Fax output logo printing text is not

Hello All,
I am sending a document to fax using communication type as 2. The document is going to the fax machine and is printing only the logo but the text is being printed as garbage characters. In the spool I can see that the document is shown correclty. The interface is topcall.
Can anyone suggest why the text is not being printed while the logo is.
Thanks in advance,
Ranjan

Hi Ranjan,
Is the text in your document in English or some other Asian langauge.If so you need to have some settings done at Windows as well SAP side.
Thanks
Sudharshan

Similar Messages

Objects print Text does not?

Hi
I installed a new black ink cartridge
and only objects print text will not print.
I drew a black box to test the black ink and
a dark gray box prints but not black.
My main concern is text will not print or
only very faintly.
I wiped the contacts on the cartridge but no difference.
The printer is and HP 830c which as always worked.
thanks in advance

Turn off print color - print grayscale to test black ink cartridge. Continually print black boxes full ink until print head clears and wipe head with wet hot cotton ball. Black print slowly gets better and better. These were re manufactured print cartridges from PrintPal.
from original poster

OPEN DATASET FOR OUTPUT IN LEGACY TEXT MODE not working!

Hi All,
I need your expertise to help me with my problem.
The program passed through the code OPEN DATASET ... FOR OUTPUT IN LEGACY TEXT MODE. Then it gave an error message "Error Accessing File /home/sap/sample.txt".
I would like to know what are the causes of this error. Please explain to me further why the program gives an error message specified above because I'm not familiar in OPEN DATASET.
Please reply asap since the issue need to be resolved immediately.
Thanks in advance,
Carina

Hi Carmey,
The Problem will u need toi get Open Dataset Authorisation from ur Basis Team from the Specified Path.
Regards,
Morris Bond.
Reward Points if Helpful.

In PO print text is not displaying?

Hi all,
IN PO printout text which i maintained in PO item text is not displaying, how to enable the same?
regards,
Sanjana

You have to make changes in the print program to pick the same.
Texts are not stored in any table directly. They are stored in STXH Header texts and STXL Item texts in an encrypted formats. You have to use Function module FM READ_TEXT to read the same.
Please contact your programmer.

Use desformat=spreadsheet output Excel,print percent setting not 100%,why?

In version 10.1.2
use desformat=spreadsheet output excel,
Open the excel file,and print view,the print percent lower 100%,
how to set report file,make output excel print view 100%?
thanks for any help!
lind

Be sure you put the heading the same size as your column because otherwise it will not insert the diffent columns in seperate columns in excell

Header text is not dispalying in english for billing document print output

Hi All,
I am working on script for billing document.
I am maintain the header text for the document.I have enrted the header text in english text is not displaying in print output.If i maintain the text in french i am able to see the output.
I am logging into the system with lanauage EN only.Can yo please let me know how can i displzy english text in my print output.

Pass SY-LANGU as the value for input parameter LANGUAGE in FM READ_TEXT.
Regards
Vinod

Not printing text-only graphics on Canon. Not printer problem-print ok on Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Not printing text only on Canon--grahics print ok. Not printer problem. Prints ok on a Brother and another network Apple prints ok on Canon. Believe a computer setting was inadvertently reset. What setting and how do I reset?

Without your printer model numbers, readers can only give you vague general directions.
System Preferences > Print&Fax > ...
... shows a list of all set-up printers.
If you are having serious problems, it makes sense to "Reset the Printing System" (which also removes all printer set-ups) and add back each printer. It only takes a few minutes.
Mac OS X 10.6 Help: Resetting the printing system

