Static " actually means?

  • In correct planned Delivery cost

    Dear Experts, I have created one scheduling agreement with quantity 15000 with conditions basic price and delivery cost in percentage 1.65%. Then I have scheduled 5000 quantity in it. But when I take goods receipt of 5000 quantity the delivery cost i

  • Why I can not see the plus +  to add a contact

    After I updated my iphone I can not add or delete contacts. The + sign is not there.

  • GCTWAIN_PPC is where?

    I have a couple of Intel Macbooks that I want to use Graphic Converter with for scanning... On my newer Macbook Pro, I have managed to get Graphic Converter to scan with my Canon MP 640, but the older one gives me this message: To open GCTWAIN_PPC, y