Fax Problems using Pri-T1 on VG-224 Gateway
Hello Everyone,
I'am having a problem with faxing out... I can fax to some numbers just fine and others I can't.. Does anyone know what could be causing this? I'am using T.38 fax relay in my Call Manager programming...
Have you verified the CSS assigned to the VG224? Also have you attempted calling the FAX numbers in question, to make sure that the issue isn't on their end.
HTH
Regards,
Yosh
Similar Messages
-
Problem while updating Tel no and Fax no using BAPI_BUPA_ADDRESS_CHANGE
Hi,
Im trying to update the Telephone number and Fax number using a BAPI but unable to update in Tcode BP .can you please tell teh solution.my code is below.
data : i_tel like BAPIADTEL occurs 0 with header line,
i_fax like BAPIADFAX occurs 0 with header line,
i_telx like BAPIADTELX occurs 0 with header line,
i_faxx like BAPIADFAXX occurs 0 with header line.
i_tel-telephone = '800-266-3377'.
append i_tel.
i_fax-fax = '505-796-9601'.
append i_fax.
i_telx-telephone = 'X'.
append i_telx.
i_faxx-fax = 'X'.
append i_faxx.
To add Telephone number and FAX number
CALL FUNCTION 'BAPI_BUPA_ADDRESS_CHANGE'
EXPORTING
businesspartner = '0007000006'
TABLES
BAPIADTEL = i_tel[]
BAPIADFAX = i_fax[]
BAPIADTEL_X = i_telx[]
BAPIADFAX_X = i_faxx[].
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
if sy-subrc =0.
write:/5 'Successfully updated'.
endif.
Regards,
Deepthi.DATA : i_tel LIKE bapiadtel OCCURS 0 WITH HEADER LINE,
i_fax LIKE bapiadfax OCCURS 0 WITH HEADER LINE,
i_telx LIKE bapiadtelx OCCURS 0 WITH HEADER LINE,
i_faxx LIKE bapiadfaxx OCCURS 0 WITH HEADER LINE,
i_return LIKE bapiret2 OCCURS 0 with header line.
i_tel-telephone = '800-266-3356'.
APPEND i_tel.
i_fax-fax = '505-796-9656'.
APPEND i_fax.
i_telx-telephone = 'X'.
i_telx-updateflag = 'I'.
APPEND i_telx.
i_faxx-fax = 'X'.
i_faxx-updateflag = 'I'.
APPEND i_faxx.
To add Telephone number and FAX number
CALL FUNCTION 'BAPI_BUPA_ADDRESS_CHANGE'
EXPORTING
businesspartner = '0007000006'
TABLES
bapiadtel = i_tel[]
bapiadfax = i_fax[]
bapiadtel_x = i_telx[]
bapiadfax_x = i_faxx[]
return = i_return.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
IF sy-subrc = 0.
WRITE:/5 'Successfully updated'.
ENDIF.
data:v_msg(255) type c.
loop at i_return.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
ID = i_return-id
LANG = 'EN'
NO = i_return-number
V1 = i_return-message
IMPORTING
MSG = v_msg
EXCEPTIONS
NOT_FOUND = 1
OTHERS = 2 .
write:/5 v_msg.
endloop. -
Fax Problem on HP laserjet 200 color MFP M276nw
HP Laser Jet 200 color MFP M276nw
fax problem
I continue to get fax confirmation pages even though the message is "no fax detected" and "0" page. I get several of these a day with no accompanying fax on my HP200 Color MFP
Has anyone had this problem?Hi @ColtraneII,
I understand you are getting fax confirmation pages printing serveral times a day with the message "no fax detected".
I can help you with this issue today.
Check these settings for the fax:
Go to the wrench icon/fax setup menu/advanced setup/private receive/turn it off.
Go to the wrench icon/service /fax service/error correction/turn it off.
Go to the wrench icon/fax setup /advanced setup/fax speed/change it to medium.
Go to wrench icon/service menu/fax service/clear saved faxes.
If you are still having issues, then follow this document for checking the connections and settings for the fax.
Cannot Send or Receive Faxes.
Sorry for all the questions, but it will help to resolve this issue quicker.
What were the results of the fax test?
Are you able to send or receive faxes?
What type of connection do you have? (Analogue, DSL, Cable Modem)
Are you using the 2 wire fax cable?
Do you have distinctive ring set up on the line?
Is there any voice mail set up?
Do you have a answering machine? (Where is it connected to?)
Where is the fax cable connected to? (modem, wall jack)
Is there a phone also connected the printer?
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP -
HELP! Problem using HPSCAN.exe or TWAIN driver for HP Laserjet Pro cm1415fnw using Windows 7
I have been using the HP Laserjet Pro cm1415fnw for over a year without a problem. At the time when I first purchased the unit, I was using a Dell desktop with Windows XP and connected the printer via USB port. I was able to print and scan from my computer, including from within applications that use TWAIN scanning driver such as Word, Acrobat, etc.
I have since upgraded to an HP slimline s5-1160 computer using Windows 7. I installed the Laserjet software from my installation CD's without a problem. The printer is connected to the computer by USB port. I can continue to print without a problem. However, I no longer am able to scan using the HP software (HPscan.exe) nor from within applications that use TWAIN scanning driver such as Word, Acrobat, etc. When I attempt to do so, it takes a long time before it asks me what TWAIN scan driver to select. When I select the HP cm1410 MFP series, the program either crashes or reverts to the state it was before I attempted to scan an image into a document from within the program.
I can however scan successfully using the Windows Scan and Fax wizard or if I choose "Devices and Printers" from the Start Menu and select "Start scan" from the menu after right-clicking the HP printer icon. However this option limits my use of the scanner -- I cannot scan to a PDF nor can I scan multiple pages into an OCR application. I'm forced to scan to either a JPG or TIF or PNG.
As for attempting to resolve this problem I have done the following with no success:
Uninstall and reinstall the full software and drivers (and using the most recent version on the HP website)
Change USB ports and/or cables
Run the HP scan diagnostic utility, which seems to show an error at the WIA scanning step and then recommends that I uuninstall and reinstall the full software. When I skip that and allow it to check for TWAIN scanning, it gives me a similar error, suggesting that I use the most recent version of the drivers (the driver that I am using is v 3.0 dated 11/12/2009) Therefore in this case the HP scan diagnostic utility does NOT provide a fix for this problem other than uninstall and reinstall, which I have done several times to no avail
Contact HP support both for the computer and the multifunction printer (which as I understand are different support staff). The printer staff claims it's a software problem and that the computer staff should be able to resolve it (something about not having "launchpad" installed properly. When I contact the computer staff, they claim it's a printer driver issue. So I am at a standstill
I researched the HP support forums only to find from this link - http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02661093&cc=us&dlc=en&lc=en&product=4089468&tmp... - that if you cannot scan from HP software that you can use the programs that rely on WIA drivers (Windows Fax and Scan) which I already know I can do but implies that HP does NOT have a solution for how to scan using their own software!
My gut tells me that this is one of those problems that many others may have but for which there is no workable solution. It's possible that during the course of uninstalling and reinstalling the software, remnants may remain behind that prevent proper functioning of the drivers, but without knowing how to specifically "clean" those remnants before reinstalling the software, I am at a loss. Oh and by the way, I've also tried using CCleaner and Norton Registry Cleaner in an attempt to clean those remnants, but that effort didn't help.
My question is basically this... does anyone know of a fix around this problem or must I resign myself to using the Windows Fax and Scan wizard to scan in documents and images and forget about using TWAIN programs as HP seems to be suggesting? I would think that given that I am using an HP printer/scanner along with an HP computer with Windows 7 that this problem should NOT be a problem!
This question was solved.
View Solution.Before attempting to install the printer on my computer (HP slimline s5-1160), I had been able to successfully install the printer previously on two other computers: a Lenovo T-410 laptop (work computer using Windows XP) and an HP Pavilion Elite HPE (wife's computer using Windows 7).
On those computers, I can use the TWAIN driver from within applications without a problem, and the HPSCAN.exe file works as well. Both computers connect to the printer wirelessly.
It is while trying to install the printer on my home computer via USB that I am having all sorts of difficulty. I have also tried to connect my s5-1160 to the printer wirelessly from my computer. I also checked the Windows Services, and all seems fine there. I also tried switching USB ports and cables. Again, no luck with the scanning using TWAIN driver.
One other point: when I use the original installation CD that came with the printer to install on the s5-1160, the installation seems to stop when it says "Checking requirements for installation" That didn't happen with the two other computers. However, that problem doesn't happen the s5-1160 when I used the more recent version of the full software from the HP website.
Let me reiterate. I have never had any problems with printing from any computer. The scanner works fine from my s5-1160 if I resort to using the scanner and fax wizard using the WIA drivers. What I am unable to do is to get the scanner to work from within an application using the TWAIN driver or if I use the native HP application (hpscan.exe). Nothing seems to happen. Because of that I cannot scan directly into a PDF.
And the only fix that the HP scan diagnostic utility continues to recommend is that I uninstall and reinstall the software. It shows errors in the WIA scanning step and TWAIN step.
Is it possible that because of behind-the-scenes Windows updates that my s5-1160 is receiving that a software conflict is created that prevents the TWAIN driver from functioning properly? Other than that I am at a loss to figure out why this is happening. -
Problem using existsnode from view
I am having a problem using existsnode from a view. I am currently using 10.2.0.3
example
CREATE OR REPLACE VIEW XML_PERSON_ASSOCIATION
(PERSON)
AS
select
xmlelement("Person",
xmlforest(
extractvalue(value(p),'/Person/PersonID') "PersonID",
extractvalue(value(p),'/Person/Prefix') "Prefix",
extractvalue(value(p),'/Person/FirstName') "FirstName",
extractvalue(value(p),'/Person/MiddleName') "MiddleName",
extractvalue(value(p),'/Person/LastName') "LastName",
extractvalue(value(p),'/Person/Suffix') "Suffix",
extractvalue(value(p),'/Person/PreferredName') "PreferredName",
extractvalue(value(p),'/Person/Gender') "Gender",
extractvalue(value(p),'/Person/PrimaryLanguage') "PrimaryLanguage",
extractvalue(value(p),'/Person/RecordStatus') "RecordStatus",
extractvalue(value(p),'/Person/ImportedDate') "ImportedDate",
(select
xmlagg(
xmlelement("Association",
xmlforest(
extractvalue(value(oa),'/OrganizationPersonAssoc/Name') "Name",
extractvalue(value(ot),'/OrganizationType/OrganizationID') "OrganizationID",
extractvalue(value(ot),'/OrganizationType/Type') "OrganizationType",
extractvalue(value(a),'/Association/Role') "Role",
extractvalue(value(a),'/Association/RecordStatus') "RecordStatus",
extractvalue(value(oa),'/OrganizationPersonAssoc/ImportedDate') "ImportedDate"
xmlelement("PersonTypes",
extract(value(per),'/Person/PersonTypes/PersonType')
xmlelement("Addresses",
extract(value(a),'/Association/Addresses/Address')
xmlelement("ContactMechanisms",
extract(value(a),'/Association/ContactMechanisms/ContactMechanism')
from org_person_assoc oa,
table(xmlsequence(extract(value(oa),'/OrganizationPersonAssoc/OrganizationTypes/OrganizationType'))) ot,
table(xmlsequence(extract(value(ot),'/OrganizationType/Associations/Association'))) a,
table(xmlsequence(extract(value(a),'/Association/Persons/Person'))) per
where extractvalue(value(per),'/Person/PersonID') = extractvalue(value(p),'/Person/PersonID')
) "Associations"
) person
from person p
/When I run the following statment
select person
from xml_person_association o
where existsnode(person,'/Person/Associations/Association[OrganizationID=30097]')=1;
I get no records returned. Now if I used the extract function and use the same path that's in the existsnode clause I get a record returned.
select extract(person,'/Person/Associations/Association')
from xml_person_association o
where existsnode(person,'/Person/Associations/Association[OrganizationID=30097]')=1;
<Association>
<Name>TEST DATA</Name>
<OrganizationID>30097</OrganizationID>
</Association>
If I run the same style of existsnode statment against a table directly instead of a view I am not required to use an extract caluse that has the same path that is used in the existsnode clause.
