FAX Print and receive half page

we are experienced a problem with receiving fax, sometimes we receive half page, the fax call come from PRI to FAX connected to FXS port.
the following if for the incoming Fax calls
voice-port 0/0/0
station-id name FAX-001
station-id number 046993199
caller-id enable
dial-peer voice 2001 pots
destination-pattern 199
fax rate disable
port 0/0/0
Note : The problem was also with ATA 186 , I replaced it with FXS port but still the same.

Thanks steven;
I have one gateway only , it is connceted to the PSTN by the E1 controller here is the show controller e1 and the FXS ports connected to the same gateway.
'sh controller e1'
E1 0/3/0 is up.
Applique type is Channelized E1 - balanced
Cablelength is Unknown
    No alarms detected.
alarm-trigger is not set
Version info Firmware: 20071011, FPGA: 13, spm_count = 0
Framing is NO-CRC4, Line Code is HDB3, Clock Source is Line.
Data in current interval (271 seconds elapsed):
     0 Line Code Violations, 0 Path Code Violations
     68 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins
     68 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs
Total Data (last 24 hours)
     16330 Line Code Violations, 16 Path Code Violations,
     20848 Slip Secs, 2 Fr Loss Secs, 2 Line Err Secs, 0 Degraded Mins,
     20847 Errored Secs, 0 Bursty Err Secs, 3 Severely Err Secs, 2712 Unavail Secs
sh call history voice br | i lost
IP : rtt:ms pl:/ms lost://
IP 192.168.10.250:0 SRTP: off rtt:0ms pl:171795/0ms lost:0/1/0 delay:60/60/65ms g711ulaw TextRelay: off
IP 0.0.0.0:0 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g729r8 pre-ietf TextRelay: off
IP 0.0.0.0:0 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g729r8 pre-ietf TextRelay: off
IP 192.168.10.13:31652 SRTP: off rtt:0ms pl:69840/0ms lost:0/0/0 delay:60/60/65ms g711ulaw TextRelay: off
IP 192.168.10.36:26528 SRTP: off rtt:0ms pl:44640/0ms lost:0/1/0 delay:60/60/70ms g711ulaw TextRelay: off
IP 0.0.0.0:0 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g729r8 pre-ietf TextRelay: off
IP 0.0.0.0:0 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g729r8 pre-ietf TextRelay: off
IP 192.168.10.27:27628 SRTP: off rtt:0ms pl:37940/0ms lost:0/0/0 delay:60/60/65ms g711ulaw TextRelay: off
IP 0.0.0.0:0 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g729r8 pre-ietf TextRelay: off
IP 0.0.0.0:0 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g729r8 pre-ietf TextRelay: off
IP 192.168.10.30:24908 SRTP: off rtt:0ms pl:52395/0ms lost:0/1/0 delay:60/60/65ms g711ulaw TextRelay: off
sh call active voice br | i lost
IP : rtt:ms pl:/ms lost://
IP 192.168.10.13:28664 SRTP: off rtt:0ms pl:151925/0ms lost:0/1/0 delay:60/60/65ms g711ulaw TextRelay: off
IP 192.168.10.53:17166 SRTP: off rtt:0ms pl:45095/0ms lost:0/2/0 delay:65/60/70ms g711ulaw TextRelay: off
IP 0.0.0.0:0 SRTP: off rtt:0ms pl:0/0ms lost:0/0/0 delay:0/0/0ms g729r8 pre-ietf TextRelay: off
I already attached the configuration file.
Thanks a again

Similar Messages

I have an all in one with wifi. It will only print one or one and a half pages

My printer will only print one or one and a half pages at a time.

Hi , Welcome to the HP Forums! I noticed that your HP Envy 4500 printer will only print one or one and a half pages, on Windows 8.1. I am happy to look into this printing issue for you! Some questions for you: What happens when you try print multiple copies? Copying Documents.Do you see any error messages on the front panel of the printer when it stops printing? Does the paper get stuck inside the printer? What happens if you print from NotePad?
In the meantime, please try the HP Print and Scan Doctor, and let me know what happens! Hope to hear from you soon! “Please click the Thumbs up icon below to thank me for responding.”

Hp Officejet Pro 8500 Q910a looks like it is printing and copying but pages come out blank.

Hp Officejet Pro 8500 Q910a looks like it is printing and copying but pages come out blank. I have used genuine HP cartridges. All four cartridges have have over 40% ink levels as per Self Test Diagnostic page.Printhead diagnostic says the print heads are "GOOD". Scanner works fine. Self Test Diagnostic Page prints in PINK color.Print quality TEST does not have black print on page.Printing and phot copying all come out blank.HELP.

Hi Equi_nut,
Do you have the same printer as the user above?

I have a wireless printer and received a new hard drive on laptop. How do I reset the scanning

I have a wireless printer and received a new hard drive on laptop. How do I reset the scanning

Macdi2000 wrote:
How do I reset the scanning
I have no idea what your question means; can you clarify?
Also, what Adobe software do you use?

