Faxing results in Kernel Panic?

Not that I send many faxes ... but once in a while it might happen I need to send info by fax ... and since 2 days I have a traditional tel line ... so I wanted to try the fax possibilities inside the print/fax PDF option ... I have the latest MacOsX on my PB.
and 2 times the same thing happened:
I select a simple doc choose a fax number and "fax" the Kernel Panic screen drops down??
anybody ??
my systemprefs are activated to fax

There are lots of problems faxing with the fax utilities provided in Macs.
It appears that Apple forums are very poorly supported. Often, I have received no inputs to a question, too.
The last few Macs I used had fax utilities based on FAXstfX softwarre - all of which have been horribly buggy, in my experience.
Apple appears not to care.
Similarly, in my experience, I and many others have posted reports of the Safari browser hanging (resulting in the endlessly spinning polychrome wheel). Similarly, Apple appears not to care.
I need a new laptop, and I am probably going to go for a PC because Apple technical support is no better than what I can get for a PC, and a PC is three times less expensive than a Mac.

Similar Messages

  • 10.4.9 Upgrade: Fails. Reboot results in Kernel Panic ACPI error

    I am upgrading 11 MacBook Pros 10.4.6 to 10.4.9. Becasue they are all on a slow Wifi I am using the manual updates via a thumb drive.
    So far 2 out of 6 have failed the install process. One gave me a general error. I tried to re-run the program but when I did the font for the drop down menu turned into all boxes with capital As inside them. In both cases when I have rebooted I have gotten a Kernel Panic ACPI error. I have tried all the Kernel Panic tricks mentioned in the 10.4.9 threads. I am now reinstalling on the two machines.
    1 of 6 did the install just fine but is now stopped on the "Starting Mac OS X..." screen with a full blue bar.
    Does anyone have any idea what is wrong?

    You may find the following useful:
    From a recent article at MacFixit:
    Mac OS X 10.4.9 Special Report: Update procedure recommendation
    First, make a full backup of your current Mac OS X installation -- preferably a clone ( try SuperDuper! or Carbon Copy Cloner). If something goes wrong, or you experience a major incompatibility after updating, the backup will prove invaluable.
    Next, if you are the cautious type, run a disk repair on the volume targeted for installation. You can use an n alternative startup drive or your Mac OS X installation disc. If you are starting up from your Mac OS X install disc, put the disc in your optical drive and restart holding down the "C" key. After your system starts up and you've selected your language, go to the "Utilties" menu and select "Disk Utility." Use the "Repair Disk" function. After disk repairs are complete, restart from your normal startup drive and continue.
    Avoid performing any other operations (in Mac OS X or third-party applications) while the update process is occurring.
    Performing other tasks during the update process potentiates various issues, including problems with prebinding (which is happening during the "Optimizing the system" phase of the update process) and others that can occur when files are being replaced by the update are also being read/written by the currently logged in user. You should not only refrain from launching applications or working with files during the update process, but also from putting the system to sleep, disconnecting/connecting devices, and other potentially interruptive actions.
    In addition, before installing the update, make sure all Apple-installed applications and utilities are in their original locations. Moving one of these applications to a different location on your hard drive can lead to an incomplete update. Also, disconnect any FireWire/USB devices before applying Mac OS X 10.4.9 (except for your startup drive, if it is FireWire or USB, and your keyboard/mouse), then re-connect the devices one by one (checking for issues created by any particular device) after the update process is complete and the system has restarted. Also, note that the first restart after applying Mac OS X 10.4.9 may be abnormally long. Subsequent restarts should take place at normal speed.
    And this further article from MacFixit is also very important:
    When a Mac OS X update won't install with "Volume does not meet requirements for this update" message
    The error message "Volume does not meet requirements for this update" may appear when attempting to install a Mac OS X updater or a full release from disc. Generally the problem falls into one of the following categories:
    Make sure you are using the right updater (Server vs. client) There are usually a few varieties of the same Mac OS X update version. Make sure that you are not trying to install the Intel client build on a PowerPC-based Mac, or the Server build on a Mac OS X client system.
    Although we generally recommend using the standalone Mac OS X updaters rather than Software Update, the latter method will generally correctly identify the copy of Mac OS X applicable to your current system state.
    Retail vs. shipped-with-system (build numbers) Different Macs ship with different builds of Mac OS X, and one build may not be compatible with a different system. The build that ships with a MacBook Core 2 Duo, for instance, may not properly install on a Mac Pro. Hence you may receive the "Volume does not meet requirements for this update" message when mixing and matching systems and discs.
    Some retail copies of Mac OS X 10.4.x may also be unable to install on some systems that require newer builds.
    In addition, it appears that while some builds will install on specific systems, those systems will then refuse to accept subsequent updates. To ensure compatibility, inspect the following matrices:
    • Mac OS: Versions, builds included with Intel-based Macs
    http://docs.info.apple.com/article.html?artnum=303315
    • Mac OS: Versions, builds included with PowerPC Macs (since 1998)
    http://docs.info.apple.com/article.html?artnum=25517
    and note that you should not use a Mac OS version earlier than the one included with the computer.
    Combo vs. Delta Remember that delta Mac OS X updaters can only update systems version-to-version, e.g. Mac OS X 10.4.8 to Mac OS X 10.4.9. Combo updaters can bring any version within the scope of a major release (Panther, Tiger, etc.) up-to-date, e.g. Mac OS X 10.4.3 to Mac OS X 10.4.9.
    Attempting to run a delta update on anything other than the directly precedent version may result in the "Volume does not meet requirements for this update" message.

  • Flash (video) results in kernel panic/unresponsive UI

    I have a MacBook 4,1. Watching flash video (it is neither site nor browser specific) sometimes results in a kernel panic with associated message, and everything stops responding. Most of the time the screen instead freezes but the sound continues to play. I am able to move the mouse around, but not click on anything. No keyboard shortcuts work, though the caps lock light will go on/off.
    One of these situations always presents itself within 30 minutes (of continuous, or very nearly continuous watching). I am yet to see the problem occur in any other situation. I have tried a full uninstall and reinstall of flash to to avail. About 2 months ago, the stock 2GB RAM was swapped our for 4GB. The Apple Hardware Test (inc. the more thorough diagnostic) reported no problems, though I can't find the original 2GB to compare to. I have Windows 7 installed under bootcamp and very rarely get BSODs or complete OS locks when using it.
    To rule out overheating, the fan was forced to a constant ~6200RPM. The highest temp was on the CPU, which was still always below 62 Celsius (mostly in the high 50s), and the crash/lock occurred as before.
    Any suggestions as to the cause? Or further troubleshooting techniques? Either would be greatly appreciated!
    Kernel panic logs are only given when I actually get the KP message. Here is the most recent log:
    Sun Apr 10 01:50:54 2011
    panic(cpu 1 caller 0x1112cf2): AppleIntelGMAX3100FB GPU parser error. EIR 0x1 ESR 0x1 Instruction Error IPEIR 0 IPEHR 0xd000000 BBADDR 0x2520c63 INSTDONE 0x52021 INSTPS 0x8001e022 INSTPM 0x10
    Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
    0x5c5bbe28 : 0x21b510 (0x5d9514 0x5c5bbe5c 0x223978 0x0)
    0x5c5bbe78 : 0x1112cf2 (0x111ad54 0x8c0a8a0 0x111ad44 0x1)
    0x5c5bbf08 : 0x55125b (0x8c95800 0x8cc7700 0x1 0x29f562)
    0x5c5bbf58 : 0x55028c (0x8cc7700 0x0 0x9a7fbc0 0x9a7fb98)
    0x5c5bbf88 : 0x5506e6 (0x8d0ab80 0x8d0ab80 0x0 0x0)
    0x5c5bbfc8 : 0x2a06dc (0x8d0ab80 0x0 0x10 0x98b5fc0)
    Kernel Extensions in backtrace (with dependencies):
    com.apple.driver.AppleIntelGMAX3100FB(6.2.6)@0x1107000->0x111dfff
    dependency: com.apple.iokit.IOACPIFamily(1.3.0)@0x913000
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x927000
    dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0xd7c000
    dependency: com.apple.driver.AppleSMC(3.1.0d3)@0x917000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    10J869
    Kernel version:
    Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
    System model name: MacBook4,1 (Mac-F22788A9)
    System uptime in nanoseconds: 4058046187224
    unloaded kexts:
    com.apple.driver.AirPortBrcm43xx 423.91.27 (addr 0xb04000, size 0x1900544) - last unloaded 168906328614
    loaded kexts:
    com.apple.filesystems.ntfs 3.4 - last loaded 28816847232
    com.apple.filesystems.autofs 2.1.0
    com.apple.driver.AppleHDA 1.9.9f12
    com.apple.driver.SMCMotionSensor 3.0.0d4
    com.apple.driver.AppleHWSensor 1.9.3d0
    com.apple.driver.AppleUpstreamUserClient 3.5.4
    com.apple.driver.AppleMCCSControl 1.0.17
    com.apple.driver.AudioAUUC 1.54
    com.apple.DontSteal_Mac_OSX 7.0.0
    com.apple.driver.AudioIPCDriver 1.1.6
    com.apple.driver.AppleIntelPenrynProfile 17
    com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
    com.apple.driver.AppleLPC 1.4.12
    com.apple.driver.AppleBacklight 170.0.34
    com.apple.driver.AppleIntelGMAX3100 6.2.6
    com.apple.driver.AppleIntelGMAX3100FB 6.2.6
    com.apple.driver.AppleUSBTrackpad 200.3.2
    com.apple.driver.AppleUSBTCKeyEventDriver 200.3.2
    com.apple.driver.AppleUSBTCKeyboard 200.3.2
    com.apple.driver.AppleIRController 303.8
    com.apple.iokit.SCSITaskUserClient 2.6.5
    com.apple.BootCache 31
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.iokit.IOAHCIBlockStorage 1.6.3
    com.apple.driver.AirPortBrcm43224 427.36.9
    com.apple.driver.AppleSmartBatteryManager 160.0.0
    com.apple.driver.AppleAHCIPort 2.1.5
    com.apple.driver.AppleFWOHCI 4.7.1
    com.apple.driver.AppleUSBHub 4.1.7
    com.apple.driver.AppleIntelPIIXATA 2.5.1
    com.apple.iokit.AppleYukon2 3.2.1b1
    com.apple.driver.AppleUSBEHCI 4.1.8
    com.apple.driver.AppleUSBUHCI 4.1.5
    com.apple.driver.AppleEFINVRAM 1.4.0
    com.apple.driver.AppleRTC 1.3.1
    com.apple.driver.AppleHPET 1.5
    com.apple.driver.AppleACPIButtons 1.3.5
    com.apple.driver.AppleSMBIOS 1.6
    com.apple.driver.AppleACPIEC 1.3.5
    com.apple.driver.AppleAPIC 1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
    com.apple.security.sandbox 1
    com.apple.security.quarantine 0
    com.apple.nke.applicationfirewall 2.1.11
    com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
    com.apple.driver.DspFuncLib 1.9.9f12
    com.apple.driver.AppleProfileReadCounterAction 17
    com.apple.driver.AppleHDAController 1.9.9f12
    com.apple.iokit.IOHDAFamily 1.9.9f12
    com.apple.driver.AppleProfileTimestampAction 10
    com.apple.driver.AppleProfileThreadInfoAction 14
    com.apple.driver.AppleProfileRegisterStateAction 10
    com.apple.driver.AppleProfileKEventAction 10
    com.apple.driver.AppleProfileCallstackAction 20
    com.apple.iokit.IOFireWireIP 2.0.3
    com.apple.iokit.IOSurface 74.2
    com.apple.iokit.IOBluetoothSerialManager 2.4.0f1
    com.apple.iokit.IOSerialFamily 10.0.3
    com.apple.iokit.IOAudioFamily 1.8.0fc1
    com.apple.kext.OSvKernDSPLib 1.3
    com.apple.iokit.AppleProfileFamily 41
    com.apple.driver.IOPlatformPluginFamily 4.5.0d5
    com.apple.iokit.IONDRVSupport 2.2
    com.apple.driver.AppleSMC 3.1.0d3
    com.apple.iokit.IOGraphicsFamily 2.2
    com.apple.driver.CSRUSBBluetoothHCIController 2.4.0f1
    com.apple.driver.AppleUSBBluetoothHCIController 2.4.0f1
    com.apple.iokit.IOBluetoothFamily 2.4.0f1
    com.apple.iokit.IOUSBHIDDriver 4.1.5
    com.apple.driver.AppleUSBMergeNub 4.1.8
    com.apple.driver.AppleUSBComposite 3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
    com.apple.iokit.IOBDStorageFamily 1.6
    com.apple.iokit.IODVDStorageFamily 1.6
    com.apple.iokit.IOCDStorageFamily 1.6
    com.apple.driver.XsanFilter 402.1
    com.apple.iokit.IOATAPIProtocolTransport 2.5.1
    com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
    com.apple.iokit.IO80211Family 314.1.1
    com.apple.iokit.IOAHCIFamily 2.0.4
    com.apple.iokit.IOFireWireFamily 4.2.6
    com.apple.iokit.IOUSBUserClient 4.1.5
    com.apple.iokit.IOATAFamily 2.5.1
    com.apple.iokit.IONetworkingFamily 1.10
    com.apple.iokit.IOUSBFamily 4.1.8
    com.apple.driver.AppleEFIRuntime 1.4.0
    com.apple.iokit.IOHIDFamily 1.6.5
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 6
    com.apple.driver.DiskImages 289
    com.apple.iokit.IOStorageFamily 1.6.2
    com.apple.driver.AppleACPIPlatform 1.3.5
    com.apple.iokit.IOPCIFamily 2.6
    com.apple.iokit.IOACPIFamily 1.3.0
    System Profile:
    Model: MacBook4,1, BootROM MB41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.31f1
    Graphics: Intel GMA X3100, GMA X3100, Built-In, 144 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.9)
    Bluetooth: Version 2.4.0f1, 2 service, 12 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Serial ATA Device: FUJITSU MHY2250BH, 232.89 GB
    Parallel ATA Device: MATSHITADVD-R UJ-867
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8501, 0xfd400000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x022a, 0x5d200000
    USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
    USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc529, 0x1d100000

