Fax the Maintenance order to the person responsible to work center
Hello
The business requirement is that the maintenance order should be faxed to the person responsible for the main work center used in the maintenance order.
Please suggest any work around if possible.
Thanks for your reply.
Regards
Santosh
hello pete,
the business requirement is that i need to send the work order to the main work center of the order for which the fax no of the main work center will be populate automaticall at the time of or before clicking on print/fax order in iw32, in standard scenerio i can get the fax no from partner function but in this case i do not know how to map it.
regards,
Santosh
Similar Messages
-
Set as default value the Item Category in the Maintenance Order
Hello everyone,
We are trying to find a user exit in order to set as default value the item category in the Maintenance Order once the Material has been introduced (Tag Components).
SAP Customizing let the user set the Item Category automatically per Material Type, but we need to set different Item Categories to materials belonging to the same material type.
We would really appreciate any help relating this issue.
Thank you very much,
Víctor LiedoDear Paul,
Thank you very much for your response.
I had already tried customizing mentioned by Pithan, but it did not work because we need to set different Item Categories for Materials with same Material Type.
We have been searching for exits which may let us set Item Category in the Maintenance Order, but it does not seem to be possible.
What you say about adding some custom validation through user exit, not to set item category as default value, but to check if the one entered is valid, sounds the best way of achieving our commitments.
I have tried to look for CNEX0037 & CNEX0038, by using transactions SE37 and SE38, search for programs and functions modules, but it did not work. Could you please tell us what kind of objects are?
Thank you very much in advance.
Víctor Liedo -
Budget Process (Linked the maintenance Order into Internal Order) in EAM
Dear Experts,
Scenario for Repair & Maintenance with only MM & FICO module live w.e.f. 2007 (PM not live)
Process Managed thru Internal Order (Order Type: RPMT)
Budget managed through Investment Management (IM); Budget is directly entered against the IO using transaction IM52
Scenario for Repair & Maintenance with only MM, FICO & PM module live (PM went live in 2010)
It was proposed to assign budget against each Maintenance Order. Since the number of maintenance orders being used is very high, it was decided to link the MO & IO so that budget will be assigned to the IO and when the MO is settled against the IO, the budget in IO can be deducted accordingly. The proposed process to assign budget in Internal Order against each Maintenance Order are given below-:
1.) In EAM process one can plan/procure material and External Services only when the Maintenance Order is created & released but practically it has to be planned long before any Maintenance Activity (Maintenance Order to be linked with the estimate so that PO can be created against the estimate).
2.) The no. of Maintenance Order generated in EAM Module is very large as Maintenance order is created for almost each and every maintenance activity. It is cumbersome to allocate the budget to each and every maintenance order. There should be a single estimate for maintenance activity (as in MM module) and that should be linked to maintenance order so that the actual cost of Indent/Service Entry Sheet can be deducted automatically from the estimate (Maintenance Order is to be linked with estimate).
3.) While doing return Indent the cost of return material is not being added to the maintenance order automatically (Maintenance Order is to be linked with estimate).
4.) If Material & External Services not planned in the maintenance order (estimate), the user must be able to do that through Internal Order (estimate), hence the Internal Order must be link to the Maintenance Order. They should able to record the planned & actual cost in the maintenance Order.
Process followed:
1.) Created Internal Order in KO01 for Repair & Maintenance Order Type
Assigned budget to Internal Order thru IM52
2.) Created PM order and assigned Internal order against Settlement Order in tab
u2018Locationu2019 and in Settlement Rule with 100%. In this Section attach the Internal
Order with selection type u2018ORDu2019.
3.) Released both orders and issue the Material for particular Operation and then
determine the Cost for material .After that performed MIGO for consumption of
materials.
4.) Settled the PM order in KO88.
Settlement process was successfully saved.
Problem faced:
After posting the goods movement (against each Maintenance Order) and settlement of the maintenance order against IO, we still find the budget assigned to the IO is not consumed/deducted.
1. Actual cost of maintenance is not reflected in the internal order
immediately. We have to run cost settlement (t-code KO88) for the
maintenance order each time the actual cost is incurred in the maintenance order.
2. Also in the case of return indent, the value of returned material is not directly
added to the available budget of internal order.
3. When the material is issued from store through the reservation generated by
maintenance order, system does not check for budget in the internal
order/maintenance order while issuing material from the store.
4. It must not be allowed to create reservation from the internal order of order type
RPMT.
5. In case of external service in the maintenance order, the unit of
measure in the requisition is set to u201CD (days)u201D by default. System does not allow
changing the unit of measure in the requisition (it should allow to change the unit
of measure or set the unit of measure u201CJOBu201D).
6.) When the material is issued from the store through reservation generated in
maintenance order, system does not check for budget in Internal Order
(estimate)/Maintenance Order while issuing material from store.
