Fax Solution for ECC 6.0

Hi all,
I've an SAP ECC 6.0 and I'd like to send fax from my SAP system.
I can use SAPCONNECT with SMTP plug-in to route the fax to the MAIL SERVER.
Now I'd like to know which Fax Server product I can use.
The Fax Server must be certified by SAP?
thanks in advanced.
Moreno

service.sap.com/notes
OSS note: 9119

Similar Messages

W.R.T OSS NOTE 339780-Is there a solution for ECC 6.0

Hi all experts,
We are having the same problem as mentioned in this OSS note .And there is a solution also but its only valid for 4.6c not for the latest versions.I'm requesting the experts to help me find a solution for ECC 6.0 .Pls let me know if dont have access to SAP notes i can send it to you .Thanks
Naik

below is the note.......
31.10.2007 Page 1 of 2
Note 339780 - Characteristic that refers to a table field is not updated
Note Language: English Version: 1 Validity: Valid from 08.12.2001
Summary
Symptom
If a batch is characterized with a characteristic that refers to
a table field, and this table field is derived or changed during
derivation, shipping approval or monitor (e.g. ZUSCH), the corresponding
characteristic is not updated.
Additional key words
DRVSA
DRVMO
derivation
ZUSCH
Cause and prerequisites
The problem is caused by a programming error.
Solution
Apply the following source code corrections.
Source code corrections
Header Data
Release Status: Released for Customer
Released on: 12.10.2000 22:00:00
Priority: Correction with low priority
Category: Program error
Main Component LO-BM-SA Shipping Approval
Additional Components:
LO-BM-DRV Derivation
The note is not release-dependent.
Support Packages

Release notes or information on WTY solution for ECC 6.0

Our company is upgrading from 4.7 to ECC 6.0 and we have WTY functionality implemented. I am looking for release notes on the WTY solution or upgrade information and can't locate anything. Does anyone know where I can get any information on this solution?

Hi,
In order to apply EHP4 you need solution manager 7.0 on SP15 at least while it is recommended to have solution manager on SP17 or more.
And I think it is possible to install solman on 32 bit platforms.
Thanks
Sunny

Web solution for ECC 6.0

hi,
i would like to know if all functionality of ECC 6 can be acceded from the EP and without SAP GUI for windows
In another term my question is :if ECC 6 is full web application ?
Thank you for your answer
Mohamed Karray

Well you can use the WebGUI instead of the SAP GUI - you will need to activate the service through SICF though. Then you build simple Transaction iViews but choose the SAP GUI for HTML in the properties of the iView.
Bye,
Sameer

Make your own Fax Server with Automator! (Pagesender solution for Mavericks)

