Fax machine integration in 3800 series router

How to configure FXO/FXS port on 3800 series router for analog fax machine use?
I am using VIC2 -4fxo & VIC3-4fxs.How would I configure the ports to support this and also the dial peer?
Thanks for any help/examples.
Regards,
Ajay Jose K

Dear all
I am using VIC2 -4fxo & VIC3-4fxs. Can i add vic cards directly to router ?

Similar Messages

Integrating a fax machine into CUCM 9

Dear All,
We've having a new request concerning Fax Machines integration.
Kindly confirm the possibility of integrating an existing fax machine into CUCM 9
we have a CUCM 9 cluster with Voice gateway includng E1 ISDN PRI.
If possible kindly provide details about protocols and feasibikity.
Awaiting your feedback,

Hi.
If faxes flow is not so high, you can consider ONRAMP and OFFRAMP VG application.
Here is a doc.
http://www.cisco.com/c/en/us/support/docs/voice/fax-modem-over-ip/47763-onramp-faxing.html
http://www.cisco.com/c/en/us/support/docs/voice/fax-modem-over-ip/47764-offramp-faxing.html
HTH
Regards
Carlo

Creating VLAN on Cisco 3800 Series

Hello
I am new to networking. We have a Cisco 3800 series router with 64 ports. We have connected servers and PC's directly to the back of the router. Almost all of the ports are used with the exception of few. We would like to create a VLAN for the remaining few ports. I am able to telnet to the router or connect directly using hyper terminal.
I have been told that we cannot create VLAN's directly on the router. For that purpose we need to first get a switch and connect the switch to the router, then create VLAN’s using the switch. Can someone please provide some tips? Any suggestions would be nice…Thanks

Appreciate you getting back. Here is the "show vlan-switch" output
----------------------->
#show vlan-switch
VLAN Name                             Status    Ports
1    default                          active
1002 fddi-default                     active
1003 token-ring-default               active
1004 fddinet-default                  active
1005 trnet-default                    active
VLAN Type SAID       MTU   Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
1    enet 100001     1500 -      -      -        -    -        1002   1003
1002 fddi 101002     1500 -      -      -        -    -        1      1003
1003 tr    101003     1500 1005   0      -        -    srb      1      1002
1004 fdnet 101004     1500 -      -      1        ibm -        0      0
1005 trnet 101005     1500 -      -      1        ibm -        0      0
---------------------->
As before I do not see any VLAN's set up. How come all the ports are not showing up on default VLAN 1. Maybe I can create a new VLAN and assign 2 or 3 ports to it. Please advise...Thanks

1600 Series Router & WIC-1ADSL

I have some 1600 series routers and was hoping to use them for my Broadband connection.
Is this WIC compatable with the 1600 series router?
What is the required IoS if this is posible?
Thanks Ian

Ganesh,Thank you for the response, however, that article is for the WIC-1DSU-T1 as far as I can see.I was wanting information regarding the WIC-1ADSL. which does not appear to be recognised in my 1603R routers.Thanks Ian
Ian,
The ADSL WAN interface cards (WICs) supported on the Cisco 1700/2600/3700 series routers are also supported on the Cisco 1800 (modular), 2800, 3800 series Integrated Services Routers (ISRs).
As per the link it start supported only from 1700 series routers ony.
Check out the below link hope that clears out your query !!
http://www.cisco.com/en/US/prod/collateral/routers/ps221/product_data_sheet0900aecd8028aa5a.html
If helpful do rate the valauble post
Ganesh.H

Unable to fax wirelessly with my HP 6500 fax machine

I am trying to fax PDF documents from my imac computer utilizing my HP 6500 E709n all in one series fax which I am connecting to wirelessly in my office. I have downloaded all drivers necessary and my "FAX Hardware Test" passed with flying colors BUT when I attempt to actually fax a document a get a error in the print que that says "Waiting for Modem to become available". How can I get this to work ?Any suggestion? The fax machine works when faxing it's just when I attempt to do it through the imac that the above error comes up.

You shouldn't need to run it from the BIOS. You can access the Hardware Diagnostic Tool from Windows.
Start , All Programs, PC Help & Tools, and then Hardware Diagnostic Tools.
Here is the full document with other ways to run the tool as well. Hardware DIagnostics is at the bottom.
I work on behalf of HP (But this isn't my job)
Mark my post as “Accept as Solution" if you feel my post solved your issue, so that others with the same question can find the answer.
Please give me Kudos if I wrote something that helped you.