Thanks for the help.
Message was edited by:
mdrakeTesting in 11g I get
SQL>
SQL>
SQL> set echo on
SQL> spool testcase.log
SQL> --
SQL> connect sys/ as sysdba
Enter password:
Connected.
SQL> set define on
SQL> set timing on
SQL> --
SQL> define USERNAME = XDBTEST
SQL> --
SQL> def PASSWORD = XDBTEST
SQL> --
SQL> def USER_TABLESPACE = USERS
SQL> --
SQL> def TEMP_TABLESPACE = TEMP
SQL> --
SQL> drop user &USERNAME cascade
2 /
old 1: drop user &USERNAME cascade
new 1: drop user XDBTEST cascade
User dropped.
Elapsed: 00:00:09.42
SQL> grant connect, resource to &USERNAME identified by &PASSWORD
2 /
old 1: grant connect, resource to &USERNAME identified by &PASSWORD
new 1: grant connect, resource to XDBTEST identified by XDBTEST
Grant succeeded.
Elapsed: 00:00:00.03
SQL> grant create any directory, drop any directory to &USERNAME
2 /
old 1: grant create any directory, drop any directory to &USERNAME
new 1: grant create any directory, drop any directory to XDBTEST
Grant succeeded.
Elapsed: 00:00:00.00
SQL> grant alter session, create view to &USERNAME
2 /
old 1: grant alter session, create view to &USERNAME
new 1: grant alter session, create view to XDBTEST
Grant succeeded.
Elapsed: 00:00:00.00
SQL> alter user &USERNAME default tablespace &USER_TABLESPACE temporary tablespace &TEMP_TABLESPACE
2 /
old 1: alter user &USERNAME default tablespace &USER_TABLESPACE temporary tablespace &TEMP_TABLESPACE
new 1: alter user XDBTEST default tablespace USERS temporary tablespace TEMP
User altered.
Elapsed: 00:00:00.00
SQL> connect &USERNAME/&PASSWORD
Connected.
SQL> --
SQL> alter session set events ='19027 trace name context forever, level 0x800'
2 /
Session altered.
Elapsed: 00:00:00.00
SQL> var xmlText1 clob
SQL> var xmlText2 clob
SQL> var xmlSchema clob
SQL> var schemaURL varchar2(256)
SQL> --
SQL> begin
2 :schemaURL := 'mcs.xsd';
3 :xmlSchema :=
4 '<!-- edited with XMLSpy v2007 sp2 (http://www.altova.com) by Shaun (PPD Inc) --> <s:schema xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:xdb=
"http://xmlns.oracle.com/xdb" elementFormDefault="qualified" xdb:storeVarrayAsTable="true">
5 <s:element name="Organization" type="Organization" xdb:defaultTable="ORG"/>
6 <s:element name="Person" type="Person" xdb:defaultTable="PERSON"/>
7 <s:element name="OrganizationPersonAssoc" type="Organization" xdb:defaultTable="ORG_PERSON_ASSOC"/>
8 <s:complexType name="Organization" xdb:SQLType="Organization">
9 <s:sequence minOccurs="0">
10 <s:element name="Name" type="s:string" nillable="true"/>
11 <s:element name="LongName" type="s:string" nillable="true"/>
12 <s:element name="Description" type="s:string" nillable="true"/>
13 <s:element name="FWANumber" type="s:string" nillable="true"/>
14 <s:element name="GUID" type="s:string" nillable="true"/>
15 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
16 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
17 <s:element name="RecordStatus" type="s:string" nillable="true"/>
18 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
19 <s:element name="OrganizationTypes" type="ArrayOfOrganizationType" minOccurs="0"/>
20 <s:element name="OrganizationSynonyms" type="ArrayOfOrganizationSynonym"/>
21 <s:element name="ImportedDate" type="s:date"/>
22 </s:sequence>
23 </s:complexType>
24 <s:complexType name="ArrayOfOrganizationType" xdb:SQLType="ArrayOfOrganizationType">
25 <s:sequence minOccurs="0">
26 <s:element name="OrganizationType" type="OrganizationType" minOccurs="0" maxOccurs="unbounded"/>
27 </s:sequence>
28 </s:complexType>
29 <s:complexType name="OrganizationType" xdb:SQLType="OrganizationType">
30 <s:sequence minOccurs="0">
31 <s:element name="OrganizationID" type="s:string"/>
32 <s:element name="Type" type="s:string" nillable="true"/>
33 <s:element name="QCDoneStatus" type="s:string" nillable="true"/>
34 <s:element name="QCDoneStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
35 <s:element name="SiteEstablishmentStatus" type="s:string" nillable="true"/>
36 <s:element name="SiteEstablishmentStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
37 <s:element name="IPFNumber" type="s:int"/>
38 <s:element name="DUNSNumber" type="s:int"/>
39 <s:element name="GUID" type="s:string" nillable="true"/>
40 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
41 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
42 <s:element name="RecordStatus" type="s:string" nillable="true"/>
43 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
44 <s:element name="LegacyCodes" type="ArrayOfLegacyCode" minOccurs="0"/>
45 <s:element name="Addresses" type="ArrayOfAddress" minOccurs="0"/>
46 <s:element name="ContactMechanisms" type="ArrayOfContactMechanism" minOccurs="0"/>
47 <s:element name="Associations" type="ArrayOfAssociation" minOccurs="0"/>
48 </s:sequence>
49 </s:complexType>
50 <s:complexType name="ArrayOfLegacyCode" xdb:SQLType="ArrayOfLegacyCode">
51 <s:sequence minOccurs="0">
52 <s:element name="LegacyCode" type="LegacyCode" minOccurs="0" maxOccurs="unbounded"/>
53 </s:sequence>
54 </s:complexType>
55 <s:complexType name="LegacyCode" xdb:SQLType="LegacyCode">
56 <s:sequence minOccurs="0">
57 <s:element name="Code" type="s:string" nillable="true"/>
58 <s:element name="NetworkID" type="s:string"/>
59 <s:element name="GUID" type="s:string" nillable="true"/>
60 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
61 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
62 <s:element name="RecordStatus" type="s:string" nillable="true"/>
63 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
64 </s:sequence>
65 </s:complexType>
66 <s:complexType name="ArrayOfAddress" xdb:SQLType="ArrayOfAddress">
67 <s:sequence minOccurs="0">
68 <s:element name="Address" type="Address" minOccurs="0" maxOccurs="unbounded"/>
69 </s:sequence>
70 </s:complexType>
71 <s:complexType name="Address" xdb:SQLType="Address">
72 <s:sequence minOccurs="0">
73 <s:element name="StreetName1" type="s:string" nillable="true"/>
74 <s:element name="StreetName2" type="s:string" nillable="true"/>
75 <s:element name="StreetName3" type="s:string" nillable="true"/>
76 <s:element name="StreetName4" type="s:string" nillable="true"/>
77 <s:element name="CityName" type="s:string" nillable="true"/>
78 <s:element name="CityGUID" type="s:string" nillable="true"/>
79 <s:element name="CityCreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
80 <s:element name="CityLastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
81 <s:element name="CityRecordStatus" type="s:string" nillable="true"/>
82 <s:element name="CityRecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
83 <s:element name="StateName" type="s:string" nillable="true"/>
84 <s:element name="StateGUID" type="s:string" nillable="true"/>
85 <s:element name="StateCreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
86 <s:element name="StateLastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
87 <s:element name="StateRecordStatus" type="s:string" nillable="true"/>
88 <s:element name="StateRecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
89 <s:element name="CountryName" type="s:string" nillable="true"/>
90 <s:element name="CountryCode" type="s:string" nillable="true"/>
91 <s:element name="CountryGUID" type="s:string" nillable="true"/>
92 <s:element name="CountryCreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
93 <s:element name="CountryLastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
94 <s:element name="CountryRecordStatus" type="s:string" nillable="true"/>
95 <s:element name="CountryRecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
96 <s:element name="ZipPostalCode" type="s:string" nillable="true"/>
97 <s:element name="GUID" type="s:string" nillable="true"/>
98 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
99 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
100 <s:element name="RecordStatus" type="s:string" nillable="true"/>
101 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
102 <s:element name="Type" type="s:string" nillable="true"/>
103 <s:element name="TypeOtherSpecify" type="s:string" nillable="true"/>
104 <s:element name="InternalOffice" type="s:string" nillable="true"/>
105 <s:element name="MailStopCode" type="s:string" nillable="true"/>
106 <s:element name="PreferredFlag" type="s:string" nillable="true"/>
107 <s:element name="ActiveFromDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
108 <s:element name="QCDoneStatus" type="s:string" nillable="true"/>
109 <s:element name="QCDoneStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
110 </s:sequence>
111 </s:complexType>
112 <s:complexType name="ArrayOfContactMechanism" xdb:SQLType="ArrayOfContactMechanism">
113 <s:sequence minOccurs="0">
114 <s:element name="ContactMechanism" type="ContactMechanism" minOccurs="0" maxOccurs="unbounded"/>
115 </s:sequence>
116 </s:complexType>
117 <s:complexType name="ContactMechanism" xdb:SQLType="ContactMechanism">
118 <s:sequence minOccurs="0">
119 <s:element name="ContactType" type="s:string" nillable="true"/>
120 <s:element name="ContactTypeOtherSpecify" type="s:string" nillable="true"/>
