Fax machine dialing from FXS without 9 in CCME

Hi everyone,
I have a fax machine connected to a FXS port (voice-port 0/1/0). We use the PRI for inbound and outbound calls (voice-port 0/0/0:23). I can currently make calls from the fax through the PRI but I have to dial 9. How can I not force the fax machine to dial 9?
Thanks!
Stephen

Is this a H323 or MGCP gateway ? If using H323
Use separate dial-peers for dialing from fax machines
dial-peer voice 1 pots
destination-pattern [2-9]...... (7 digit dialing in this case)
port 1/0/0:23
Then use COR so that phones wont have access to these dial-peers. Only fax machine ports should.

Similar Messages

What causes my fax to dial out 911 without my doing anything?

My HP Officejet Pro 8600 has dialed 911 twice in the past 6 months without me doing anything other than leaving it plugged into the phone line for faxes. What might be causing this? I did not even use the machine for faxes during that time and the police have knocked on my door stating they received a 911 call from my phone number which is only being used for this fax machine.

Hello,
This is very unusual. Have you printed out a fax confirmation report to verify that the call was indeed made from the fax machine? Is it possible that a speed dial was setup and accidentially initiated?
You can reset the fax machine to factory defaults which will erase any stored information by touching Settings - Tools - Restore Factory Defaults
Thank you
I was an HP employee.
Kudos are appreciated if I have helped you.

UC560 - PRI and Fax machine via FXS

I have been keeping the fax machine separate from the UC500 for all of my deployments but now I need to know if I can put a fax machine on a FXS port. I am configured with a PRI circuit.

Sure, that's very common.

Can i fax direct from iMac without buying a fax machine?

how do I fax from my imac without having to buy a separate fax machine

To send a fax, you need to have a fax modem (not found in any modern Mac or PC anymore) or to use an internet fax service like this.
http://www.myfax.com/chp/
Or if you have a multy function printer/scanner/fax machine, you can scan a document and fax it.
Or you can buy a USB modem.

Multifunction Printer/Scanner/FAX machines and FAXing from the desktop.

I've got a Canon MP530 thanks to an Apple Bundle and after a lot of gyrations, it has come down to be that neither I, Canon, nor Apple can make this unit send or recieve FAXs from the desktop!
Apple seems to be "stunned" (better word than "clueless") about this lack of functionality. Canon's response is (literally) "Buy a PC."
I know I can do software that will let me FAX but but that is not an option at this point. I've got four machines who all can plug into the same printer/scanner/unit and there's no reason that this machine shouldn't be able to send a FAX for me.
So, I'm here posting this message wondering if anyone has purchased an "All-in-one" unit (preferably part of an Apple bundle) that supports printing from the computer, scanning to the computer, and FAXing to and from the computer and that they've actually used (themselves) and seen work.

Yes absolutely. I set it up last Fall and have been using it until last week, at whick time I lost wireless connectivity with router for no reason at all. I can not remember how to do it now and I am looking for the answer myself.
This link to an online chat on www.hp.com with a tech might help you.
http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-006&h_lang=en&h_cc=us&h_product=3204781&h_client=S-A...
I unfortunately upgraded my browser to IE8 last week and the chat support online does not support that browser. If you get an answer, I would appreciate it if you would post the answer on this thread so that I can re-learn it myself. Thanks. Good Luck.

Junk characters in the purchase order fax received from the fax machine

Dear Experts,
I am facing the following issue.
I am sending the PO form to a fax number from ME22N using the FAX medium. The PO form is designed by sapscript.
I am getting the fax too from the fax machine. But it is not in the format designed by sapscript. I get junk characters printed line by line. For 1 page of PO form, I get around 7 pages printed with the junk characters.
I checked the trace in SOST, it is taking the device type converts OTF to PDF.
I checked the settings in the SCOT transaction. The device type is set as PDF1. I changed various device types but still the same.
The printer I am using is Fuji Xerox - DocuCentre-III C4405
Any idea how to get the form in the right format.
<removed by moderator>
Cheers,
Edited by: Thomas Zloch on Oct 29, 2010 12:46 PM

Dear Sruthi,,
U can done through this by the BADI ME_PROCESS_PO_CUST. IN that there is a Method PROCESS_ITEM.
Just Implement ur Code inside this and u can change the Texts here.
IF_PURCHASE_ORDER_ITEM_MM - IF_LONGTEXTS_MM~GET_TEXT
By this u can get the texts and for setting
IF_LONGTEXTS_MM~SET_TEXT
Hope this can solve ur probs.
With Regards,
Sumodh.P