I have been scouring these discussion boards for some time now looking for a suitable substitute to PageSender, an awesome fax solution for the Mac from SmileOnMyMac LLC, which for some inexplicable reason stopped development and updates after OS 10.6.8. The result is that many small business office users who still rely on fax (and yes...no matter what they tell you, most of the business world DOES still use fax because it's legally binding and more secure than email for the transmission of legal documents or healthcare records, and does not rely on database integration accross different systems, which is sadly but very realistically still a long ways off), and no longer have a way to integrate faxes into a paperless or digital workflow office system.
I suspect like many folks who receive faxes, those who used PageSender, used a very powerful feature to forward faxes by email, thereby turning your Mac into a Fax server that could distribute your faxes to other workstations and staff throughout the business via email. Presumably, if you have your own email server (Exchange, Kerio, AppleMail server, PostFix enabler etc.) you could distribute faxes on your own internal network, securely behind a firewall, and effectively create a digitial/paperless workflow for your faxes.
Even if you have a USB modem or multifunction printer that allows you to recieve a Fax to your desktop (Apple's internal fax via printer preferences, and some HP models like the HP MFP 127fw) for example will allow you to recieve a Fax to a desktop folder or forward to a single email address. But the former is of limited functionaliy and the later only lets you send to an email address out over the internet with a registered public domain, which means you give up all control of privacy and means you can't process it through a private mail server to create a digital workflow for your office...
...Until now!!!
I am happy to report that I have finally discovered a very easy and useable feature that will save a lot of time, money, and headaches for those looking to create a digital workflow and fax server system for a small office system. (I don't think there is any limit to scale here, but I suspect offices with more than 10 employees probably have a BizHub, or HP MFP/digital sender that can create the same process directly from the printer, but of course these come with a price tag of $2000 and up...).
To accomplish this however, you will need some basic requirements which are as follows:
1) A USB modem from either US Robotics or Zoom Modem. These are readily available from Amazon, MacMall or any number of other online vendors and work very well and seemlessly with all Macs running OSX right up through Mavericks
OR
A Multifunction printer that is capable of receiving faxes to a desktop Mac like the HP 127 fw. Other models exist from other manufacturers as well, but you will have to do a bit of research and probably check with the vendor or user manual directly to confirm that Fax to desktop is supported for Mac and OS 10.9.
2) A dedicated Mail Server (MSFT Exchange, Kerio, MacOSX server with mail server enabled, or PostFix enalber or MailServe from Cutedge Systems)
You will need to set up an email account on your server that is the parent for all incoming faxes from which the faxes will be sent out as part of your digital workflow. This is beyond the scope of this discussion but if you've come this far and you're still reading, you probably know how to do this already. I recommend setting this up as a POP account, not IMAP. This way, the attatchments (your faxes) will always remain on your server as a back up, until you delete them from the server.
3) Now simply go to System preferences and select "Printers and Scanners". Select either the Fax printer for your multifunction printer, or add a fax printer/reviever using the + button and select "Fax" if you are using a USB modem. You must have the USB modem attatched to the computer in order to use the built-in Apple Fax feature for the latter option.
4) Now click on the receive options. Select "Recieve faxes to this computer" and set your ring answer settings. Check "Save to" and select the designated folder (either Faxes or Shared Faxes on your computer) or create a new folder. Depending on the volume of faxes, and your back up systems, you may want to designate a separate folder on a separate drive, exclusively for your Faxes. This is where all your faxes will be stored.
5) Now launch "Automator" in your applications folder and create a new workflow. You will be presented with several options. Select "Folder Action".
6) At the top right of the window space you will see "Folder Action receives files and folders added to" . Select the Fax folder you created in step 4.
7)On the left hand side of the "Actions" menu select "Mail"
8) From the list of actions select "New Mail Message" this will take the latest Fax added to your Fax folder and attach it as a PDF to a new outgoing mail. In the "TO" address put the email address that belongs to the parent account your created for the Faxes on your mail server eg. [email protected]. In the subject field you can put "Fax Workflow" or any other generic subject that will identify to all reciptients that this is an email that contains a Fax/PDF attatchment.
Under "account" use the SMTP account you set up on your mail server to handle the routing of internal emails. In most cases, this will be the same as the parent account created above. (Effectively, this account is sending and receiving emails to itself).
9) From the list of actions, select "Send outgoing messages".
10) Save the Automator workflow with a name like "FaxDistribution" or "FaxFlow".
11) Go back to the Fax folder you created in step 4. Right click or option click on the folder and scroll down the options menu and select "Folder Actions Setup". You will see a list of scripts including the Automator workflow you just created. Choose it.
That's it!! From now on, when you get a fax, it will get dumped into the designated fax folder, and this will automatically trigger the workflow to atttach and send it as an email to anyone in your office that is set up to receive emails with the "faxserver" address. You now have a paperless fax digital workflow server system for distributing your faxes digitally to anyone in your office who needs to review your faxes. Good luck!

Thank you for this interesting posting.

How to set up fax solution using Windows 2008 R2 Fax server role and Exchange 2007

Hello,
I don't know if this is the right forum to post this but since it is related to Exchange I thought it might be. If this is not the right place, please direct me to the forum where my post would be more appropriate.
I'm looking to set up a Fax solution for the company that I work for as we are moving away from analog phone lines to VoIP using SIP. My original thought was to set up a Windows 2008 R2 server with Fax server role installed and have it route the fax message
to Exchange 2007 SP3 so the fax message can be delivered to each user's inbox. I was reading a little bit on the Windows Fax server role and from what I saw it looks like it can only route fax messages to one email address. This not ideal for my company. Is
there a way to have the fax server role route the email to each user's inbox? If so, how can I achieve this?
How can implement this for this sending outgoing faxes as well?
I don't know if this releveant or not but I will be using Asterisk as a media gateway between our SIP trunks and the Windows Fax server.
Any help is appreciated. Thanks!