Printing text using jdk 1.4...only first character in string output

I have read way too many forum postings and still can't get simple ascii to come out my printer. Please don't point me to awt printing samples. I don't want the overhead/baggage of graphics contexts when they shouldn't be needed.
If I create a printer that's a file (set to generic/ascii), then after printing and giving a filename the file contents look ok. So, this seems to be a DocFlavor issue or something.
However when I try to print to a network printer (usb attached), I only get at best a single character on my page.
The following is tracing from my print method (shows text to be printed and doc flavors supported by printer):
PrinterImpl::print(text=hello world)
image/gif; class="[B"
image/gif; class="java.io.InputStream"
image/gif; class="java.net.URL"
image/jpeg; class="[B"
image/jpeg; class="java.io.InputStream"
image/jpeg; class="java.net.URL"
image/png; class="[B"
image/png; class="java.io.InputStream"
image/png; class="java.net.URL"
application/x-java-jvm-local-objectref; class="java.awt.print.Pageable"
application/x-java-jvm-local-objectref; class="java.awt.print.Printable"
application/octet-stream; class="[B"
application/octet-stream; class="java.net.URL"
application/octet-stream; class="java.io.InputStream"
It appears, that besides copious image printing support (why PNG and not TEXT?!?!?!?) I can print Printable's from the awt api, as well as byte arrays and input streams. I wish to not use the awt printing api.
I have tried all mentioned DocFlavors regarding BYTE_ARRAY.AUTOSENSE, etc. Nothing gives me more than a single character of output.
Any ideas? I'm getting a little burnt out on this problem.
Thanks.

I cannot comment on the 2 examples you referenced, because I don't have a Postscript printer, but your own example does not work, at least under Win2K, neither on a USB nor an ASCII printer, here is why (aside from the fact that it contains 2 or 3 formal errors).
I am trying desparately to print a simple ASCII file on a USB printer under Win2K since weeks and found 2 problems, but no solution so far.
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Java PrintServiceLookup.lookupPrintServices() returns nothing
=============================================================
I want to print a simple ASCII file on a USB printer under Win2K and found 2 problems. Here is the 1st one.
PrintServiceLookup.lookupPrintServices(<DocFlavor>, <AttributeSet>) returns nothing when I specify any AttributeSet:
PrintRequestAttributeSet aset = new HashPrintRequestAttributeSet();
I tried
aset.add(new Copies(1));
or
aset.add(MediaSizeName.ISO_A4);
I tried it with JDK 1.4.2 and with Java 6, same problem.
When I specify null for AttributeSet, I get as many services as I have printers specified in the Printers folder of the Control panel.
I have scanned quite a few contributions about this subject, and it looks like this problem has been around since years, but I haven't found a solution.
But there is a circumvention of the problem for a parallel printer (at least an HP Laserjet 4 Plus): forget lookupPrintServices, just use the default printer. It works. Here are the essential code lines to print a simple ASCII file in Win2K.
//String fileID = = args[0];
FileInputStream textStream = new FileInputStream(fileID);
PrintService defService = PrintServiceLookup.lookupDefaultPrintService();
DocFlavor myFormat = DocFlavor.INPUT_STREAM.AUTOSENSE;
PrintRequestAttributeSet aset = new HashPrintRequestAttributeSet();
aset.add(MediaSizeName.ISO_A4);
DocPrintJob job = defService.createPrintJob();
Doc myDoc = new SimpleDoc(textStream, myFormat, null);
try {
job.print(myDoc, aset);
} catch (PrintException pe) {
System.out.println(pe.toString());
++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Cannot print on a USB printer with Java PrintService
====================================================
I want to print a simple ASCII file on a USB printer under Win2K and
found 2 problems. Here is the 2nd one.
Even though
PrintServiceLookup.lookupPrintServices(<DocFlavor>, <AttributeSet>)
returns nothing when I specify any AttributeSet, I can still print on the default printer, which I get by
PrintService defServicedefService = PrintServiceLookup.lookupDefaultPrintService();
but only on a parallel printer (HP Laserjet 4 Plus), either directly attached or over the network. When I try the very same code on a locally USB-attached printer, the printer is obviously reacting, but nothing is printed.
In case of a Lexmark 730 (an ink printer), the driver even lies, it has printed 100%,
on a Samsung CLP-510 (a color laser) the ready light flashes twice, that's all.
The file to be printed has 5 lines and a "0C"X at the end in order to force a page eject at the end.
I tried it with JDK 1.4.2 and with Java 6, same problem.
I should mention that I can print that little file out of the editor Textpad without any problem.
Edited by: eSchobbert on Jan 30, 2008 7:26 AM
Sorry I forgot to mention, that this post refers to the pretty old post of MartinHilpert of May 22, 2003 2:45 AM