SPA 3102: Troubles with fax machine connected to SPA and dialing by IP PBX

Afternoon!
I have a fax machine connected to the SPA3102 and i have configured an extension from the IP PBX, that it's working as a fax, so the problem here is that sometimes when i'm sending a fax, this one fail, it shows an error, the other problem is that i'm not receiving any fax at all, the people get the tone, and actually send the fax, and here it shows "receiving" (it's the weird part) but after 40-50 seconds everything fail, it shows "error communication"
Hoping for help
Victor

Hello,
as far as I know, FAX and VoIP aren't the best friends - those technologies are not designed to work together smoothly ...
You may try following tuning :
Set your fax machine to 9600 (not 14400),
Make sure you only use G711a (Europe) or G711u (US) codec (fax will not work with others).
Activate T38 FAX support if your device FW offers such possibility.

Problem getting scan of pix from printer/scanner/fax machine

Long used P E to get pix scanned by printer/scanner/fax. Then I bought a slide scanner and installed, and PE brought in slides scanned by separate machine. Disconnected slide scanner. Now whenI try to get pix scanned by printer/scanner/fax, it says it "Can't find the slide scanner" and SHUTS DOWN. How can I reset PE to get the scanned pix from the printer/scanner/fax again. It has no trouble going to the printer/scanner/fax to print pix.
Cindi

Open Organizer and on the top menu click Edit à Preferences à Scanner
I tried the website and help searching for scan, I have had every PE since
2 and have 48,000 pix in my catalogue, so I'm pretty knowledgeable about
the program. I also searched under file. I usually go to Get photos and
thought it should give a choice under scanner there. Never thought to go to
Edit and Preferences.
In a message dated 3/14/2012 7:16:58 P.M. Eastern Daylight Time,
[email protected] writes:
Re: Problem getting scan of pix from printer/scanner/fax machine
created by Brett N (http://forums.adobe.com/people/Brett+N) in
Photoshop Elements - View the full discussion
(http://forums.adobe.com/message/4267751#4267751)

Relay Mail from FAX Machine to the Outside World via GMAIL

Hey everyone, I am not really sure I am in the right place here, but I am tired of running into a brick wall over this issue.
Here is my basic issue:
I have a fax machine that supports a functionality known as Fax to email. The machine is new, but Ricoh (5510nf) does not seem to be up on things when it comes to configuration.
The machine does not support SSL authentication, and for that matter I believe it requires an open relay to work (that is what Ricoh told me).
So what I need is for the fax machine to use the OS X mail services (or any service/program...) to send a scanned image along the net to the recipient's address. So I log into the fax machine via it's internal address, and the settings of the fax machine include the following:
SMTP Server:
POP Server:
Host Name:
E-Mail Address:
Domain Name:
Account Name:
Password:
Reception Interval(min.)
At first I thought this was going to be a no brainer, but it turns out that I am the no brainer.
The OS X Server is not really setup to do anything but serve files right now. It is not setup with DNS or other such services.

According to the available parameters you posted, the Fax machine supports authentication. This should be good enough to send through a mail server. It certainly does not require an open relay to send.
However, given that gmail requires SSL, you are indeed stuck. That said, I am not sure setting up your own mail server just for this makes lots of sense. Running a mail server has implications. You need to secure it to make sure it is not abused and it also requires a certain amount of maintenance.
I would rather try and use your ISP's SMTP server. Most likely they allow for sending without SSL and with authentication. Should this not be an option (unlikely), report back and I can try and help you to get your mail server up and running.
HTH,
Alex

Can i revert to snow leopard from lion without a time machine backup?

can I revert to snow leopard from lion without a time machine backup?

You can with a Snow Leopard DVD, but if you don't have that or a Time Machine backup there's no way.

If I saved something on my external drive as a back up / time machine can I delete from laptop without losing anything?

if I saved something on my external drive as a back up can I delete from laptop without losing anything?

No. Eventually, Time Machine will delete it from the backup. Time Machine is not a storage concept, it's a backup concept. If you need permanent file storage, then get another drive for that.

Downgrading from Mavericks to Mountain Lion WITHOUT time machine backup from Mountain Lion.

