FAX sending from ABAP programming

Hello All,
i have a program which sends PO PDF as FAX. When i execute the program i could see an entry in transaction SCOT as waiting but if i try to execute that i get a database termination message. The message says 'No delivery to 009180<FAX no>, as recipient unknown'
Could you please help me in resolving this issue.
Regards
Sachi

Hi,
Check with your basis team to find if the configuration settings required are correct or not.
KR Jaideep,

Similar Messages

Sending an email to users from abap program

Hi experts ,
How to send an email to users from abap program ...
i need full coding please..so that i can copy and paste it in my program.
Thank you in advance.
Rajasekhar.P

Hi Venkat
check the below simple code to convert spool to HTML and email it
data: list type table of abaplist with header line.
data: htmllines type table of w3html with header line.
data: maildata   like sodocchgi1.
data: mailtxt    like solisti1 occurs 10 with header line.
data: mailrec    like somlrec90 occurs 0 with header line.
start-of-selection.
Produce a list
do 100 times.
    write:/ sy-index, at 30 sy-index, at 50 sy-index.
enddo.
Save the list
call function 'SAVE_LIST'
       tables
            listobject         = list
       exceptions
            list_index_invalid = 1
            others             = 2.
Convert the list
call function 'WWW_LIST_TO_HTML'
       tables
            html = htmllines.
Send mail
maildata-obj_name = 'TEST'.
maildata-obj_descr = 'Test Subject'.
loop at htmllines.
    mailtxt = htmllines.
    append mailtxt.
endloop.
mailrec-receiver = '[email protected]'.
mailrec-rec_type = 'U'.
append mailrec.
call function 'SO_NEW_DOCUMENT_SEND_API1'
       exporting
            document_data              = maildata
            document_type              = 'HTM'
            put_in_outbox              = 'X'
       tables
            object_header              = mailtxt
            object_content             = mailtxt
            receivers                  = mailrec
       exceptions
            too_many_receivers         = 1
            document_not_sent          = 2
            document_type_not_exist    = 3
            operation_no_authorization = 4
            parameter_error            = 5
            x_error                    = 6
            enqueue_error              = 7
            others                     = 8.
if sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.

SMS from ABAP program to send error message

Hi,
I would like to know what are settings to be done in the system to send an SMS from ABAP program using FM 'SO_DOCUMENT_SEND_API1'.I was trying to send SMS using above FM but the error was "Cannot process message, no route from <userid> to <Mobile.no> ".
Pls let me know the pre requisites to send an SMS using above FM.
Regards,
Nivas

Hi,
I have gone thru this blog but I want send SMS to US Mobile no.I checked other webservice but it supports only few cellular networks in US.
any other alternate for this...
anyway thanks for your reply
Regards,
Nivas

Send BW query results as HTML email from ABAP program

I have published a code sample for sending BW query results as HTML email from ABAP program. if you have any questions or clarification, please post them here.
the same can be accessed from this link.
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b7658119-0a01-0010-39a9-b600c816f370
Regards
Raja
Message was edited by: Durairaj Athavan Raja

OK forget about my earlier post.
do the following changes.
declare the following variables:
data: xtext type standard table of solix .
DATA: atta_sub TYPE sood-objdes .
after the call of FM SCMS_STRING_TO_FTEXT add the following code.
CALL FUNCTION 'SO_SOLITAB_TO_SOLIXTAB'
EXPORTING
    ip_solitab        = text
IMPORTING
   EP_SOLIXTAB       = xtext .
and after the following statement
document = cl_document_bcs=>create_document(
                          i_type    = 'HTM'
                          i_text    = text
                          i_length = conlengths
                          i_subject = subject ).
add the following code
CALL METHOD document->add_attachment
            EXPORTING
              i_attachment_type    = 'htm'
              i_attachment_subject = atta_sub
              i_att_content_hex    = xtext.
now you will have results both in the body as well as attachment. (this is for test you can remove one of them )
Regards
Raja

Sending IDOCS from ABAP Program

hi friends,
           can we send IDOC ( of type MATMAS) form ABAP Program. if it possible how can we send, are there any function modules to do so....could any one tell me the procedure to accomplish the task...i have finished the configuration sting in both reciver and sender systems....just need to send material in form of IDOC from abap program.
( Note: not form BD10).
Thanks in advance,
Santosh.