Please find the below url for the complete Fax configuration in Exchange 2007 Unified Messaging
http://blogs.technet.com/b/exchange/archive/2007/04/18/3401950.aspx
The article is so easy to understand with detail procedure and guideliness
Exchange Queries

Is it a must to use Solution manager for ECC 6.0 upgrade

Is it a must to use Solution Manager for ECC 6.0 (FICO & HR) upgrade? I am told Solution Manager is required only if it has ABAP and JAVA stacks, or involves Enhancement Packages; and could be optional if it is only ECC 6.0 with ABAP stacks.

Hi,
I'm having a difficult time finding some guidance for setting up our R/3 Enterprise system in solman properly, so that I can create the upgrade XML file required to go directly to ERP 6.0 EHP4.
I've set up the R/3 system fine, but when i create a maintenance transaction i cannot for the life of me figure out how to tell it I want to go from r/3 to ERP6 ehp4.
Any docs out there for this?
Thanks!
I figured it out... i had to add the R/3 Enterprise logical components to my system landscape. After that I was able to select R/3 as the initial data in the maintenance transaction and then the system i wanted to upgrade, and then the option to upgrade.
Never mind!
Edited by: Tom Janes on Sep 9, 2009 12:52 AM

FAX Solution... but not expensive

Hi,
we are look for a FAX solution not expensive (such as TOPCALL, FACSys, RightFAX, ecc.) to send fax from a ECC 6.0 system used by few user.
Have you got any advice?
Regards.

Hi,
We are using Esker Delivery Ware for Faxing from ECC Servers
It can send or receive faxes
but based on the total number of users and your budget, you can decide the same

Cannot load a FAx driver for a Hp Laserjet 1536dnf MFP on a HP Pavilion Elite e9220y Computer

I cannot find a fax driver for this printer to install on my computer.
I have uninstalled and reinstalled the printer a couple of times It will print and scan but not fax.
I reinstalled fron the orignal disk and off the HP website neither get me fax capablilites.
I have gone to support and cannot find the drive on eith er the printer or computers web page at HP.Com
Please let me know what to do.

Hi @thesaneone4 ,
I see that you are experiencing issues with the fax driver not installing. I would be happy to help you.
Check the connections in the Device Manager for any printer entries, under Universal Serial Bus Controllers look for Fax LEDM or any unknown devices. Right click and try to update the driver. How do I get into Windows Device Manager?
In the Devices and Printers window, what icons do you have for the printer showing?
If you are still having issues, you will need to uninstall the printer software from the CD and unlock the hidden Admin Account when installing the printer software, to make sure there isn't any interference.
Disconnect the USB cable.
Uninstall the software by going to Start, Computer, right click on the CD and open it, then double click on uninstall.
Then download and run the latest software. HP LaserJet Pro M1536dnf Multifunction Printer.
Unlock Hidden Administrator Account and install the printer on this account:
Go to your Start menu and under the 'search programs and files' box type CMD.
CMD will populate as a search option above, just right click on it and 'run as administrator'.
Once CMD (Command Prompt) opens, type net user administrator /active:yes and hit enter.
Next, close CMD and restart your computer.
When your computer comes on log into the new account that should show. It will be called Administrator and will not have a password on it.
If your computer automatically logs into your account after restart than go to your start menu click the arrow beside 'shutdown' and choose 'switch user'. Now log into the Administrator account we just unlocked.
Under the Administrator account, install the printer software.
Test the printer.
To turn off the Admin account start back at step 1 and type in net user administrator /active:no.
Please let me know the outcome.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Solution for printing of Purchasing Documents in SAP with version managemen