License on the Cisco 3900 Series router.

I am trying to understand what does the "data" license exactly do on the Cisco 3900 series router. What I understood is that the data license supports "MPLS.ATM. Multiprotocol support".
Question is is a do not have this license will I not be able to run BGP, EIGRP and terminate service provider links?
Technology Package License Information for Module:'c3900e'
Technology    Technology-package                  Technology-package
              Current              Type           Next reboot
ipbase        ipbasek9             Permanent      ipbasek9
security      securityk9           Permanent      securityk9
uc            None                 None           None
data          None                 None           None
NtwkEss       None                 None           None
CollabPro     None                 None           None
Configuration register is 0x2102
Thanks,
Nik

I think WAAS express is one of the technologies you will lose out on. Amongst other advanced features. See link below.
http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/software-activation-on-integrated-services-routers-isr/white_paper_c11_556985.html
EDIT: And performance routing.

Brother fax machine unable to fax to ATA186

We have a customer with a Brother 4750E fax machine. They are unable to fax multi page documents to our fax machines attached to ATA186. They are able to send with out a problem to other non-ATA fax machines. No one else has mentioned a problem. Any ideas how to troubleshoot this?
Thanks,
Andy

Remember this:
- ATA only allows speeds below 14.4K
- ATA have 2 modes
Passtrough using NSE and Fax Only(no NSE)
- Faxes also depens on Router configs. If Router is configured for passtrough, ATA should be configured for passtrough only.
- ATA load have been historically buggy for sending Faxes, same with routers.
- Test all fax modes and debug NSE packets if fax passtrough is being used.
- Fax protocol using passthough or fax mode is very sensible to IP packet lost. If you lost more that 0.1% packets, fax quality will be awfull or will fail.
- ATA and routers does not support G3 upspeeding to 33.4K
- H323 and MGCP configs for faxes are very different. There are bug for MGCP and H323 for faxing.

Use of Fax Machines on Broad Band Talk

Does anyone know if the broadband talk phone line is stable enough to allow it to be used as a fax line? I know fax is old tech but we still need one for some of our customers and suppliers (all to do with signatures!) and I am not about to rent a dedicated line! I know that in the past, phase jitter meant that fax machines were not too good on voip lines.

Are you sure that the incoming calls are coming in on your broadband talk number, and not your PSTN number?
Remember that the phone socket on the hub will receive both lines, if you have set it up that way. The PSTN is simply routed straight through to the socket on an incoming calll. This does not use VOIP.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Re: newer iMac (mid-2010 w/Snow Leopard) fax operation w/o external fax machine

Noting that Apple no longer offers an external USB fax modem product, are similar kinds of devices (like, for example, USRobotics5637 or Zoom3095) reliable for sending (via the print menu in OS X 10.6.x applications) and receiving?
An existing "automatic fax switch" is already connected to the landline, and it routes incoming calls now to the phone handset (after initially listening for incoming fax handshaking signals, which it is assumed would be routed to the iMac -- where they are archived and displayed is yet to be determined) or to the voice answering machine if the handset isn't picked-up after a few rings. This has been serving admirably as a way to screen incoming calls, BTW!)). My Internet connection is an ISP DSL, which wouldn't come into play if I'm sending/receiving fax via landline, at "dial-up" speeds and protocols through te external USB fax modem, as I understand it.
My understanding is that the USB external fax modem would be connected to a USB port (USB keyboard or rear panel of the iMac) and the RJ11 connector on the other end of that fax modem would be connected to RJ11 "fax modem" receptical on the existing "automatic fax switch". I'm guessing that the "automatic fax switch" would go off-hook and dial up the phone number of the distant fax machine, from phone number data provided in the "send a fax" set-up invoked when "send a fax" is selected as a "print" option in an OS X 10.6.x application.
Please advise if the equipment and scenario described, and elaborate on anything I'm missing, will work for the intended goal.
thanks,
dL

Gaston,
This is not the correct Feedback venue for your issue.
Please select an appropriate product from those displayed HERE and use the corresponding form to communicate to the correct department.
ali b

How to connect my copy/fax machine?

how to connect my copy/fax machine?