Hi,
Follow this code it will help u...
This is for the user created IDOC but as u are making use of ur own basic type i.e., Idoc type MATMAS05
and u can write the code.
*& Report ZZ_Program_To_Create_Idoc
report zz_program_to_create_idoc                     .
tables: ekko,ekpo.
selection-screen skip 3.
selection-screen begin of block b1 with frame title titl.
selection-screen skip.
select-options s_ebeln for ekko-ebeln.
selection-screen skip.
selection-screen end of block b1.
data: header_segment_name like edidd-segnam value 'Z1EKKO',
      item_segment_name like edidd-segnam value 'Z1EKPO',
      idoc_name like edidc-idoctp value 'Z19838IDOC1'.
data: header_segment_data like z1ekko,
      item_segment_data like z1ekpo.
data: control_record like edidc.
data: messagetyp like edmsg-msgtyp value 'ZZ9838MESG1'.
data: i_communication like edidc occurs 0 with header line,
      i_data like edidd occurs 0 with header line.
data: begin of i_ekko occurs 0,
      ebeln like ekko-ebeln,
      aedat like ekko-aedat,
      bukrs like ekko-bukrs,
      bsart like ekko-bsart,
      lifnr like ekko-lifnr,
      end of i_ekko.
data: begin of i_ekpo occurs 0,
      ebelp like ekpo-ebelp,
      matnr like ekpo-matnr,
      menge like ekpo-menge,
      meins like ekpo-meins,
      netpr like ekpo-netpr,
      end of i_ekpo.
start-of-selection.
select ebeln aedat bukrs bsart lifnr from ekko
          into table i_ekko where ebeln in s_ebeln.
select ebelp
       matnr
       menge
       meins
       netpr
       from ekpo
       into table i_ekpo
       where ebeln in s_ebeln.
control_record-mestyp = messagetyp.
control_record-rcvprt = 'LS'.
control_record-idoctp = idoc_name.
control_record-rcvprn = '0MART800'.
loop at i_ekko.
header_segment_data-ebeln = i_ekko-ebeln.
header_segment_data-aedat = i_ekko-aedat.
header_segment_data-bukrs = i_ekko-bukrs.
header_segment_data-bsart = i_ekko-bsart.
header_segment_data-lifnr = i_ekko-lifnr.
i_data-segnam = header_segment_name.
i_data-sdata = header_segment_data.
append i_data.
select ebelp
       matnr
       menge
       meins
       netpr
       from ekpo
       into table i_ekpo
       where ebeln = i_ekko-ebeln.
loop at i_ekpo.
item_segment_data-ebelp = i_ekpo-ebelp.
item_segment_data-matnr = i_ekpo-matnr.
item_segment_data-menge = i_ekpo-menge.
item_segment_data-meins = i_ekpo-meins.
item_segment_data-netpr = i_ekpo-netpr.
i_data-segnam = item_segment_name.
i_data-sdata = item_segment_data.
append i_data.
endloop.
clear i_ekpo.
refresh i_ekpo.
endloop.
call function 'MASTER_IDOC_DISTRIBUTE'
exporting
    master_idoc_control                  = control_record
OBJ_TYPE                             = ''
CHNUM                                = ''
tables
    communication_idoc_control           = i_communication
    master_idoc_data                     = i_data
exceptions
   error_in_idoc_control                = 1
   error_writing_idoc_status            = 2
   error_in_idoc_data                   = 3
   sending_logical_system_unknown       = 4
   others                               = 5
if sy-subrc <> 0.
message id sy-msgid type sy-msgty number sy-msgno
         with sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
else.
loop at i_communication.
    write: 'IDOC GENERATED', i_communication-docnum.
endloop.
commit work.
endif.
initialization.
titl = 'ENTER THE PURCHASE ORDER NUMBER'.