Thanks & Regards
Deepak SoniHi,
1. Actual cost of maintenance is not reflected in the internal order
immediately. We have to run cost settlement (t-code KO88) for the
maintenance order each time the actual cost is incurred in the maintenance order.
As per the standard system budgeting is done against the actual cost only. And until you settle your order the actual cost from
maint order are not getting transfered to IO. Once they are transfered system is checking for the budget.
2. Also in the case of return indent, the value of returned material is not directly added to the available budget of internal order.
This is similar to first point, when you return goods there will be negative cost on the order, this has to be settled until that system will not compare the IO budget with maintenance order actual cost.
3. When the material is issued from store through the reservation generated by maintenance order, system does not check for budget in the internal order/maintenance order while issuing material from the store.
The budget you have assigned is at IO, how can system will check the budget while issueing goods for maintenance order. We may have to develop or use some user exit over here. Which will trigger checking of budget from the settlement receiver IO for that maintenance order.
I think you may have to go for development. These are my observations from my experience.
Regards,
NNR -
Reg. Capacity levelling for the maintenance order
Hi all,
I am using SAP R3 ECC6.0.
I have created a maintenance order with order type PM01(Internal).In this order i have assigned Work Center 1 with the Work center category as Labour.And i have assigned 2 operations for this Work center in the maintenance order with the total hours of 60 HRS. and i saved this order & made the status to release.
Then i went to Tcode CM33 and there i inputed the Work center name and executed it.It opens a Graphical View.But in that view my order no is not displayed .Previous order no. which is there already for that Work center is shown there.
What could be the Reason.
As an alternate checking i went to T code CM31 order view.There i Inputed my order no. and executed it but it throws a message
"No Capacity requirements were found in the evaluation period"
"No work centers or orders were found"
What could be the reason.
Tell me how to overcome this issue.
More over i want to make dispatch in the capacity levelling.
Thanks in advance,
M.Badrinarain.hi badri,
are you checking in the same period ? and next check ur overall profile and time profile assigned to ur overall profile .... u will find order no , operation no .... and once u dispatch operation status gets DSPT .
regards
pushpa -
How to check, when the Maintenance Order was deleted
Hello Experts,
Can you please tell me of how to check for the maintenance order that when it was deleted and who has deleted that.
If any T-Code is there or at the Table level also to check the requirement.
Regards,
Yawar KhanIf you want to track when you have put deletion flag, you can track it using above mentioned techniques.
If you archived (deleted) permanently, then using archival history only, you can check I guess.
Check these links. While deleting maintenance order, we can hisorical order with same number. Using that creation date, you can track.
http://help.sap.com/saphelp_nw04/helpdata/en/8d/3e6552462a11d189000000e8323d3a/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/8d/3e4d2f462a11d189000000e8323d3a/frameset.htm -
Set deletion flag in the maintenance order
Hi all,
Am not able to set the deletion flag from the maintenance order, the :set: button is not active. can anyone help me in this regards?
Or is there any tcode for setting deletion flag to maintenance orders?
Thanks
Anishhi
i think it is probably authorization issue ie you don't have the authorization to put the deletion flag
or check whether you have technically completed the order ,if not try to TECO and then try
regards
thyagarajan -
Problem in maintaining the settlement rule in the maintenance order
Dear Friends,
I have a problem ,When I am trying to maintain the settlement rule in the maintenance order ,I am getting information like below
Decentralized system -> note settlement rule is not distributed
Message no. /ISDFPS/PM124
Diagnosis
You navigated to the settlement rule.
System Response
The system informs you that a settlement rule can be created but that it will not be distributed to the target system. Settlement is carried out in the target system, where the order is usually settled to the WBS element of the operation.
Can anyone throw some light on how this is happeing and remedy?
Appreciating your early responseHello
Please check
TC --> KSR2_ORC
Please maintain the Strategy Sequences for Automatic Generation of Settlement Rule.
You define a strategy sequence for automatic generation of settlement rules for internal orders.
Regards,
Rakesh
Edited by: RAKESH ASHOK MANE on Sep 3, 2010 12:37 PM -
Buisness completion of the maintenance order?
Hello friends,
can someone please explain the "BUISNESS COMLETION" of the maintenance order,
though we do the technical completion of the maintenance order, but what is the significance of "BUISNESS COMPLETION"
please help................
regards and thanks in advance................
ykHi!
This will give you a better idea of business completion.
1. If system status is TECO, it means maintenance job is over, but it doesn't give you any idea whether entire cost is settled on cost receiver or not.
2. If system status is CLSD, it means settlement of cost is done, invoice verification is done.
Business completion is required because there is no indicator available to show whether entire cost is settled or not.
Now a question arises, why there is no indicator available to show whether cost is settlled on valid cost receiver or not?