Did you follow the instructions that came with the unit? At what step exactly did you have a problem at?
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Trying to Download a Software Image to Cisco 2800 series router through TFTP Using the tftpdnld ROMmon Command

Trying to Download a Software Image to Cisco 2800 series router through TFTP Using the tftpdnld ROMmon Command
and I am getting an Error , I cant figure out what I am doing wrong. I have also pasted my display down here can someone help me out, thanks in advance, I am still new to this utility.
My questions are How do you direct this utility to point to the desktop or the TFTP folder
does FE_PORT: Fast Ethernet 0 imply or point to Fa0/0 on my router
My router is suppose to have 10.0.0.3 255.0.0.0
Gateway of 10.0.0.1 255.0.0.0
My TFTP Server 10.0.0.2 255.0.0.0
How do I get the MAC address of the Router or the TFTP Server and which one is required?
my Ethernet port is 100Mb/Sec I cant tell whether it is full duplex or not so How do i set this FE_SPEED_MODE: Auto???
=====================================================================================
rommon 10 >
rommon 10 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
?=0
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
TFTP_FILE=
rommon 11 > TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
rommon 12 > TFTP_CHECKSUM=0
rommon 13 > SET
monitor: command "SET" not found
rommon 14 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
?=0
TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
TFTP_CHECKSUM=0
rommon 15 > tftpdnld
          IP_ADDRESS: 10.0.0.3
      IP_SUBNET_MASK: 255.0.0.0
     DEFAULT_GATEWAY: 10.0.0.1
         TFTP_SERVER: 10.0.0.2
           TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
        TFTP_VERBOSE: Progress
    TFTP_RETRY_COUNT: 18
        TFTP_TIMEOUT: 7200
       TFTP_CHECKSUM: No
        TFTP_MACADDR: 30:37:a6:49:35:a8
             FE_PORT: Fast Ethernet 0
       FE_SPEED_MODE: Auto
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash: will be lost!
Do you wish to continue? y/n: [n]: y
ARP: address resolution for 10.0.0.2 timed out.
ARP failed with failure code 1. TFTP transfer aborted.
TFTP: Operation terminated prematurely.
rommon 16 >       " not found
rommon 17 >FE_SPEED_MODE=2
variable name contains illegal (non-printable) characters
rommon
rommon 18 > set
PS1=rommon ! >
FE_PORT=0
WARM_REBOOT=
RET_2_RTS=20:35:55 UTC Thu Sep 25 2014
BSI=0
RET_2_RCALTS=
RANDOM_NUM=1600357627
IP_ADDRESS=10.0.0.3
IP_SUBNET_MASK=255.0.0.0
DEFAULT_GATEWAY=10.0.0.1
TFTP_SERVER=10.0.0.2
TFTP_FILE=c2800nm-adventerprisek9-mz.124-24.T4
TFTP_CHECKSUM=0
?=0
rommon 19 > tftpdnld [ur]
usage: tftpdnld [-hr]
Use this command for disaster recovery only to recover an image via TFTP.
Monitor variables are used to set up parameters for the transfer.
(Syntax: "VARIABLE_NAME=value" and use "set" to show current variables.)
"ctrl-c" or "break" stops the transfer before flash erase begins.
The following variables are REQUIRED to be set for tftpdnld:
            IP_ADDRESS: The IP address for this unit
        IP_SUBNET_MASK: The subnet mask for this unit
       DEFAULT_GATEWAY: The default gateway for this unit
           TFTP_SERVER: The IP address of the server to fetch from
             TFTP_FILE: The filename to fetch
The following variables are OPTIONAL:
          TFTP_VERBOSE: Print setting. 0=quiet, 1=progress(default), 2=verbose
      TFTP_RETRY_COUNT: Retry count for ARP and TFTP (default=18)
          TFTP_TIMEOUT: Overall timeout of operation in seconds (default=7200)
         TFTP_CHECKSUM: Perform checksum test on image, 0=no, 1=yes (default=1)
          TFTP_MACADDR: The MAC address for this unit
               FE_PORT: 0= (default), 1
         FE_SPEED_MODE: 0=10/hdx, 1=10/fdx, 2=100/hdx, 3=100/fdx,
                        5=Auto (default)
      TFTP_DESTINATION: The flash destination device for the file
                        flash:(default), usbflash0:, usbflash1:
Command line options:
   -h: this help screen
   -r: do not write flash, load to DRAM only and launch image
rommon 20 > tftpdnld
          IP_ADDRESS: 10.0.0.3
      IP_SUBNET_MASK: 255.0.0.0
     DEFAULT_GATEWAY: 10.0.0.1
         TFTP_SERVER: 10.0.0.2
           TFTP_FILE: c2800nm-adventerprisek9-mz.124-24.T4
        TFTP_VERBOSE: Progress
    TFTP_RETRY_COUNT: 18
        TFTP_TIMEOUT: 7200
       TFTP_CHECKSUM: No
        TFTP_MACADDR: 30:37:a6:49:35:a8
             FE_PORT: Fast Ethernet 0
       FE_SPEED_MODE: Auto
Invoke this command for disaster recovery only.
WARNING: all existing data in all partitions on flash: will be lost!
Do you wish to continue? y/n: [n]: y
ARP: address resolution for 10.0.0.2 timed out.
ARP failed with failure code 1. TFTP transfer aborted.
TFTP: Operation terminated prematurely.
rommon 21 >