Sending emails from ABAP program

Hi,
I need to send error emails from ABAP program.
I have to pass error internal table as text (not as attachment) in the email.
Can anybody supply any sample code?
Thanks in advance.
Regards,
Arun Mohan

HI,
See if this code helps:
***Sending mail to the receipients
if not it_final[] is initial.
Populate table with detaisl to be entered into .xls file
PERFORM BUILD_XLS_DATA_TABLE.
PERFORM POPULATE_EMAIL_MESSAGE_BODY.
Send file by email as .xls speadsheet
PERFORM SEND_FILE_AS_EMAIL_ATTACHMENT
TABLES IT_MESSAGE
IT_ATTACH
USING P_EMAIL
'Sales Register Report - Set Top Box / Accessories'
'XLS'
'SSTB'
CHANGING GD_ERROR
GD_RECIEVER.
Instructs mail send program for SAPCONNECT to send email(rsconn01)
PERFORM INITIATE_MAIL_EXECUTE_PROGRAM.
endif.
*& Form BUILD_XLS_DATA_TABLE
text
--> p1 text
<-- p2 text
FORM BUILD_XLS_DATA_TABLE .
data: wa_itab like it_final.
CONSTANTS:
CON_TAB TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB,
CON_CRET TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>CR_LF.
CONCATENATE 'Business Place' 'Region Code' 'Region' 'Branch Code'
'Branch' 'Material Desc' 'Area off Code'
'Area Name' 'Zone code' 'Zone Name' 'Cust No' 'Cust Name'
'Bill Doc No' 'Bill Date' 'Base Val' 'Total Val' 'Quantity'
INTO IT_ATTACH SEPARATED BY CON_TAB.
CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
LOOP AT IT_FINAL INTO WA_ITAB.
CONCATENATE WA_ITAB-BUSINESS_PLACE
WA_ITAB-KVGR1
WA_ITAB-REGION
WA_ITAB-VKBUR
WA_ITAB-SALES_OFF
WA_ITAB-ARKTX
WA_ITAB-vkgrp
WA_ITAB-sales_grp
WA_ITAB-bzirk
WA_ITAB-zone
WA_ITAB-kunnr
WA_ITAB-name
WA_ITAB-vbeln
WA_ITAB-fkdat
WA_ITAB-base_value
WA_ITAB-total_value
WA_ITAB-fkimg
INTO IT_ATTACH SEPARATED BY CON_TAB.
CONCATENATE CON_CRET IT_ATTACH INTO IT_ATTACH.
APPEND IT_ATTACH.
ENDLOOP.
ENDFORM. " BUILD_XLS_DATA_TABLE
*& Form POPULATE_EMAIL_MESSAGE_BODY
text
--> p1 text
<-- p2 text
FORM POPULATE_EMAIL_MESSAGE_BODY .
REFRESH IT_MESSAGE.
CONCATENATE SY-DATUM6(2) '/' SY-DATUM4(2) '/' SY-DATUM+0(4) INTO G_DATE.
IT_MESSAGE = 'Please find attached excel sheet.'.
APPEND IT_MESSAGE.
IT_MESSAGE = 'Sales Register Report - Set Top Box / Accessories'.
APPEND IT_MESSAGE.
Concatenate 'Report generated date' ':' G_Date '.' into IT_MESSAGE.
APPEND IT_MESSAGE.
clear it_message.
append it_message.
IT_MESSAGE = 'This is an autogenerated mail, please do not reply'.
APPEND IT_MESSAGE.
ENDFORM. " POPULATE_EMAIL_MESSAGE_BODY
*& Form SEND_FILE_AS_EMAIL_ATTACHMENT
Send email
FORM SEND_FILE_AS_EMAIL_ATTACHMENT TABLES PIT_MESSAGE
PIT_ATTACH
USING P_EMAIL
P_MTITLE
P_FORMAT
P_FILENAME
P_ATTDESCRIPTION
P_SENDER_ADDRESS
P_SENDER_ADDRES_TYPE
CHANGING P_ERROR
P_RECIEVER.
DATA: LD_ERROR TYPE SY-SUBRC,
LD_RECIEVER TYPE SY-SUBRC,
LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
LD_EMAIL LIKE SOMLRECI1-RECEIVER,
LD_FORMAT TYPE SO_OBJ_TP ,
LD_ATTDESCRIPTION TYPE SO_OBJ_NAM ,
LD_ATTFILENAME TYPE SO_OBJ_DES ,
LD_SENDER_ADDRESS LIKE SOEXTRECI1-RECEIVER,
