Faxes from the daily manager.

I have an OfficeJet 6500A, which I purchased in August 2011. I keep getting faxes from the Daily Manager, which I do not want to receive, but cannot figure out how to make it stop! Its wasting ink and paper and I do not want to get them anymore. Can you help me?

Hi ibed12,
here is a link for information on how to stop unwanted Scheduled Delivery:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/Unwanted-faxes-Print-Apps-Auto-Printing-Manage...
I was an HP employee.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

Similar Messages

How do I stop the daily manager

I would like to be able to stop the Daily Manager from printing everyday. Its a nusiance! The printer is a HP8600 Plus

Many HP printers are Web Enabled and can connect to the 'cloud' to receive content or ‘Print Apps’. These Print Apps can be setup to be delivered on a Scheduled Delivery schedule. Some customers are inadvertently signing up for this service and think that they are getting a fax or unwanted print app sent to their printer.
In order to remove the Schedule deliverym follow the steps below:
1. From the printers front panel go to the 'Apps' section and scroll through until you find the desired print app. Select the print app and then choose 'Pause' subscription. This will pause the subscription until a user selects it again and 'resumes' printing. If the print app is not visible on your printer it may have been removed, please go to method 2.
2. Go to www.hpeprintcenter.com and login to your account, create an account if necessary. Go to the 'Apps' section and select the desired print app. Select 'setup' and then 'update settings', at the bottom of the settings page you will see in blue text 'Cancel Scheduled Delivery'.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Cannot delete users from the Central Management Console

I cannot delete users from the Central Management Console. I'm logged in to Enterprise as administrator but still get the following error:
There was an error while writing data back to the server: Sorry, you do not have the right to 'Delete objects' (id - 22) for 'koberg' (id - 725415). Please contact your system or permissions administrator if you require this right.
Thanks in advance for any help on this matter.

Oops, my mistake, sorry. Ok, so the Administrator cannot delete user koberg.
Check top level:
Logon to CMC, browse to Home > Settings and select the Rights tab. These are your top level settings. Factory default will show only Administrators and Everyone. Select the Net Access "Advanced" for the Administrators group. NB: Do not select these group names links - they will jump you out of the top level! On the Advanced rights page, ensure the right to "Delete objects" is explicitly granted.
Then set for the Users top level folder:
In the CMC, browse to Home, and select Users. Select the "Rights" button. Again - NB: Do not select these group names links - they will jump you out of the Users top level folder! Set the Administrators group to "Full Control". Save.
That should be all you need. However, there is a possibility the previous admin was busy setting security not only at the account level, but on groups so we need to verify the user:
In the CMC, browse to Home, and select Users. In the User list, select koberg. In the koberg account page, select the Rights tab. If the Administrators is not set to (Inherited Rights), make it so, and when you select the "Update" button, you should see the Net Access update to "Full Control". If this is the case, you should follow these steps on each account and accomplish this.
And if you still can't delete it, verify the groups:
In the CMC, browse to Home, and select Users. In the User list, select koberg. In the koberg account page, select the "Member of" tab. Note all groups koberg is a member of. Then in the CMC, browse to Home, and select Groups. Select the name hyperlink for the group(s) that koberg belongs to. On the group page, select the Rights tab, and ensure the Administrators have (Inherited Rights) - Full Control on all of these, also. If not, set it.
Finally, I know you inherited this, but let's overview some basics of simplifying your deployment administration. Follow these guidelines, and your administration life will be so much easier.
1. The Everyone group should never have any subgroups. Ever. All accounts on the system are a member of the Everyone group. Adding subgroups to the Everyone group is redundant.
2. For simplicity's sake, Application level access should be set on the Adminstrators Group, and the Everyone group. I know there are customers who add groups to application rights. I don't understand why users would have an account on the system if they are not allowed access to InfoView, but it's your system.
3. From a report object perspective, the Everyone group should be set at the top level to "No Access". This will result in them having no rights on anything at all. You break this inheritance at the application level to give them access to InfoView and other apps. On folders and objects, you ADD groups, then assign (ADD) rights as desired.
4. If you can help it, never explicitly deny a right to any user or group for any object or application. Explicitly deny overrides any other setting. If a user belongs to group A and group B, and group A is explicitly denied a right, you can explicitly grant it for group B or the user all day long, and it will still be denied. Always try to put yourself in the position of adding groups/users, and adding rights, then inheriting as far down the folder tree as you can.

Multifunction Printer/Scanner/FAX machines and FAXing from the desktop.