Standard text displayed correctly in print preview but not in print

Hi,
I have a script in which a standard text has to be printed in the output.
The standard text contains some german characters.
These characters are displayed correctly in print preview but not in print.
The text is maintained in 3 languages DE,EN and Russian.
The same text is being printed in some standard report. But that is displayed correctly both in print and print preview.
Please suggest something.
Regards,
Richa Aggarwal

Hi Richa,
Check this document from SAP: [help doc|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0652a95-5f0b-2a10-5aba-c085f8bbe6d6?QuickLink=index&overridelayout=true]
It indicates that you have to be sure to select "Unicode" fonts for your SAPScript form to ensure the proper printing of "Unicode" characters. If a character does not display then that means it does not exist in the font that you are using.
Regards,
Ryan Crosby

Will not print text from PDFs - all other print is fine - Using nitro reader - Win7- HP4255

Will not print text from PDFs - all other print is fine - Using nitro reader - Win7- HP4255

Mulga
Welcome to the HP Community Forum.
Have you tried asking your question on the Nitro-Reader Forum?
Nitro Reader Forum
If you would like to try using the Adobe Reader, you might find help here:
Manage Print Output with Print Preview
See the section on PDF files
Click the Kudos Thumbs-Up to show you appreciate the help.
Click Accept as Solution when the Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

Print & Fax output need advice

Hi all,
We are using a print output which is partner independant output.We dont assign any partner function for this.As of now only print medium is maintained in the processing routine.
My req is I want to use this output as print as well as fax output henceforth.The fax should go to Sold to party.The fax number is maintained in the sold to party master record.
I maintained fax meduim in the processing routine and have not maintained the partner function as this output is already a partner independant output.
After maintainig the condition record if the create the shipemnt docuemnt the system is not pulling the fax output.If I remove the indicator partner independant output and maintain the partner function for fax then the fax output is determined automatically in the shipment document.
Is there any way that with out partner fucntion I can pull the fax output automatically in the shipment docuemnt
REagdrs'
Mano

Hi
1 ) i understood your requirement but with out partner function it will not work any out put eaither print,or fax mail what ever. i am talking about standard sap.
2) custom dev we have to check with "ABABER"
i hope you have understood
Thanks

Not able to save report output in a text file and RTF file

I am using Oracle Developer6.0 . I am facing problem with reports. I am invoking reports from form using run_product.
1. I could not able to save the report in text file . Whenever i try to save the report output in a text file.It gives dump and application get closed.
2. In RTF format , it execute the query which i have given at the design time while creating a report . But while running i am passing query either through lexical parameter or passing value of where criteria user parameters. It display the output for the specified value. But when i save this report output in rtf file . It execute design time query and save that in a rtf file.
If any body is having any idea about it . Please let me ASAP . It is very urgent for me.
Thanks in advance

Try the following:
Do not generate the report to .rep file, but rename/copy the .rdf file to .rep file and execute it.

Grand Total Text is not printing in ALV

Hi all,
I am not able to print Grand Total text in my report
I am not doing subtotal, i am using only grand totals.
So i have used in the following way
WA_FIELDCAT-DO_SUM        = GC_X.
GS_LAYOUT-TOTALS_ONLY       = GC_X.
GS_LAYOUT-TOTALS_TEXT       = 'Totals'(049).
i am using using ALV GRID DISPLAY FM...its displaying the total amount, buts text is missing...
Can any one tell me what else i have to pass in the layout or fieldcatlog or FM