LD_SENDER_ADDRESS_TYPE LIKE SOEXTRECI1-ADR_TYP,
LD_RECEIVER LIKE SY-SUBRC.
LD_EMAIL = P_EMAIL.
LD_MTITLE = P_MTITLE.
LD_FORMAT = P_FORMAT.
LD_ATTDESCRIPTION = P_ATTDESCRIPTION.
LD_ATTFILENAME = P_FILENAME.
LD_SENDER_ADDRESS = P_SENDER_ADDRESS.
LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
Fill the document data.
W_DOC_DATA-DOC_SIZE = 1.
Populate the subject/generic message attributes
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
W_DOC_DATA-SENSITIVTY = 'F'.
Fill the document data and get size of attachment
CLEAR W_DOC_DATA.
READ TABLE IT_ATTACH INDEX W_CNT.
W_DOC_DATA-DOC_SIZE =
( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
W_DOC_DATA-OBJ_LANGU = SY-LANGU.
W_DOC_DATA-OBJ_NAME = 'SAPRPT'.
W_DOC_DATA-OBJ_DESCR = LD_MTITLE.
W_DOC_DATA-SENSITIVTY = 'F'.
CLEAR T_ATTACHMENT.
REFRESH T_ATTACHMENT.
T_ATTACHMENT[] = PIT_ATTACH[].
Describe the body of the message
CLEAR T_PACKING_LIST.
REFRESH T_PACKING_LIST.
T_PACKING_LIST-TRANSF_BIN = SPACE.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 0.
T_PACKING_LIST-BODY_START = 1.
T_PACKING_LIST-OBJ_NAME = 'stb'.
DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = 'RAW'.
APPEND T_PACKING_LIST.
Create attachment notification
T_PACKING_LIST-TRANSF_BIN = 'X'.
T_PACKING_LIST-HEAD_START = 1.
T_PACKING_LIST-HEAD_NUM = 1.
T_PACKING_LIST-BODY_START = 1.
DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
T_PACKING_LIST-DOC_TYPE = LD_FORMAT.
T_PACKING_LIST-DOC_TYPE = 'XLS'.
T_PACKING_LIST-OBJ_DESCR = LD_ATTDESCRIPTION.
T_PACKING_LIST-OBJ_DESCR = 'Sales_STB'.
T_PACKING_LIST-OBJ_NAME = LD_ATTFILENAME.
T_PACKING_LIST-OBJ_NAME = 'stb'.
T_PACKING_LIST-DOC_SIZE = T_PACKING_LIST-BODY_NUM * 255.
APPEND T_PACKING_LIST.
Add the recipients email address
CLEAR T_RECEIVERS.
REFRESH T_RECEIVERS.
LOOP AT IT_RECV.
T_RECEIVERS-RECEIVER = IT_RECV-EMAIL.
T_RECEIVERS-REC_TYPE = 'U'.
T_RECEIVERS-COM_TYPE = 'INT'.
T_RECEIVERS-COPY = 'X'.
T_RECEIVERS-NOTIF_DEL = 'X'.
T_RECEIVERS-NOTIF_NDEL = 'X'.
APPEND T_RECEIVERS.
ENDLOOP.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
DOCUMENT_DATA = W_DOC_DATA
PUT_IN_OUTBOX = 'X'
SENDER_ADDRESS = LD_SENDER_ADDRESS
SENDER_ADDRESS_TYPE = LD_SENDER_ADDRESS_TYPE
COMMIT_WORK = 'X'
IMPORTING
SENT_TO_ALL = W_SENT_ALL
TABLES
PACKING_LIST = T_PACKING_LIST
CONTENTS_BIN = T_ATTACHMENT
CONTENTS_TXT = IT_MESSAGE
RECEIVERS = T_RECEIVERS
EXCEPTIONS
TOO_MANY_RECEIVERS = 1
DOCUMENT_NOT_SENT = 2
DOCUMENT_TYPE_NOT_EXIST = 3
OPERATION_NO_AUTHORIZATION = 4
PARAMETER_ERROR = 5
X_ERROR = 6
ENQUEUE_ERROR = 7
OTHERS = 8.
Populate zerror return code
LD_ERROR = SY-SUBRC.
Populate zreceiver return code
LOOP AT T_RECEIVERS.
LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
ENDLOOP.
ENDFORM. "SEND_FILE_AS_EMAIL_ATTACHMENT
*& Form INITIATE_MAIL_EXECUTE_PROGRAM
text
--> p1 text
<-- p2 text
FORM INITIATE_MAIL_EXECUTE_PROGRAM .
WAIT UP TO 2 SECONDS.
SUBMIT RSCONN01 WITH MODE = 'INT'
WITH OUTPUT = ''
AND RETURN.
ENDFORM. " INITIATE_MAIL_EXECUTE_PROGRAM
Regards
Subramanian