    I have a MacBook 4,1. Watching flash video (it is neither site nor browser specific) sometimes results in a kernel panic with associated message, and everything stops responding. Most of the time the screen instead freezes but the sound continues to play. I am able to move the mouse around, but not click on anything. No keyboard shortcuts work, though the caps lock light will go on/off.
    One of these situations always presents itself within 30 minutes (of continuous, or very nearly continuous watching). I am yet to see the problem occur in any other situation. I have tried a full uninstall and reinstall of flash to to avail. About 2 months ago, the stock 2GB RAM was swapped our for 4GB. The Apple Hardware Test (inc. the more thorough diagnostic) reported no problems, though I can't find the original 2GB to compare to. I have Windows 7 installed under bootcamp and very rarely get BSODs or complete OS locks when using it.
    To rule out overheating, the fan was forced to a constant ~6200RPM. The highest temp was on the CPU, which was still always below 62 Celsius (mostly in the high 50s), and the crash/lock occurred as before.
    Any suggestions as to the cause? Or further troubleshooting techniques? Either would be greatly appreciated!
    Kernel panic logs are only given when I actually get the KP message. Here is the most recent log:
    Sun Apr 10 01:50:54 2011
    panic(cpu 1 caller 0x1112cf2): AppleIntelGMAX3100FB GPU parser error. EIR 0x1 ESR 0x1 Instruction Error IPEIR 0 IPEHR 0xd000000 BBADDR 0x2520c63 INSTDONE 0x52021 INSTPS 0x8001e022 INSTPM 0x10
    Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
    0x5c5bbe28 : 0x21b510 (0x5d9514 0x5c5bbe5c 0x223978 0x0)
    0x5c5bbe78 : 0x1112cf2 (0x111ad54 0x8c0a8a0 0x111ad44 0x1)
    0x5c5bbf08 : 0x55125b (0x8c95800 0x8cc7700 0x1 0x29f562)
    0x5c5bbf58 : 0x55028c (0x8cc7700 0x0 0x9a7fbc0 0x9a7fb98)
    0x5c5bbf88 : 0x5506e6 (0x8d0ab80 0x8d0ab80 0x0 0x0)
    0x5c5bbfc8 : 0x2a06dc (0x8d0ab80 0x0 0x10 0x98b5fc0)
    Kernel Extensions in backtrace (with dependencies):
    com.apple.driver.AppleIntelGMAX3100FB(6.2.6)@0x1107000->0x111dfff
    dependency: com.apple.iokit.IOACPIFamily(1.3.0)@0x913000
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x927000
    dependency: com.apple.iokit.IOGraphicsFamily(2.2)@0xd7c000
    dependency: com.apple.driver.AppleSMC(3.1.0d3)@0x917000
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    10J869
    Kernel version:
    Darwin Kernel Version 10.7.0: Sat Jan 29 15:17:16 PST 2011; root:xnu-1504.9.37~1/RELEASE_I386
    System model name: MacBook4,1 (Mac-F22788A9)
    System uptime in nanoseconds: 4058046187224
    unloaded kexts:
    com.apple.driver.AirPortBrcm43xx 423.91.27 (addr 0xb04000, size 0x1900544) - last unloaded 168906328614
    loaded kexts:
    com.apple.filesystems.ntfs 3.4 - last loaded 28816847232
    com.apple.filesystems.autofs 2.1.0
    com.apple.driver.AppleHDA 1.9.9f12
    com.apple.driver.SMCMotionSensor 3.0.0d4
    com.apple.driver.AppleHWSensor 1.9.3d0
    com.apple.driver.AppleUpstreamUserClient 3.5.4
    com.apple.driver.AppleMCCSControl 1.0.17
    com.apple.driver.AudioAUUC 1.54
    com.apple.DontSteal_Mac_OSX 7.0.0
    com.apple.driver.AudioIPCDriver 1.1.6
    com.apple.driver.AppleIntelPenrynProfile 17
    com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
    com.apple.driver.AppleLPC 1.4.12
    com.apple.driver.AppleBacklight 170.0.34
    com.apple.driver.AppleIntelGMAX3100 6.2.6
    com.apple.driver.AppleIntelGMAX3100FB 6.2.6
    com.apple.driver.AppleUSBTrackpad 200.3.2
    com.apple.driver.AppleUSBTCKeyEventDriver 200.3.2
    com.apple.driver.AppleUSBTCKeyboard 200.3.2
    com.apple.driver.AppleIRController 303.8
    com.apple.iokit.SCSITaskUserClient 2.6.5
    com.apple.BootCache 31
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.iokit.IOAHCIBlockStorage 1.6.3
    com.apple.driver.AirPortBrcm43224 427.36.9
    com.apple.driver.AppleSmartBatteryManager 160.0.0
    com.apple.driver.AppleAHCIPort 2.1.5
    com.apple.driver.AppleFWOHCI 4.7.1
    com.apple.driver.AppleUSBHub 4.1.7
    com.apple.driver.AppleIntelPIIXATA 2.5.1
    com.apple.iokit.AppleYukon2 3.2.1b1
    com.apple.driver.AppleUSBEHCI 4.1.8
    com.apple.driver.AppleUSBUHCI 4.1.5
    com.apple.driver.AppleEFINVRAM 1.4.0
    com.apple.driver.AppleRTC 1.3.1
    com.apple.driver.AppleHPET 1.5
    com.apple.driver.AppleACPIButtons 1.3.5
    com.apple.driver.AppleSMBIOS 1.6
    com.apple.driver.AppleACPIEC 1.3.5
    com.apple.driver.AppleAPIC 1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
    com.apple.security.sandbox 1
    com.apple.security.quarantine 0
    com.apple.nke.applicationfirewall 2.1.11
    com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
    com.apple.driver.DspFuncLib 1.9.9f12
    com.apple.driver.AppleProfileReadCounterAction 17
    com.apple.driver.AppleHDAController 1.9.9f12
    com.apple.iokit.IOHDAFamily 1.9.9f12
    com.apple.driver.AppleProfileTimestampAction 10
    com.apple.driver.AppleProfileThreadInfoAction 14
    com.apple.driver.AppleProfileRegisterStateAction 10
    com.apple.driver.AppleProfileKEventAction 10
    com.apple.driver.AppleProfileCallstackAction 20
    com.apple.iokit.IOFireWireIP 2.0.3
    com.apple.iokit.IOSurface 74.2
    com.apple.iokit.IOBluetoothSerialManager 2.4.0f1
    com.apple.iokit.IOSerialFamily 10.0.3
    com.apple.iokit.IOAudioFamily 1.8.0fc1
    com.apple.kext.OSvKernDSPLib 1.3
    com.apple.iokit.AppleProfileFamily 41
    com.apple.driver.IOPlatformPluginFamily 4.5.0d5
    com.apple.iokit.IONDRVSupport 2.2
    com.apple.driver.AppleSMC 3.1.0d3
    com.apple.iokit.IOGraphicsFamily 2.2
    com.apple.driver.CSRUSBBluetoothHCIController 2.4.0f1
    com.apple.driver.AppleUSBBluetoothHCIController 2.4.0f1
    com.apple.iokit.IOBluetoothFamily 2.4.0f1
    com.apple.iokit.IOUSBHIDDriver 4.1.5
    com.apple.driver.AppleUSBMergeNub 4.1.8
    com.apple.driver.AppleUSBComposite 3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
    com.apple.iokit.IOBDStorageFamily 1.6
    com.apple.iokit.IODVDStorageFamily 1.6
    com.apple.iokit.IOCDStorageFamily 1.6
    com.apple.driver.XsanFilter 402.1
    com.apple.iokit.IOATAPIProtocolTransport 2.5.1
    com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
    com.apple.iokit.IO80211Family 314.1.1
    com.apple.iokit.IOAHCIFamily 2.0.4
    com.apple.iokit.IOFireWireFamily 4.2.6
    com.apple.iokit.IOUSBUserClient 4.1.5
    com.apple.iokit.IOATAFamily 2.5.1
    com.apple.iokit.IONetworkingFamily 1.10
    com.apple.iokit.IOUSBFamily 4.1.8
    com.apple.driver.AppleEFIRuntime 1.4.0
    com.apple.iokit.IOHIDFamily 1.6.5
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 6
    com.apple.driver.DiskImages 289
    com.apple.iokit.IOStorageFamily 1.6.2
    com.apple.driver.AppleACPIPlatform 1.3.5
    com.apple.iokit.IOPCIFamily 2.6
    com.apple.iokit.IOACPIFamily 1.3.0
    System Profile:
    Model: MacBook4,1, BootROM MB41.00C1.B00, 2 processors, Intel Core 2 Duo, 2.4 GHz, 4 GB, SMC 1.31f1
    Graphics: Intel GMA X3100, GMA X3100, Built-In, 144 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x88), Broadcom BCM43xx 1.0 (5.10.131.36.9)
    Bluetooth: Version 2.4.0f1, 2 service, 12 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Serial ATA Device: FUJITSU MHY2250BH, 232.89 GB
    Parallel ATA Device: MATSHITADVD-R UJ-867
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8501, 0xfd400000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8205, 0x1a100000
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x022a, 0x5d200000
    USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
    USB Device: USB Receiver, 0x046d (Logitech Inc.), 0xc529, 0x1d100000