121 <s:element name="ContactValue" type="s:string" nillable="true"/>
122 <s:element name="ContactAreaCode" type="s:string" nillable="true"/>
123 <s:element name="ContactCountryCallingCode" type="s:int"/>
124 <s:element name="ContactTollFreeFlag" type="s:string" nillable="true"/>
125 <s:element name="ContactGUID" type="s:string" nillable="true"/>
126 <s:element name="ContactCreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
127 <s:element name="ContactLastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
128 <s:element name="ContactRecordStatus" type="s:string" nillable="true"/>
129 <s:element name="ContactRecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
130 <s:element name="Role" type="s:string" nillable="true"/>
131 <s:element name="PhoneExtension" type="s:string" nillable="true"/>
132 <s:element name="QCDoneStatus" type="s:string" nillable="true"/>
133 <s:element name="QCDoneStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
134 <s:element name="ActiveFromDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
135 <s:element name="GUID" type="s:string" nillable="true"/>
136 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
137 <s:element name="ModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
138 <s:element name="PreferredFlag" type="s:string" nillable="true"/>
139 <s:element name="RecordStatus" type="s:string" nillable="true"/>
140 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
141 </s:sequence>
142 </s:complexType>
143 <s:complexType name="ArrayOfAssociation" xdb:SQLType="ArrayOfAssociation">
144 <s:sequence minOccurs="0">
145 <s:element name="Association" type="Association" minOccurs="0" maxOccurs="unbounded"/>
146 </s:sequence>
147 </s:complexType>
148 <s:complexType name="Association" xdb:SQLType="Association">
149 <s:sequence minOccurs="0">
150 <s:element name="Role" type="s:string" nillable="true"/>
151 <s:element name="GUID" type="s:string" nillable="true"/>
152 <s:element name="QCDoneStatus" type="s:string" nillable="true"/>
153 <s:element name="QCDoneStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
154 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
155 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
156 <s:element name="RecordStatus" type="s:string" nillable="true"/>
157 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
158 <s:element name="Addresses" type="ArrayOfAddress" minOccurs="0"/>
159 <s:element name="ContactMechanisms" type="ArrayOfContactMechanism" minOccurs="0"/>
160 <s:element name="Persons" type="ArrayOfPerson" minOccurs="0"/>
161 </s:sequence>
162 </s:complexType>
163 <s:complexType name="ArrayOfPerson" xdb:SQLType="ArrayOfPerson">
164 <s:sequence minOccurs="0">
165 <s:element name="Person" type="Person" minOccurs="0" maxOccurs="unbounded"/>
166 </s:sequence>
167 </s:complexType>
168 <s:complexType name="Person" xdb:SQLType="Person">
169 <s:sequence minOccurs="0">
170 <s:element name="PersonID" type="s:int"/>
171 <s:element name="Prefix" type="s:string" nillable="true"/>
172 <s:element name="FirstName" type="s:string" nillable="true"/>
173 <s:element name="MiddleName" type="s:string" nillable="true"/>
174 <s:element name="LastName" type="s:string" nillable="true"/>
175 <s:element name="Suffix" type="s:string" nillable="true"/>
176 <s:element name="PreferredName" type="s:string" nillable="true"/>
177 <s:element name="Gender" type="s:string" nillable="true"/>
178 <s:element name="PrimaryLanguage" type="s:string" nillable="true"/>
179 <s:element name="GUID" type="s:string" nillable="true"/>
180 <s:element name="RecordStatus" type="s:string" nillable="true"/>
181 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
182 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
183 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
184 <s:element name="QCDoneStatus" type="s:string" nillable="true"/>
185 <s:element name="QCDoneStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
186 <s:element name="PersonDegrees" type="ArrayOfPersonDegree" minOccurs="0"/>
187 <s:element name="PersonSpecialties" type="ArrayOfPersonSpecialty" minOccurs="0"/>
188 <s:element name="PersonTypes" type="ArrayOfPersonType" minOccurs="0"/>
189 <s:element name="Addresses" type="ArrayOfAddress" minOccurs="0"/>
190 <s:element name="ContactMechanisms" type="ArrayOfContactMechanism" minOccurs="0"/>
191 <s:element name="ImportedDate" type="s:date"/>
192 </s:sequence>
193 </s:complexType>
194 <s:complexType name="ArrayOfPersonDegree" xdb:SQLType="ArrayOfPersonDegree">
195 <s:sequence minOccurs="0">
196 <s:element name="PersonDegree" type="PersonDegree" minOccurs="0" maxOccurs="unbounded"/>
197 </s:sequence>
198 </s:complexType>
199 <s:complexType name="PersonDegree" xdb:SQLType="PersonDegree">
200 <s:sequence minOccurs="0">
201 <s:element name="Code" type="s:string" nillable="true"/>
202 <s:element name="Major" type="s:string" nillable="true"/>
203 <s:element name="ListingOrder" type="s:int"/>
204 <s:element name="GUID" type="s:string" nillable="true"/>
205 <s:element name="RecordStatus" type="s:string" nillable="true"/>
206 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
207 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
208 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
209 </s:sequence>
210 </s:complexType>
211 <s:complexType name="ArrayOfPersonSpecialty" xdb:SQLType="ArrayOfPersonSpecialty">
212 <s:sequence minOccurs="0">
213 <s:element name="PersonSpecialty" type="PersonSpecialty" minOccurs="0" maxOccurs="unbounded"/>
214 </s:sequence>
215 </s:complexType>
216 <s:complexType name="PersonSpecialty" xdb:SQLType="PersonSpecialty">
217 <s:sequence minOccurs="0">
218 <s:element name="Name" type="s:string" nillable="true"/>
219 <s:element name="GUID" type="s:string" nillable="true"/>
220 <s:element name="RecordStatus" type="s:string" nillable="true"/>
221 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
222 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
223 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
224 </s:sequence>
225 </s:complexType>
226 <s:complexType name="ArrayOfPersonType" xdb:SQLType="ArrayOfPersonType">
227 <s:sequence minOccurs="0">
228 <s:element name="PersonType" type="PersonType" minOccurs="0" maxOccurs="unbounded"/>
229 </s:sequence>
230 </s:complexType>
231 <s:complexType name="PersonType" xdb:SQLType="PersonType">
232 <s:sequence minOccurs="0">
233 <s:element name="Type" type="s:string" nillable="true"/>
234 <s:element name="GUID" type="s:string" nillable="true"/>
235 <s:element name="RecordStatus" type="s:string" nillable="true"/>
236 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
237 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
238 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
239 <s:element name="QCDoneStatus" type="s:string" nillable="true"/>
240 <s:element name="QCDoneStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
241 </s:sequence>
242 </s:complexType>
243 <s:complexType name="ArrayOfOrganizationSynonym" xdb:SQLType="ArrayOfOrganizationSynonym">
244 <s:sequence minOccurs="0">
245 <s:element name="OrganizationSynonym" type="OrganizationSynonym" minOccurs="0" maxOccurs="unbounded"/>
246 </s:sequence>
247 </s:complexType>
248 <s:complexType name="OrganizationSynonym" xdb:SQLType="OrganizationSynonym">
249 <s:sequence minOccurs="0">
250 <s:element name="Name" type="s:string" nillable="true"/>
251 <s:element name="GUID" type="s:string" nillable="true"/>
252 <s:element name="CreatedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
253 <s:element name="LastModifiedDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
254 <s:element name="RecordStatus" type="s:string" nillable="true"/>
255 <s:element name="RecordStatusDate" type="s:dateTime" xdb:SQLType="TIMESTAMP(6) WITH TIME ZONE"/>
256 </s:sequence>
257 </s:complexType>
258 </s:schema>';
259 :xmltext1 :=
260 '<?xml version="1.0" encoding="WINDOWS-1252"?> <Person xsi:noNamespaceSchemaLocation="mcs.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns
:xsi="http://www.w3.org/2001/XMLSchema-instance">
261 <PersonID>100448</PersonID>
262 <Prefix/>
263 <FirstName>John</FirstName>
264 <MiddleName/>
265 <LastName>Doe</LastName>
266 <Suffix/>
267 <PreferredName/>
268 <Gender/>
269 <PrimaryLanguage xsi:nil="true"/>
270 <GUID>ffff-ffff-ffff</GUID>
271 <RecordStatus>Active</RecordStatus>
272 <RecordStatusDate>2007-04-29T00:11:50.750000-04:00</RecordStatusDate>
273 <CreatedDate>2006-06-13T00:57:21.090000-04:00</CreatedDate>
274 <LastModifiedDate>2007-04-29T00:11:50.770000-04:00</LastModifiedDate>
275 <QCDoneStatus>Yes</QCDoneStatus>
276 <QCDoneStatusDate>2006-06-13T00:57:22.977000-04:00</QCDoneStatusDate>
277 <PersonDegrees>
278 <PersonDegree>
279 <Code>B.S.</Code>
280 <Major xsi:nil="true"/>
281 <ListingOrder>1</ListingOrder>
282 <GUID>d01bbcfd-9d48-47bf-818d-9957b907a664</GUID>
283 <RecordStatus>Active</RecordStatus>
284 <RecordStatusDate>2006-10-05T10:48:04.430000-04:00</RecordStatusDate>
285 <CreatedDate>2006-10-05T10:48:06.520000-04:00</CreatedDate>
286 <LastModifiedDate>2006-10-05T10:48:06.520000-04:00</LastModifiedDate>