I've got a Canon MP530 thanks to an Apple Bundle and after a lot of gyrations, it has come down to be that neither I, Canon, nor Apple can make this unit send or recieve FAXs from the desktop!
Apple seems to be "stunned" (better word than "clueless") about this lack of functionality. Canon's response is (literally) "Buy a PC."
I know I can do software that will let me FAX but but that is not an option at this point. I've got four machines who all can plug into the same printer/scanner/unit and there's no reason that this machine shouldn't be able to send a FAX for me.
So, I'm here posting this message wondering if anyone has purchased an "All-in-one" unit (preferably part of an Apple bundle) that supports printing from the computer, scanning to the computer, and FAXing to and from the computer and that they've actually used (themselves) and seen work.

Yes absolutely. I set it up last Fall and have been using it until last week, at whick time I lost wireless connectivity with router for no reason at all. I can not remember how to do it now and I am looking for the answer myself.
This link to an online chat on www.hp.com with a tech might help you.
http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-006&h_lang=en&h_cc=us&h_product=3204781&h_client=S-A...
I unfortunately upgraded my browser to IE8 last week and the chat support online does not support that browser. If you get an answer, I would appreciate it if you would post the answer on this thread so that I can re-learn it myself. Thanks. Good Luck.

Problem in sending Fax from the Output type - SAP Script

Hi Team,
I am facng a problem with SAP Script while sending the Fax from the output type. I am able to see the entire output in my outbox. But in the fax machine it is only printing the Main window. I checked with some other outputs which are using the Fax option, they are printing fine. Driver program is the Z program. Can anyone give me some Idea?
Regards,
Sasidhar

Hi Sasidhar,
Have you tried with different fax machine.
Regards,
Atish

Unable to determine Physical Disk from the VM manager : 3.2.1

Unable to determine Physical Disk from the VM manager :
OVM manager : 3.2.1.516
VM Server : Available disks on vm server
# fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 1 13 104391 83 Linux
/dev/sda2 14 405 3148740 83 Linux
/dev/sda3 406 536 1052257+ 82 Linux swap / Solaris
Disk /dev/sdb: 80.0 GB, 80000000000 bytes
255 heads, 63 sectors/track, 9726 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 13 104391 83 Linux
/dev/sdb2 14 9328 74822737+ 83 Linux
/dev/sdb3 9329 9459 1052257+ 82 Linux swap / Solaris
Disk /dev/dm-0: 80.0 GB, 80000000000 bytes
255 heads, 63 sectors/track, 9726 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/dm-0p1 * 1 13 104391 83 Linux
/dev/dm-0p2 14 9328 74822737+ 83 Linux
/dev/dm-0p3 9329 9459 1052257+ 82 Linux swap / Solaris
Disk /dev/dm-1: 106 MB, 106896384 bytes
255 heads, 63 sectors/track, 12 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
Disk /dev/dm-2: 76.6 GB, 76618483200 bytes
255 heads, 63 sectors/track, 9315 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/dm-2 doesn't contain a valid partition table
Disk /dev/dm-3: 1077 MB, 1077511680 bytes
255 heads, 63 sectors/track, 131 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk /dev/dm-3 doesn't contain a valid partition table
#

thanks for your prompt response.
I am aware of that we can't use any free spaces where the VM is installed.Hence the additional storage added to the server.
1. Install VM Server on 80GB HD ( /dev/sdb)
2. Later, i added 500GB to the storage ( no installation - just the disk ) ( /dev/sda)
Same configuration worked fine in 3.0, now i am not able to identified the additional disk which was added later with 3.2.1.

How to close Acrobat.exe from the task manager processes through plug-in?

I have a plug-in in which we have a functionality of defining some keys and they are displayed as annotations on the PDF. Now, if the user defines such a key, an annot (i.e.a rectangular box) gets displayed on the PDF and if the user does not click custom menu say 'Close Key' then annot remains visible on the PDF.
My problem is if in such a case i.e. the user has defined a key & if the user does not hit 'Close Key' and instead closes Acrobat by directly hitting close (i.e. [X] button at top right corner), then Acrobat exits; but the Acrobat.exe remains running in the Processes.
If the user tries to open the same PDF again then a message pops up saying 'Cannot open file for viewing as its already in use...'.
Note that any other PDF gets opened fine.
Could somebody help me in giving me any ideas/suggestions on this? I want to exit the acrobat.exe from the processes so that the same PDF could get opened. As described above, the cause is the key (annot) was opened and user abrubtly exited Acrobat. Is there a way, that we could catch this Acrobat exit event in the plug-in? That way, I'd be able to clear off the annot (key) and then close acrobat.
Please let me know asap.