  • Initial Time machine backup to Time capsule results in kernel panic

    I recently purchased a Retina display MacBook Pro (running Lion at the time) and transferred the data from an external hard drive with my Time Machine backups from my previous MBP. I also bought a new Time Capsule. 
    The first time I tried to back up to the Time Capsule from the Retina MBP via an ethernet connection it got to 40GB of 140GB before it shut down from a kernel panic. Interestingly, the Time Machine backup was successful when I used the external hard drive I was previously using for my Time Machine backups (connected via USB).
    I don't think there is an issue with the Time Capsule because Finder can locate the Time Capsule and I can copy and paste files from the Macintosh HD to the Time Capsule disk.
    I've done the following steps in order to try and fix the problem:
    1. Repair permissions
    2. Verify and Repair Macintosh HD
    3. Updated the operating system to Mountain Lion (at which point I successfully completed a Time Machine backup to the external hard drive I was using for Time machine backups but was unable to backup to the Time Capsule without the computer crashing from a kernel panic)
    4. Used Airport Utility to erase the sparse disk image bundle that had been created on the Time Capsule then tried to back up via ethernet to the time capsule - kernel panic ensued at 40GB of 140GB
    5. Used Disk Utility to erase Macintosh HD and re-installed Mountain Lion. Transferred data from the external hard drive Time Machine backup from step 3.
    6. Erased the sparse disk image bundle on the Time Capsule again.
    7. Tried to backup to the Time Capsule again via Ethernet - kernel panic.
    For each of the attemtps to back up to the Time Capsule I've used a different ethernet cable (Cat 5 and 5e) and plugged it into a different ethernet port on the Time Capsule each time. I've also tried using both Thunderbolt ports on the MBP (with an Ethernet to Thunderbolt adaptor).
    I'm out of ideas on how to trouble shoot this problem and would greatly appreciate any ideas!!
    If anyone knows how to read error logs, here's the readout from one of the kernic panics:
    Thu Aug  9 23:58:29 2012
    panic(cpu 6 caller 0xffffff80002c4794): Kernel trap at 0xffffff80003c0da3, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x0000000000000130, CR3: 0x0000000000100000, CR4: 0x00000000001606e0
    RAX: 0x0000000000000000, RBX: 0xffffff80ebcc0500, RCX: 0x000000000000000a, RDX: 0x0000000000004000
    RSP: 0xffffff80f3bebd60, RBP: 0xffffff80f3bebef0, RSI: 0xffffff80008cd400, RDI: 0xffffff80ebcc0500
    R8:  0xffffff80ebcce29c, R9:  0xffffff80f3bebc50, R10: 0xffffff80f1b73cb8, R11: 0x00000000001c3b08
    R12: 0xffffff80ebcce200, R13: 0xffffff80ea22d000, R14: 0xffffff80ebca2400, R15: 0xffffff8013e85388
    RFL: 0x0000000000010207, RIP: 0xffffff80003c0da3, CS:  0x0000000000000008, SS:  0x0000000000000010
    CR2: 0x0000000000000130, Error code: 0x0000000000000000, Faulting CPU: 0x6
    Backtrace (CPU 6), Frame : Return Address
    0xffffff80f3beba10 : 0xffffff8000220792
    0xffffff80f3beba90 : 0xffffff80002c4794
    0xffffff80f3bebc40 : 0xffffff80002da55d
    0xffffff80f3bebc60 : 0xffffff80003c0da3
    0xffffff80f3bebef0 : 0xffffff80003c269d
    0xffffff80f3bebf10 : 0xffffff800036523f
    0xffffff80f3bebf60 : 0xffffff8000343c9b
    0xffffff80f3bebfb0 : 0xffffff8000820057
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    11E2620
    Kernel version:
    Darwin Kernel Version 11.4.2: Wed May 30 20:13:51 PDT 2012; root:xnu-1699.31.2~1/RELEASE_X86_64
    Kernel UUID: 25EC645A-8793-3201-8D0A-23EA280EC755
    System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
    System uptime in nanoseconds: 824267354982
    last loaded kext at 119110896089: com.lacie.driver.LaCie_RemoteComms          1.0.1 (addr 0xffffff7f807df000, size 12288)
    last unloaded kext at 195930890039: com.lacie.driver.LaCie_RemoteComms          1.0.1 (addr 0xffffff7f807df000, size 8192)
    loaded kexts:
    com.intego.iokit.VirusBarrierX6Service          10.6.14
    com.intego.iokit.VBX6NKE          1
    com.intego.iokit.BehavioralKext          1
    com.intego.kext.VirusBarrier.AppBarrierKPI          10.6.14
    com.intego.kext.VirusBarrierKPI          10.6.14
    com.oxsemi.driver.OxsemiDeviceType00          1.28.13
    com.apple.filesystems.afpfs          9.8.1
    com.apple.nke.asp_tcp          6.0.1
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.driver.AppleBluetoothMultitouch          70.12
    com.apple.filesystems.autofs          3.0
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.driver.AGPM          100.12.69
    com.apple.driver.ApplePlatformEnabler          2.0.5d3
    com.apple.driver.X86PlatformShim          5.0.0d8
    com.apple.driver.AppleHDA          2.2.3f13
    com.apple.driver.AppleMikeyDriver          2.2.3f13
    com.apple.driver.AppleUpstreamUserClient          3.5.9
    com.apple.driver.AudioAUUC          1.59
    com.apple.driver.AppleSMCPDRC          5.0.0d8
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.iokit.IOBluetoothSerialManager          4.0.7f2
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.AppleSMCLMU          2.0.1d2
    com.apple.GeForce          7.2.8
    com.apple.driver.AudioIPCDriver          1.2.3
    com.apple.driver.ApplePolicyControl          3.1.32
    com.apple.driver.AppleMuxControl          3.1.32
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.AppleMCCSControl          1.0.33
    com.apple.driver.AppleIntelHD4000Graphics          7.2.8
    com.apple.driver.AppleIntelFramebufferCapri          7.2.8
    com.apple.driver.BroadcomUSBBluetoothHCIController          4.0.7f2
    com.apple.driver.AppleUSBTCButtons          227.6
    com.apple.driver.AppleUSBTCKeyboard          227.6
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          33
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.0.4
    com.apple.driver.AppleSDXC          1.2.2
    com.apple.driver.AppleUSBHub          5.0.8
    com.apple.iokit.AppleBCM5701Ethernet          3.2.4b8
    com.apple.driver.AppleEFINVRAM          1.6.1
    com.apple.driver.AirPort.Brcm4331          560.7.21
    com.apple.driver.AppleAHCIPort          2.3.0
    com.apple.driver.AppleUSBEHCI          5.0.7
    com.apple.driver.AppleUSBXHCI          1.0.7
    com.apple.driver.AppleSmartBatteryManager          161.0.0
    com.apple.driver.AppleACPIButtons          1.5
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.7
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.5
    com.apple.driver.AppleAPIC          1.6
    com.apple.driver.AppleIntelCPUPowerManagementClient          195.0.0
    com.apple.nke.applicationfirewall          3.2.30
    com.apple.security.quarantine          1.3
    com.apple.security.TMSafetyNet          8
    com.apple.driver.AppleIntelCPUPowerManagement          195.0.0
    com.apple.security.SecureRemotePassword          1.0
    com.apple.driver.AppleMultitouchDriver          231.4
    com.apple.driver.IOBluetoothHIDDriver          4.0.7f2
    com.apple.kext.triggers          1.0
    com.apple.driver.DspFuncLib          2.2.3f13
    com.apple.iokit.IOSurface          80.0.2
    com.apple.iokit.IOSerialFamily          10.0.5
    com.apple.iokit.IOAudioFamily          1.8.6fc18
    com.apple.kext.OSvKernDSPLib          1.3
    com.apple.driver.AppleHDAController          2.2.3f13
    com.apple.iokit.IOHDAFamily          2.2.3f13
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.AppleGraphicsControl          3.1.32
    com.apple.driver.X86PlatformPlugin          5.1.1d6
    com.apple.driver.AppleSMC          3.1.3d10
    com.apple.driver.IOPlatformPluginFamily          5.1.1d6
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.nvidia.nvGK100hal          7.2.8
    com.apple.NVDAResman          7.2.8
    com.apple.iokit.IONDRVSupport          2.3.4
    com.apple.iokit.IOGraphicsFamily          2.3.4
    com.apple.driver.AppleUSBBluetoothHCIController          4.0.7f2
    com.apple.iokit.IOBluetoothFamily          4.0.7f2
    com.apple.driver.AppleUSBMultitouch          230.5
    com.apple.iokit.IOUSBHIDDriver          5.0.0
    com.apple.driver.AppleThunderboltDPInAdapter          1.8.4
    com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.4
    com.apple.driver.AppleThunderboltPCIUpAdapter          1.2.5
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
    com.apple.driver.AppleUSBMergeNub          5.0.7
    com.apple.driver.AppleUSBComposite          5.0.0
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.2.1
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.2.1
    com.apple.driver.AppleThunderboltNHI          1.6.0
    com.apple.iokit.IOThunderboltFamily          2.0.3
    com.apple.iokit.IOEthernetAVBController          1.0.1b1
    com.apple.iokit.IOUSBUserClient          5.0.0
    com.apple.iokit.IO80211Family          420.3
    com.apple.iokit.IONetworkingFamily          2.1
    com.apple.iokit.IOAHCIFamily          2.0.8
    com.apple.iokit.IOUSBFamily          5.0.8
    com.apple.driver.AppleEFIRuntime          1.6.1
    com.apple.iokit.IOHIDFamily          1.7.1
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          177.5
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.driver.DiskImages          331.7
    com.apple.iokit.IOStorageFamily          1.7.2
    com.apple.driver.AppleKeyStore          28.18
    com.apple.driver.AppleACPIPlatform          1.5
    com.apple.iokit.IOPCIFamily          2.7
    com.apple.iokit.IOACPIFamily          1.4
    Model: MacBookPro10,1, BootROM MBP101.00EE.B00, 4 processors, Intel Core i7, 2.6 GHz, 8 GB, SMC 2.3f32
    Graphics: NVIDIA GeForce GT 650M, NVIDIA GeForce GT 650M, PCIe, 1024 MB
    Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 512 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D54333531533642465238432D50422020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xEF), Broadcom BCM43xx 1.0 (5.106.198.19.21)
    Bluetooth: Version 4.0.7f2, 2 service, 18 devices, 1 incoming serial ports
    Network Service: Thunderbolt Ethernet, Ethernet, en4
    Network Service: Wi-Fi, AirPort, en0
    PCI Card: Apple 57762-A0, sppci_ethernet, Thunderbolt@104,0,0
    Serial ATA Device: APPLE SSD SM512E, 500.28 GB
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1a100000 / 2
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8510, 0x1a110000 / 3
    USB Device: hub_device, 0x8087  (Intel Corporation), 0x0024, 0x1d100000 / 2
    USB Device: hub_device, 0x0424  (SMSC), 0x2512, 0x1d180000 / 3
    USB Device: BRCM20702 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0x1d181000 / 5
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8286, 0x1d181300 / 7
    USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x0262, 0x1d182000 / 4

    Any or all of the following third-party system modifications may be contributing to your problem:
    LaCie drive software
    VirusBarrier
    I suggest you uninstall them according to the developers' instructions, reboot, and see whether there's any improvement. If there is, you can experiment with putting them back, one at a time, to identify which one is at fault. "VirusBarrier" is harmful and should not be reinstalled in any case.
    If there's no improvement after making the suggested changes, post again.

  • Mac Pro kernel panic, RAM does not seem to be problem

    My Mac Pro (late 2006) now has kernel panics at startup. Problem first happened while computer was in sleep mode, a second kernel panic happened about 10-15 minutes after reboot the first time. Now it happens at startup every time. Zapped PRAM multiple times to no effect. Tested original 10.4 install disk, as well as 10.5 and 10.6 upgrade disks with all external connections removed and from a cold boot. The 10.4 disk causes the kernel panic every time. The 10.5 and 10.6 disks do too, if the C or D key is depressed. The upgrade disks will hang in a gray screen (10.6) or pale blue screen (10.5) with no keys depressed--computer keeps running but fails to boot. Also tested the RAM (4 X 512 MB) in different combinations of one pair in the top riser board (and switched risers, and removed lower board completely). All resulted in kernel panics. Next option?

    To anyone finding this thread in the future looking for help on a similar problem, the CNet forums Mac section gave me the correct advise: replace the video card. The stock GeForce 7300 was causing the kernel panics. I replaced it with a Radeon HD 3870, from eBay, and everything went back to normal operation. (I did also have to upgrade my OS for the new card to work properly.)

  • UCS B-series :enic driver version 2.1.1.41 is causing kernel panic for RHEL5.7

    The enic driver version 2.1.1.41 which comes with driver iso ucs-bxxx-drivers.2.1.1a is resulting in Kernel panic for RHEL5.7
    When RHEL5.7 OS is installed, the kernel version that gets loaded with the iso that I have is 2.6.18-274.el5 x86_64 whereas the kernel version expected by the enic driver provided by Cisco is  2.6.18-164.el5(supported distribution).  The Cisco documentation says : If kernel version does not match, the enic RPM cannot be installed.
    The enic driver that comes with OS is  ver 2.1.1.9 whereas the one Cisco provides is ver 2.1.1.41 . The system crashes for non-matching distribution after loading the driver version 2.1.1.41 .

    Here are some other details:
    root@rhel57 cisco]# rpm -ivh kmod-enic-rhel5u7-2.1.1.41-1.0.x86_64.rpm
    Preparing...                ########################################### [100%]
       1:kmod-enic-rhel5u7      ########################################### [100%]
    [root@rhel57 cisco]# rpm -qa | grep enic
    kmod-enic-rhel5u7-2.1.1.41-1.0
    [root@rhel57 cisco]# /sbin/lsmod | grep enic
    enic                   79425  0
    8021q                  58321  2 cxgb3,enic
    Thanks,
    Yogesh