287 </PersonDegree>
288 </PersonDegrees>
289 <PersonSpecialties/>
290 <PersonTypes>
291 <PersonType>
292 <Type>Resource Personnel</Type>
293 <GUID>3049ddcd-3590-4fd9-a534-e2cea5b82c09</GUID>
294 <RecordStatus>Active</RecordStatus>
295 <RecordStatusDate>2006-06-13T00:57:22.977000-04:00</RecordStatusDate>
296 <CreatedDate>2006-06-13T00:57:21.090000-04:00</CreatedDate>
297 <LastModifiedDate>2007-04-29T00:11:50.817000-04:00</LastModifiedDate>
298 <QCDoneStatus>Yes</QCDoneStatus>
299 <QCDoneStatusDate>2006-06-13T00:57:22.977000-04:00</QCDoneStatusDate>
300 </PersonType>
301 </PersonTypes>
302 <Addresses/>
303 <ContactMechanisms/>
304 <ImportedDate>2007-04-30</ImportedDate>
305 </Person>';
306 :xmltext2 :=
307 '<?xml version="1.0" encoding="WINDOWS-1252"?> <OrganizationPersonAssoc xsi:noNamespaceSchemaLocation="mcs.xsd" xmlns:xsd="http://www.w3.org/2001
/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
308 <Name>Org Name Office</Name>
309 <LongName>Long Name</LongName>
310 <Description xsi:nil="true"/>
311 <FWANumber xsi:nil="true"/>
312 <GUID>dddd-dddd</GUID>
313 <CreatedDate>2006-05-18T18:59:01.500000-04:00</CreatedDate>
314 <LastModifiedDate>2006-05-18T18:59:01.500000-04:00</LastModifiedDate>
315 <RecordStatus>Active</RecordStatus>
316 <RecordStatusDate>2006-05-18T18:59:01.500000-04:00</RecordStatusDate>
317 <OrganizationTypes>
318 <OrganizationType>
319 <OrganizationID>30097</OrganizationID>
320 <Type>Agency</Type>
321 <QCDoneStatus>Yes</QCDoneStatus>
322 <QCDoneStatusDate>2006-05-18T18:59:01.513000-04:00</QCDoneStatusDate>
323 <SiteEstablishmentStatus xsi:nil="true"/>
324 <SiteEstablishmentStatusDate>0001-01-01T00:00:00.000000-05:00</SiteEstablishmentStatusDate>
325 <IPFNumber>0</IPFNumber>
326 <DUNSNumber>0</DUNSNumber>
327 <GUID>cfe9e9e0-68a3-45c9-81c0-74848523133b</GUID>
328 <CreatedDate>2006-05-18T18:59:01.513000-04:00</CreatedDate>
329 <LastModifiedDate>2006-05-18T18:59:01.513000-04:00</LastModifiedDate>
330 <RecordStatus>Active</RecordStatus>
331 <RecordStatusDate>2006-05-18T18:59:01.513000-04:00</RecordStatusDate>
332 <Associations>
333 <Association>
334 <Role>Employee</Role>
335 <GUID>9a9a9a-ababab</GUID>
336 <QCDoneStatus>Yes</QCDoneStatus>
337 <QCDoneStatusDate>2006-06-13T01:29:09.030000-04:00</QCDoneStatusDate>
338 <CreatedDate>2006-06-13T01:29:09.030000-04:00</CreatedDate>
339 <LastModifiedDate>2006-07-25T15:27:23.783000-04:00</LastModifiedDate>
340 <RecordStatus>Active</RecordStatus>
341 <RecordStatusDate>2006-06-13T01:29:09.030000-04:00</RecordStatusDate>
342 <Addresses>
343 <Address>
344 <StreetName1>123 Front St.</StreetName1>
345 <StreetName2 xsi:nil="true"/>
346 <StreetName3 xsi:nil="true"/>
347 <StreetName4 xsi:nil="true"/>
348 <CityName>City</CityName>
349 <CityGUID>234234</CityGUID>
350 <CityCreatedDate>2006-05-08T20:06:45.143000-04:00</CityCreatedDate>
351 <CityLastModifiedDate>2006-05-08T20:06:45.143000-04:00</CityLastModifiedDate>
352 <CityRecordStatus>Active</CityRecordStatus>
353 <CityRecordStatusDate>2006-05-08T20:06:45.143000-04:00</CityRecordStatusDate>
354 <StateName>New York</StateName>
355 <StateGUID>9fd469e1-4d4a-4f38-9def-50038e5ecca2</StateGUID>
356 <StateCreatedDate>2006-04-22T16:09:35.830000-04:00</StateCreatedDate>
357 <StateLastModifiedDate>2006-04-22T16:09:35.830000-04:00</StateLastModifiedDate>
358 <StateRecordStatus>Active</StateRecordStatus>
359 <StateRecordStatusDate>2006-04-22T16:09:35.830000-04:00</StateRecordStatusDate>
360 <CountryName>United States</CountryName>
361 <CountryCode>USA</CountryCode>
362 <CountryGUID>532d35dd-3a49-408a-a416-20c41e9c7997</CountryGUID>
363 <CountryCreatedDate>2006-04-22T15:30:47.000000-04:00</CountryCreatedDate>
364 <CountryLastModifiedDate>2006-04-22T15:30:47.000000-04:00</CountryLastModifiedDate>
365 <CountryRecordStatus>Active</CountryRecordStatus>
366 <CountryRecordStatusDate>2006-04-22T15:30:47.000000-04:00</CountryRecordStatusDate>
367 <ZipPostalCode>12345</ZipPostalCode>
368 <GUID>b2414fa9-7375-4d26-8d76-89a6915d6751</GUID>
369 <CreatedDate>2006-06-13T01:29:09.030000-04:00</CreatedDate>
370 <LastModifiedDate>2006-07-29T23:45:17.670000-04:00</LastModifiedDate>
371 <RecordStatus>Active</RecordStatus>
372 <RecordStatusDate>2006-06-13T01:29:09.030000-04:00</RecordStatusDate>
373 <Type>Office</Type>
374 <TypeOtherSpecify/>
375 <InternalOffice></InternalOffice>
376 <MailStopCode/>
377 <PreferredFlag>Yes</PreferredFlag>
378 <ActiveFromDate>2006-06-13T01:29:09.000000-04:00</ActiveFromDate>
379 <QCDoneStatus>Yes</QCDoneStatus>
380 <QCDoneStatusDate>2006-06-13T01:29:09.030000-04:00</QCDoneStatusDate>
381 </Address>
382 </Addresses>
383 <ContactMechanisms>
384 <ContactMechanism>
385 <ContactType>Phone</ContactType>
386 <ContactTypeOtherSpecify xsi:nil="true"/>
387 <ContactValue>555-5555</ContactValue>
388 <ContactAreaCode>555</ContactAreaCode>
389 <ContactCountryCallingCode>1</ContactCountryCallingCode>
390 <ContactTollFreeFlag xsi:nil="true"/>
391 <ContactGUID>123</ContactGUID>
392 <ContactCreatedDate>2006-06-13T01:29:09.047000-04:00</ContactCreatedDate>
393 <ContactLastModifiedDate>2007-02-23T16:36:10.260000-05:00</ContactLastModifiedDate>
394 <ContactRecordStatus>Active</ContactRecordStatus>
395 <ContactRecordStatusDate>2006-06-13T01:29:09.047000-04:00</ContactRecordStatusDate>
396 <Role>Business</Role>
397 <PhoneExtension/>
398 <QCDoneStatus>Yes</QCDoneStatus>
399 <QCDoneStatusDate>2006-06-13T01:29:09.047000-04:00</QCDoneStatusDate>
400 <ActiveFromDate>2006-06-13T01:29:09.000000-04:00</ActiveFromDate>
401 <GUID>321</GUID>
402 <CreatedDate>2006-06-13T01:29:09.047000-04:00</CreatedDate>
403 <ModifiedDate>2006-07-29T23:53:03.323000-04:00</ModifiedDate>
404 <PreferredFlag>Yes</PreferredFlag>
405 <RecordStatus>Inactive</RecordStatus>
406 <RecordStatusDate>2006-07-29T23:53:03.393000-04:00</RecordStatusDate>
407 </ContactMechanism>
408 <ContactMechanism>
409 <ContactType>Email</ContactType>
410 <ContactTypeOtherSpecify xsi:nil="true"/>
411 <ContactValue>[email protected]</ContactValue>
412 <ContactAreaCode xsi:nil="true"/>
413 <ContactCountryCallingCode>0</ContactCountryCallingCode>
414 <ContactTollFreeFlag xsi:nil="true"/>
415 <ContactGUID>ddd</ContactGUID>
416 <ContactCreatedDate>2006-06-13T01:29:09.047000-04:00</ContactCreatedDate>
417 <ContactLastModifiedDate>2006-06-13T01:29:09.047000-04:00</ContactLastModifiedDate>
418 <ContactRecordStatus>Active</ContactRecordStatus>
419 <ContactRecordStatusDate>2006-06-13T01:29:09.047000-04:00</ContactRecordStatusDate>
420 <Role>Business</Role>
421 <PhoneExtension xsi:nil="true"/>
422 <QCDoneStatus>Yes</QCDoneStatus>
423 <QCDoneStatusDate>2006-06-13T01:29:09.063000-04:00</QCDoneStatusDate>
424 <ActiveFromDate>2006-06-13T01:29:09.063000-04:00</ActiveFromDate>
425 <GUID>111</GUID>
426 <CreatedDate>2006-06-13T01:29:09.063000-04:00</CreatedDate>
427 <ModifiedDate>2006-06-13T01:29:09.063000-04:00</ModifiedDate>
428 <PreferredFlag>Yes</PreferredFlag>
429 <RecordStatus>Active</RecordStatus>
430 <RecordStatusDate>2006-06-13T01:29:09.063000-04:00</RecordStatusDate>
431 </ContactMechanism>
432 </ContactMechanisms>
433 <Persons>
434 <Person>
435 <PersonID>100448</PersonID>
436 <Prefix/>
437 <FirstName>John</FirstName>
438 <MiddleName/>
439 <LastName>Doe</LastName>
440 <Suffix/>
441 <PreferredName/>
442 <Gender/>
443 <PrimaryLanguage xsi:nil="true"/>
444 <GUID>123</GUID>
445 <RecordStatus>Active</RecordStatus>
446 <RecordStatusDate>2007-04-29T00:11:50.750000-04:00</RecordStatusDate>
447 <CreatedDate>2006-06-13T00:57:21.090000-04:00</CreatedDate>
448 <LastModifiedDate>2007-04-29T00:11:50.770000-04:00</LastModifiedDate>
449 <QCDoneStatus>Yes</QCDoneStatus>
450 <QCDoneStatusDate>2006-06-13T00:57:22.977000-04:00</QCDoneStatusDate>
451 <PersonTypes>
452 <PersonType>
453 <Type>Resource Personnel</Type>
454 <GUID>3049ddcd-3590-4fd9-a534-e2cea5b82c09</GUID>
455 <RecordStatus>Active</RecordStatus>
456 <RecordStatusDate>2006-06-13T00:57:22.977000-04:00</RecordStatusDate>
457 <CreatedDate>2006-06-13T00:57:21.090000-04:00</CreatedDate>
458 <LastModifiedDate>2007-04-29T00:11:50.817000-04:00</LastModifiedDate>
459 <QCDoneStatus>Yes</QCDoneStatus>
460 <QCDoneStatusDate>2006-06-13T00:57:22.977000-04:00</QCDoneStatusDate>
461 </PersonType>
462 </PersonTypes>
463 </Person>
464 </Persons>
465 </Association>
466 </Associations>
467 </OrganizationType>
468 </OrganizationTypes>
469 <ImportedDate>2007-04-30</ImportedDate>
470 </OrganizationPersonAssoc>
471 ';
472 end;
473 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.00
SQL> begin
2 dbms_xmlschema.registerSchema
3 (
4 schemaURL => :schemaURL
5 ,schemaDoc => :xmlSchema
6 ,local => TRUE
7 ,genBean => false
8 ,genTypes => TRUE
9 ,genTables => TRUE
10 ,enableHierarchy => DBMS_XMLSCHEMA.ENABLE_HIERARCHY_NONE
11 );
12 end;
13 /
PL/SQL procedure successfully completed.
Elapsed: 00:00:03.67
SQL> insert into Person values ( xmltype (:xmltext1))
2 /
1 row created.
Elapsed: 00:00:00.07
SQL> insert into org_person_assoc values ( xmltype (:xmltext2))
2 /
1 row created.
Elapsed: 00:00:00.03
SQL> commit
2 /
Commit complete.