Hey, tnx for ur response! But, the issue is reproducible on Acrobat 7.0 Professional.
I do have the 'WillClose' event registered in my plug-in. Below is the event that is wired up with 'WillClose' event:-
static
ACCB1 void ACCB2 NotifyAVWillClose (AVDoc doc, void *clientData){
UNREFERENCED_PARAMETER(clientData);
UNREFERENCED_PARAMETER(doc);
CloseTemplate(TRUE);
The 'CloseTemplate' method performs the closing of the annotation, clearing of objects and deleting the PDFfile class pointer.
And this all works fine with Acrobat.exe getting closed from the task manager processes in acrobat versions 8 & 9. However, in Acrobat 7.0, the process remains in the Task Manager.
Could you suggest any ideas on what else needs to be implemented to end the process in Acrobat 7?
Thanks!

Message (on one account) when logging in: The user account running the Configuration Manager console has insufficient permissions to read information from the Configuration Manager site database.

After installing the reportservice/database i cannot use the Configuration Manager Console 2012 anymore with my own AD account. (The accounts of my colleagues are stil working)
When i login i get the following message:
The user account running the Configuration Manager console has insufficient permissions to read information from the Configuration Manager site database. The account must belong to a security role in Configuration Manager. The account must also have
the Windows Server Distributed Component Object Model (DCOM) Remote Activation permission for the computer running the Configuration Manager site server and the SMS Provider.
I checked the following:
I am a administrative user in SCCM (Full Administrator)
I am a member of the administrator group on the server
Deleted HKEY_CURRENT_USER\Software\Microsoft\ConfigMgr10
I tried to start it on multiple workstations and deleted my roaming profile
Any more suggestions?

Hi,
Maybe you could have a look on the below blog.
http://blog.nimbo.com/how-to-disable-user-account-control-in-windows-server-2012/
(Note: Microsoft provides third-party contact information to help you find technical support. This contact information
may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.)
Best Regards,
Joyce Li
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Is it possible to run a group solve from the batch manager?

I'd like to know if it is possible to run a group solve defined in OFA 11i that contains solve and copy data from the batch manager.
Thank you
Luigi Polverini
Synesis s.r.l.
null

Problem: I have a Perl script in my AIR App's install directory that needs executable permissions on a Mac.
Solution: Chmod the file in my AIR App.
My code looks something like the following:
if (Capabilities.os.indexOf("Mac OS") > -1) {
                    var dlFile:File = File.userDirectory;
                    var _chmod:File = new File("/bin/bash");
                    dlFile = new File(file);
                    var nativeProcess:NativeProcess = new NativeProcess();
                    var chmodStartupInfo:NativeProcessStartupInfo = new NativeProcessStartupInfo();
                    chmodStartupInfo.executable = _chmod;
                    var args:Vector.<String> = new Vector.<String>();
                    args.push("-c");
                     // Trace so I can make sure the command and path are correct in the debugger
                    trace ("\"chmod ugo+x '"+dlFile.nativePath+"'\"");
                    args.push("chmod ugo+x '"+dlFile.nativePath+"'");
                    chmodStartupInfo.arguments = args;
                    nativeProcess.addEventListener(NativeProcessExitEvent.EXIT, onExitError );
                    chmodStartupInfo.executable = new File(file);
                    var process:NativeProcess = new NativeProcess();
                    process.start(chmodStartupInfo);
I really hope this helps someone else.

How do i get the daily manager to stop printing

apparently when i set up my new printer i accidentally requested the "daily manager" to print. But i don't want this to print. how do I stop it.

Hi karenflo22,
I am sorry to hear you are having issues with the Daily Manager print app, but I will be happy to help you with this. When you log into ePrint Center, does the Daily Manager app show up under the "My Print Apps" heading on the page?
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

The Daily Manager App

The Daily Manager App keeps printing to my printer even though I never signed up for this. I want it to stop printing.
Please help
This question was solved.
View Solution.

Hi nancydog,
I have edited the post above yours.
The correct name of the App on your printer is Manager Tools (not The Daily Manager).
You may need to scroll to the right through the Apps screens to find the screen with Manager Tools.
If you still can't find it, try solution 2 or solution 3 on the following website:
www.hp.com/go/manageprint
JamieAtHP
I work on behalf of HP.