Hello. I'm one of the unlucky owners of Macbook Retina 15" Mid 2012. I was very satisfied with this computer, everything was great, untill I installed OS X Mavericks. My computer started to have GPU Panics all the time under some "heavier" usage like watching long videos on YouTube. I googled this problem and then I saw that I wasn't the only one, many people had problems after upgrading to Mavericks. I also read that downgrading to Mountain Lion solves the problem, but after the Internet Recovery update, when you are restoring your mac, it restores as Mavericks. I read Apple instruction how to revert os x, but it requires Time Machine backup from Mountain Lion, I already downloaded ML Installer from AppStore but I don't know how to install it.
Greetings,
Mdkn

If you have a Mountain Lion installer application then you can downgrade, but you will have to erase the drive. You should try backing up your Home folder in advance so you could at least restore your data. You will need to reinstall any third-party applications.
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
   2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
            3. Use DiskMaker X to put your installer clone onto the USB flash drive.
Wait for the process to complete which will take quite some time.
Use your new installer flash drive to boot the computer. Boot by doing:
Boot Using OPTION key:
1. Restart the computer.
2. Immediately after the chime press and hold down the
      "OPTION" key.
3. Release the key when the boot manager appears.
4. Select the disk icon for the USB flash drive.
5. Click on the arrow button below the icon.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
You will need an active Internet connection.

Fax Document From Computer to landline fax machine

i have a text edit file. is there a way or program that could fax to a landline fax machine?
so i dont hoave print out and use telephone fax
thanks

synesthesian wrote:
thanks, so there is no free service?
Someone has to pay for the service.
eFax used to be free for receiving faxes (they gave you a phone number and emailed them to you) but they always charged for sending faxes. Again, someone has to pay for the phone call and service.

Fax machine doesnot allow international

Dear sir ,
I am using CCME , i have configure internalional and national dialing and i can easily dial international calls by my ip phones .i have configure a login option when user login in phone he or she able to dial inernational calls but without login he/she can only dial national/local calls. i am facing a probem with my FAx machine which is connected to ATA device . with Fax machine i can send fax nationally/locally but cannot send fax internationally. and i didnt found any option in fax for login as we have in ip phones. please let me help what i am doing wrong.
some of the configuration are below i have try with removing pin command in ephone 68 but same problem.
==========================
url directories http://10.198.160.7:80/localdirectory
url services http://10.198.160.9/voiceview/common/login.do
url authentication http://10.198.160.9/voiceview/authentication/authenticate.do
login timeout 120 clear 19:00
after-hours block pattern 1 900
after-hours day Sun 00:00 23:59
after-hours day Mon 00:00 23:59
after-hours day Tue 00:00 23:59
after-hours day Wed 00:00 23:59
after-hours day Thu 00:00 23:59
after-hours day Fri 00:00 23:59
after-hours day Sat 00:00 23:59
ephone-dn 3 dual-line
number 2602
label business analyzer
name Ghada Konsowa
call-forward busy 4000
call-forward noan 4000 timeout 10
corlist incoming AllowedInternational
ephone-dn 68 dual-line
number 2667
label Fax1
call-forward busy 4000
call-forward noan 4000 timeout 40
corlist incoming AllowedInternational
ephone 3
no phone-ui speeddial-fastdial
no multicast-moh
mac-address 001F.9E26.CC61
username "KONSOWAG" password 12345
type 7975
button 1:3
ephone 68
no phone-ui speeddial-fastdial
no multicast-moh
mac-address 001F.9EAC.A6F3
max-calls-per-button 2
username "Fax " password 12345
type ata
button 1:68
pin 12345
i can easily international call by ip phones after login.

Hi zeeshan2007,
To exempt ephone 68 from call-blocking; you need to add after-hour exempt on ephone68, check this link for further explanations:
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeblock.html#wp1014483
HTH,

ATA186 makes fax machine constantly off hook

Hello
First post!
I have a Cisco ATA 186 that is connected to a HP officejet 4500 all-in-one fax/printer. The ATA is configured properly, I did connect a "higher end" fax machine and was able to dial out and in (with in the system)
this particular fax does not have a "hook" option. The display reads "phone off hook" all the time. The manual (yes I read it) states that there is an adapter that shoudl be used or the machine will read "phone off hook" all the time. This did not solve the problem.
I think the ATA always give a dial tone without being asked for it. IOW, the fax does not say "hey give me a dial tone please".
Is there a way of the ATA providing a dial tone when asked? Or maybe the fax is incompatible?
Thank you for your help....

This is my suggestion:
- check if the telephony cable has only 1 couple of wire (tip and ring only); in the past I had some problems with cable with 4 wire (2 couple); the ATA had a strange behavior;
- try to connect an analog telephone to the ATA186 and verify if it works;
- if the problem persists probably the ATA has an hardware fault;
- try with a different ATA;
Best Regards.

Fax machine dialing from FXS without 9 in CCME

Similar Messages

Maybe you are looking for