Faxing does not work. Says it's waiting for the driver to connect.

I set up the bluetooth fax printer but when I click to send the fax, it says that it's waiting for the driver to connect.
Any ideas?

If you don't have a land line you can't fax without a system like eFax which uses e-mail to send faxes to a phone number. If you have a land line, you must tie up the land line to connect to another phone number to Fax to it.
You can probably also fax over VOIP based lines, but not all have a strong enough signal for faxing. Check with your VOIP carrier if you have one if Faxes are supported. Regardless, the Fax capability of any multifunction printer or scanner is only operable through an actual phone line. VOIP offers phone line to internet capability.

Similar Messages

Epson perfection 610 does not work as claimed with Mavericks. The driver has not been working since it was introduced in previous OSX releases. Will Epson look into this matter as the images produced are unusable, the cymk channels are offset.

Has anyone had this scanner working with the Apple drivers? Mavericks still adds this scanner and even gives it the correct icon in the dock. But, the CYMK channels are offset making the output images unusable. Surely this must be a driver fault which has been long standing, before Mavericks. I get the impression it is a generic driver that just maybe recognises an epson scanner and just does what it always does without taking too much care to adapt to the scanner itself. Such as shame as the Apple scanning software is otherwise very good.

Anyone know how to inform Apple they have a problem with the driver? Just to let them know...
Of course there is handmade solution by using Photoshop and move channels each other but frankly...
Here are sample scans which demonstrates the problem, one on mac through Image Capture:
… and just to compare, the sample I did in Paint (virtual Windows machine under OSX):

HDMI does not work, service tech still waiting for parts.

Service tech can't get parts after 2 1/2 months to fix tv that i bought in Jan. 2012 it upsets me that this can't be resolved i spent 1400 dollars on a tv i can't use i would like to know who dropped the ball here?
some body please pick up the ball.
THANK YOU
TY

Did Toshiba customer support refer you to that technician? You should be able to check the status by calling (800) 631-3811.
- Peter

I just had a new hard disc installed and now the LBP0000 canon printer does not work saying it can't connect to CCPD...connection refused! pls help!!?

I just had a new hard disc installed and now the LBP0000 canon printer does not work saying it can't connect to CCPD...connection refused! pls help!!?

You need to reinstall the printer driver, and set up the printer on the new hard drive.
The Canon site should have the driver. Download it and install.
Then go to Apple menu / System Preferences / Print & Fax and click the + (plus sign) and follow the directions.

My old MBP (2005) often crashes, freezes or shows grey screen at start up. Also track pad often does not work. I have re fomatted the HD and reinstalled system but to no avail. Genius bar says possible faulty HD, but suspect logic board, any ides any body

My old 17" MBP (2005) often crashes, freezes or shows grey screen at start up. Also track pad often does not work. I have re fomatted the HD and reinstalled system but to no avail. Genius bar says possible faulty HD, but I suspect logic board. All checks out OK on the Apple Diagnostic bench. Can a Logic board go intermittant?? Any Ideas any body??

Ive repaired 1000s of laptops over the years (translate: diagnose and replace parts).
Its not that old, Ive owned 100s of laptops (most were free) ....some I still have are nearly 13 years old and still perfect, ....some extremely expensive ones died in under a year.
other than becoming obsolete at some point, there isnt really any "will spoil on" data like Milk for solid state computer parts, ....alas.
You can have a $5000 laptop die in 4 months, and a junker one keep kicking after 10 years.... Ive seen that firsthand countless times.
Common logic dictates that "very expensive = long life" in computers,..... but all the repair people will tell you just the opposite.
I know you have a gripe, I get that all too well honestly .

I have a ipod 2nd gen it is full cannot delete,the sync button does not work,says use cd that came with ipod

ihave a ipod 2nd gen it is full cannot delete,the sync button does not work,says not used anymore,says use a cd that came with,,also cannot download itunes store,it says ios is out dated

If you can't copy your purchases by right clicking on it in the device list and choosing "transfer purchases", download the apps again for free: http://support.apple.com/kb/HT2519
Music can only be downloaded once.

How i can back up my i phone ore restore back up if it keeps to say password is wrong. i tried every possible psw ds does not work. now i want to change the password it wants old pswd and i do not know it. what can i do?

how i can back up my i phone ore restore back up if it keeps to say password is wrong. i tried every possible psw ds does not work. now i want to change the password it wants old pswd and i do not know it. what can i do?