Sending EMAIL from ABAP Program Configuration+Code(Step by step)

Dear All,
Please anybody can provide me Step by Step document for sending Email from ABAP Program.
Thanks,
RP

Not an appropriate forum. Try ABAP forum.
Regards,
Jai Shankar

XML files from ABAP programs

Hi everyone!
Is there a way in ABAP to output XML files? Pls. send code/ function module if any.
From ABAP programs, we are sure that we can output TEXT files, but how about XML files?
The significance of this question is related
Currently we are using XI to interface SAP and AMS, this question for ABAP to produce XML file arose, if for example, the XI server is down and we have to still send data from one system to another. IDocs can also produce XML files, pls confirm. Earlier however, we have preferred XI rather than IDocs to do this. Anyway, any idea regarding this scenario will be greatly appreciated.
Thanks and God bless!
Celeste

Hi,
Please check this sample codes from other thread.
1. itab --- > xml
xml ---> itab.
2. This program will do both.
(just copy paste in new program)
3.
REPORT abc.
*-------------- DATA
DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.
DATA : BEGIN OF itab OCCURS 0,
a(100) TYPE c,
END OF itab.
DATA: xml_out TYPE string .
DATA : BEGIN OF upl OCCURS 0,
f(255) TYPE c,
END OF upl.
DATA: xmlupl TYPE string .
******************************* FIRST PHASE
******************************* FIRST PHASE
******************************* FIRST PHASE
*------------------ Fetch Data
SELECT * FROM t001 INTO TABLE t001.
*------------------- XML
CALL TRANSFORMATION ('ID')
SOURCE tab = t001[]
RESULT XML xml_out.
CALL FUNCTION 'SCMS_STRING_TO_FTEXT'
EXPORTING
TEXT = xml_out
* IMPORTING
* LENGTH =
TABLES
FTEXT_TAB = itab.
*-------------- Download
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filetype = 'BIN'
filename = 'd:xx.xml'
TABLES
data_tab = itab.
******************************* SECOND PHASE
******************************* SECOND PHASE
******************************* SECOND PHASE
BREAK-POINT.
REFRESH t001.
CLEAR t001.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'D:XX.XML'
filetype = 'BIN'
TABLES
data_tab = upl.
LOOP AT upl.
CONCATENATE xmlupl upl-f INTO xmlupl.
ENDLOOP.
*------------------- XML
CALL TRANSFORMATION ('ID')
SOURCE XML xmlupl
RESULT tab = t001[]
BREAK-POINT.
Regards,
Ferry Lianto

Call to Java web service from abap program

HI,
I want to call to Java WS from abap program and i read some post how to do that in release of NW 6.4 but I want to know what is the simplest way to do that in release 7.0 .
Many Thanks,
Nina

Hi Uwe,
Thank you.
I have WSDL or URL how i can call to them ,in the example that you send i don't find the place that it called.
Do i have to create proxy for that ?
BR
Nina

To post a mail from ABAP program

dear friends
              how to post a mail to SAP inbox of a particular user from ABAP program.

get the spool no of the program
we have standard program rstxpdf4 through that convert it to pdf
and through f.m SO_NEW_DOCUMENT_ATT_SEND_API1 u can send mail.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
   EXPORTING
     DOCUMENT_DATA                    = x_document_data
     PUT_IN_OUTBOX                    = 'X'
     COMMIT_WORK                      = 'X'
   TABLES
     PACKING_LIST                     = it_packing_list
     CONTENTS_BIN                     = it_contents_bin
     CONTENTS_TXT                     = it_contents_txt
     RECEIVERS                        = it_receivers
EXCEPTIONS
    TOO_MANY_RECEIVERS               = 1
    DOCUMENT_NOT_SENT                = 2
    DOCUMENT_TYPE_NOT_EXIST          = 3
    OPERATION_NO_AUTHORIZATION       = 4
    PARAMETER_ERROR                  = 5
    X_ERROR                          = 6
    ENQUEUE_ERROR                    = 7
    OTHERS                           = 8 .
IF SY-SUBRC <> 0.
   retcode = sy-subrc.
   perform protocol_update.
else .

How i can acces to web ( with login) from abap program?

Hello.
I need to acces to web that have user/password from abap program. Is there any function to do this?
And, is it possible, to do this in background process?
Regards.
Antonio.