Hi experts,
We found that the standard solution does not meet the following requirements for purchasing document
1)     The print for the latest version of the document does not contain items unaffected by change. It requires printing of whole document with all items, but with version number and highlighted changes.
2)     The standard solution cannot highlight some of the changes which are not captured by version management like text changes, target value and Contact (Purchasing Group) in header, text changes at item level, etc.
3)     The standard solution can be used to reprint the whole PO without version management but that cannot highlight the changes specific to the version for which it is printed.
If any solution which can meet the requirements specified above, please let us know <removed by moderator>.
Thanks in advance.
Edited by: Thomas Zloch on Mar 30, 2011 9:39 AM

Ok.
I have already done with SPRO configuration.
MM->Purchasing->Version management->
It has implemented ECC 6.0. The version management has been activated for Purchasing documents. The standard printing solution for printing of these documents (PO, Outline Agreements and RFQ) print these documents with changes made in the latest version. Any item which is not changed in the latest version does not get printed.

RE : Fax Solution

Hi,
We had a similar problem, it was not fax but was e-mail. We were
developing e-mail enabled Forte apps and we wanted to communicate with
MAPI( Messaging API of Microsoft). The way we achieved this was by
wrapping the MAPI in a C/C++ DLL and interfacing the DLL's exported
functions with Forte. Microsoft also provides Mapi.dll and Mapi32.dll
which can be programatically loaded from within a C/C++ program and
different functions exported by the DLL called independently.
I'm not sure if there are any externally callable DLLs for
Microsoft Fax services.( like MAPI32.dll for messaging services). If
there is one, you could use the same approach.
Hope this helps
Ajith Kallambella M.
Forte Systems Engineer,
International Business Corporation.
From: Tae Soon (Ted) Park[SMTP:[email protected]]
Reply To: Tae Soon (Ted) Park
Sent: Thursday, February 26, 1998 5:53 PM
To: [email protected]
Subject: Fax solution
Hi,
We are trying to send faxes from our Forte application.
The problem with using Microsoft fax is that we cannot
find a way to transfer information from our Forte Application
to the Microsoft fax program. Can anyone have suggestions
as to how we can transfer information, such as the customer's
phone number, to the Microsoft fax program and get a return
value that indicates the success of the fax delivery.
Would appreciate commments.
TaeSoon Park
=====================================================================
TaeSoon (Ted) Park 24, Ogum-dong, Songpa-gu
Manager, Technical Architect Seoul, Korea (138-130)
Tong Yang Systemhouse Tel: 822-405-7773 (B)
Project Support Team 822-3770-3432 (B)
[email protected] Fax: 822-402-6183
=====================================================================
Ajith Kallambella M.
Forte Systems Engineer,
Internationational Business Corporation.

Hi,
We had a similar problem, it was not fax but was e-mail. We were
developing e-mail enabled Forte apps and we wanted to communicate with
MAPI( Messaging API of Microsoft). The way we achieved this was by
wrapping the MAPI in a C/C++ DLL and interfacing the DLL's exported
functions with Forte. Microsoft also provides Mapi.dll and Mapi32.dll
which can be programatically loaded from within a C/C++ program and
different functions exported by the DLL called independently.
I'm not sure if there are any externally callable DLLs for
Microsoft Fax services.( like MAPI32.dll for messaging services). If
there is one, you could use the same approach.
Hope this helps
Ajith Kallambella M.
Forte Systems Engineer,
Internationational Business Corporation.
From: Tae Soon (Ted) Park[SMTP:[email protected]]
Reply To: Tae Soon (Ted) Park
Sent: Thursday, February 26, 1998 5:53 PM
To: [email protected]
Subject: Fax solution
Hi,
We are trying to send faxes from our Forte application.
The problem with using Microsoft fax is that we cannot
find a way to transfer information from our Forte Application
to the Microsoft fax program. Can anyone have suggestions
as to how we can transfer information, such as the customer's
phone number, to the Microsoft fax program and get a return
value that indicates the success of the fax delivery.
Would appreciate commments.
TaeSoon Park
=====================================================================
TaeSoon (Ted) Park 24, Ogum-dong, Songpa-gu
Manager, Technical Architect Seoul, Korea (138-130)
Tong Yang Systemhouse Tel: 822-405-7773 (B)
Project Support Team 822-3770-3432 (B)
[email protected] Fax: 822-402-6183
=====================================================================

EHP3 for ECC 6.0 available?