SCVMM Virtual Switch Provisioning ignores "Inherit settings from the physical management adapter" setting

When provisioning a new Hyper-V hosting into SCVMM I have a situation occur that causes loss of management to the server, which really should not be happening. When I add a new host, I set the 'Virtual Switch' adding a new 'Logical Switch' as well as a 'Virtual
Network Adapter' for the management OS traffic.
The first NIC in the team is active and configured with correct static IP information, which is allowing VMM access to the server to perform these steps. The 'Virtual Network Adapter' has a checkbox in the 'This virtual network adapter inherits settings
from the physical management adapter.' option box.
From my understanding what should happen is when the virtual adapter is created on the host the IP information should move to the virtual adapter from the physical adapter that is now part of the NIC Team. What is actually happening is the NIC Team seems
to create OK, but it picks up a DHCP IP address instead of assuming the first physical NIC's IP information. I tried this with only one NIC as well as both NICs in the team to see what happens. Either case the same problem presents.
To get around this, what I did was sit on the console after I started the provisioning process. As soon as I saw Teamed NIC create I applied the static IP address via PowerShell manually to that Teamed NIC virtual adapter and then VMM just continued along
normally. It then moving the IP from the NIC Team adapter to the Hyper-V virtual adapter properly. I did get a warning back from the creation (below) which hints me to the problem.
The Error code details as 2147942465 which is a "Network Access Denied" code followed by "Error while applying physical adapter network settings to teamed adapter". So, this is telling me there was a permission issue of some sort during
the step of adding the original physical NIC IP settings to the virtual NIC.
The VMM Run As user 'HVAdmin' is a Local Administrator on the Hyper-V host, this has been verified. It has also been temporarily granted Administrator access on the domain to see if it helps. No go.
Searching around the net has now revealed this problem so far, has anyone else seen this? It makes provisioning a bit of a chore because I have to be at the Hyper-V console and on VMM at the exact same time to add a new host.

It's a workaround but this works best.
When initially configuring the host use a dedicated Nic.
Configure the new team with a management Vnic and assign the Vnic an IP.
Now disable the dedicated nic and you can start working the the team and the Vnic.
Gil Gross | Technical Lead | G-Net Network Solutions | www.g-net.co.il | plz visit my blog - gilgrossblog.wordpress.com

Reg: Excluding one day from the daily schedule process chain

Hi All,
I have a process chain scheduled daily except Sunday i.e. from Monday to Saturday. Now i want to exclude Saturday from the daily scheduling.
Any idea how we can do that. Early response will be highly appreciated.
Best regards

Hi,
Restrict chain Scheduling on Sundays/Holidays
Create a factory calender using TCode SCAL or ask your basis team to create one.
In this calender mark all days except the day you dont want the chain to run as workday.
Now while scheduling the process chain make use of this calender and restrict it to run only on the workdays.
There is a setting in the start process of the PC by which your chain wont run in sundays/holidays based on calendar or run only on workdays as defined in the factory calendar.
Go to PC > start process > change selection > Date/time. Here enter the date from which the chain should be scheduled and then click the Restrictions button at the bottom. There u can check the option "Dont execute job on sundays or holidays.
Hope this helps.
Thanks,
JituK

Passing memory settings from the Node Manager to the Managed Server

All,
I am trying to start a Managed server from the Node Manager. The configuration is as follows:
I have a domain with two managed servers(M1, M2). I could start both of them using the shell scripts without any problems. Both of the servers has custom memory settings -Xms3072m -Xmx3072m -XX:PermSize=256m
to facilitate deployment and effective operation of managed servers (the applications being deployed are kind of large).
Now, I am trying to start the same two servers using Admin Console:
In the admin console: I created a Unix Machine(U1) assigned the managed servers (M1, M2) to U1. I started the Node Manager on U1.
When I try to start a Managed Server from console, the server is starting but the memory settings (-Xms3072m -Xmx3072m -XX:PermSize=256m ) are not passed to the managed server startup, so the application deployment is failing with out of Memory errors. I tried to assign same memory settings to Node manager assuming it will pass on that configuration to the node manager without any luck.
Any help is appreciated.
Thanks
Raj

Starting Managed Server from Node Manager

Error message fax scan canceled on officejet 4500 all in one when faxing from the solution center.

I keep getting the error message fax scan canceled on my hp officejet 4500 all in one when I try to fax from the hp solution center,I have no proplem faxing from the officejet 4500 itself. I appreciate any light that you can shed on this matter.Thank you.

Hey @kburns7934 ,
I just sent you a private message. If you are not sure how to check your forum messages this post, has instructions.
Enjoy your Monday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Faxes from the daily manager.

Similar Messages

Maybe you are looking for