Elapsed: 00:00:00.00
SQL> CREATE OR REPLACE VIEW XML_PERSON_ASSOCIATION
2 (PERSON)
3 AS
4 select
5 xmlelement("Person",
6 xmlforest(
7 extractvalue(value(p),'/Person/PersonID') "PersonID",
8 extractvalue(value(p),'/Person/Prefix') "Prefix",
9 extractvalue(value(p),'/Person/FirstName') "FirstName",
10 extractvalue(value(p),'/Person/MiddleName') "MiddleName",
11 extractvalue(value(p),'/Person/LastName') "LastName",
12 extractvalue(value(p),'/Person/Suffix') "Suffix",
13 extractvalue(value(p),'/Person/PreferredName') "PreferredName",
14 extractvalue(value(p),'/Person/Gender') "Gender",
15 extractvalue(value(p),'/Person/PrimaryLanguage') "PrimaryLanguage",
16 extractvalue(value(p),'/Person/RecordStatus') "RecordStatus",
17 extractvalue(value(p),'/Person/ImportedDate') "ImportedDate",
18 (select
19 xmlagg(
20 xmlelement("Association",
21 xmlforest(
22 extractvalue(value(oa),'/OrganizationPersonAssoc/Name') "Name",
23 extractvalue(value(ot),'/OrganizationType/OrganizationID') "OrganizationID",
24 extractvalue(value(ot),'/OrganizationType/Type') "OrganizationType",
25 extractvalue(value(a),'/Association/Role') "Role",
26 extractvalue(value(a),'/Association/RecordStatus') "RecordStatus",
27 extractvalue(value(oa),'/OrganizationPersonAssoc/ImportedDate') "ImportedDate"
28 ),
29 xmlelement("PersonTypes",
30 extract(value(per),'/Person/PersonTypes/PersonType')
31 ),
32 xmlelement("Addresses",
33 extract(value(a),'/Association/Addresses/Address')
34 ),
35 xmlelement("ContactMechanisms",
36 extract(value(a),'/Association/ContactMechanisms/ContactMechanism')
37 )
38 )
39 )
40 from org_person_assoc oa,
41 table(xmlsequence(extract(value(oa),'/OrganizationPersonAssoc/OrganizationTypes/OrganizationType'))) ot,
42 table(xmlsequence(extract(value(ot),'/OrganizationType/Associations/Association'))) a,
43 table(xmlsequence(extract(value(a),'/Association/Persons/Person'))) per
44 where extractvalue(value(per),'/Person/PersonID') = extractvalue(value(p),'/Person/PersonID')
45 ) "Associations"
46 )
47 ) person
48 from person p
49 /
View created.
Elapsed: 00:00:00.06
SQL> set autotrace on explain
SQL> --
SQL> set long 10000 pages 0 lines 150
SQL> --
SQL> select person
2 from xml_person_association o
3 where existsnode(person,'/Person/Associations/Association[OrganizationID=30097]')=1
4 /
<Person><PersonID>100448</PersonID><FirstName>John</FirstName><LastName>Doe</LastName><RecordStatus>Active</RecordStatus><ImportedDate>2007-04-30</Imp
ortedDate><Associations><Association><Name>Org Name Office</Name><OrganizationID>30097</OrganizationID><OrganizationType>Agency</OrganizationType><Rol
e>Employee</Role><RecordStatus>Active</RecordStatus><ImportedDate>2007-04-30</ImportedDate><PersonTypes><PersonType>
<Type>Resource Personnel</Type>
<GUID>3049ddcd-3590-4fd9-a534-e2cea5b82c09</GUID>
<RecordStatus>Active</RecordStatus>
<RecordStatusDate>2006-06-13T00:57:22.977000-04:00</RecordStatusDate>
<CreatedDate>2006-06-13T00:57:21.090000-04:00</CreatedDate>
<LastModifiedDate>2007-04-29T00:11:50.817000-04:00</LastModifiedDate>
<QCDoneStatus>Yes</QCDoneStatus>
<QCDoneStatusDate>2006-06-13T00:57:22.977000-04:00</QCDoneStatusDate>
</PersonType>
</PersonTypes><Addresses><Address>
<StreetName1>123 Front St.</StreetName1>
<StreetName2 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<StreetName3 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<StreetName4 xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<CityName>City</CityName>
<CityGUID>234234</CityGUID>
<CityCreatedDate>2006-05-08T20:06:45.143000-04:00</CityCreatedDate>
<CityLastModifiedDate>2006-05-08T20:06:45.143000-04:00</CityLastModifiedDate>
<CityRecordStatus>Active</CityRecordStatus>
<CityRecordStatusDate>2006-05-08T20:06:45.143000-04:00</CityRecordStatusDate>
<StateName>New York</StateName>
<StateGUID>9fd469e1-4d4a-4f38-9def-50038e5ecca2</StateGUID>
<StateCreatedDate>2006-04-22T16:09:35.830000-04:00</StateCreatedDate>
<StateLastModifiedDate>2006-04-22T16:09:35.830000-04:00</StateLastModifiedDate>
<StateRecordStatus>Active</StateRecordStatus>
<StateRecordStatusDate>2006-04-22T16:09:35.830000-04:00</StateRecordStatusDate>
<CountryName>United States</CountryName>
<CountryCode>USA</CountryCode>
<CountryGUID>532d35dd-3a49-408a-a416-20c41e9c7997</CountryGUID>
<CountryCreatedDate>2006-04-22T15:30:47.000000-04:00</CountryCreatedDate>
<CountryLastModifiedDate>2006-04-22T15:30:47.000000-04:00</CountryLastModifiedDate>
<CountryRecordStatus>Active</CountryRecordStatus>
<CountryRecordStatusDate>2006-04-22T15:30:47.000000-04:00</CountryRecordStatusDate>
<ZipPostalCode>12345</ZipPostalCode>
<GUID>b2414fa9-7375-4d26-8d76-89a6915d6751</GUID>
<CreatedDate>2006-06-13T01:29:09.030000-04:00</CreatedDate>
<LastModifiedDate>2006-07-29T23:45:17.670000-04:00</LastModifiedDate>
<RecordStatus>Active</RecordStatus>
<RecordStatusDate>2006-06-13T01:29:09.030000-04:00</RecordStatusDate>
<Type>Office</Type>
<TypeOtherSpecify/>
<InternalOffice/>
<MailStopCode/>
<PreferredFlag>Yes</PreferredFlag>
<ActiveFromDate>2006-06-13T01:29:09.000000-04:00</ActiveFromDate>
<QCDoneStatus>Yes</QCDoneStatus>
<QCDoneStatusDate>2006-06-13T01:29:09.030000-04:00</QCDoneStatusDate>
</Address>
</Addresses><ContactMechanisms><ContactMechanism>
<ContactType>Phone</ContactType>
<ContactTypeOtherSpecify xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<ContactValue>555-5555</ContactValue>
<ContactAreaCode>555</ContactAreaCode>
<ContactCountryCallingCode>1</ContactCountryCallingCode>
<ContactTollFreeFlag xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<ContactGUID>123</ContactGUID>
<ContactCreatedDate>2006-06-13T01:29:09.047000-04:00</ContactCreatedDate>
<ContactLastModifiedDate>2007-02-23T16:36:10.260000-05:00</ContactLastModifiedDate>
<ContactRecordStatus>Active</ContactRecordStatus>
<ContactRecordStatusDate>2006-06-13T01:29:09.047000-04:00</ContactRecordStatusDate>
<Role>Business</Role>
<PhoneExtension/>
<QCDoneStatus>Yes</QCDoneStatus>
<QCDoneStatusDate>2006-06-13T01:29:09.047000-04:00</QCDoneStatusDate>
<ActiveFromDate>2006-06-13T01:29:09.000000-04:00</ActiveFromDate>
<GUID>321</GUID>
<CreatedDate>2006-06-13T01:29:09.047000-04:00</CreatedDate>
<ModifiedDate>2006-07-29T23:53:03.323000-04:00</ModifiedDate>
<PreferredFlag>Yes</PreferredFlag>
<RecordStatus>Inactive</RecordStatus>
<RecordStatusDate>2006-07-29T23:53:03.393000-04:00</RecordStatusDate>
</ContactMechanism>
<ContactMechanism>
<ContactType>Email</ContactType>
<ContactTypeOtherSpecify xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<ContactValue>[email protected]</ContactValue>
<ContactAreaCode xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<ContactCountryCallingCode>0</ContactCountryCallingCode>
<ContactTollFreeFlag xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<ContactGUID>ddd</ContactGUID>
<ContactCreatedDate>2006-06-13T01:29:09.047000-04:00</ContactCreatedDate>
<ContactLastModifiedDate>2006-06-13T01:29:09.047000-04:00</ContactLastModifiedDate>
<ContactRecordStatus>Active</ContactRecordStatus>
<ContactRecordStatusDate>2006-06-13T01:29:09.047000-04:00</ContactRecordStatusDate>
<Role>Business</Role>
<PhoneExtension xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:nil="true"/>
<QCDoneStatus>Yes</QCDoneStatus>
<QCDoneStatusDate>2006-06-13T01:29:09.063000-04:00</QCDoneStatusDate>
<ActiveFromDate>2006-06-13T01:29:09.063000-04:00</ActiveFromDate>
<GUID>111</GUID>
<CreatedDate>2006-06-13T01:29:09.063000-04:00</CreatedDate>
<ModifiedDate>2006-06-13T01:29:09.063000-04:00</ModifiedDate>
<PreferredFlag>Yes</PreferredFlag>
<RecordStatus>Active</RecordStatus>
<RecordStatusDate>2006-06-13T01:29:09.063000-04:00</RecordStatusDate>
</ContactMechanism>
</ContactMechanisms></Association></Associations></Person>
Elapsed: 00:00:00.42
Execution Plan
Plan hash value: 95656148
| Id | Operation | Name | Rows | Bytes | Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 18040 | 9 (0)| 00:00:01 |
| 1 | SORT AGGREGATE | | 1 | 10096 | | |
| 2 | TABLE ACCESS BY INDEX ROWID | SYS_NT32zHSpCZQ9ynComtqqKsrw== | 1 | 10096 | 2 (0)| 00:00:01 |
|* 3 | INDEX RANGE SCAN | SYS_C009300 | 1 | | 2 (0)| 00:00:01 |
| 4 | SORT AGGREGATE | | 1 | 48284 | | |
| 5 | TABLE ACCESS BY INDEX ROWID | SYS_NTjbkXqKq3S96fbEOM3Qs5Gg== | 1 | 48284 | 2 (0)| 00:00:01 |
|* 6 | INDEX RANGE SCAN | SYS_C009296 | 1 | | 2 (0)| 00:00:01 |
| 7 | SORT AGGREGATE | | 1 | 28187 | | |
| 8 | TABLE ACCESS BY INDEX ROWID| SYS_NTm2nBfKKNSGm6hs2e1Z0w/A== | 1 | 28187 | 2 (0)| 00:00:01 |