What I notice in the original post is this error
ARP: address resolution for 10.0.0.2 timed out.
which says that the router is looking for the 10.0.0.2 server but not getting response to its arp request. Can the original poster clarify for us how the device that has the image file is connected to the router that has the problem? Also what kind of device is 10.0.0.2? Is it a PC running TFTP server software or is it something else?
HTH
Rick

2900 Series Router - Over 700 failed login attempts - How do I find the source IP?

There is a 2900 series router Version 15.0(1)M1, in our company, recently the logs show that there were over 700 failed login attempts to try and gain privelege level 15 access. Is there a way to see the source IP from the host that is attempting the logins?

There is a 2900 series router Version 15.0(1)M1, in our company, recently the logs show that there were over 700 failed login attempts to try and gain privelege level 15 access. Is there a way to see the source IP from the host that is attempting the logins?

I installed Firefox 2 days ago (Windows Vista)& my fax machine / HP 6700 will not accept faxes now, how do I correct this problem?

my fax machine will not receive a fax.
Is there some sort of firewall or something preventing this?
or a control panel somewhere where I choose this option?
I re set the fax machine and that did not help.
None of your tutorials helped either. I could not find anything related.
I am a small business and need my fax machine.

Contact HP to set up your Fax, as edmister said.
Browsers (Internet Explorer, Firefox, Chrome) have no interaction with your fax machine, faxes are analog technology run over telephone lines, browsers are digital technology, that while it can be run over a phone line (like in DSL) Has no impact on your fax.

How to bridge a linksys cisco E1200 series router?

I have recently purchased a linksys cisco E1200 series router and would like to know how to bridge the connection to my xbox

purchase 881w, get rid of linksys. That should do it.
Sent from Cisco Technical Support iPad App

Junk characters in the purchase order fax received from the fax machine

Dear Experts,
I am facing the following issue.
I am sending the PO form to a fax number from ME22N using the FAX medium. The PO form is designed by sapscript.
I am getting the fax too from the fax machine. But it is not in the format designed by sapscript. I get junk characters printed line by line. For 1 page of PO form, I get around 7 pages printed with the junk characters.
I checked the trace in SOST, it is taking the device type converts OTF to PDF.
I checked the settings in the SCOT transaction. The device type is set as PDF1. I changed various device types but still the same.
The printer I am using is Fuji Xerox - DocuCentre-III C4405
Any idea how to get the form in the right format.
<removed by moderator>
Cheers,
Edited by: Thomas Zloch on Oct 29, 2010 12:46 PM

Dear Sruthi,,
U can done through this by the BADI ME_PROCESS_PO_CUST. IN that there is a Method PROCESS_ITEM.
Just Implement ur Code inside this and u can change the Texts here.
IF_PURCHASE_ORDER_ITEM_MM - IF_LONGTEXTS_MM~GET_TEXT
By this u can get the texts and for setting
IF_LONGTEXTS_MM~SET_TEXT
Hope this can solve ur probs.
With Regards,
Sumodh.P

Fax machine integration in 3800 series router

Similar Messages

Maybe you are looking for