I have a new hp 2050 printer and received a 10.0000 supply memory error message. what does this mean

I have a new hp 2050 printer and received a 10.0000 supply memory error message. Can anyone tell me what this means and how to fix it?

mickeymackey, this error looks similar to a related error code that I found for laserjets. Here is a summation of that error code:
http://goo.gl/W7dP6
This describes the problem as being a cartridge error, in which case I would follow the instructions in this document and see if that resolves the issue:
http://goo.gl/h6hWz
that does not resolve the issue, then I would recommend performing a hard reset of the printer. This would involve unplugging the printer for thirty seconds from both the back of the unit as well as from the outlet it is plugged into and then plugging the machine back in and powering it on.
A few additional questions are: Is this printer plugged into a surge protector, wall outlet or battery backup? The ink you are using, are they original HP cartriges or have they been refilled before?
Let me know!

Iwould like to fax documents and receive on my Imac

Iwould like to fax documents and receive on my Imac. On my earlier Imac, had program called Pagesender, and worked great. It no longer is supported, and does not work on V 10.7.5. Would love to go back to old ways it was great for me

There are many Internet Fax services available, do a search and compare them, any can be used with your iMac.

Hp photosmart 6510 printing and photocopying blank pages even after putting in new ink cardridges

Hi there, can anyone help?
My photosmart 6510 has recently started printing and photocopying blank pages. The ink cardridges were low and I have replaced them with new ones. I have cleaned the printer head and the test comes out in colour.
I have no idea what to do other than buy a new one !
Any advice appreciated.

Hi @TG13,
I'd like to help. Please begin with the steps in the following document; Printer Prints a Blank Page or Does Not Print Black or Color Ink for the HP Deskjet Ink Advantage an... < this applies to the 6510, and 6515 too.
If you complete, or have already completed all of the steps in the document above and the issue continues, my own personal recommendation, not one of HPs, is to use the solution offered in the following video. I only suggest doing this if the printer is out of warranty; How to fix a HP Printer, not printing black ink and missing colours
Based on the comments, it looks like this will help
King_Zog wrote:
I tried most of the suggestions in this thread, but stopped short of disassembling the print head. Nothing worked until I saw the video referenced in Sunshyn2005's message. That did work, but not on my first try. For the second attempt, I left the wet paper towels in place for a couple of hours to really soak the print heads. That did the trick.
So, thank you Sunshyn2005, for pointing me to the solution. - Source
Although the printer might be out of warranty, if the issue persists, HP may be able to offer you something. Maybe they can offer you a discount on an alternate model. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
If this resolves the issue, please let me know so we can help others who may be experiencing the same issue.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Print Report on half page

hello,
I am using report builder 6i. I want print on half page but the printer LQ-300+ uses full page. i want to print two receipts from one pages.
Thanks
iftikhar

Make sure your frames are set up to handle that kind of printing. Check to make sure that 2 repeating frames will fit into one page. There are properties on the repeating frames and regular frames that can affect this, like "Page Protect", "Page Break Before/After","Maximum Records per Page" or "Space Between Frames" (these are just some). You also might want to check the height and width of you section. You can increase the height until you see 2 show up, that tells you your repeating frame is too big for 2 records for your original height.

Scanner in use error message. Print and scan doctor page not found

I have an officejet pro 8500a which is giving an error message: scanner in use. it frequently does this and I reboot computer, turn off router and prnter and then turn all back on again and it usually works. This time it won't. I was directed to download the print and scan doctor but whether I enter the address in the url or click on the link I am directed to a page saying that it is not found. What else can I do besides throw this through the window?

Hello @trishdg and welcome to the HP Forums!
Which operating system is on the computer you use the printer with?
If you make a Copy (as that uses the scanner) do you get any errors that indicate the scanner is in use then?
This Print and Scan Doctor link will start the download for you right away (meaning it doesn't take you to a page, that link starts the download as soon as you click on it ) so you won't feel the need to through anything out the window
Let me know how those steps go, and we will go from there!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Keep user from printing and seeing certain pages

Here's the scenerio:
The form has 4 pages. I only want the user to see and know about page 1.
I need to batch print from the other 3 pages, each page in a seperate batch
Here's what I tried and the resulting issue:
1. Format pages 2,3,4 as visible print only
     a. the user can tell there are 3 other pages -they show up blank
     b. the user can see them if they decide to print
2. Format pages 2,3,4 as visible print only and restrict printing for the user
     a. I can't print without opening each one with a password - doesn't work well with batch-by-page printing
3. Format pages 2,3,4 as hidden - the user can't tell or see the other 3 pages but:
     a. I can't print the pages
3. Format pages 2,3,4 as hidden and have the form submitted as xml and import them into the full PDF
     a. there are fields that are dyamically changed based on user selection (ie. font selection), so the xml import doesn't work for that
Any ideas on how to "get my cake and eat it too"