Hi AMR,
If you use REUSE_ALV_GRID_DISPLAY function module, i think Total text does not come .but if u use REUSE_ALV_LIST_DISPLAY function module Total text comes .
Check this sample program it let u know ..
"Types
TYPES:
      BEGIN OF t_pa0008,
        pernr TYPE pa0008-pernr,
        lga01 TYPE pa0008-lga01,
        bet01 TYPE pa0008-bet01,
      END OF t_pa0008.
"Work areas
DATA:
      w_pa0008 TYPE t_pa0008.
"Internal tables
DATA:
      i_pa0008 TYPE STANDARD TABLE OF t_pa0008.
PARAMETERS:
           list TYPE c RADIOBUTTON GROUP gr1,
           grid TYPE c RADIOBUTTON GROUP gr1.
" ALV Declarations
" Types Pools
TYPE-POOLS:
   slis.
" Types
TYPES:
   t_fieldcat         TYPE slis_fieldcat_alv,
   t_events           TYPE slis_alv_event,
   t_layout           TYPE slis_layout_alv,
   t_sort             TYPE slis_sortinfo_alv,
   t_keyinfo          TYPE slis_keyinfo_alv.
" Workareas
DATA:
   w_fieldcat         TYPE t_fieldcat,
   w_events           TYPE t_events,
   w_sort             TYPE t_sort,
   w_layout           TYPE t_layout,
   w_keyinfo          TYPE t_keyinfo.
" Internal Tables
DATA:
   i_fieldcat         TYPE STANDARD TABLE OF t_fieldcat,
   i_events           TYPE STANDARD TABLE OF t_events,
   i_sort             TYPE STANDARD TABLE OF t_sort.
START-OF-SELECTION.
PERFORM get_data.
END-OF-SELECTION.
PERFORM build_fieldcatalog.        "Fieldcatalog
PERFORM build_events.              "Events table
PERFORM buid_layout.               "Layout structure.
PERFORM build_sort_tab.            "To sort table and get subtotal
PERFORM display_data.
*&      Form get_data
FORM get_data.
DATA:l_0008 TYPE pa0008 OCCURS 0 WITH HEADER LINE.
SELECT pernr lga01 bet01
    FROM pa0008
    INTO CORRESPONDING FIELDS OF l_0008
    WHERE begda LE sy-datum
      AND endda GE sy-datum.
    w_pa0008-pernr = l_0008-pernr.
    w_pa0008-lga01 = l_0008-lga01.
    w_pa0008-bet01 = l_0008-bet01.
    APPEND w_pa0008 TO i_pa0008.
    CLEAR w_pa0008.
    w_pa0008-pernr = l_0008-pernr.
    w_pa0008-lga01 = l_0008-lga02.
    w_pa0008-bet01 = l_0008-bet02.
    APPEND w_pa0008 TO i_pa0008.
    CLEAR w_pa0008.
    w_pa0008-pernr = l_0008-pernr.
    w_pa0008-lga01 = l_0008-lga03.
    w_pa0008-bet01 = l_0008-bet03.
    APPEND w_pa0008 TO i_pa0008.
    CLEAR w_pa0008.
    w_pa0008-pernr = l_0008-pernr.
    w_pa0008-lga01 = l_0008-lga04.
    w_pa0008-bet01 = l_0008-bet04.
    APPEND w_pa0008 TO i_pa0008.
    CLEAR w_pa0008.
ENDSELECT.
ENDFORM.                    "get_data
*&      Form build_fieldcatalog
FORM build_fieldcatalog.
PERFORM build_fcat USING:
                "Field    Int.Table    Text
                 'PERNR' 'I_PA0008'   'PERNR', "Remove this if u dont want in the item table as well as it is there in the header table
                 'LGA01' 'I_PA0008'   'LGA01',
                 'BET01' 'I_PA0008'   'BET01'.
ENDFORM.                    "build_fieldcatalog
*&      Form build_events
*       text
FORM build_events.
CLEAR:
        w_events, i_events[].
w_events-name = 'TOP_OF_PAGE'.
w_events-form = 'TOP_OF_PAGE'.
APPEND w_events TO i_events.
CLEAR w_events.
ENDFORM.                    "build_events
*&      Form display_data
*       text
FORM display_data.
DATA:
        l_program TYPE sy-repid VALUE sy-repid,
        l_fm      TYPE RS38L_FNAM.
IF list = 'X'.
    l_fm = 'REUSE_ALV_LIST_DISPLAY'.
ELSEIF grid ='X'.
    l_fm = 'REUSE_ALV_GRID_DISPLAY'.
ENDIF.
CALL FUNCTION l_fm
    EXPORTING
      i_callback_program = l_program
      is_layout          = w_layout
      it_fieldcat        = i_fieldcat
      it_events          = i_events
      it_sort            = i_sort
    TABLES
      t_outtab           = i_pa0008.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    "display_data
*&      Form build_fcat
FORM build_fcat USING l_field l_tab l_text.
w_fieldcat-fieldname = l_field.
w_fieldcat-tabname   = l_tab.
w_fieldcat-seltext_m = l_text.
IF l_field = 'BET01'.
    w_fieldcat-do_sum = 'X'.
ENDIF.
APPEND w_fieldcat TO i_fieldcat.
CLEAR w_fieldcat.
ENDFORM.                    " build_fcat
*&      Form top_of_page
*       text
FORM top_of_page.
DATA :
i_header TYPE slis_t_listheader,
w_header LIKE LINE OF i_header.
DATA:l_date1 TYPE datum,
       l_date2 TYPE datum.
w_header-typ = 'S'.
w_header-info = sy-title.
APPEND w_header TO i_header.
CLEAR w_header.
w_header-typ = 'H'.
w_header-info = sy-repid.
APPEND w_header TO i_header.
CLEAR w_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
    EXPORTING
      it_list_commentary = i_header
      i_logo             = 'ENJOYSAP_LOGO'.
ENDFORM.                    "top_of_page
*&      Form BUILD_sort_tab
FORM build_sort_tab .
CLEAR :i_sort[],w_sort.
w_sort-spos      = 1.
w_sort-fieldname = 'PERNR'.
w_sort-tabname   = 'I_PA0008'. "header table
w_sort-up        = 'X'.
w_sort-subtot    = 'X'.
APPEND w_sort TO i_sort.
CLEAR w_sort.
ENDFORM.                    " BUILD_sort_tab
*&      Form buid_layout
FORM buid_layout .
w_layout-totals_text = 'Total'.
w_layout-subtotals_text = 'S.Total'.
ENDFORM.                    " buid_layout
Regards,
Venkat.O