  • Kernel Panic during Time Machine Backup

    Hello everybody, two days ago I was doing a time machine backup, and I got the kernel panic message that suggested me to switch off the computer.
    I did it, I restarted the computer and since then I cannot get the time machine backup to end without a kernel panic!
    Side information: my HD of 250Gb has only 1gb left, OSX 10.6.6, everything updated,
    I was listening itunes music during the backup.
    have to be a solution!
    Down here one of the latest kernel panic log:
    Interval Since Last Panic Report: 3411 sec
    Panics Since Last Report: 2
    Anonymous UUID: 85B69788-B363-4480-86E2-82C0AD2C64B0
    Thu Jan 27 20:51:54 2011
    panic(cpu 1 caller 0x558e80): "!pageList phys_addr"@/SourceCache/xnu/xnu-1504.9.26/iokit/Kernel/IOMemoryDescriptor.cpp:1 409
    Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)
    0x730b3998 : 0x21b50c (0x5d4438 0x730b39cc 0x223974 0x0)
    0x730b39e8 : 0x558e80 (0x5ddb08 0x9a61784 0x52f2b 0x8e1)
    0x730b3a68 : 0x550bc8 (0xf101e80 0x3 0x8704300 0x80)
    0x730b3b58 : 0x55117d (0x86f7000 0x80 0x5507f0 0x5508e0)
    0x730b3b88 : 0x119b92d (0x86f7000 0x730b3bc8 0x730b3bdc 0x730b3bec)
    0x730b3c08 : 0x119f57f (0x8700e00 0x86f7000 0xf101e80 0x19000)
    0x730b3c78 : 0x1194364 (0x8700e00 0x86f7000 0xf4240 0x871ac80)
    0x730b3cb8 : 0x1194825 (0x8700e00 0x86f7000 0x0 0x160f321)
    0x730b3cf8 : 0x1608511 (0x870c700 0x871ac80 0x0 0x2a94be)
    0x730b3d38 : 0x1604800 (0x870a600 0x86fa804 0x730b3d68 0x122ea56)
    0x730b3d88 : 0x1605089 (0x870a500 0x86fa804 0x4000 0x0)
    0x730b3de8 : 0x160726a (0x870a500 0x86fa21c 0x860f0dc 0x0)
    0x730b3e08 : 0x119467e (0x870c180 0x86f7000 0x0 0x847e40)
    0x730b3e38 : 0x1195270 (0x870c700 0x86f7000 0x730b3e58 0x8700e00)
    0x730b3e58 : 0x119d05c (0x86f7000 0x86f7000 0x0 0x574c6000)
    0x730b3e98 : 0x119d1b6 (0x8700e00 0x86f7000 0x0 0x0)
    0x730b3ed8 : 0x119ecc0 (0x8700e00 0x20000 0x730b3ef8 0x0)
    0x730b3f38 : 0x119b130 (0x8700e00 0x0 0x8f41290 0x0)
    0x730b3f58 : 0x54b5dc (0x8702cc0 0x95b6a80 0x730b3f88 0x1f0)
    0x730b3f88 : 0x54ba36 (0x8702e40 0x86183d4 0x857c46d0 0x7fff)
    0x730b3fc8 : 0x2a06cc (0x8702e40 0x0 0x2a06db 0x8ca0ee4)
    Kernel Extensions in backtrace (with dependencies):
    com.apple.iokit.IOAHCIBlockStorage(1.6.3)@0x1602000->0x1614fff
    dependency: com.apple.iokit.IOAHCIFamily(2.0.4)@0x1192000
    dependency: com.apple.iokit.IOStorageFamily(1.6.2)@0x1226000
    com.apple.driver.AppleAHCIPort(2.1.5)@0x1198000->0x11abfff
    dependency: com.apple.iokit.IOAHCIFamily(2.0.4)@0x1192000
    dependency: com.apple.iokit.IOPCIFamily(2.6)@0x908000
    com.apple.iokit.IOAHCIFamily(2.0.4)@0x1192000->0x1197fff
    BSD process name corresponding to current thread: kernel_task
    Mac OS version:
    10J567
    Kernel version:
    Darwin Kernel Version 10.6.0: Wed Nov 10 18:13:17 PST 2010; root:xnu-1504.9.26~3/RELEASE_I386
    System model name: MacBookPro4,1 (Mac-F42C86C8)
    System uptime in nanoseconds: 2274904729852
    unloaded kexts:
    com.apple.driver.AppleFileSystemDriver 2.0 (addr 0x123e000, size 0x12288) - last unloaded 162290510493
    loaded kexts:
    com.regularrateandrhythm.driver.RowmoteIREmu 1.0 - last loaded 102262743571
    com.parallels.kext.Pvsvnic 3.0
    com.parallels.kext.vmmain 3.0
    com.parallels.kext.hypervisor 3.0
    uk.co.obfuscated.framebuffer 5
    com.parallels.kext.Pvsnet 3.0
    com.parallels.kext.ConnectUSB 3.0.0
    com.apple.driver.AppleHWSensor 1.9.3d0
    com.apple.filesystems.autofs 2.1.0
    com.apple.driver.AppleHDA 1.9.9f12
    com.apple.driver.AppleUpstreamUserClient 3.4.5
    com.apple.driver.AppleMCCSControl 1.0.17
    com.apple.driver.AudioAUUC 1.13
    com.apple.GeForce 6.2.6
    com.apple.driver.SMCMotionSensor 3.0.0d4
    com.apple.DontSteal_Mac_OSX 7.0.0
    com.apple.iokit.CHUDUtils 201
    com.apple.iokit.CHUDProf 216
    com.apple.driver.AudioIPCDriver 1.1.6
    com.apple.driver.AppleIntelPenrynProfile 17.1
    com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5
    com.apple.driver.AppleLPC 1.4.12
    com.apple.driver.AppleBacklight 170.0.34
    com.apple.kext.AppleSMCLMU 1.5.0d3
    com.apple.driver.AppleUSBTCButtons 200.3.2
    com.apple.driver.AppleUSBTCKeyboard 200.3.2
    com.apple.driver.Oxford_Semi 2.5.8
    com.apple.driver.AppleIRController 303.8
    com.apple.iokit.SCSITaskUserClient 2.6.5
    com.apple.iokit.AppleYukon2 3.2.1b1
    com.apple.iokit.IOAHCIBlockStorage 1.6.3
    com.apple.driver.AirPortBrcm43224 426.36.1
    com.apple.driver.AppleAHCIPort 2.1.5
    com.apple.driver.AppleIntelPIIXATA 2.5.1
    com.apple.driver.AppleUSBHub 4.1.7
    com.apple.driver.AppleFWOHCI 4.7.1
    com.apple.driver.AppleUSBEHCI 4.1.7
    com.apple.driver.AppleUSBUHCI 4.1.5
    com.apple.driver.AppleSmartBatteryManager 160.0.0
    com.apple.BootCache 31
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
    com.apple.driver.AppleEFINVRAM 1.4.0
    com.apple.driver.AppleRTC 1.3.1
    com.apple.driver.AppleHPET 1.5
    com.apple.driver.AppleACPIButtons 1.3.5
    com.apple.driver.AppleSMBIOS 1.6
    com.apple.driver.AppleACPIEC 1.3.5
    com.apple.driver.AppleAPIC 1.4
    com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0
    com.apple.security.sandbox 1
    com.apple.security.quarantine 0
    com.apple.nke.applicationfirewall 2.1.11
    com.apple.driver.AppleIntelCPUPowerManagement 105.13.0
    com.apple.driver.DspFuncLib 1.9.9f12
    com.apple.driver.AppleProfileReadCounterAction 17
    com.apple.driver.AppleProfileTimestampAction 10
    com.apple.driver.AppleProfileThreadInfoAction 14
    com.apple.driver.AppleProfileRegisterStateAction 10
    com.apple.driver.AppleProfileKEventAction 10
    com.apple.driver.AppleProfileCallstackAction 20
    com.apple.nvidia.nv50hal 6.2.6
    com.apple.NVDAResman 6.2.6
    com.apple.iokit.IOFireWireIP 2.0.3
    com.apple.iokit.IOSurface 74.2
    com.apple.iokit.IOBluetoothSerialManager 2.3.8f7
    com.apple.iokit.IOSerialFamily 10.0.3
    com.apple.iokit.CHUDKernLib 208
    com.apple.iokit.IOAudioFamily 1.8.0fc1
    com.apple.kext.OSvKernDSPLib 1.3
    com.apple.driver.AppleHDAController 1.9.9f12
    com.apple.iokit.IOHDAFamily 1.9.9f12
    com.apple.iokit.AppleProfileFamily 41
    com.apple.driver.IOPlatformPluginFamily 4.5.0d5
    com.apple.iokit.IONDRVSupport 2.2
    com.apple.driver.AppleSMC 3.1.0d3
    com.apple.iokit.IOGraphicsFamily 2.2
    com.apple.iokit.IOSCSIBlockCommandsDevice 2.6.5
    com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.8f7
    com.apple.driver.AppleUSBBluetoothHCIController 2.3.8f7
    com.apple.iokit.IOBluetoothFamily 2.3.8f7
    com.apple.driver.AppleUSBMultitouch 206.6
    com.apple.iokit.IOFireWireSerialBusProtocolTransport 2.0.1
    com.apple.iokit.IOFireWireSBP2 4.0.6
    com.apple.iokit.IOUSBHIDDriver 4.1.5
    com.apple.driver.AppleUSBMergeNub 4.1.5
    com.apple.driver.AppleUSBComposite 3.9.0
    com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5
    com.apple.iokit.IOBDStorageFamily 1.6
    com.apple.iokit.IODVDStorageFamily 1.6
    com.apple.iokit.IOCDStorageFamily 1.6
    com.apple.driver.XsanFilter 402.1
    com.apple.iokit.IOATAPIProtocolTransport 2.5.1
    com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5
    com.apple.iokit.IO80211Family 312
    com.apple.iokit.IOAHCIFamily 2.0.4
    com.apple.iokit.IOATAFamily 2.5.1
    com.apple.iokit.IOUSBUserClient 4.1.5
    com.apple.iokit.IOFireWireFamily 4.2.6
    com.apple.iokit.IOUSBFamily 4.1.7
    com.apple.iokit.IONetworkingFamily 1.9
    com.apple.driver.AppleEFIRuntime 1.4.0
    com.apple.iokit.IOHIDFamily 1.6.5
    com.apple.iokit.IOSMBusFamily 1.1
    com.apple.kext.AppleMatch 1.0.0d1
    com.apple.security.TMSafetyNet 6
    com.apple.driver.DiskImages 289
    com.apple.iokit.IOStorageFamily 1.6.2
    com.apple.driver.AppleACPIPlatform 1.3.5
    com.apple.iokit.IOPCIFamily 2.6
    com.apple.iokit.IOACPIFamily 1.3.0
    Model: MacBookPro4,1, BootROM MBP41.00C1.B03, 2 processors, Intel Core 2 Duo, 2.5 GHz, 4 GB, SMC 1.28f3
    Graphics: NVIDIA GeForce 8600M GT, GeForce 8600M GT, PCIe, 512 MB
    Memory Module: global_name
    AirPort: spairportwireless_card_type_airportextreme (0x14E4, 0x8C), Broadcom BCM43xx 1.0 (5.10.131.36.1)
    Bluetooth: Version 2.3.8f7, 2 service, 12 devices, 1 incoming serial ports
    Network Service: Ethernet Adaptor (en2), Ethernet, en2
    Network Service: Ethernet Adaptor (en3), Ethernet, en3
    Network Service: AirPort, AirPort, en1
    Serial ATA Device: Hitachi HTS542525K9SA00, 232,89 GB
    Parallel ATA Device: MATSHITADVD-R UJ-875
    USB Device: Built-in iSight, 0x05ac (Apple Inc.), 0x8502, 0xfd400000
    USB Device: Apple Internal Keyboard / Trackpad, 0x05ac (Apple Inc.), 0x0231, 0x5d200000
    USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x5d100000
    USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1a100000
    USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x820f, 0x1a110000
    FireWire Device: OEM ATA Device 00, G-TECH, Up to 400 Mb/sec