Hi Antonio,
Yes this is possible. Check out class cl_http_client, particularly method IF_HTTP_CLIENT~AUTHENTICATE in which you can provide the user credentials. Here's some example code:
DATA: client    TYPE REF TO if_http_client,
             l_url       TYPE string,
             l_content TYPE string.
CALL METHOD cl_http_client=>create_by_url
EXPORTING
    url    = l_url
IMPORTING
    client = client
EXCEPTIONS
    OTHERS = 1.
client->request->set_header_field( name = '~request_method'
                                   value = 'GET' ).        "#EC *
CALL METHOD client->authenticate
EXPORTING
*    proxy_authentication = ' '
*    client               =
    username             = 'user'
    password             = 'password'
*    language             =
****Make the call
client->send( ).
****Receive the Response Object
CALL METHOD client->receive
EXCEPTIONS
    http_communication_failure = 1
    http_invalid_state         = 2
    http_processing_failed     = 3
    OTHERS                     = 4.
****Get the response content in Character format
l_content = client->response->get_cdata( ).
Hope this helps you!
Cheers, Roel

Calling external web service from ABAP Program

Hi All,
Can somebody point me to the documentation where how to call an external (3rd party) web service from ABAP program is explained?
Thanks & Regards,
-Smita

which version of R/3 you are using. if you are on was 6.40 its very simple, there are delivered tools to generate client proxy for consuming webservice. if you are on wa 6.20 you can use cl_http_client to achieve the same. check out the following weblogs.
/people/durairaj.athavanraja/blog/2005/07/12/send-sms-to-india-from-abap
/people/thomas.jung3/blog/2005/05/13/calling-webservices-from-abap-via-https
/people/thomas.jung3/blog/2004/11/17/bsp-a-developers-journal-part-xiv--consuming-webservices-with-abap
Regards
Raja

Is it possible to call website from ABAP Program?

Hi Experts,
       Is it possible to call website from ABAP Program?
It is very Urgent Help me.
Regards,
Ashok.

Hi,
Check the following program:
REPORT ZURL NO STANDARD PAGE HEADING.
DATA: BEGIN OF URL_TABLE OCCURS 10,
L(25),
END OF URL_TABLE.
URL_TABLE-L = 'http://www.lycos.com'.APPEND URL_TABLE.
URL_TABLE-L = 'http://www.hotbot.com'.APPEND URL_TABLE.
URL_TABLE-L = 'http://www.sap.com'.APPEND URL_TABLE.
LOOP AT URL_TABLE.
SKIP. FORMAT INTENSIFIED OFF.
WRITE: / 'Single click on '.
FORMAT HOTSPOT ON.FORMAT INTENSIFIED ON.
WRITE: URL_TABLE. HIDE URL_TABLE.
FORMAT HOTSPOT OFF.FORMAT INTENSIFIED OFF.
WRITE: 'to go to', URL_TABLE.
ENDLOOP.
CLEAR URL_TABLE.
AT LINE-SELECTION.
IF NOT URL_TABLE IS INITIAL.
CALL FUNCTION 'WS_EXECUTE'
       EXPORTING
            program = 'C:\Program Files\Internet Explorer\IEXPLORE.EXE'
            commandline     = URL_TABLE
            INFORM         = ''
          EXCEPTIONS
            PROG_NOT_FOUND = 1.
IF SY-SUBRC <> 0.
     WRITE:/ 'Cannot find program to open Internet'.
ENDIF.
ENDIF.
Regards,
Bhaskar

Call SXPG _ CALL _ SYSTEM from ABAP program

Hi,
Someone may help me? I need to call the function module SXPG _ CALL _ SYSTEM from ABAP program for to encrypt a file.
I created the command by SM49 , but I don't know how I can call it from ABAP program.
Thanks
Maria C