Hi,
You could try a hidden field which looks for the user's "name".
There are security issues and the script has to be in a trusted function. You can do this be placing a Javascript file inside the Acrobat folder. The trouble generally with trusted fuctions is that you have to send each user a copy of the js file and they have to also put it in the correct folder.
In your case this is not a problem, because you only want the js file on your computer and do not need to distribute it to others.
When you put this file (uploaded) in Acrobat / Javascript folder, Acrobat will automatically load it.
In Acrobat make sure you have set a "Name" in Edit / Preferences / Identity tab:
When you open the PDF, your user name will be in the field. This will only happen if the js file is loaded in the correct folder of the computer you are using.
Once that is working, it is a simple step to include an if statement in the textfield, after the script that is in the initialize event:
if (this.rawValue == "lfalke") // or whatever your user name is set to...
     page2.presence = "visible";
     page3.presence = "visible";
     page4.presence = "visible";
else
     page2.presence = "hidden";
     page3.presence = "hidden";
     page4.presence = "hidden";
This would mean that the visibility of the three pages would be automatic. User with the js file AND your user name could see pages 2-4, everyone else would not see these pages.
I know it is a bit convoluted, but once set up it should continue to work OK.
Hope that helps,
Niall

No longer able to print 5x7 on half page..and/ File shrink?

Hi,
I'd like to print a 5x7 sized photo/file on letter-sized (8.5x11) photo paper to use only half of the sheet.
I used to do this all the time in my old PSE2 program (I've only recently updated from 2 to PSE9). From that older print dialog box, in the little preview pane I was able to move the photo up/down/side-to-side (wherever I wished) and in the final print-out it would be prescisely where I placed it , saving space on the paper for a second print. Apparently this is no longer possible in the newer versions...? In PSE9 my print keeps coming out half printed, no matter what I ticked (landscape/port) or how I placed it.
Question: Is this no longer possible to do in the newer versions?
I tried working around this by creating a new file in the PSE9 editor and moving the orig 5x7 file into that one--via select-all>edit>copy and then pasting the 5x7 into the newly created 8.5x11 file...however the 5x7 did not retain its dimensions when placed into the 8.5x11 space. Maybe I could "resize" the layer? (if that possible?)
Question: What is causing the orig 5x7 to shrink to 4x5.6 when copied to the new file?
Thanks much for any enlighting
~Suzanne
HP Pavilion dv7/ Notebook PC/ RAM-6.00 GB/ 174 GB free space
Windows 7/ PSE-9/camera-Sony Cybershot-HX1

Click on Extensions, Appearance or Plugins in the left margin of the Add-ons Manager display/tab.
*It is trying to load the "Get Add-ons" information from the web server
*There is possibly a minor glitch in loading the "Get Add-ons" option, but it is so minor that the developers have discussed and decided that no update for that minor item will be done, at this time
*If you want new add-ons, go to the following link and use the search box on the page: https://addons.mozilla.org/en-US/firefox/
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

I am trying to print and only blank pages and codes are printing?

My family have recently got a FujiXerox DocumentCentre C240 and I am trying to print to it. I have downloaded the printer software and added the printer through the IP address with selecting the right printer software. The printer says it is installed corrected and when I go to print it starts printing pages with a codes of what I'm trying to print at the top as well as lots of blank pages after.
What can I do to make this work and print what I want it to print?

Contact FujiXerox

Double page spread - but only using 1 and a half pages

Hi there smart people who use Aperture.
I'd like to create a double page spread in an Aperture book where the image only goes half way across the second page. Is this possible? I can't seem to enlarge an image so it crosses onto the second page, and I can't seem to reduce the size of an image that's inserted into a double page spread. Hope that makes sense and someone can help.
Thanks,
gtmonkey

Hi again RB - thanks again for helping.
I can't seem to open your page today, but I was able to see it last night and confirm that you can do what I'm trying to do.....lucky guy!
I'm still using Aperture 2.1 - maybe that's why I can't resize those pages?
However, I have discovered that if I drop a new image frame over the old one on the double page spread, I can play with that as much as I want. I can then delete the old image frame (the one that wouldn't resize) and get the result I want. That should do the trick.
Thanks again for your help though....
GT

Tried to setup ePrint on printer and received Register Error, Please Upgrade Product

I was trying to setup the ePrint web service on a HP Photosmart Plus e-All-in-One B210a and whenever i tried to set it up on the printer I would receive "Register Error - Please upgrade product". I would also try to get the printer to update through the web interface and I wasn't having any luck. I'm wondering what I can do to get the printer to either update itself and get the ePrint enabled or if I can do it from the HP website?
Thank You,
Trevor Bensen

I hope you are doing well and sorry to learn you are having this issue
Can you share what is the complete printer model as well as this;
Operating System (including service pack revision)
Connection Method - USB, Hardwired LAN, Wireless?
Error messages - on printer screen and/or computer, any blinking light patterns.
I will do my best to help you;
Regards;
RobertoR
And remember . . .
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

Trying to connect my printer and receive the message wireless radio is not functioning but the radio

i have a hp officejet pro 8500 wireless

Where are you receiving this message?
Run a wireless test by going to Setup>Network>Wireless Network Test. Does it show anything as failed? If so, what items are marked as failed?
What brand and model is the router?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

FAX Print and receive half page

Similar Messages

Maybe you are looking for