    Hi all
    my Time Machine backups regularly result in kernel panics. I'm on a MBP 2.4 GHz Intel Core 2 Duo and backing up to a Time Capsule. I removed the entire backup, erased the HDD in Airport Utility, and started from scratch backing up via Ethernet. No other applications are open.
    I verified and repaired the internal HDD with Disk Utility (booting from the Mac OS X Install DVD). HDD appears to be ok. Repaired disk permissions. Ran Apple Hardware Test, all ok. Removed the Preference file com.apple.TimeMachine.plist (as per #A4. suggestion). But after all this, I still get kernel panics only after about 2 or 3GB into the backup (of approx. 140GB data total).
    The Time Machine widget that I installed reported this after the reboot after the last kernel panic:
    +Starting standard backup+
    +Attempting to mount network destination using URL: afp://Marcus%[email protected]/Finger%20Lime%20HD+
    +Mounted network destination using URL: afp://Marcus%[email protected]/Finger%20Lime%20HD+
    +QUICKCHECK ONLY; FILESYSTEM CLEAN+
    +Disk image /Volumes/Finger Lime HD/cif-mbp-foth.sparsebundle mounted at: /Volumes/Time Machine Backups+
    +Backing up to: /Volumes/Time Machine Backups/Backups.backupdb+
    +Error parsing SystemMigration.log to determine source volume of system migration.+
    +No pre-backup thinning needed: 146.69 GB requested (including padding), 893.87 GB available+
    +Waiting for index to be ready (101)+
    These are the kernel panic reports I'm getting. I took out the HEX bits ("snip"). They all report as the possible cause: "unlocking an unlocked mutex or spinlock". Can anyone suggest any solutions to this problem? Thanks heaps!
    *Fri Mar 11 20:37:13 2011*
    +panic(cpu 1 caller 0x226b53): "thread_invoke: preemption_level -1, possible cause: unlocking an unlocked mutex or spinlock"@/SourceCache/xnu/xnu-1504.9.26/osfmk/kern/sched_prim.c:1471+
    +Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)+
    +0xfbab78 : 0x21b50c (0x5d4438 0xfbabac 0x223974 0x0)+
    *Fri Mar 11 22:20:53 2011*
    +panic(cpu 1 caller 0x226b53): "thread_invoke: preemption_level -1, possible cause: unlocking an unlocked mutex or spinlock"@/SourceCache/xnu/xnu-1504.9.26/osfmk/kern/sched_prim.c:1471+
    +Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)+
    +0x58fe2b78 : 0x21b50c (0x5d4438 0x58fe2bac 0x223974 0x0)+
    snip
    +Backtrace continues...+
    +Kernel Extensions in backtrace (with dependencies):+
    com.apple.filesystems.afpfs(9.7)@0x80ed8000->0x80f2efff
    com.apple.nke.asp_tcp(5.0)@0x1079000->0x1086fff
    +BSD process name corresponding to current thread: diskimages-helpe+
    *Fri Mar 11 23:44:41 2011*
    +panic(cpu 1 caller 0x226b53): "thread_invoke: preemption_level -1, possible cause: unlocking an unlocked mutex or spinlock"@/SourceCache/xnu/xnu-1504.9.26/osfmk/kern/sched_prim.c:1471+
    +Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)+
    +0xf82af8 : 0x21b50c (0x5d4438 0xf82b2c 0x223974 0x0)+
    snip
    +Backtrace continues...+
    +Kernel Extensions in backtrace (with dependencies):+
    com.apple.filesystems.afpfs(9.7)@0x80f60000->0x80fb6fff
    com.apple.nke.asp_tcp(5.0)@0x102b000->0x1038fff
    +BSD process name corresponding to current thread: launchd+
    *Sat Mar 12 09:26:09 2011*
    +panic(cpu 1 caller 0x226b53): "thread_invoke: preemption_level -1, possible cause: unlocking an unlocked mutex or spinlock"@/SourceCache/xnu/xnu-1504.9.26/osfmk/kern/sched_prim.c:1471+
    +Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)+
    +0x58eb2c88 : 0x21b50c (0x5d4438 0x58eb2cbc 0x223974 0x0)+
    snip
    +Kernel Extensions in backtrace (with dependencies):+
    com.apple.filesystems.afpfs(9.7)@0x80f8d000->0x80fe3fff
    com.apple.nke.asp_tcp(5.0)@0x59a9f000->0x59aacfff
    +BSD process name corresponding to current thread: diskimages-helpe+
    *Sat Mar 12 10:10:56 2011*
    +panic(cpu 1 caller 0x226b53): "thread_invoke: preemption_level -1, possible cause: unlocking an unlocked mutex or spinlock"@/SourceCache/xnu/xnu-1504.9.26/osfmk/kern/sched_prim.c:1471+
    +Backtrace (CPU 1), Frame : Return Address (4 potential args on stack)+
    +0xf1ab78 : 0x21b50c (0x5d4438 0xf1abac 0x223974 0x0)+
    snip
    +Backtrace continues...+
    +Kernel Extensions in backtrace (with dependencies):+
    com.apple.filesystems.afpfs(9.7)@0x80d9b000->0x80df1fff
    com.apple.nke.asp_tcp(5.0)@0x59a1b000->0x59a28fff
    +BSD process name corresponding to current thread: diskimages-helpe+
    +Mac OS version:+
    10J567
    +Kernel version:+
    +Darwin Kernel Version 10.6.0: Wed Nov 10 18:13:17 PST 2010; root:xnu-1504.9.26~3/RELEASE_I386+
    +System model name: MacBookPro5,1 (Mac-F42D86C8)+
    +System uptime in nanoseconds: 2564482914622+
    +unloaded kexts:+
    +com.apple.driver.AirPortBrcm43xx 423.91.27 (addr 0xee1000, size 0x1900544) - last unloaded 110467139589+
    +loaded kexts:+
    +com.cisco.nke.ipsec 2.0.1+
    +com.apple.filesystems.afpfs 9.7 - last loaded 903119162603+
    +com.apple.nke.asp_tcp 5.0+
    +com.apple.driver.AppleHWSensor 1.9.3d0+
    +com.apple.driver.AppleMikeyHIDDriver 1.2.0+
    +com.apple.driver.AppleMikeyDriver 1.9.9f12+
    +com.apple.driver.AGPM 100.12.19+
    +com.apple.driver.AppleHDA 1.9.9f12+
    +com.apple.driver.AudioAUUC 1.13+
    +com.apple.driver.ACPISMCPlatformPlugin 4.5.0d5+
    +com.apple.filesystems.autofs 2.1.0+
    +com.apple.driver.AppleIntelPenrynProfile 17+
    +com.apple.kext.AppleSMCLMU 1.5.0d3+
    +com.apple.DontSteal_Mac_OSX 7.0.0+
    +com.apple.iokit.CHUDUtils 201+
    +com.apple.iokit.CHUDProf 214+
    +com.apple.driver.AudioIPCDriver 1.1.6+
    +com.apple.driver.AppleGraphicsControl 2.8.68+
    +com.apple.driver.AppleUpstreamUserClient 3.4.5+
    +com.apple.driver.AppleMCCSControl 1.0.17+
    +com.apple.driver.AppleLPC 1.4.12+
    +com.apple.GeForce 6.2.6+
    +com.apple.driver.SMCMotionSensor 3.0.0d4+
    +com.apple.driver.AppleUSBTCButtons 200.3.2+
    +com.apple.driver.AppleUSBTCKeyboard 200.3.2+
    +com.apple.driver.AppleIRController 303.8+
    +com.apple.iokit.SCSITaskUserClient 2.6.5+
    +com.apple.iokit.IOAHCIBlockStorage 1.6.3+
    +com.apple.BootCache 31+
    +com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1+
    +com.apple.driver.AirPortBrcm43224 426.36.1+
    +com.apple.driver.AppleFWOHCI 4.7.1+
    +com.apple.driver.AppleAHCIPort 2.1.5+
    +com.apple.nvenet 2.0.15+
    +com.apple.driver.AppleSmartBatteryManager 160.0.0+
    +com.apple.driver.AppleUSBHub 4.1.7+
    +com.apple.driver.AppleUSBEHCI 4.1.7+
    +com.apple.driver.AppleUSBOHCI 4.1.5+
    +com.apple.driver.AppleEFINVRAM 1.4.0+
    +com.apple.driver.AppleRTC 1.3.1+
    +com.apple.driver.AppleHPET 1.5+
    +com.apple.driver.AppleACPIButtons 1.3.5+
    +com.apple.driver.AppleSMBIOS 1.6+
    +com.apple.driver.AppleACPIEC 1.3.5+
    +com.apple.driver.AppleAPIC 1.4+
    +com.apple.driver.AppleIntelCPUPowerManagementClient 105.13.0+
    +com.apple.security.sandbox 1+
    +com.apple.security.quarantine 0+
    +com.apple.nke.applicationfirewall 2.1.11+
    +com.apple.driver.AppleIntelCPUPowerManagement 105.13.0+
    +com.apple.driver.AppleSMBusController 1.0.8d0+
    +com.apple.driver.AppleSMBusPCI 1.0.8d0+
    +com.apple.driver.DspFuncLib 1.9.9f12+
    +com.apple.driver.AppleProfileReadCounterAction 17+
    +com.apple.driver.IOPlatformPluginFamily 4.5.0d5+
    +com.apple.driver.AppleProfileTimestampAction 10+
    +com.apple.driver.AppleProfileThreadInfoAction 14+
    +com.apple.driver.AppleProfileRegisterStateAction 10+
    +com.apple.driver.AppleProfileKEventAction 10+
    +com.apple.driver.AppleProfileCallstackAction 20+
    +com.apple.iokit.IOFireWireIP 2.0.3+
    +com.apple.iokit.IOSurface 74.2+
    +com.apple.iokit.IOBluetoothSerialManager 2.3.8f7+
    +com.apple.iokit.IOSerialFamily 10.0.3+
    +com.apple.iokit.CHUDKernLib 207+
    +com.apple.iokit.IOAudioFamily 1.8.0fc1+
    +com.apple.kext.OSvKernDSPLib 1.3+
    +com.apple.iokit.AppleProfileFamily 41+
    +com.apple.driver.AppleHDAController 1.9.9f12+
    +com.apple.iokit.IOHDAFamily 1.9.9f12+
    +com.apple.nvidia.nv50hal 6.2.6+
    +com.apple.NVDAResman 6.2.6+
    +com.apple.iokit.IONDRVSupport 2.2+
    +com.apple.iokit.IOGraphicsFamily 2.2+
    +com.apple.driver.AppleSMC 3.1.0d3+
    +com.apple.driver.AppleUSBMultitouch 206.6+
    +com.apple.driver.BroadcomUSBBluetoothHCIController 2.3.8f7+
    +com.apple.driver.AppleUSBBluetoothHCIController 2.3.8f7+
    +com.apple.iokit.IOBluetoothFamily 2.3.8f7+
    +com.apple.iokit.IOUSBHIDDriver 4.1.5+
    +com.apple.iokit.IOSCSIMultimediaCommandsDevice 2.6.5+
    +com.apple.iokit.IOBDStorageFamily 1.6+
    +com.apple.iokit.IODVDStorageFamily 1.6+
    +com.apple.iokit.IOCDStorageFamily 1.6+
    +com.apple.driver.AppleUSBMergeNub 4.1.5+
    +com.apple.driver.AppleUSBComposite 3.9.0+
    +com.apple.iokit.IOAHCISerialATAPI 1.2.5+
    +com.apple.iokit.IOSCSIArchitectureModelFamily 2.6.5+
    +com.apple.driver.XsanFilter 402.1+
    +com.apple.iokit.IO80211Family 312+
    +com.apple.iokit.IOFireWireFamily 4.2.6+
    +com.apple.iokit.IOAHCIFamily 2.0.4+
    +com.apple.iokit.IONetworkingFamily 1.9+
    +com.apple.iokit.IOUSBUserClient 4.1.5+
    +com.apple.iokit.IOUSBFamily 4.1.7+
    +com.apple.driver.AppleEFIRuntime 1.4.0+
    +com.apple.driver.NVSMU 2.2.7+
    +com.apple.iokit.IOHIDFamily 1.6.5+
    +com.apple.iokit.IOSMBusFamily 1.1+
    +com.apple.kext.AppleMatch 1.0.0d1+
    +com.apple.security.TMSafetyNet 6+
    +com.apple.driver.DiskImages 289+
    +com.apple.iokit.IOStorageFamily 1.6.2+
    +com.apple.driver.AppleACPIPlatform 1.3.5+
    +com.apple.iokit.IOPCIFamily 2.6+
    +com.apple.iokit.IOACPIFamily 1.3.0+

  • IMac G5 Kernel Panic

    I've been intermittently dropping my internet connection on my 20" iMac G5 2G (bought in September 2005 before iSight models). Restarting after the drop results in kernel panic. The panic used to resolve itself after a few tries, but now it seems permanent.
    I've done some research and checked the logs and am convinced this is an Airport Extreme issue. My daughter's older G4 runs fine on the network, so this eliminates the possibility there's something wrong with the network itself.
    I've seen where replacing the AE card has resolved this, but after reviewing the DIY instructions, my G5 looks nothing like the illustration in that there is no dock for an Airport Extreme card. It appears that I don't have a replaceable card.
    Suggestions?

    Hello Vincenzo - take a look at Dr Smoke's Resolving Kernel Panics, there should be things there that help you. Let us know how you make out,

  • HELP! Final Cut Crashes or Freezes on Export/Render System Kernel Panic

    I am having issues with Final Cut on this computer since day 1 when I first purchased it! I do alot of video production for weddings and events and this is driving me nuts!
    I have an Imac 2.16 ghz Intel Core 2 Duo with 3GB 667mhz DDR2 SDRAM. The media is reading off of my external Firewire 800 1 TB Drive. Final Cut is version 5.1.4. Quicktime version is 7.4.5
    I am editing an HDV project currently although I have had the same issue with other regular DV projects that have lengthy renders.
    The current project is fairly simplistic in layout, with a white matte on the first video line, video and png stills on the second row each with a key around the edges to give a soft white border appearance on the video. PNG stills have motion settings.
    The problem occurs when attempting to render the project. If attempting to render the entire project, the time states about 4 hrs (for a 30 min project). At around 18-25% the kernel error pops up asking the restart the imac. If I attempt to render in selections of about 10 minutes a piece, it also results in kernel panic. If I take smaller peices at a time and render and keep saving, I am able to slowly get through rendering the project.
    Exporting the movie to quicktime as a self contained file, or even not self contained, also results in kernal panic about 40% of the way through.
    I have read on various forums about this and it seems like everyone is thinking it may have something to do with quicktime. What could the problem really be? I'm going crazy! Is the Imac just not able to handle final cut?
    Thanks!

    I've tried a few things to try and identify the problem, but none of them have helped.
    For instance, I completely turned off the  screen saver. In the preferences, under power saver, I selected, computer sleep to "never"; Display sleep to "never"; I unchecked the "put the hard disk to sleep when possible."
    And then I tried to only very small portion of the timeline.  The results were as follows:
    At around 5 minutes, the final cut crashes.  I tried this process several times, and it seems to render up until the 5 minute limit and then crashes again.
    Does anyone know what to do?

  • Kernel Panic and Ethernet Cable

    This seems too weird to be true, but my ethernet cable seems to have been responsible a kernel panic.
    At least this is what http://docs.info.apple.com/article.html?artnum=106464 says...
    ....If an Ethernet cable is connected to your computer, temporarily disconnect it and restart. If you have enabled NetInfo, you may need to temporarily disable it in the Directory Setup application....
    What can this mean?
    Here is the Kernel Panic log info and what I have been doing...
    Last night I installed SnapZ Pro 2 and registered it. I made it available to all users on the computer.
    Other suspicious activity... a co-worker sent a file that I thought was a AppleWorks doc, but was gibberish instead.
    This morning the iBook would not boot. Each attempt resulted in "kernel panic" screen. Ran TechTools. Found only minor errors in the Finder test.
    From another computer, I found article 106464 at doc.info.apple.com
    I tried safe boot (shift-boot). No kernel panic, but no boot either.
    I removed the ethernet cable.
    It booted.
    Unresolved kernel trap(cpu 0): 0x400 - Inst access DAR=0x000000000280402C PC=0x0000000000000000
    Latest crash info for cpu 0:
    Exception state (sv=0x213CD000)
    PC=0x00000000; MSR=0x40009030; DAR=0x0280402C; DSISR=0x40000000; LR=0x21BC8FA0; R1=0x0CCAB820; XCP=0x00000010 (0x400 - Inst access)
    Backtrace:
    0x0010916C 0x1CFDAE40 0x1CFDABEC 0x1CFD2918 0x002BDAC8 0x002BFEC0
    0x002BFCBC 0x212E1968 0x1CFDAA78 0x1CFE8DB8 0x1CFE8C4C 0x1CFEC4DC 0x1CFEC49C 0x002D1C84
    0x002EBA98 0x0008C4C0 0x0002921C 0x000233F8 0x000ABCAC 0x01A80F00
    Kernel loadable modules in backtrace (with dependencies):
    com.baltaks.driver.DoubleCommand(1.6.2)@0x21bc7000
    dependency: com.apple.iokit.IOHIDFamily(1.4.10)@0x1cfc9000
    com.apple.driver.AppleADBKeyboard(2.3.9)@0x212e0000
    dependency: com.apple.iokit.IOHIDFamily(1.4.10)@0x1cfc9000
    dependency: com.apple.iokit.IOADBFamily(8.0.0)@0x21209000
    com.apple.iokit.IOHIDFamily(1.4.10)@0x1cfc9000
    Proceeding back via exception chain:
    Exception state (sv=0x213CD000)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x20B86000)
    PC=0x9000B4C8; MSR=0x0200F030; DAR=0x0280402C; DSISR=0x42000000; LR=0x9000B41C; R1=0xBFFFF290; XCP=0x00000030 (0xC00 - System call)
    Kernel version:
    Darwin Kernel Version 8.9.0: Thu Feb 22 20:54:07 PST 2007; root:xnu-792.17.14~1/RELEASE_PPC
    panic(cpu 0 caller 0xFFFF0004): 0x400 - Inst access
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x000952D8 0x000957F0 0x00026898 0x000A8004 0x000AB980
    Proceeding back via exception chain:
    Exception state (sv=0x213CD000)
    PC=0x00000000; MSR=0x40009030; DAR=0x0280402C; DSISR=0x40000000; LR=0x21BC8FA0; R1=0x0CCAB820; XCP=0x00000010 (0x400 - Inst access)
    Backtrace:
    0x0010916C 0x1CFDAE40 0x1CFDABEC 0x1CFD2918 0x002BDAC8 0x002BFEC0
    0x002BFCBC 0x212E1968 0x1CFDAA78 0x1CFE8DB8 0x1CFE8C4C 0x1CFEC4DC 0x1CFEC49C 0x002D1C84
    0x002EBA98 0x0008C4C0 0x0002921C 0x000233F8 0x000ABCAC 0x01A80F00
    Kernel loadable modules in backtrace (with dependencies):
    com.baltaks.driver.DoubleCommand(1.6.2)@0x21bc7000
    dependency: com.apple.iokit.IOHIDFamily(1.4.10)@0x1cfc9000
    com.apple.driver.AppleADBKeyboard(2.3.9)@0x212e0000
    depende`Model: PowerBook6,7, BootROM 4.9.3f0, 1 processors, PowerPC G4 (1.2), 1.33 GHz, 512 MB
    Graphics: ATI Mobility Radeon 9550, ATY,M12, AGP, 32 MB
    Memory Module: DIMM0/BUILT-IN, 512 MB, built-in, built-in
    AirPort: AirPort Extreme, 405.1 (3.90.34.0.p18)
    Modem: Jump, V.92, Version 1.0
    Bluetooth: Version 1.7.14f14, 2 service, 0 devices, 1 incoming serial ports
    PCI Card: pci106b,4318, sppci_othernetwork, SLOT-B
    Parallel ATA Device: MATSHITACD-RW CW-8124, 743.43 MB
    Parallel ATA Device: FUJITSU MHV2040AT, 37.26 GB
    USB Device: Bluetooth HCI, Up to 12 Mb/sec, 500 mA
    USB Device: Apple Internal Trackpad, Apple Computer, Up to 12 Mb/sec, 500 mA