Some times your maintenance job is going on and on even more than a month. At the month end you will settle the maintenance cost of the month on cost receiver. Now still there is lot of postings are left to be posted in future. Therefore you can't say that cost is settled on order (Therefore no indicator is available).
But there will be a time in future when entire cost of maintenance will be settled on maintenance order. At that time this is the business completion which will work as an indicato that cost is settled, invoice verifiation is done etc....
hope this may help you.
Regards,
Vaibhav Mishra -
How we can give the confirmation of the sales order to the customer.?
how we can give the confirmation of the sales order to the customer.?
after the we generate thge sales order how we will give the confirmation to the customer automatically or in any way in SAP SDA confirmation can be given to the Sold to party for the sales order by means of an output type, which is the most used functionality.
You can create an output which can be a word or PDF document, or an email , fax etc. Based on the kind of confirmation you want to give (Document, email, fax) do corresponding settings in the output for printers, email settings, fax settings etc. and enable this output to be triggered during sales order creation by assigning the output to output procedure for sales documents. This part of configuring an output is done by Functional team while the email, fax settings are done by basis team in combination with tech team.
The output should have a smartform and corresponding report program to populate the smartform. This part should be taken care of by the technical team.
Once all these things are done, if a sales order is created, the output will be triggered which will send a confirmation document, email , fax as per the configuration to the sold to party. If you want the confirmation to be send to more partner functions, that is also configurable in the output configuration.
Pls reward points if it helps. -
Using MS Access Web App, can you set the tab order of the fields on a form?
Using MS Access Web App, can you set the tab order of the fields on a form? Doesn't appear to be a property. I don't see a programmatic method. I saw someone suggest using goto control on the after update event trigger but what if the person
doesn't edit the field? No event would be fired.
JimHi Jim,
>>Using MS Access Web App, can you set the tab order of the fields on a form?
I am afraid you could not. In Web applications, the tab order is set automatically and cannot be changed.
(From
https://support.office.com/en-au/article/Set-the-tab-order-for-controls-3d7f749c-5a53-42b2-bb0e-2323fa044e2e)
>> I saw someone suggest using goto control on the after update event trigger but what if the person doesn't edit the field? No event would be fired.
The goto method is a workaround, but it should be triggered by a specific event. What I can figure out is changing the order of the fields.
If this is a feature you want to include in future versions of Access Web app, please submit a feedback as the picture below:
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Email of the Purchase Order to the User
Hi,
Currently, I am able to send the email of the purchase order to the vendor mail address, which is mentioned on general data tab of the vendor master.
In addition, the requirement is that the purchase order also to be emailed to the User, who has created it.
I have added the VU in NACE settings for application EF, output type NEU. The payment medium I have used is 5 (external send).
However, when I try to add the VU and the user name to the vendor master partner details tab, the system is not taking in.
Please let me know how can I email the purchase order to user.
Thanks in advance for your time.
Thanks,
RaviHi,
1) Add the user email address also in the vendor master.
2) Verify all settings in condition records.
3) Check tcode sost for any waiting send requests.
Regards,
BK -
In the report level user wants two persons against each work center.
Hi Experts,
Please let me know the solution, I have provided scenario below.
check the query which the user is referring to report:
Example
Work center Person
KNE33102 44003850
According to the user, the names for the Work centers should be as follows:
Work center Person
KNE33102 44003850,
KNE33102 44003603
I have check the data in T-code-CR03, each work center getting two persons, as can be shown below.
Work center Person
KNE33102 44003850,
KNE33102 44003603
In RSA3 it can be seen that both the records are being extracted
Work center Start date End date Person
KNE33102 09.02.2009 31.12.2009 44003850
KNE33102 09.02.2009 31.12.2009 44003603
In BI , when checking in PSA, it can be seen that the data is also being loaded to BI (Two persons loaded against Work center-KNE33102)
Work center Start date End date Person
KNE33102 09.02.2009 31.12.2009 44003850
KNE33102 09.02.2009 31.12.2009 44003603
But when loading to the Info Object, one person has deleted. Because of this, in the report level displaying one person.
Note:-Please let me know what is the procedure, in the report level user wants two persons against each work center.Hi,
As you said in your post the data has mentioned up to 2009. can you try execute the query till to date .
Regards
sivaraju -
Report (summary) to print in the same order as the PAYCHECK run.
Hi,
I have a requirement where an incentive pay summary by salesperson, will need to print in the same order as the checks that print for those salespersons.
Is this possible and if so, what is required to accomplish the above requirement?
Thank You,
JohnYou can't change them once they are in the Photos app. On iOS 5 the photos will be sorted by the photo's 'date modified' field (from here) - so you will need to modify that field on your photos before syncing to get them into your required order. Or you could consider using a third-party photo management app instead of the Photos app e.g. Photo Manager Pro which allows you to re-order photos directly within the app.