Sorry, but if you have forgotten the password for your encrypted backup, you'll have to start all over again:
Make sure that the password you use is one that you'll remember. If you encrypt an iPhone backup in iTunes and forget your password, you won't be able to restore from backup, and your data will be unrecoverable.
If you can't remember the password and want to start again, you must perform a full software restore and choose set up as a new device when iTunes prompts you to select the backup from which to restore.
copied from Create and delete iPhone, iPad, and iPod touch backups in iTunes

Acrobat X1, Purchased upgrade, failed as no valid product to upgrade from existed (my mistake but want my money back!). So purchased Acobat X1 std, install seemed OK, but does not work as I continue to get the upgrade screen saying no valid product to upg

Acrobat X1, Purchased upgrade, failed as no valid product to upgrade from existed (my mistake but want my money back!). So purchased Acobat X1 std, install seemed OK, but does not work as I continue to get the upgrade screen saying no valid product to upgrade from? So now I have spent lots $$ and nothing working. Why is this so complicated? what do I need to do?

Hi Rave,
Thanks for this; my issue is that I have now supposedly purchased a retail version of Acrobat X1 (i.e just spent more $$, after the upgrade attempt to Acrobat X1 failed), and while this feigns an OK install, it fails in someway to override the "Upgrade Acrobat X1 version". E.G. once I load up to read an acrobat file the "upgrade version" executes/intercepts and ask for serial numbers and check for a previous qualifying version which I do not have, (BUT what I do have is the current retail version of acrobat X1 which is not recognised)
Do I need to uninstall and start over again? (I am reluctant to do this as I am sure serial number issues will arise, as I assume downloaded file will be cleaned up etc, and I am not spending more money trying again!)
Any suggestions?

Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box.

Greetings, I am working in Final Cut Pro 7. In the timeline some clips show as offline. I tried going to sequence and reconnecting to media but it does not work. I can still see the video in the timeline and work with it. It just has the red box. Thanks! Olga

If the clips are not actually missing, you could try to refresh the timeline by using cmd-0 and then going to the timeline options tab. Then select name only where it says "thumbnail display". Press ok to accept the change, then repeat the process to add thumbnails back to your timeline.

Touch ID in my iPhone six does not work when it's plugged into the wall is anybody else having this problem?

i've noticed a touch ID only works with my iPhone six is not plugged into the wall was soon as I plug it in it doesn't work anymore doesn't even register fingerprint.

Charger60 wrote:
i
Touch ID in my iPhone six does not work when it's plugged into the wall is anybody else having this problem?
No. You are the only one. The way I know is that I don't have the problem, therefore no one else can have it.
Seriously, no matter what problem you have, with a half billion iPhones in use, someone else will have the same or similar problem. So knowing that doesn't help solve it in the slightest. As it's new and still in warranty I would take it to an Apple store. Make a genius bar appointment first so you won't have a long wait.

Keyboard plugs into the back of my display does not work? but when I plug the keyboard into my MacBook Pro it works fine? is it my display Monitor?

My keyboard plugs into the back of my display monitor it does not work? but when I plug the keyboard into my MacBook Pro it works fine? is it my display Monitor?

Try:
- Resetting the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Resetting network settings: Setting>General>Reset>Reset Network Settings

Hi I was just wondering, if my iPod nano's serial number says that it is eligible, but its screen is not working, am I still eligibile for the iPod nano 1st gen replacement?

Hi I was just wondering, if my iPod nano's serial number says that it is eligible, but its screen is not working, am I still eligibile for the iPod nano 1st gen replacement?

Yes. They'll still replace your iPod. Several users have indicated that they have returned damaged iPods and were still given a replacement iPod.
B-rock

HT204135 I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

I update my Mac to version 10.9.2 and now my printer does not work anymore. I did all the software updates and I do not understand why my mac does not recognize the printer anymore?

Go to the website of the manufacturer of your printer and check to see if they have released an updated driver for your particular model.

I was billed for a renewal with eHarmony that does not work. Eharmony said itunes claims the charge didnt go through but I have already been billed. How do I get my money back or get my subscription working??

I was billed for a renewal with eHarmony via iTunes that does not work. Eharmony said itunes claims the charge didnt go through but I have already been billed it is on my bank statement. How do I get my money back or get my subscription working?? I have all transaction ID's and invoice numbers. Please help this has been very frustrating, thanks.

Yes, I reported the problem using that exact sequence immediately after discovering the problem with the app. When I submitted my complaint and request, Apple redirected me the website of the app manufacturer where I submitted the same complaint/request for refund. I have not heard back from either, and was still charged, so I can only assume that is not the correct way to "Report a Problem" even though Apple would have you believe otherwise.

What has happened to the iPad 2 finger select and drag technique? Since upgrading to iOS7 it does not work? I used this all the time to select multple images, approx 75 from an SD card containing 1000 images. Its painful indvidually selecting the images

What has happened to the iPad 2 finger select and drag technique?
Since upgrading to iOS7 it does not work?
I used this all the time to select multple images, approx 75 from an SD card containing 1000 images. Its painful indvidually selecting the images

What would you like us to tell you? If it doesn't work, there is nothing that we users can do about it.
Please submit your feature request to Apple at this link: http://www.apple.com/feedback

Faxing does not work. Says it's waiting for the driver to connect.

Similar Messages

Maybe you are looking for