    I think the cause is not the Ethernet cablei you questioned. Try testing the Ethernet cable for the reproducibility with another computer that does not install "Baltaks DoubleCommand" kernel extension file. I am sure the Kernel Panic called the ISI Exception (0x00400) panic type will not occur. Although a configuration set for your Ethernet device with Baltaks DoubleCommand could impact on the Instruction Storage Interrupt exception.
    Typically, this type of the panic exceptions is caused by an attempt to execute an instruction at an invalid memory address, jumping to location zero-- in your case, it is "PC=0x0000000000000000" value on the program counter register in the microprocessor.
    You will now please focus on the exception state value 0x213CD000. The closest values to this exception are indicated with the following kernel extension files (.kext).
    - com.baltaks.driver.DoubleCommand(1.6.2)@0x21bc7000
    - com.apple.driver.AppleADBKeyboard(2.3.9)@0x212e0000
    - dependency: com.apple.iokit.IOADBFamily(8.0.0)@0x21209000
    Those loaded kernel extensions at the panic phase are a family that belongs to the same region of a source inside Mac OS X operating system. Thus, the first culprit is com.baltaks.driver.DoubleCommand. However, a preconfigured insufficient setting for/on the utility could face a mapping address collision to lead up to the panic.
    If you can still start up the computer in a safe-mode without the Ethernet cable, try removing the questioned file and other related files (if you install).
    Method 1: Using command lines should be the best way; I am afraid I do not know for the syntax. Find Michael Conniff for this help.
    "sudo touch /System/Library/Extensions" could be necessary before restarting the computer.
    Method 2: Manually remove the files onto the Desktop. Then, restart the computer.
    Method 3: "Archive and Install" or "Erase and Install" solution.

  • Kernel Panic resulting from force restart

    My MBP has gone into Kernel Panic and I am not certain how to resolve. By resolve, I mean get back to my desktop/applications The Kernel Panic resulted from a force restart, held down the Power button because I was attempting do a regular shutdown but was not able to force quit some applications..they seemed to be hanging. Safari was one, iPhoto...also I had just synced a new iPad2. Maybe I didn't disconnect the iPad2 properly? I did have anything connected to the MBP...
    I tried to startup in Safe Mode...but will not, just the kernel panic with instructions to hold down power button and restart...my MBP runs pretty well and I have never had a Kernel Panic since I bought it in August 2009
    I do have most of the files backed up using TimeMachine on an external drive...
    I have a my 15-inch MacBook Pro Mac Os X install DVD, that came with the Laptop...
    There might have been another DVD that came with the box set/ I also have my Snow Leopard upgrade DVD. I believe I was running 10.6.5 but I keep up with the System Software updates and I was also getting prompted to update to the latest 10.6.7, so maybe I had 10.6.6.
    So Kernel Panic is has never happened before, I didn't add anything, except for an iPad2 sync... but I believe that I got too impatient to shutdown when I couldn't force quit apps as quickly as I wanted too
    I think the Apple Software updater was open, although I did not initiate an update, other apps included: Microsoft Word Safari, iPhoto, iTunes, Dreamweaver, Adobe Illustrator CS..maybe Photoshop..Yeah I think I had too many apps open when I tried to force restart. In practice I do not force restart...usually never. So to recap, I got impatient, force restarted with way too many apps, some big apps open, and set off a kernel panic on my MBP with no other devices attached.
    I know part of the steps to recover involves booting from a DVD, but which one? The Mac OSX X Install DVD or the Snow Leopard Upgrade DVD? then...how to I get back to TimeMachine to do a restore if necessary?
    thanks in advance.
    Patrick

    Sadly,
    After running and completing the hardware test which is passed..I then booted off the Snow Leopard DVD and ran the Disk Utility and to Repair the Disk and it said the Disk is not repairable..
    Invalid Node Structure
    And told me to back up my files.
    So...I suppose the next steps:
    Try to run DiskWarrior, to either fix the Invalid Node Structure or at least
    retreive the files thru the HD preview.
    Boot off the Snow Leopard DVD and reformat the drive and then, I should plug my external hard drive back in with the save Time Machine Data and I can click Restore and pretty much get back what I had when Time Machine made its last back up?
    If Disk Warrior does not work. How can I try to get some files off the computer before I reformat the disk ... without using DiskWarrior? With or without DW I want to try a restore...
    Is it a best practice to reformat the HD and then do a "Restore" off a bootable DVD? This would eliminate any previous issues and start off with a sound drive as opposed to trying to go right to a "restore" procedure.
    Thanks again!

  • Kernel panic & loss of sound resulting from interrupted software update

    Help, please...I'm at a loss!
    In a nutshell:
    I had a software update (I think it was Safari) installing on my iMac when a power outage occurred. When I tried to start my computer, I got a gray screen with text (which I lacked the forethought to copy down, but it did have the words "kernel", "panic" and "mis-matched version" in it, I think), and a dark box in the center of the screen telling me "You may need to restart your computer. Hold down the Power button for several seconds or press the Restart button."
    I tried powering down a few times, but kept getting the same screen.
    I then tried starting up in safe mode, which at least got me to my desktop. Upon restarting normally, I can use/access the internet and almost all of my programs (EXCEPT Adobe CS3 - which now gives me a "the application quit unexpectedly" message every time I try to use any of the programs). I noticed also that my sound is GONE. When I try to adjust the volume, I get the gray "broken file" sign.
    I attempted to reset the PRAM, but nothing seems to have changed. I still have no sound.
    I can hear the start up sound (really loudly), so I know that, at least, is working, but nothing else.
    I'm not sure what I need to do next - do I need to have a Firmware Restoration CD? If so, which version? The 1.7 version does not list my computer's model identifier, and I definitely don't want to try to restore with the wrong version.
    Is there anything else I can do to resolve this issue? I don't live anywhere near an Apple store or any place that services Macs (I'm in rural Windows-only country), and I do not have AppleCare, so I'd really like to try to resolve this on my own if at all possible.
    Any help would be greatly appreciated. Thank you!

    What ever was being installed during the power outage has messed up a lot with your installation of Mac OS X when the installation abruptly stopped. I think that you should do an Archive and Install, which will Archive your old System and Install a new system with Mac OS X, leaving your personal files and user accounts as they are.
    You do this from you Install DVD that came with your Mac. These instructions are from Mac Help in the Help Menu of the Finder.
    +1. Insert the Mac OS X Install DVD and double-click the Install Mac OS X icon.+
    +2. Follow the onscreen instructions. In the pane where you select the destination disk, select your current Mac OS X disk (in most cases, it will be the only one available).+
    +3. Click Options.+
    +*a. If you want to save your existing files, users, and network settings, select “Archive and Install,” and then select “Preserve Users and Network Settings.”*+
    +b. If you want to erase everything on your computer and reinstall Mac OS X, select “Erase and Install.” You can’t recover erased data.+
    +4. Click Continue.+
    +5. Click Customize to select which parts of Mac OS X you’d like to install, or click Install to perform a basic installation (recommended).+
    +NOTE: If you selected “Erase and Install” in step 3, you may need to use the Applications Install DVD that came with your computer to reinstall your iLife applications (GarageBand, iPhoto, iMovie, iDVD, and iWeb). If you are prompted to use the Applications Install DVD, insert the Applications Install DVD, double-click the Install Bundled Software icon, and then follow the onscreen instructions.+
    You will need to update to the most recent versions of all your Apple apps and Mac OS X, as this A & I will dial the clock back to the versions of all the Apple software on your install DVD. You may need to reinstall 3rd party apps, such as from Adobe. You can drag & drop the archive system to the trash and discard it. It is no longer usable by your Mac. However, there are sometimes things in the archived system that folks fish out, but that really involves knowing for what you are fishing!
    The only way to avoid all of this work is if you happen to have a clone of your Mac saved to a backup dating from just before you started installing the update that was in progress when you were effected by the power outage.
    Dah•veed

  • Logging in Results in Constant Kernel Panics after 10.5- 10.6 Upgrade

    My Mac Pro w/ dual 2.8GHz Intel CPUs has been purring along just fine for the past year or so until yesterday. Yesterday I decided to upgrade from OS X 10.5.8 to 10.6.4. Since then I have been unable to work on my Mac. Shortly after login, I get a kernel panic and have to power off the machine. Its doesn't matter what account I log in with either.
    The one thing that does work consistently is if I boot up in safe mode. I don't get a kernel panic but the system does run rather slowly.
    I have tried clearing PRAM but that didn't make any difference. When I log in normally (ie; not in safe mode) I get a kernel panic within 10-30 seconds.
    Can someone help me isolate what is going on between booting in safe mode vs not. I'd much rather isolate the problem and fix it rather than just reload the OS (and everything else I've got configured on the system).
    Thanks in advance for any help!
    Ken Rahaim
    Digital Asset Management Branch
    Smithsonian Institution

    Ken Rahaim wrote:
    My Mac Pro w/ dual 2.8GHz Intel CPUs has been purring along just fine for the past year or so until yesterday. Yesterday I decided to upgrade from OS X 10.5.8 to 10.6.4. Since then I have been unable to work on my Mac. Shortly after login, I get a kernel panic and have to power off the machine. Its doesn't matter what account I log in with either.
    The one thing that does work consistently is if I boot up in safe mode. I don't get a kernel panic but the system does run rather slowly.
    Once booted into safe mode, launch the Console utility, and look under the various items (such as ~/Library/Logs) for a CrashReport or kernel panic item. (Sorry I can't be more specific. I haven't had a kernel panic on this Mac.) Look in each of those for a log file that might explain the problem.
    If you can't find such a log file, I'd look in /Library/Extensions to see if there are any items that might be incompatible.

  • Can too much memory lead to a kernel panic on a MacBook Pro? specs 2.4GHz intel core i7 16GB DDR3 RAM   late2011..My laptop began suffering from kernel panics 3 mos ago first noticed using public wifi. Gone thru apple support all the way to engineers

    Can too much RAM memory in a late 2011 model macbook pro lead to kernel panic? That is what I was told by a senior supervisor from apple support who troubleshot this issue.First noticed this problem in Dec 2014 while using a private wifi at a relative's home. Did not occur again until Feb1 using a public wifi at a hotel. Never happened on my private wifi network until last night  attempting to use airplay. ( have used airplay before without issue). Late 2011 MacBook Pro running 10.9.5; 2.4 GHz Intel core i7, 16 GB DDR3,AMD Radeon HD 6770m 1024 MB graphic card.  The laptop came with 8GB RAM and I installed 8 GB about 2 years ago for some reason I cannot remember... probably because I thought the system was slowing down a little. I know that sounds silly. I do not run multiple programs at a time except I leave 6-8 website tabs open simultaneously. I don't photo or video edit.  I would describe my use as "light"  based on reading these blogs.I had purchased apple support and spent hours on the phone with them in early Feb moving up through support  and senior support to sending logs to the "engineers." Of course lots of things were done some of which I am sorry to report I cannot recall their technical definitions. Deleted  3rd party apps/programs; re-worked start up menu; re-installed operating system; reset " this, that and the other" using acrobatic simultaneous key strokes both in and out of safe mode..Anyway the results from the engineers came back and they suggested that if it happened again I was to remove the 8GB of RAM I had installed as the system was getting confused as to which chip to use.( that is my interpretation of what was said..prob dumbed down for me)...Anyway 1 day after these pronouncements came down I read that Apple had agreed to fix  graphics cards in some late model 2011 MBPs. I felt this was unlikely to be the issue  given all that had been done including an extended hardware test but called the Senior Support Supervisor I was working with to ask him to make sure. He never phoned me back. Should I go to the trouble of removing 8GB of RAM from my laptop? Of course I will try it as the alternative is a new computer.Blogs read that this model can support 16GB but Apple didn't test for it. Senior Supervisor claims this is my trouble.  Does that make sense?  Not to me....but it is clear to all my level of knowledge.  Can a malfunctioning graphics card be missed by an extended hardware test? I appreciate comments.