-
Is there a way to get the correct order from the dependent types of a sche
Hi ,
I have a CT facing the following problem:
When trying to built a SQL script to create all the object types within a schema using the DBMS_METADATA packages.
Did insert in a table the names of the types that will be exported following a concrete order, next loop into the table and call the DBMS_METADATA package for each row.
These type are depedent between them, there are some type attributes calling other types and here the issue
First : try to generate the order by created column of dba_objects and when the generated SQL script is launched a lot of type appearing as incomplete state due to the order isn't correct.
Second : try to insert the table ordering by object_id colums of dba_tables view, it appears incomplete types too.
Currently want to insert the table using a recursive query with connect by against the dba_type_attrs starting with the rows when ATTR_TYPE_NAME is not null (the types that are called by other types), but this way has a issue dificult to resolve: the roots of hierarchy are the rows when ATTR_TYPE_NAME is not null and we've dependencies between roots nodes
The question is is there a way to get the correct order from the dependent types of a schema?
Platform: IBM SP AIX
DB version: 9.2.0.7
Any help will be appreciated .
Thanks in advance.The xxx_dependencies view should give you the dependencies betwee nthe various types. I would look at something along the lines of:
SELECT object_name, referenced_name
FROM (SELECT o.object_name, d.referenced_name
FROM user_objects o, user_dependencies d
WHERE o.object_name = d.name(+) and
o.object_type = d.type(+) and
d.referenced_type(+) = 'TYPE' and
o.object_type = 'TYPE')
START WITH referenced_name IS NULL
CONNECT BY PRIOR object_name = referenced_nameThe outer join between user_objects and user_dependencies is required to generate the names of types which are not dependent on other types, or do not have other types dependent on them.
HTH
John -
How do I get the data in the CSV file to be in the same order as the form?
When I merge my data from multiple form submissions into a csv file, the data is completely out of order, which makes it pretty much useles. How can I make it export the data in the same order? Also, the headers of each column or garbled. For example:
Depth (mm) shows in excel as Depth__mm__aqWhxx1nhpwx*3sgoBx9UQ
Lesion Location with check boxes: Face, Scalp, Trunk shows as each individual: Lesion_Location_1_15w4B5z9Kg2FKrkCPa6Wvg or Lesion_Location_3_15w4B5z9Kg2FKrkCPa6Wvg.
What I want is for the data produced to be in the same order as the form and with the same headers.
Also, I created several help texts that don't appear in the form.
I'd be happy to upload any of the files (form template, form pdf, csv file) if there is a way to.
I used Adobe Forms Central to create the forms in Acrobat XI Pro. I'm on a windows 7 computer.
Thank you for your helpSome of this is just the way it is with a PDF form created with FormsCentral. The fields get those names to ensure that they are unique, since the FormsCentral designer app does not allow yo to specify the field names directly. A fixt would be to create the form in Acrobat and you can give the fields any name you want. You can also change the field names in Acrobat after first removing the usage rights from the PDF by selecting: File > Save a Copy
and renaming the fields to what you want. Also remove the submit button it added. You can then upload the edited PDF to FormsCentral and Distribute it. It looks as though the order of the fields in the table are alphabetical, so it you rename your fields so they will be in the order you want when arranged alphabetically (e.g., A1_Patient_ID, A2_Biopsy_Age, etc.), that might be an approach to take. Also, if this is for human patient data, check for regulatory compliance of this system. FormsCentral is specifically not HIPAA compliant as stated in the license agreement.
Maybe you are looking for
-
So one day my front facing camera decided to just not work. I tried the restore and everything possible, it's just frozen. Luckily the other camera works. Last week, I woke in the morning and used my phone like normal and I noticed it was so hot. I l
-
Printing multiplte customer details on seperate pages using Smartforms
Hi, I have a requirement where I have to accept the customer number using Select-options and display the customer details in seperate smartform pages. I applied the command in smartform giving the general attribute go to new page 'page1'. the details
-
Consignment purchase info record - no tax code found
Dear all I have faced one problem regarding the consignment purchase info records' tax code. When I go to create the consignment pur info record we couldn't find any values existed in the field tax code. However, if I go to change another plant, the
-
IDVD saved/Can I burn another copy???
Hello, Last week I created a iMovie and then burned it to iDVD. I saved the iDVD file and the iMovie file. Is it possible to burn another copy of that movie without all the encoding time? It runs 45 mintues and took hours. I also have TOAST 6 if that
-
Need help in inserting XML Documents as XMLType
I am using an XMLType column in one of my tables to store XML messages that come from a B2B application. My insert takes the form of: insert into mytable values( '100', 'unvalidated', 'final', XMLTYPE( 'The XML Message This has been working fine for