Hi Maria.
This is a possible code you can use:
DATA: log LIKE TABLE OF btcxpm WITH HEADER LINE.
Can contain STDOUT, STDERR
commandname =
CALL FUNCTION SXPG_CALL_SYSTEM
IMPORTING
COMMANDNAME = commandname
PARAMETERS = parameters
EXPORTING
STATUS = status
TABLES
EXEC_PROTOCOL = log
EXCEPTIONS
NO_PERMISSION = 1
COMMAND_NOT_FOUND = 2
PARAMETERS_TOO_LONG = 3
SECURITY_RISK = 4
WRONG_CHECK_CALL_INTERFACE = 5
PROGRAM_START_ERROR = 6
PROGRAM_TERMINATION_ERROR = 7
X_ERROR = 8
PARAMETER_EXPECTED = 9
TOO_MANY_PARAMETERS = 10
ILLEGAL_COMMAND = 11
OTHERS = 12.
The following are the comments of the parameters taken from:
http://help.sap.com/saphelp_40b/helpdata/en/fa/0971ee543b11d1898e0000e8322d00/content.htm
Parameters
IMPORTING Parameters
Parameter name
Use
COMMANDNAME
The name of the definition of the external command, as specified in the maintenance function (transaction SM69).
PARAMETERS
Arguments for the external command as specified by the definition in the R/3 System and by the calling program or user.
These arguments are checked for impermissible characters, such as the ; under UNIX. Problems are registered with the SECURITY_RISK exception.
EXPORTING Parameters
Parameter name
Use
STATUS
Returns the final status of the execution of the external command:
· Value O: The external command was started and ran to end successfully.
· Value E: An error occurred; the external command was not run successfully.
Tables Parameters
Parameter name
Use
EXEC_PROTOCOL
Contains the STDOUT and STDERR output of the external command and any output from the target host system.
Exceptions
Exception name
Meaning
X_ERROR
Reserved for future use.
NO_PERMISSION
The AUTHORITY-CHECK of the users authorization for the authorization object S_LOG_COM failed. The user is not authorized to carry out the command named with the specified arguments on the target system.
COMMAND_NOT_FOUND
Command name, as identified by COMMANDNAME and OPERATINGSYSTEM, has not been defined in the maintenance function (transaction SM69).
PARAMETERS_TOO_LONG
The combined argument string (ADDITIONAL_PARAMETERS and the DEFINED_PARAMETERS, as returned in ALL_PARAMETERS) exceeds the limit of 128 characters in length.
SECURITY_RISK
Either:
· The command contains impermissible characters. These are characters with potentially dangerous properties, such as ; under UNIX.
· The command definition specifies that an extra-check function module be run. This function module has rejected execution of the command.
WRONG_CHECK_CALL_
INTERFACE
The command definition specifies that an extra-check function module is to be run. Either this function module is missing, or the interface defined for this function module does not match that of the standard R/3 function module SXPG_DUMMY_COMMAND_CHECK. For more information, please see SXPG_DUMMY_COMMAND_CHECK: Interface for Extra-Check Function Modules.
TOO_MANY_PARAMETERS
The command definition specifies that user-specified arguments for the external command are not allowed. However, an additional string of command arguments was specified.
PARAMETER_EXPECTED
The command definition includes the placeholder character ?, which signifies that additional user-defined arguments are required. However, no additional arguments string was supplied.
PROGRAM_START_ERROR
An error occurred while starting the external command. The R/3 system field SY-MSGV1 contains additional information on the problem.
PROGRAM_TERMINATION_
ERROR
An error occurred while trying to obtain the return code of the external program. The R/3 system field SY-MSGV1 contains additional information on the problem.
ILLEGAL_COMMAND
The external command definition was modified "illegally". That is, the command was not modified by means of the maintenance function (transaction SM69).
The modified command is registered in the system log in its substituted form. The message is registered under the system log ID "LC".
OTHERS
Catch any new exceptions added to this function module.
Hope this will be useful.
Sandro Lombardo

Call workflow from ABAP program

created a zbusiness object (ZPRODH)with
one key field product hierarchy,
one attribute level number and
one method display.
I tested that zobject and using this object created workflow to display product hierarchy ,it is displaying it. now I have to call it from one abap program.
In the abap program I am calling the funcion module, I
CALL FUNCTION 'SWW_WI_START_SIMPLE'
EXPORTING
TASK = TASK
IMPORTING
WI_ID = WI_ID
TABLES
AGENTS = AGENTS
WI_CONTAINER = WI_CONTAINER.
It is calling the workflow and subrc is 0, but not passing the value to the workflow. Because of that the method is not working, any idea?
Thanks in advance

ttpa,
Please check this thread:
Re: Workflow from abap program
Also check that your Fm do requires any explicit commit or not?
Hope it will help u
Cheers
Jai

FAX sending from ABAP programming

Similar Messages

Maybe you are looking for