    The RAM needs specs as shown below.
    Maximum Memory
    16 GB (Actual) 8 GB (Apple)
    Memory Slots
    2 - 204-pin PC-10600 (1333 MHz) DDR3 SO-DIMM

  • Usb + firewire issues = kernel panic - help needed!!

    Hello, and please forgive my english, I'll do my best!
    So, i have a 1,25 Ghz MDD G4, with 2 x 256 Mo RAM sticks (at first), running mac OS 10.3.9.
    As the original HD is too small, I work with my documents on an external firewire HD. The HD is plugged on a third party/PCI firwire card that went down.
    On the same day I bought a new firewire card (trendNet, it was said to be mac compatible form mac OS 8.6) and 4 x 512 Mo of Ram (Hynix).
    It worked just fine for a week and suddenly my mouse froze (and keyboard too > the mouse is plugged on the keyboard). Having no control on my mac (which seemed ok despite the usb deconnection) I had to hard reboot on the central Unit.
    I unplugged the usb hub that occupied mu 2nd usb port (there was a wacom tablet and a flsh memory key on it). I left just the keyboard plugged (and mouse plugged on keyboard).
    It was fine for... 2 or 3 hours and then it started again > mouse + keyboard deconnecting/freezing (the keyboard is a mac one, the mouse a microsoft one -optical-).
    As the small red optical light of the mouse turns off when the mouse freezes I first thought the mouse or keyboard itself was the culprit.
    I tested both of them them on a macbook and they worked just fine (never had a problem with them).
    I ran disk utility, repaired the permissions. And it seemed better for a couple of hours.
    When it happened again I unplugged the keyboard and plugged it on the 2nd usb port (which was free since I had unplugged everything else) > the mouse "came back to life" and I didn't have to reboot. But it happened again, like 2-3 times (every hour/half hour) until swapping the usb plug on the UC doesn't solve the problem anymore > hard reboot again...
    Then I tried EVERYTHING
    booting with techtool CD > everything ok, no pb found
    running onyx to empty the cash and rerepair the permissions > ibid, no pb
    resetting the PRAM with cmd-alt-p-r
    resetting the PMU
    resetting the usb and firewire ports after each hard reboot
    cleaning the dust
    removing my old scsi pci card (not used for ages)
    moving my new firewire card on an another slot
    installing a firmware update
    nothing has solved the problem... it seems to arrive randomly, but mostly (more frequently) when working with several apps open.
    The cursor seems to freeze for very very short periods (as a warning!) until it freezes for good > it's exactly as if the usb didn't deliver any electricity for micro laps of time (and it is the case I guess as my optical mouse light turns off).
    So I change the usb plug into the other port and it works for a while, just as if only one usb port was functional at a time, but it always ends with a hard reboot (no choice).
    It's always scary but it's also very annoying as my Western Digital Mybook external drive refuses to mount on desktop after hard reboots... I have to unplug it, replug it, restart etc... well this HD is a pain but I guess it's because it's in FAT 32 (since I forgot to format it when I bought it). So I don't bother too much about the HD itself, but however it seems that the firewire card suffers from this : I have a lot of trouble mounting 2 disks at a time (but with all this I need to backup!). It's like the fiwewire ports (of the pci card) suffered from the same pain as the usb : one at the time! and when I finally mount both external HDs, if I unplug one (after unmounting it and switching it off) the computer freezes.
    Then one day I opened itunes, and... kernel panic...
    That was 4 days ago I think and I've had like 3-4 KP since then (one a day). These kernel panic happen just as randomly as my usb deconnexions...
    Today I tried my last chance : removing the new Hynix ram and putting back my 2 old 256 rams.
    It was ok for a pair of hours and then > mouse freeze and kernel panic again...
    I reaaally need help, I don't know what to do anymore. I've spent my last week unplugging usb plugs, opening my UC, repairing permissions etc...
    now I feel helpless...
    Here are some extracts of console logs I've had :
    some :
    May 14 22:57:42 localhost kernel: 0 0 AppleUSBCDCECMData: probe - provider doesn't want us to match
    May 14 22:57:43 localhost kernel: 0 0 AppleUSBCDCWMCData: probe - provider doesn't want us to match
    May 14 22:57:43 localhost kernel: 0 0 AppleUSBCDCACMData: probe - provider doesn't want us to match
    tons and tons (but really!!) of these :
    AppleUSBOHCI[0x1382800]::MakeDevice error setting address. err=0xe00002ed device=0x1f16000 - releasing device
    May 14 23:08:26 localhost kernel: USBF: 715.217 IOUSBDevice[0x1654000]: Error (0xe00002ed) getting device device descriptor
    May 14 23:08:26 localhost kernel: USBF: 715.248 IOUSBDevice[0x1654000]: Error (0xe00002ed) getting device device descriptor
    May 14 23:08:26 localhost kernel: USBF: 715.279
    IOUSBDevice[0x1654000]: Error (0xe00002ed) getting device device descriptor
    May 14 23:09:02 localhost kernel: USBF: 750.962 IOUSBDevice[0x13e5600]: Error (0xe00002ed) getting device device descriptor
    May 14 23:09:02 localhost kernel: USBF: 750.993 IOUSBDevice[0x13e5600]: Error (0xe00002ed) getting device device descriptor
    May 14 23:09:02 localhost kernel: USBF: 751. 24 IOUSBDevice[0x13e5600]: Error (0xe00002ed) getting device device descriptor
    May 14 23:09:02 localhost kernel: USBF: 751. 28 IOUSBDevice[0x13e5600]: Error (0xe00002ed) getting device device descriptor
    May 14 23:09:37 localhost kernel: USBF: 786. 65 IOUSBDevice[0x2056d00]: Error (0xe00002ed) getting device device descriptor
    May 14 23:09:37 localhost kernel: USBF: 786. 96 IOUSBDevice[0x2056d00]: Error (0xe00002ed) getting device device descriptor
    May 14 23:09:37 localhost kernel: USBF: 786.127 IOUSBDevice[0x2056d00]: Error (0xe00002ed) getting device device descriptor
    May 14 23:09:37 localhost kernel: USBF: 786.131 IOUSBDevice[0x2056d00]: Error (0xe00002ed) getting device device descriptor
    May 14 23:10:09 localhost kernel: USBF:
    tons on this too :
    2136.248 AppleUSBOHCI[0x127f000] Watchdog detected dead controller (hcca #: 12727, hc #: 58749)
    May 15 00:56:15 localhost kernel: USBF: 2137.248 AppleUSBOHCI[0x127f000] Watchdog detected dead controller (hcca #: 12727, hc #: 59726)
    May 15 00:56:16 localhost kernel: USBF: 2138.248 AppleUSBOHCI[0x127f000] Watchdog detected dead controller (hcca #: 12727, hc #: 60703)
    May 15 00:56:17 localhost kernel: USBF: 2139.248 AppleUSBOHCI[0x127f000] Watchdog detected dead controller (hcca #: 12727, hc #: 61680)
    May 15 00:56:18 localhost kernel: USBF: 2140.248 AppleUSBOHCI[0x127f000] Watchdog detected dead controller (hcca #: 12727, hc #: 62657)
    May 15 00:56:19 localhost kernel: USBF: 2141.248 AppleUSBOHCI[0x127f000] Watchdog detected dead controller (hcca #: 12727, hc #: 63634)
    May 15 00:56:20 localhost kernel: USBF: 2142.248 AppleUSBOHCI[0x127f000] Watchdog detected dead controller (hcca #: 12727, hc #: 64611)
    May 15 00:56:34 localhost kernel: USBF: 2156.248 AppleUSBOHCI[0x127f000] Watchdog detected dead controller (hcca #: 12727, hc #: 13052)
    May 15 00:56:35 localhost kernel: USBF: 2157.248 AppleUSBOHCI[0x127f000] Watchdog detected dead controller (hcca #: 12727, hc #: 14029)
    May 15 00:56:36 localhost kernel: USBF: 2158.272 AppleUSBOHCI[0x127f000] Watchdog detected dead controller (hcca #: 12727, hc #: 15030)
    May 15 00:56:37 localhost diskarbitrationd[87]: disk2s9 hfs 6950CF0C-02C2-3F9E-B5D5-EFC293557C95 PowerMac Software /Volumes/PowerMac Software
    May 15 00:56:37 localhost kernel: USBF: 2159.272 AppleUSBOHCI[0x127f000] Watchdog detected dead controller (hcca #: 12727, hc #: 16007)
    May 15 00:56:38 localhost kernel: USBF: 2160.272 AppleUSBOHCI[0x127f000] Watchdog detected dead controller (hcca #: 12727, hc #: 16984)
    May 15 00:56:39 localhost kernel: USBF: 2161.272 AppleUSBOHCI[0x127f000] Watchdog detected dead controller (hcca #: 12727, hc #: 17961)
    May 15 00:56:40 localhost kernel: USBF: 2162.272 AppleUSBOHCI[0x127f000] Watchdog detected dead controller (hcca #: 12727, hc #: 18938)
    May 15 00:56:41 localhost kernel: USBF: 2163.272 AppleUSBOHCI[0x127f000] Watchdog detected dead controller (hcca #: 12727, hc #: 19915)
    May 15 00:56:53 localhost syslogd: exiting on signal 15
    May 15 01:17:06 localhost syslogd: restart
    May 15 01:17:06 localhost syslogd: kernel boot file is /mach_kernel
    May 15 01:17:06 localhost kernel: standard timeslicing quantum is 10000 us
    May 15 01:17:06 localhost kernel: vmpagebootstrap: 125572 free pages
    May 15 01:17:06 localhost kernel: migtable_maxdispl = 68
    May 15 01:17:06 localhost kernel: IOKit Component Version 7.9:
    May 15 01:17:06 localhost kernel: Wed Mar 30 20:07:52 PST 2005; root(rcbuilder):RELEASE_PPC/iokit/RELEASE
    May 15 01:17:07 localhost kernel: 82 prelinked modules
    May 15 01:17:07 localhost kernel: Copyright (c) 1982, 1986, 1989, 1991, 1993
    May 15 01:17:07 localhost kernel: The Regents of the University of California. All rights reserved.
    May 15 01:17:07 localhost kernel:
    May 15 01:17:07 localhost kernel: using 1310 buffer headers and 1310 cluster IO buffer headers
    May 15 01:17:07 localhost kernel: Local FireWire GUID = 0x110600:0x2a1bd
    May 15 01:17:07 localhost kernel: Local FireWire GUID = 0xa95ff:0xfeef67e0
    May 15 01:17:07 localhost kernel: Security auditing service present
    May 15 01:17:07 localhost kernel: BSM auditing present
    May 15 01:17:07 localhost kernel: From path: "/pci@f4000000/ata-6@d/disk@0:10,\mach_kernel", Waiting on <dict ID="0"><key>IOPathMatch</key><string ID="1">IODeviceTree:/pci@f4000000/ata-6@d/@0:10</string></dict>
    May 15 01:17:07 localhost kernel: Got boot device = IOService:/MacRISC2PE/pci@f4000000/AppleMacRiscPCI/ata-6@D/AppleKauaiATA/ATADev iceNub@0/IOATABlockStorageDriver/IOATABlockStorageDevice/IOBlockStorageDriver/ST 380011A Media/IOApplePartitionScheme/AppleHFS_Untitled2@10
    May 15 01:17:07 localhost kernel: BSD root: disk0s10, major 14, minor 9
    May 15 01:17:07 localhost kernel: AppleCPUThermo couldn't parse platform functions
    May 15 01:17:07 localhost kernel: Jettisoning kernel linker.
    May 15 01:17:07 localhost kernel: Resetting IOCatalogue.
    May 15 01:17:07 localhost kextd[84]: registering service "com.apple.KernelExtensionServer"
    May 15 01:17:10 localhost kernel: Matching service count = 0
    May 15 01:17:10 localhost kernel: AppleRS232Serial: 0 0 AppleRS232Serial::start - returning false early, Connector or machine incorrect
    May 15 01:17:10 localhost kernel: rtclock timebase_callback: late old 1000000000 / 41656700 new 1000000000 / 41656251
    May 15 01:17:13 localhost SystemStarter: Bienvenue sur Macintosh.
    May 15 01:17:14 localhost kernel: UniNEnet: Ethernet address 00:0a:95:ef:67:e0
    May 15 01:17:14 localhost kernel: IOFireWireIP: FireWire address 00:11:06:00:00:02:a1:bd
    May 15 01:17:14 localhost kernel: IOFireWireIP: FireWire address 00:0a:95:ff:fe:ef:67:e0
    May 15 01:17:14 localhost lookupd[125]: lookupd (version 324.13) starting - Thu May 15 01:17:14 2008
    May 15 01:17:15 localhost ConsoleMessage: Starting Apple Multicast DNS Responder
    May 15 01:17:15 localhost ConsoleMessage: Starting timed execution services
    May 15 01:17:15 localhost ConsoleMessage: Starting SecurityServer
    May 15 01:17:15 localhost SystemStarter: D?marrage du r?pondeur DNS multi-diffusion Apple
    May 15 01:17:15 localhost SystemStarter: D?marrage des services ? ex?cution diff?r?e
    May 15 01:17:15 localhost ConsoleMessage: Starting kernel event agent
    May 15 01:17:15 localhost mDNSResponder[147]: mDNSResponder-58.8.1 (Jan 31 2005 21:11:41) starting
    May 15 01:17:15 localhost mDNSResponder[147]: SetupAddr invalid sa_family 0
    May 15 01:17:15 localhost diskarbitrationd[87]: disk0s10 hfs 3A48DD89-B2C1-3D82-A158-1469A7237FD8 Sans titre /
    May 15 01:17:15 localhost diskarbitrationd[87]: disk1s9 hfs 6950CF0C-02C2-3F9E-B5D5-EFC293557C95 PowerMac Software [not mounted]
    May 15 01:17:16 localhost SystemStarter: Starting SecurityServer
    May 15 01:17:16 localhost SystemStarter: D?marrage de l?agent d??v?nement du kernel
    May 15 01:17:16 localhost ConsoleMessage: Initializing network
    May 15 01:17:16 localhost SystemStarter: Initialisation du r?seau
    May 15 01:17:16 localhost ConsoleMessage: Checking disks
    May 15 01:17:18 localhost kernel: UniNEnet::monitorLinkStatus - Link is up at 100 Mbps - Full Duplex
    May 15 01:17:18 localhost configd[86]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/set-hostna me
    May 15 01:17:19 localhost set-hostname[190]: setting hostname to ordi.local
    May 15 01:17:21 localhost kernel: ATY,Pheonix_A: vram [9c000000:04000000]
    May 15 01:17:21 localhost configd[86]: posting notification com.apple.system.config.network_change
    May 15 01:17:21 localhost configd[86]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/enable-net work
    May 15 01:17:21 localhost mach_init[2]: Server 2ac7 in bootstrap d03 uid 0: "/usr/sbin/lookupd": exited as a result of signal 1 [pid 125]
    May 15 01:17:21 localhost configd[86]: executing /System/Library/SystemConfiguration/Kicker.bundle/Contents/Resources/set-hostna me
    May 15 01:17:21 localhost lookupd[195]: lookupd (version 324.13) starting - Thu May 15 01:17:21 2008
    May 15 01:17:21 localhost ConsoleMessage: Starting network time synchronization
    May 15 01:17:21 localhost set-hostname[220]: setting hostname to ordi.local
    May 15 01:17:23 localhost kernel: ATY,Pheonix_B: vram [98000000:04000000]
    May 15 01:17:23 localhost SystemStarter: The "HasShadow" window property is obsolete. Use CGSSetWindowShadowAndRimParameters(cid, wid, 0.0,0.0, 0,0, CGSNoShadowStyle) to turn off the window shadow instead. Set a break-point on CGSLogMessage to find out where this property is set.
    May 15 01:17:23 localhost ConsoleMessage: Loading Shared IP extension
    May 15 01:17:23 localhost ntpdate[239]: ntpdate [email protected] Fri Sep 12 18:30:10 PDT 2003 (1)
    May 15 01:17:24 localhost ConsoleMessage: Starting printing services
    May 15 01:17:24 localhost ntpdate[239]: step time server 17.72.133.45 offset 0.090631 sec
    May 15 01:17:24 localhost ntpd[262]: ntpd [email protected] Fri Sep 12 18:30:03 PDT 2003 (1)
    May 15 01:17:24 localhost ntpd[262]: precision = 8 usec
    May 15 01:17:24 localhost ConsoleMessage: Starting network file system
    May 15 01:17:24 localhost diskarbitrationd[87]: disk2s1 msdos 00000000-0000-0000-0000-000000000000 My Book /Volumes/My Book
    May 15 01:17:24 localhost automount[288]: automount version 57
    May 15 01:17:24 localhost syslogd: /dev/console: Input/output error
    May 15 01:17:24 localhost init: kernel security level changed from 0 to 1
    May 15 01:17:24 localhost mach_init[2]: Server 0 in bootstrap d03 uid 0: "/usr/libexec/fix_prebinding": exited with non-zero status 1 [pid 301]
    May 15 01:17:24 localhost ConsoleMessage: Starting Apple File Service
    May 15 01:17:25 localhost automount[311]: automount version 57
    May 15 01:17:25 localhost ConsoleMessage: Starting Apache web server
    May 15 01:17:25 localhost /usr/sbin/AppleFileServer: Sent launch request message to DirectoryService mach_init port
    May 15 01:17:25 localhost DirectoryService[323]: Launched version 1.8.5 (v258.3)
    May 15 01:17:26 localhost ConsoleMessage: Loading IP Firewall extension
    May 15 01:17:27 localhost kernel: IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging disabled
    May 15 01:17:27 localhost kernel: IPv6 packet filtering initialized, default to accept, logging disabled
    May 15 01:17:27 localhost kernel: IP firewall loaded
    May 15 01:17:27 localhost ConsoleMessage: Starting internet services
    May 15 01:17:27 localhost /usr/sbin/httpd: Sent launch request message to DirectoryService mach_init port
    May 15 01:17:27 localhost xinetd[351]: xinetd Version 2.3.11 started with libwrap options compiled in.
    May 15 01:17:27 localhost xinetd[351]: Started working: 2 available services
    May 15 01:17:28 localhost automount[311]: logout notification received.
    May 15 01:17:28 localhost automount[311]: requesting logout processing.
    May 15 01:17:28 localhost automount[288]: logout notification received.
    May 15 01:17:28 localhost automount[288]: requesting logout processing.
    May 15 01:17:28 localhost automount[311]: handledeferredrequests: user logged out.
    May 15 01:17:28 localhost automount[288]: handledeferredrequests: user logged out.
    May 15 01:17:29 localhost kernel: 0 0 AppleUSBCDCECMData: probe - provider doesn't want us to match
    May 15 01:17:29 localhost kernel: 0 0 AppleUSBCDCWMCData: probe - provider doesn't want us to match
    May 15 01:17:29 localhost kernel: 0 0 AppleUSBCDCACMData: probe - provider doesn't want us to match
    May 15 01:17:29 localhost kernel: InternalUSBModem::setPowerState(1)
    May 15 01:17:32 localhost TabletDriver[362]: #### GetFrontProcess failed to get front process (-600)
    May 15 01:17:51 localhost diskarbitrationd[87]: SystemUIServer [376]:21019 not responding.
    May 15 01:17:52 localhost diskarbitrationd[87]: disk1s9 hfs 6950CF0C-02C2-3F9E-B5D5-EFC293557C95 PowerMac Software /Volumes/PowerMac Software
    May 15 01:19:39 localhost kernel: resize: max chain len 22, new table size 8192
    May 15 01:27:28 localhost lookupd[195]: NetInfo connection failed for server 127.0.0.1/local
    May 15 02:08:31 localhost kernel: USBF: 3107.389 AppleUSBOHCI[0x1281000]::MakeDevice error setting address. err=0xe00002ed device=0x12e8300 - releasing device
    and my last panic logs
    Mon May 12 14:45:14 2008
    Unresolved kernel trap(cpu 0): 0x300 - Data access DAR=0x000000006174696F PC=0x0000000000252638
    Latest crash info for cpu 0:
    Exception state (sv=0x3B912780)
    PC=0x00252638; MSR=0x00009030; DAR=0x6174696F; DSISR=0x40000000; LR=0x0053CB20; R1=0x1C55BC50; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x02AB8318 0x0053CB20 0x0053BEB0 0x00540044 0x005404F4 0x0053D538 0x00035148 0x00035028
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AppleUSBHub(2.1.5)@0x539000
    dependency: com.apple.iokit.IOUSBFamily(2.1.5)@0x471000
    Proceeding back via exception chain:
    Exception state (sv=0x3B912780)
    previously dumped as "Latest" state. skipping...
    Exception state (sv=0x2EE6AC80)
    PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
    Kernel version:
    Darwin Kernel Version 7.9.0:
    Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/RELEASE_PPC
    panic(cpu 0): 0x300 - Data access
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x00083498 0x0008397C 0x0001EDA4 0x00090C38 0x0009402C
    Proceeding back via exception chain:
    Exception state (sv=0x3B912780)
    PC=0x00252638; MSR=0x00009030; DAR=0x6174696F; DSISR=0x40000000; LR=0x0053CB20; R1=0x1C55BC50; XCP=0x0000000C (0x300 - Data access)
    Backtrace:
    0x02AB8318 0x0053CB20 0x0053BEB0 0x00540044 0x005404F4 0x0053D538 0x00035148 0x00035028
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AppleUSBHub(2.1.5)@0x539000
    dependency: com.apple.iokit.IOUSBFamily(2.1.5)@0x471000
    Exception state (sv=0x2EE6AC80)
    PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
    Kernel version:
    Darwin Kernel Version 7.9.0:
    Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/RELEASE_PPC
    Wed May 14 23:30:32 2008
    panic(cpu 0): Uncorrectable machine check: pc = 000000000070FE50, msr = 0000000000149030, dsisr = 42000000, dar = 00000000007D0000
    AsyncSrc = 0000000000000000, CoreFIR = 0000000000000000
    L2FIR = 0000000000000000, BusFir = 0000000000000000
    Latest stack backtrace for cpu 0:
    Backtrace:
    0x00083498 0x0008397C 0x0001EDA4 0x0009160C 0x000908F8 0x0009402C
    Proceeding back via exception chain:
    Exception state (sv=0x1FC42280)
    PC=0x0070FE50; MSR=0x00149030; DAR=0x007D0000; DSISR=0x42000000; LR=0x0070DBE4; R1=0x0CDBBD20; XCP=0x00000008 (0x200 - Machine check)
    Backtrace:
    0x0070DB8C 0x0070D808 0x00267FCC 0x00266EAC 0x00266E10
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AppleFWOHCI(2.2.10)@0x708000
    dependency: com.apple.iokit.IOPCIFamily(1.4)@0x398000
    dependency: com.apple.iokit.IOFireWireFamily(1.8.8)@0x407000
    Exception state (sv=0x1F638C80)
    PC=0x00000000; MSR=0x0000D030; DAR=0x00000000; DSISR=0x00000000; LR=0x00000000; R1=0x00000000; XCP=0x00000000 (Unknown)
    Kernel version:
    Darwin Kernel Version 7.9.0:
    Wed Mar 30 20:11:17 PST 2005; root:xnu/xnu-517.12.7.obj~1/RELEASE_PPC
    Is my mac dying?? Does all this come from defectible hardware? Is reinstalling a sysem a waste of time?