|* 9 | INDEX RANGE SCAN | SYS_C009297 | 1 | | 2 (0)| 00:00:01 |
| 10 | SORT AGGREGATE | | 1 | 13910 | | |
| 11 | NESTED LOOPS | | 1 | 13910 | 6 (0)| 00:00:01 |
| 12 | NESTED LOOPS | | 1 | 8131 | 5 (0)| 00:00:01 |
| 13 | NESTED LOOPS | | 1 | 4097 | 4 (0)| 00:00:01 |
|* 14 | TABLE ACCESS FULL | SYS_NT7Erd/G5iSPWX9w20Z5cNRg== | 1 | 43 | 3 (0)| 00:00:01 |
|* 15 | TABLE ACCESS BY INDEX ROWID | SYS_NTQWY/m3uES5GM7AByRclr8A== | 1 | 4054 | 1 (0)| 00:00:01 |
|* 16 | INDEX UNIQUE SCAN | SYS_C009310 | 1 | | 0 (0)| 00:00:01 |
|* 17 | TABLE ACCESS BY INDEX ROWID | SYS_NTTiDHMvB7RbSEfNxho66yQg== | 1 | 4034 | 1 (0)| 00:00:01 |
|* 18 | INDEX UNIQUE SCAN | SYS_C009314 | 1 | | 0 (0)| 00:00:01 |
| 19 | TABLE ACCESS BY INDEX ROWID | ORG_PERSON_ASSOC | 1 | 5779 | 1 (0)| 00:00:01 |
|* 20 | INDEX UNIQUE SCAN | SYS_C009320 | 1 | | 0 (0)| 00:00:01 |
|* 21 | FILTER | | | | | |
| 22 | TABLE ACCESS FULL | PERSON | 1 | 18040 | 3 (0)| 00:00:01 |
| 23 | NESTED LOOPS | | | | | |
| 24 | NESTED LOOPS | | 1 | 5893 | 6 (0)| 00:00:01 |
| 25 | NESTED LOOPS | | 1 | 2125 | 5 (0)| 00:00:01 |
| 26 | NESTED LOOPS | | 1 | 93 | 4 (0)| 00:00:01 |
|* 27 | TABLE ACCESS FULL | SYS_NT7Erd/G5iSPWX9w20Z5cNRg== | 1 | 43 | 3 (0)| 00:00:01 |
|* 28 | TABLE ACCESS BY INDEX ROWID| SYS_NTQWY/m3uES5GM7AByRclr8A== | 1 | 50 | 1 (0)| 00:00:01 |
|* 29 | INDEX UNIQUE SCAN | SYS_C009310 | 1 | | 0 (0)| 00:00:01 |
|* 30 | TABLE ACCESS BY INDEX ROWID | SYS_NTTiDHMvB7RbSEfNxho66yQg== | 1 | 2032 | 1 (0)| 00:00:01 |
|* 31 | INDEX UNIQUE SCAN | SYS_C009314 | 1 | | 0 (0)| 00:00:01 |
|* 32 | INDEX UNIQUE SCAN | SYS_C009320 | 1 | | 0 (0)| 00:00:01 |
| 33 | TABLE ACCESS BY INDEX ROWID | ORG_PERSON_ASSOC | 1 | 3768 | 1 (0)| 00:00:01 |
Predicate Information (identified by operation id):
3 - access("NESTED_TABLE_ID"=:B1)
6 - access("NESTED_TABLE_ID"=:B1)
9 - access("NESTED_TABLE_ID"=:B1)
14 - filter("SYS_NC_TYPEID$" IS NOT NULL AND "PersonID"=:B1)
15 - filter("SYS_NC_TYPEID$" IS NOT NULL)
16 - access("NESTED_TABLE_ID"="SYS_ALIAS_1"."SYS_NC0002700028$")
17 - filter("SYS_NC_TYPEID$" IS NOT NULL)
18 - access("NESTED_TABLE_ID"="SYS_ALIAS_0"."SYS_NC0003700038$")
20 - access("NESTED_TABLE_ID"="OA"."SYS_NC0002100022$")
21 - filter( EXISTS (SELECT 0 FROM "XDBTEST"."SYS_NT7Erd/G5iSPWX9w20Z5cNRg=="
"SYS_ALIAS_1","XDBTEST"."SYS_NTQWY/m3uES5GM7AByRclr8A=="
"SYS_ALIAS_3","XDBTEST"."SYS_NTTiDHMvB7RbSEfNxho66yQg==" "SYS_ALIAS_0","XDBTEST"."ORG_PERSON_ASSOC" "OA"
WHERE "SYS_ALIAS_0"."NESTED_TABLE_ID"="OA"."SYS_NC0002100022$" AND
"SYS_ALIAS_1"."NESTED_TABLE_ID"="SYS_ALIAS_0"."SYS_NC0003700038$" AND "SYS_ALIAS_0"."SYS_NC_TYPEID$" IS
NOT NULL AND TO_NUMBER("SYS_ALIAS_0"."OrganizationID")=30097 AND
"SYS_ALIAS_4"."NESTED_TABLE_ID"="SYS_ALIAS_1"."SYS_NC0002700028$" AND "SYS_ALIAS_1"."SYS_NC_TYPEID$" IS
NOT NULL AND "SYS_ALIAS_4"."SYS_NC_TYPEID$" IS NOT NULL AND "SYS_ALIAS_4"."PersonID"=:B1))
27 - filter("SYS_ALIAS_4"."SYS_NC_TYPEID$" IS NOT NULL AND "SYS_ALIAS_4"."PersonID"=:B1)
28 - filter("SYS_ALIAS_1"."SYS_NC_TYPEID$" IS NOT NULL)
29 - access("SYS_ALIAS_4"."NESTED_TABLE_ID"="SYS_ALIAS_1"."SYS_NC0002700028$")
30 - filter("SYS_ALIAS_0"."SYS_NC_TYPEID$" IS NOT NULL AND
TO_NUMBER("SYS_ALIAS_0"."OrganizationID")=30097)
31 - access("SYS_ALIAS_1"."NESTED_TABLE_ID"="SYS_ALIAS_0"."SYS_NC0003700038$")
32 - access("SYS_ALIAS_0"."NESTED_TABLE_ID"="OA"."SYS_NC0002100022$")
Note
- dynamic sampling used for this statement
SQL> select extract(person,'/Person/Associations/Association')
2 from xml_person_association o
3 where existsnode(person,'/Person/Associations/Association[OrganizationID=30097]')=1
4 /
<Association><Name>Org Name Office</Name><OrganizationID>30097</OrganizationID><OrganizationType>Agency</OrganizationType><Role>Employee</Role><Record
Status>Active</RecordStatus><ImportedDate>2007-04-30</ImportedDate><PersonTypes><PersonType><Type>Resource Personnel</Type><GUID>3049ddcd-3590-4fd9-a5
34-e2cea5b82c09</GUID><RecordStatus>Active</RecordStatus><RecordStatusDate>2006-06-13T00:57:22.977000-04:00</RecordStatusDate><CreatedDate>2006-06-13T
00: -
Hi
I am experiencing Fax problems in my Cisco Voice network.There are about different problems for each fax machine.
All the fax machines are the same model.
1. Faxes unable to send out to external lines
Faxes call an outside line, when the remote fax connects, after a minute of negotiation, the call drops, fax says 'Communication Error'
2. Faxes send mulitple copies of the first page
Faxes call an outside line, when the remote fax connects, but then the fax thinks the call has failed, but has sent the first page. It then tries to resend with the first page being resent again and again.
This has been affecting the faxes on the VG224.
If you need to any information to find a solution please reply me back.
Thanks
VinoTo allow the ports on the specified network module for Voice or WAN interface card to use the network clock for timing, you need to use the network-clock-participate command as mentioned previously.
However, each port can be selected as the clock source with the network-clock-source command.
This configures the appropriate interface to supply clock to other ports or network modules that you have chosen to participate in network clocking with the network-clock-participate command.
For example, say you have configured a vwic2-2mft-e1-t1 as follows:-
network-clock-participate wic 2
network-clock-select 1 E1 0/2/0
This synchronises the clocks for both port on the dual e1/t1 from 0/2/0.
Therefore if you have a separate vwic and wic in the same router, then do not specify one or the other with network-clock-participate.
This will essentially exclude it from synchronising the port. The port would then resort to using the clocking method stipulated under the controller, normally either line or internal.
Hope this clarifies the situation.
HTH
Allan. -
Problems running Flash 11.7.700.224 on Fire Fox 22.0
Problems running Flash 11.7.700.224 on Windows 8, browser Fire Fox 22.0. Plug-in crashing and/or not responsive messages; browser hanging and/or slow, especially when opening new windows; You Tube videos error messages; Flash not detected on Adobe Troubleshooting page, even though installed; Flash content loads but does not display in window (no frame, or black or white screen in frame). Thank you for any reply, hopefully simple -I'm not technically inclined.
After using Flash player 11.8.800.94 for one day, it crashed.
So, I uninstalled it using the uninstaller provided by adobe then
disabled avast then
reinstalled 11.8.800.94.
Attempted to restart, but got this error message:
The exception unknown software exception (0xe0434352) occurred in the application at location 0x74c02005.
While writing it down, restart reverted to desktop.
Successfully restarted and opened FF22.0 browser and
went here: http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html#main_Find_the_Flash_ Player_version_installed_on_your_machine to check version.
I could not see the Flash movie, the version checker said that Flash Player is not installed -- even though it shows Shockwave Flash 11.8.800.94 installed on the plugins list on Fire fox add-ons manager.
Is there a difference between Flash Player 11.8.800.94 and the latest Flash Player plugin for Fire Fox, or are they the same thing?
I have no idea how to fix this and not finding any clear answers on any of the other discussion question pages on this topic.
Can anyone from Adobe please help? -
Scanner and fax problems with the Officejet 7410 AIO
Hi
I have Windows 7 SP1 Ultimate 64 bit and I installed the basic drivers for the network of the Officejet 7410 AIO printer and I checked that all its functions worked properly.
Now, the functionality of the scanner and fax do not work more as in the "Devices and Printers" not appear more their relative icons. How come? How do I install them manually?
Thanks
Bye
balubetoHi balubeto,
Welcome to the HP Forums!
I see that you are having scanning, and faxing problems with your HP Officejet 7410 on Windows 7 SP1.
I would recommend the following:
Run the HP Print and Scan Doctor, to diagnose the issue.
Uninstall the software. Uninstalling the Printer Software.
Re-install the software using the HP Printer Install Wizard for Windows.
Hope this helps, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
Problem using trinidad 2.0 and facelets
Hi everyone!!!
I am facing problem using Trinidad 2.0 components with facelets. I am using Tomcat 6.0 server , 1.6_20 jdk with jre6. I am using springsource tool suite as an IDE.