Adobe files not printing text to HP Laserjet Pro CP1525nw via HP ePrint

Hi
I have two HP Laserjet Pro CP1525nw printers setup with HP ePrint. When this was first installed it worked. I can send attachments to both printers successfully. My issue is when I send a pdf with both text and images included the images print but the text does not. Some of the original text is underlined, the lines show up but the text that is underlined does not. I end up with a printed version with images in the correct locations and black lines running horizontally accross the page which is the underlining for the missing text. Can anyone assist with this.
I have tested this from multiple email addresses and recieve the same error. The adobe file prints fine to another printer.
This question was solved.
View Solution.

Are the PDF attachments being sent also crated with Adobe? IF the PDF attachments were not created through that program the ability for them to print cannot be guaranteed. What is the main email client that you are sending the attachment from?
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

So I have been creating a logo for my company and it came out great. The problem is, when I format it for PNG or when I want to use it on freshbooks or my webpage, the image becomes blurred and the text is not as clear. How do I fix this?

So I have been creating a logo for my company and it came out great. The problem is, when I format it for PNG or when I want to use it on fresh books or my webpage, the image becomes blurred and the text is not as clear. How do I fix this? Is it because the text get shrunk?

This is how it looks on adobe illustrator

Fax output logo printing text is not

Similar Messages

Maybe you are looking for