    philomene251 wrote:
    Hello, and please forgive my english, I'll do my best!
    My complements on that. While I read the post quickly, it was only later that I saw you're in Paris....
    Anyway, I'm not an expert on logs (system and panic ones), but from what I can tell there is a problem with the PCI USB/Firewire card you installed. It looks like it's the USB portion of the card; those are happing at startup when I'm pretty sure there's a kind of initial checking of the PCI cards.
    May 14 22:57:42 localhost kernel: 0 0 AppleUSBCDCECMData: probe - provider doesn't want us to match
    AppleUSBOHCI0x1382800::MakeDevice error setting address. err=0xe00002ed device=0x1f16000 - releasing device
    IOUSBDevice0x1654000: Error (0xe00002ed) getting device device descriptor
    2136.248 AppleUSBOHCI0x127f000 Watchdog detected dead controller (hcca #: 12727, hc #: 58749)
    The panics show dependencies to USB and FW:
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AppleUSBHub(2.1.5)@0x539000
    dependency: com.apple.iokit.IOUSBFamily(2.1.5)@0x471000
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.driver.AppleFWOHCI(2.2.10)@0x708000
    dependency: com.apple.iokit.IOPCIFamily(1.4)@0x398000
    dependency: com.apple.iokit.IOFireWireFamily(1.8.8)@0x407000
    The problems with the card at startup are probably creating an unstable condition, which in turn is causing kernel panics later on.
    Basic things first, whenever you change the hardware setup, e.g. RAM and adding cards, it's a really good idea to reset-PRAM. Did you do that? Try that first, it's simple and easy enough to try.
    If resetting the PRAM doesn't help, then try the new PCI card. I re-read your post a few times, but I haven't seen whether you tried removing the PCI FW/USB card to see if that helps. Try your mouse and some other devises on the native USB and FW ports. If you're stable, then it very well could be the card.
    Of course there's also the question of the RAM, which you pulled without help. Again, after any change of the hardware (adding RAM, pulling RAM, adding/pulling cards, etc.) even during testing, reset the PRAM at startup.
    With new RAM it's usually a good idea to test it, with say AHT CD or Rember. If you test, you might want to do this without the new card. It's a little tricky right now because you added 2 new pieces of HW (RAM and FW/USB card) either which or both could cause the problems you're seeing. OS X is picky about RAM, and the MDDs in particular are extremely picky about RAM as far as Apple HW is concerned.
    Lots of kernel panics can eventually cause damage to the OS X installation. So in the end, it may be worth re-installing. But, before you take that route. Try the simple things like removing the PCI FW/USB card & testing, and testing the RAM. Take it one step at a time.

Maybe you are looking for