My problem is regarding usage of facelets with trinidad component library. I am trying to run *<tr:panelTabbed>* component of TRINIDAD 2.0 on *.jsp* as well as *.xhtml*. If I run my jsp , I am able to used panel tab fully like switching between two tabs. Same code I have added in my .xhtml page in the same project under *<ui:composition>* tags. I am successfully able show the component on the screen , but I am not able to switch between the two tabs. Here are the list of libs that have added to the project.
commons-beanutils-1.7.0.jar,commons-codec-1.3.jar,commons-collections-3.2.jar,commons-digester-1.8.jar,commons-discovery-0.4.jar,
commons-el.jar,commons-fileupload.jar,commons-logging-1.1.1.jar,jsf-facelets.jar,jstl.jar,myfaces-api-2.0.1.jar,myfaces-impl-2.0.1.jar,
trinidad-api-2.0.0-alpha-2.jar,trinidad-impl-2.0.0-alpha-2.jar
index.jsp
<%@taglib uri="http://myfaces.apache.org/trinidad" prefix="tr"%><html>
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
<head>
<title>Your first JSF Application</title>
</head>
<body bgcolor="white">
<f:view>
<tr:document>
<h:form>
<tr:panelTabbed position="above">
<tr:showDetailItem text="Account">
<tr:panelBox text="Account Information Details"
inlineStyle="width: 100%;">
<tr:panelList inlineStyle="width: 100px;">
<tr:panelHorizontalLayout inlineStyle="height:100px;">
<f:facet name="separator">
<tr:spacer width="100" height="100" />
</f:facet>
<tr:outputText value="Account Number" styleClass="AFFieldText" />
<tr:outputText value="Effective Date" styleClass="AFFieldText" />
<tr:outputText value="Expiration Date" styleClass="AFFieldText" />
</tr:panelHorizontalLayout>
<tr:panelHorizontalLayout inlineStyle="height:100px;">
<f:facet name="separator">
<tr:spacer width="100" height="100" />
</f:facet>
<tr:outputText value="#{accDet.accountNumber}"
styleClass="AFFieldText" />
<tr:outputText value="#{accDet.effectiveDate}"
styleClass="AFFieldText" />
<tr:outputText value="#{accDet.expirationDate}"
styleClass="AFFieldText" />
</tr:panelHorizontalLayout>
<tr:separator />
<tr:panelHorizontalLayout inlineStyle="height:100px;">
<f:facet name="separator">
<tr:spacer width="100" height="1" />
</f:facet>
<tr:outputText value="Address" styleClass="AFFieldText" />
<tr:outputText value="Fax" styleClass="AFFieldText" />
</tr:panelHorizontalLayout>
<tr:panelHorizontalLayout inlineStyle="height:100px;">
<f:facet name="separator">
<tr:spacer width="100" height="1" />
</f:facet>
<tr:outputText value="#{accDet.address}"
styleClass="AFFieldText" />
<tr:outputText value="#{accDet.fax}" styleClass="AFFieldText" />
</tr:panelHorizontalLayout>
</tr:panelList>
</tr:panelBox>
</tr:showDetailItem>
<tr:showDetailItem text="Insured">
<tr:panelHeader text="Header 2">
<tr:panelFormLayout>
<tr:inputText label="Text1" />
<tr:inputText label="Text2" />
<tr:inputText label="Text3" />
</tr:panelFormLayout>
</tr:panelHeader>
</tr:showDetailItem>
</tr:panelTabbed>
</h:form>
</tr:document>
</f:view>
</body>
</html>
guess.xhtml
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml"
xmlns:ui="http://java.sun.com/jsf/facelets"
xmlns:h="http://java.sun.com/jsf/html"
xmlns:tr="http://myfaces.apache.org/trinidad"
xmlns:f="http://java.sun.com/jsf/core">
<body bgcolor="white">
<f:view>
<tr:document>
<h:form>
<tr:panelTabbed>
<tr:showDetailItem text="Tab 1"></tr:showDetailItem>
<tr:showDetailItem text="Tab 2"></tr:showDetailItem>
</tr:panelTabbed>
</h:form>
</tr:document>
</f:view>
</body>
</html>
web.xml
<?xml version="1.0" encoding="UTF-8"?>
<web-app xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns="http://java.sun.com/xml/ns/javaee" xmlns:web="http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-app_2_5.xsd"
id="WebApp_ID" version="2.5">
<display-name>Demo_ProtoType</display-name>
<filter>
<filter-name>trinidad</filter-name>
<filter-class>org.apache.myfaces.trinidad.webapp.TrinidadFilter</filter-class>
</filter>
<filter-mapping>
<filter-name>trinidad</filter-name>
<servlet-name>faces</servlet-name>
</filter-mapping>
<context-param>
<param-name>javax.faces.STATE_SAVING_METHOD</param-name>
<param-value>client</param-value>
</context-param>
<listener>
<listener-class>
org.apache.myfaces.webapp.StartupServletContextListener</listener-class>
</listener>
<servlet>
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
<servlet-name>Faces Servlet</servlet-name>
<url-pattern>*.xhtml</url-pattern>
</servlet-mapping>
<servlet>
<servlet-name>resources</servlet-name>
<servlet-class>org.apache.myfaces.trinidad.webapp.ResourceServlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>resources</servlet-name>
<url-pattern>/adf/*</url-pattern>
</servlet-mapping>
<context-param>
<param-name>org.apache.myfaces.trinidad.ALTERNATE_VIEW_HANDLER</param-name>
<param-value>org.apache.myfaces.trinidadinternal.facelets.TrinidadFaceletViewHandler</param-value>
</context-param>
<context-param>
<param-name>org.apache.myfaces.trinidad.FACELETS_VIEW_MAPPINGS</param-name>
<param-value>*.xhtml</param-value>
</context-param>
</web-app>
faces-config.xml
<?xml version="1.0" encoding="UTF-8"?>
<faces-config xmlns="http://java.sun.com/xml/ns/javaee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/javaee http://java.sun.com/xml/ns/javaee/web-facesconfig_1_2.xsd"
version="1.2">
<application>
<default-render-kit-id>org.apache.myfaces.trinidad.core</default-render-kit-id>
</application>
<managed-bean>
<managed-bean-name>accDet</managed-bean-name>
<managed-bean-class>com.csc.Account.AccountDetail</managed-bean-class>
<managed-bean-scope>session</managed-bean-scope>
</managed-bean>
</faces-config>Following warning is coming on server start up
java.lang.ClassNotFoundException: org.apache.myfaces.trinidadinternal.facelets.TrinidadFaceletViewHandler
at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1484)
PLEASE LET ME KNOW IF ANYONE NEED THE .WAR file .I can send it over mail. Please hrlp me out !!! I have literally tried everything.This is the only HOPEHi gimbal2 ,
thanks for your prompt response.
I deleted jsf-facelets.jar from the lib.
Also I removed <context-param>
<param-name>org.apache.myfaces.trinidad.ALTERNATE_VIEW_HANDLER</param-name>
<param-value>org.apache.myfaces.trinidadinternal.facelets.TrinidadFaceletViewHandler</param-value>
</context-param>
<context-param>
<param-name>org.apache.myfaces.trinidad.FACELETS_VIEW_MAPPINGS</param-name>
<param-value>*.xhtml</param-value>
</context-param>Now that error has gone .But I am still not able to switch between the tabs for .xhtml page but it is working fine for .jsp page.
For .xhtml page , on clicking on the tab, console is showing something like below
Aug 17, 2010 9:20:49 PM org.apache.myfaces.trinidad.component.UIXShowDetail broadcast
WARNING: Event org.apache.myfaces.trinidad.event.DisclosureEvent[phaseId=INVOKE_APPLICATION(5),component=CoreShowDetailItem[UINodeFacesBean, id=j_id957384125_39108532],expanded=true] was delivered to a showDetail already in that disclosure state. -
Faxing problems with internal modem in iBook
I have been trying to use Apples built in faxing capabilities. I use a cable connection over wireless airport to connect to the internet. Through reading in these forums I found out that you need to be hooked up through a phone line to fax—makes sense.
I am trying to do that now but encountering problems. Here's what's happening—can anyone help me out?
-faxing from Microsoft Word using "fax pdf".
-My I book G4 is connected to a phone line and connected to my wireless network via airport.
-computer appears to send fax successfully from the application but doesn't actually fax.
-i check it in the fax list, double click my internal modem window and it opens the job window for the modem. My job is still there, holding. When I click "resume" I hear a dial tone and it appears to try to be faxing. But suddenly a busy signal gets in the way and it puts the fax on hold. This keeps happening over and over again.
-I realize that maybe the line I'm faxing to is busy, but I'm also wondering if it has anything to do with my modem not being set up correctly. when I go into system preferences>network>network status there is a red icon next to internal modem and it says "Internal Modem is not set up".
My question is--how to I get my internal modem to be "set up"? In the old days I used to have my dial up info in there in TCP/IP but I don't have that service anymore. I was under the impression that you could fax just using the laptop's internal modem hooked up to a phone line and you didn't need any provider service..is this true or not?
In the "printing and faxing" system preferences window I have my phone number in there.
Can anyone help me figure this out? I'm not sure if I need any information in the internal modem set up panel and what that would be. Can't I just fax by simply having a phone line and a phone #?
Thanks!
iBook G4 PowerBook6,5 Mac OS X (10.4.3) 1.33GHZ, 256MB memory
iBook G4 PowerBook6,5 Mac OS X (10.4.3) 1.33GHZ, 256MB memoryebonyhack, Welcome to the discussion area!
Have you tried disabling the option to wait for dial tone?
You may have to add some commas (',') to the front of your ISP's phone number to delay the dialing. A comma causes a delay of 1 second. -
Problem using File sharing in a small office network
I have a problem using File sharing on an Imac and Macbook Pro.
My office has a small network running Windows Small office file server 2003. I have one Windows 2000 PC connected to it and 3 Macs, an 2.4 gHz Intel iMac running Leopard 10.5.6 , a MBP running the same and a Mac Mini running 10.5.
From the Finder Shared window of the Mac Mini, I can see all the computers on the network. It also used to be the case for the iMac, but the MBP could never see the Windows PC’s, not the server or the Win2000. This wasn’t a big problem as I was communicating between the Macs and using the shared printer on the iMac.
On Monday Jan 19 the iMac was suddenly unavailable to the other 2 Macs. It was working normally on the Friday. The iMac can access the Mac Mini and copy files to it. The Mac Mini can see the iMac but cannot access it. Even trying to connect as, ends in a failed connection. I have tried rebooting, turning File sharing off and then on again to no avail.
The iMac now also cannot see the Windows PC’s which it previously could.
To get files from the MBP for printing, I now copy it to the Mac Mini and acces the folder from the iMac, a very tedious procedure. I don’t know why this happened and am scared that the Mac Mini is going to do the same thing.
All three computers are also running VMware 2.0 with Windows XP pro, and from VMware the server is visible on all the computers.
Any help will be much appreciated, I live in a small town in South Africa and the local computer suppliers have no knowledge of the Macs.
I think that the problem with the iMac may have started after a software upgrade to 10.5.6 but I am not entirely sure.
Thank you
ajdkWell, you're current method sounds pretty good. But if you want to user a file server, hey go ahead.
What you want to do when you centralize project files is to keep track of which one is the newest and becareful not to overwrite files with the same name. So you either have to set up individual spaces on the server (separate AFP/FTP folders maybe), or you'll need to run a file checkout service.
The individual space is cheaper, but it's not much of a difference from backing up to the network drive. Since you have Gigabit connections, you might even opt to save ALL the user files on the server instead of just the project files.
If you want to run a file checkout service, there's two approaches. You can run a service that can host any kind of file, or you can run a version control system for each kind of application (Photoshop, Word, etc.). Please notice, that as you read further and further along, the methods become more and more expensive and complicated. Once you get to this point, it will be necessary to purchase or build software in addition to the Mac OS X Server package. -
Huge problem using apple mail while sending email to a group...
Hey - I am quite confused... apple mail has huge problems using groups with about 150 addresses when writing and sending an email... the writing of emails is nearly impossible. Once the group name is inserted in the addressline (address book in iCloud!), apple mail uses nearly 100% CPU and further writing is nearly impossible. When sending such an email, all addresses are suddenly visible - though the box is NOT checked and the addresses should be hidden... what can I do? I use this feature (sending mails to groups) on a daily basis and cannot accept visible addresses...
Greetings and sorry for inconvenient english...