Where can I find EHP3 for ECC 6.0 ?
I went to the marketplace and just found EHP2 and guides for installing EHP3 but not the add-on itself.
Please advice.
Thanks!

Hi,
EhPs sould be downloaded (incl the latest Support Packages) via the Maintenance Optimizer (part of Solution Manager 4.0).
More information you can find in the Must Know Guide:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/e05fd110-6e08-2b10-a4bf-b2fd1efceeda
Best regards,
Christian.

Difference between SAP/APO/DP and the SAP/CRM solution for forecasting

Hi,
Can you please help me identifying the main differences between SAP/APO/DP and the SAP/CRM solution for forecasting? Advantages and disadvantages?
Thanks a lot

Hi LCD777,
Forecasting at DP & CRM are altogether at different entities. CRM involves webbased data transfer mechanism tool whereas DP is database/livecache driven tool.
In CRM, you dont get optimised solution of forecasting out of it whereas in DP you can get as much as
optimised solution & flexibility as per your requirements.
DP is majorly a forecasting tool where in huge statistical method functionalities are embedded in
whereas CRM is majorly a transactional tool wherein it involves gathering of forecast data and executing it.
Typically, CRM will be integrated with DP containing GATP environment & ECC so that DP will plan for forecast data, ECC system drives sales order data & GATP calls for availability check and finally
the forecast execution& transactions will be controlled by CRM
Regards
R. Senthil Mareeswaran.

Is there a solution for graphs that do not translate from Excel to PDF?

We are working on an Excel Spreadsheet with graphs but when we create a PDF of the sheet the graph does not contain the ledger or values. Is there a solution to this problem. We have tried both printing to PDF and exporting to PDF.

Just a note: If you want to print the PDF to paper, it may still not print correctly even though it looks correct on the PDF document- the printed graph may flow off of the paper sheet. When you click Print, a print dialog box opens with some options and a preview. If the preview does not look correct, change the size option to "Shrink oversized pages".
Jeffry Calhoun
Workforce Analytics Manager
Ohio Department of Job & Family Services
P.O. Box 1618, Columbus, OH 43216-1618
InterAgency: F376, 4020 E. 5th Avenue
614-644-0564
Fax 614-728-5938
[email protected]
OhioMeansJobs.com -
The next best thing to having an HR department.
OhioMeansJobs.com -
Ohio's premier website for connecting businesses and job seekers - quickly, easily, and for free!
>>> alscud <[email protected]> 4/9/2012 9:34 PM >>>
Re: Is there a solution for graphs that do not translate from Excel to PDF? created by alscud ( http://forums.adobe.com/people/alscud ) in Creating, Editing & Exporting PDFs - View the full discussion ( http://forums.adobe.com/message/4323530#4323530 )
Thank you Lori for your help your suggestion works!
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4323530#4323530
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4323530#4323530. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Creating, Editing & Exporting PDFs by email ( mailto:discussions-community-acrobat-creating__editing_%[email protected] ) or at Adobe Forums ( http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerType=14&contain er=4697 )
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.
Ohio Means Jobs
You're looking for something unique. Use more than an ordinary site.
http://www.ohiomeansjobs.com
This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain private, confidential, and/or privileged information. Any unauthorized review, use, disclosure, or distribution is prohibited. If you are not the intended recipient, employee, or agent responsible for delivering this message, please contact the sender by reply e-mail and destroy all copies of the original e-mail message.

Pre-configured Solution for Small And Medium Downstream Co's for Oil & Gas

Hello Experts,
Pl advise if we have Pre-configured Solution for Small And Medium Downstream Co's for Oil & Gas.?
Any link or material for reading, please let me know.
Background - We are working on the scope to finalise processes for Small And Medium Co's for Downstream business in ECC 6.0.
Also advise how many and what kind of processes are involved related to P2P, Order to Cash and Finance.
Regards
Vinod Chincholkar

Hi Vinod,
i hope you can find the details in this link,
you can download the sloution overview brochure...
http://www.sap.com/industries/oil-gas/small/index.epx.
Best Regards
Satish

Fax Solution for ECC 6.0

Similar Messages

Maybe you are looking for