ChristofHow about next time you send to the group, cc yourself, or include yourself in the group. Then receive the email on the iphone, you can "reply all" in order to send to the group. If you use an imap account, you can make a new folder, call it something like "groups", and save different group emails there for the next time you need to "reply all".
-
Hi. I am just about to move from the UK to Kuwait. Will I have any problems using my iPhone 4 and able to join a local carrier using this device please?
If your phone is locked to a particular carrier, you must contact them to request they unlock it. Once they've taken care of that and you've followed the instructions to complete the unlock process, you will be able to use the phone elsewhere.
~Lyssa -
Problem using integrated WLS in jDeveloper 11.1.2.1.0
Hey there,
I got a problem using the integrated WLS from the jDeveloper 11.1.2.1.0.
After trying to deploy an ADF Web Application on the integrated WLS, I get the following log message:
LOG
+[Waiting for the domain to finish building...]+
+[11:26:04 AM] Creating Integrated Weblogic domain...+
+[11:28:13 AM] Extending Integrated Weblogic domain...+
+[11:30:06 AM] Integrated Weblogic domain processing completed successfully.+
*** Using HTTP port 7101 ***
*** Using SSL port 7102 ***
+/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/bin/startWebLogic.sh+
+[waiting for the server to complete its initialization...]+
+.+
+.+
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
+.+
WLS Start Mode=Development
+.+
CLASSPATH=/home/robin/bin/wls/oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/home/robin/bin/wls/patch_wls1211/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/robin/bin/wls/patch_oepe100/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/robin/bin/wls/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/robin/bin/wls/jdk160_29/lib/tools.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/weblogic_sp.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/weblogic.jar:/home/robin/bin/wls/modules/features/weblogic.server.modules_12.1.1.0.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/webservices.jar:/home/robin/bin/wls/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/home/robin/bin/wls/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/home/robin/bin/wls/oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/home/robin/bin/wls/wlserver_12.1/common/derby/lib/derbyclient.jar:/home/robin/bin/wls/wlserver_12.1/server/lib/xqrl.jar
+.+
PATH=/home/robin/bin/wls/wlserver_12.1/server/bin:/home/robin/bin/wls/modules/org.apache.ant_1.7.1/bin:/home/robin/bin/wls/jdk160_29/jre/bin:/home/robin/bin/wls/jdk160_29/bin:/usr/local/bin:/usr/bin:/bin:/opt/bin:/usr/x86_64-pc-linux-gnu/gcc-bin/4.5.3:/usr/games/bin
+.+
+* To start WebLogic Server, use a username and *+
+* password assigned to an admin-level user. For *+
+* server administration, use the WebLogic Server *+
+* console at http://hostname:port/console *+
starting weblogic with Java version:
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Java HotSpot(TM) Client VM (build 20.4-b02, mixed mode)
Starting WLS with line:
+/home/robin/bin/wls/jdk160_29/bin/java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=DefaultServer -Djava.security.policy=/home/robin/bin/wls/wlserver_12.1/server/lib/weblogic.policy -Djavax.net.ssl.trustStore=/tmp/trustStore7618453572230021232.jks -Dhttp.proxyHost=emea-proxy.uk.oracle.com -Dhttp.proxyPort=80 -Dhttp.nonProxyHosts=localhost|localhost.localdomain|127.0.0.1|::1|MUELLER-BADY-GENTOO|MUELLER-BADY-GENTOO -Dhttps.proxyHost=emea-proxy.uk.oracle.com -Dhttps.proxyPort=80 -Doracle.jdeveloper.adrs=true -Dweblogic.nodemanager.ServiceEnabled=true -Xverify:none -Djava.endorsed.dirs=/home/robin/bin/wls/jdk160_29/jre/lib/endorsed:/home/robin/bin/wls/wlserver_12.1/endorsed -da -Dplatform.home=/home/robin/bin/wls/wlserver_12.1 -Dwls.home=/home/robin/bin/wls/wlserver_12.1/server -Dweblogic.home=/home/robin/bin/wls/wlserver_12.1/server -Djps.app.credential.overwrite.allowed=true -Dcommon.components.home=/home/robin/bin/wls/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain -Djrockit.optfile=/home/robin/bin/wls/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/servers/DefaultServer -Doracle.domain.config.dir=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig -Digf.arisidbeans.carmlloc=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/carml -Digf.arisidstack.home=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/servers/DefaultServer/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/home/robin/bin/wls/oracle_common/modules/oracle.ossoiap_11.1.1,/home/robin/bin/wls/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dwsm.repository.path=/home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/oracle/store/gmds -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/home/robin/bin/wls/patch_wls1211/profiles/default/sysext_manifest_classpath:/home/robin/bin/wls/patch_oepe100/profiles/default/sysext_manifest_classpath:/home/robin/bin/wls/patch_ocp371/profiles/default/sysext_manifest_classpath weblogic.Server+
+<Feb 10, 2012 11:30:09 AM CET> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>+
+<Feb 10, 2012 11:30:10 AM CET> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>+
+<Feb 10, 2012 11:30:11 AM CET> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 20.4-b02 from Sun Microsystems Inc..>+
+<Feb 10, 2012 11:30:12 AM CET> <Info> <Management> <BEA-141107> <Version: WebLogic Server 12.1.1.0 Wed Dec 7 08:40:57 PST 2011 1445491 >+
+<Feb 10, 2012 11:30:15 AM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING.>+
+<Feb 10, 2012 11:30:15 AM CET> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool.>+
+<Feb 10, 2012 11:30:15 AM CET> <Notice> <Log Management> <BEA-170019> <The server log file /home/robin/.jdeveloper/system11.1.2.1.38.60.81/DefaultDomain/servers/DefaultServer/logs/DefaultServer.log is opened. All server side log events will be written to this file.>+
Feb 10, 2012 11:30:24 AM oracle.security.jps.internal.keystore.file.FileKeyStoreManager saveKeyStore
WARNING: Failed to save farm keystore. Reason {0}
Feb 10, 2012 11:30:24 AM oracle.security.jps.internal.keystore.file.FileKeyStoreManager createKeyStore
WARNING: Failed to save farm keystore. Reason {0}
oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06513: Failed to save farm keystore. Reason
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.createKeyStore(FileKeyStoreManager.java:309)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:95)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:73)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:63)+
+ at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)+
+ at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:64)+
+ at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)+
+ at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:170)+
+ at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.getContext(ContextFactoryImpl.java:191)+
+ at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:132)+
+ at oracle.security.jps.internal.core.runtime.JpsContextFactoryImpl.getContext(JpsContextFactoryImpl.java:127)+
+ at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:850)+
+ at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:844)+
+ at java.security.AccessController.doPrivileged(Native Method)+
+ at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+ at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+ at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)+
+ at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)+
+ at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)+
+ at java.lang.reflect.Constructor.newInstance(Constructor.java:513)+
+ at java.lang.Class.newInstance0(Class.java:355)+
+ at java.lang.Class.newInstance(Class.java:308)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1343)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)+
+ at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)+
+ at weblogic.security.SecurityService.start(SecurityService.java:148)+
+ at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)+
+ at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)+
+ at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)+
+<Feb 10, 2012 11:30:24 AM CET> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider>+
+<Feb 10, 2012 11:30:24 AM CET> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)+
+ at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)+
+ at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)+
+ at weblogic.security.SecurityService.start(SecurityService.java:148)+
+ at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)+
+ Truncated. see log file for complete stacktrace+
+Caused By: oracle.security.jps.JpsRuntimeException: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:293)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+ at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+ at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)+
+ at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)+
+ Truncated. see log file for complete stacktrace+
+Caused By: oracle.security.jps.JpsException: [PolicyUtil] Exception while getting default policy Provider+
+ at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:899)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+ at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+ at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)+
+ Truncated. see log file for complete stacktrace+
+Caused By: java.security.PrivilegedActionException: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!+
+ at java.security.AccessController.doPrivileged(Native Method)+
+ at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:284)+
+ at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:270)+
+ Truncated. see log file for complete stacktrace+
+Caused By: oracle.security.jps.JpsException: [PolicyUtil] Unable to obtain default JPS Context!+
+ at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:860)+
+ at oracle.security.jps.internal.policystore.PolicyUtil$1.run(PolicyUtil.java:844)+
+ at java.security.AccessController.doPrivileged(Native Method)+
+ at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPolicyStore(PolicyUtil.java:844)+
+ at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:291)+
+ Truncated. see log file for complete stacktrace+
Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06513: Failed to save farm keystore. Reason
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.createKeyStore(FileKeyStoreManager.java:309)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:95)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:73)+
+ at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:63)+
+ at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)+
+ Truncated. see log file for complete stacktrace+
+>+
+<Feb 10, 2012 11:30:24 AM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED.>+
+<Feb 10, 2012 11:30:24 AM CET> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down.>+
+<Feb 10, 2012 11:30:24 AM CET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN.>+
Process exited.
*/LOG*
After that, I tried setting permissions for the cwallet.sso file to ugo+rwx, but this leads to the same problems as mentioned above.
My second try was to setup an external WLS 12c, but it seems to be not yet possible to connect to a WLS 12c from within jDeveloper.
Do you have any ideas ?
Thank you in advance for your help.
Regards,
RobinAfter debugging the WLS Initialisation with jdb, I recognized that there was some trouble with dependent libraries.
In the end, I solved my problem by using another OS (Ubuntu 11.10) for development. There, the WLS works out of the box, even with 64-Bit libraries.
Thank you for your help.
Regards,
Robin -
SAP Crystal Reports data source connection problem using sap business one
Hi,
I m facing a problem regarding: SAP Crystal Reports data source connection problem using sap business one
I am trying to create a Crystal report but when I try to configure a new connection it does not work.
I select Sap Business One data source and try to complete the information required to connection but it does not list my companies databases, what is the problem?
Our Current SAP related software details are as follows:
OS: Windows Server 2008
SAP B1 Version: SAP B1 9 (902001) Patch 9
SAP Crystal Report Version: 14.0.4.738 RTM
Database: MS SQL Server 2008 R2
I have also added some screenshots of the issues.
Please have a look and let me know if you have any questions or any further clarifications.
I m eagerly waiting for a quick and positive reply.Hi,
There is problem with SAP Business One date source.
I had faced same problem, I used OLEDB Data-source, and it worked fine for me.
So, try to use OLEDB.
Regards,
Amrut Sabnis.
Maybe you are looking for
-
I mistakenly pressed CTRL + another key (possibly V or B or N or whatever), when I was reading my e-mail. The text size shrank to a size that is useless to me, but I cannot seem to get the text size re-set to normal. Indeed all of the formatting on t
-
HT2494 New Macbook pro retina (haswell)
I have the new macbook pro retina, I have been into the sound settings to switch my input on headphone/built in mic to line in but the option is not there?
-
How do I get my phone off OFFLINE???
My Nokia 6210 is on offline and i can't find a way to get it back online. Can anyone help??
-
Supplier Invoice with Items without Purchasing
Hi We would like to know if we want to import supplier invoices with items and there is no Purchasing module. How items would be validated. Can this be done through item validation org and if yes, what setups are required and in which module. Regards
-
Why did my contacts vanish when I downloaded iso 5
When I updated the phone my contacts all were gone. 15 years of people.