Faxing with Internal Modem - Mac Mini and DSL

I have a first generation Mac Mini with an internal modem, and am trying for the first time to send a fax. I believe I've configured the faxing feature correctly through the print/fax preferences. I have DSL connected through ethernet. When I send the fax, it shows in the menu that it is dialing (but no sound), and then on the status window, it says it's on hold. It then redials in another 6 minutes or so and then same thing happens again--on hold. Eventually after several tries it disappears from the status window, and there's no indication that the task was completed.
What I'm wondering is, is it actually possible to fax using DSL? I called my ISP (Earthlink) who said I needed an external fax machine, that I couldn't fax with in internal modem. This led me to believe he had no idea what I was talking about. He referred me to Apple. I called but they are closed.
I'm trying to fax to a governmental office, so perhaps they are closed to, and that's why it isn't going through?
Or do I need to be doing something differently.
Help is appreciated.
Thanks,
Esther

Hi Esther Le Sieur: Unfortunately you can't fax through DSL. If you do have an internal modem you can certainly use that. You will need to use a regular phone line from the modem to a regular dial-tone jack. Depending on how your DSL is installed, you may have access to a regular dial-tone jack at or near where your DSL is connected.
Good Luck
Stedman

Similar Messages

My WRT310n won't work with my Appl Mac Mini and iPhone

Previously I had a weak signal using my WRT54G router. I usually got one or two bars in the house on my iPhone or Mac Mini. I recently "upgraded" to the WRT310N and now I cannot connect wirelessly at all on the mini and only one bar on the iPhone even with the phone inches away from the wireless router. I know these are both G devices, but I didn't expect performance to be worse than with my $49 54G router. Any suggestions?

Are your wireless settings still on auto? Try using the wide radio band with standard channels 1, 6 or 11.
The box said windows xp or better... So I installed Linux!

What display do you use with your 2005 Mac mini?

Hi all,
I was wondering which displays people are using with their 2005 Mac minis and
which (if any) adapters are necessary?
Thanks!
Mike

I'm using a Magnavox 15" LCD TV via it's VGA input on my day one mini. The original 2005 minis have a full sized normal DVI output and came with a DVI to VGA adapter. If yours no longer has that, it's the only adapter you'd need for most common computer monitors. Many newer monitors come with DVI already, so no adapter would be needed.

Graphite base station not working with my Intel Based Mac Mini and iPhone.

My Airport Express died after 2 years of use. I had to resort to plugging in my old but still functioning Graphite Airport base station. Since the set up assisant on my Mac mini does not work with the older base station, I used my G4 400 tower to set it up. I got it working and tested the connection. On to testing my iPhone. It sees the new network. Password is entered and the wifi icon shows full signal strength, but does not connect to the web. Next I try my Mac mini out on the new network and it too sees the network, but does not connect to the web. I double check the older G4 and the connection is still strong and fast. I shut the G4 down thinking that maybe the Graphite can only support one computer at a time, and the Mac mini and iPhone still can't connect to the web. I'm not sure what to do with this one. Is there a setting that I need to use? As far as security goes, the Graphite base station was set up with a WEP password. Any help would be great
Message was edited by: Soriano

I suggest using AirPort Admin Utility (version 4.2) to check the base station settings and change them, if necessary. (AirPort Admin Utility should be able to configure a Graphite base station from a computer running Mac OS X 10.4, even though AirPort Setup Assistant can't.)
In the Network pane of AirPort Admin Utility, please make sure that "Distribute IP addresses" and "Share a single IP address (using DHCP and NAT)" are checked, and that everything else is unchecked. I am assuming that the Graphite is the only router in your local network and that there are no computers connected via Ethernet.
The Access Control pane of AirPort Admin Utility should list either all of the relevant AirPort ID's or nothing. You can find the AirPort ID of an OS X computer by looking at System Preferences>Network>Show:AirPort>AirPort.
The Internet pane of AirPort Admin Utility should be set in accordance with your Internet provider's requirements. Most likely, it should be set to Connect Using:Ethernet and Configure:Using DHCP.
After verifying the settings, power down the computers, base station and cable or DSL modem for a few minutes, then start them up sequentially, leaving time for each to get fully up and running: first the modem, then the base station, and finally the computers.
The network preferences on the Mac Mini and the iPhone are also relevant. I assume that the preferences are unchanged from those that worked with the AirPort Express.
I hope this helps.

When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered my other computers on the Wi-Fi network could no longer access the printer. The manual says Maverick OS will not allow PC's to access the printer. Any thoughts?

When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered that my other computers on the Wi-Fi network could no longer access the printer. The manual says Maverick OS will not allow PC's to share the printer. Does anyone else have this problem? My printer does not have on-board Wi-Fi but, otherwise, works fine. I shouldn't have to buy a new one. Is there a OS patch out there that would open the printer port for my PC computers?

I'm assuming that on the Mac, the System Preferences -> Sharing -> Printer Sharing -> [X] HP printer -> Everyone can print is selected? That is to say, the Mac will allow anyone to print using the printer, and that you did not try to restrict who can print.
How is your network configured? Bonjour as a protocol will NOT cross a router boundary. If you have 2 or more subnets active with the PCs on one subnet and the Mac on another, that would block the PCs from seeing the Mac.
You could have multiple subnets if you have more than one router, such as an ISP provided broadband modem/router and another WiFi Router. If the PCs are talking to one router and the Mac is talking to another, that could be a 2 subnet situation. The additional routers must be put into bridge mode, which is done differently depending on the router. But the basics are to diable DHCP and NAT services on the secondary router(s) having just one active router on the network.
Also, using Bonjour Browser on my Mac, it is showing me that the printer is being advertised as using Internet Printing Protocol, so if that is something selectable on Windows, maybe you can bypass Bonjour on Windows.

Which USB external MODEM will work with the latest MAC MINI?

Can anyone recommend an external USB modem (other than Apple's) that will work with the latest MAC MINI?
Thanks!
Captain

Hello!
I am very happy with the APPLE USB MODEM "MA034"
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?find=ap ple%20usb%20modem#overview
You cannot find smaller and it never crashed or anything whatsoever.
Oh yes, and it is white!

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

I have a Mac Mini and I can't get it to work with my Ricoh Aficio MP 161. Any ideas?

The latest Apple driver support begins with the MP 171.
Here is Ricoh's official driver download page specifically for the Afico MP 161. Note that new drivers for this device were released on Aug 2, and include Lion and Mountain Lion.
Hopefully, this will solve your device issues.

I want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone

i want to hook up a mac mini and us my tv as a monitor. how can I use airplay from my phone on the mac mini like i can with an apple tv (without having to buy an apple tv!). the airplay capabilities i want to use are mirroring and streaming from my iphone!

Download AirPlayer for Mac - Transforms your Mac into an AirPlay-compatible display. MacUpdate.com

HT1719 I have music on my Shuffle and want to transfer it onto iTunes but when I go to Sync it, it warns me that all the music on my Shuffle will be deleted and replaced with what's on my iTunes. I have a new mac-mini and my old computer was an HP.

Can anyone tell me how to tranfer the music that is on my Shuffle to iTunes? When I go to Sync it, it gives me a warning that all the music on my Shuffle will be deleted and replaced with what is on my iTunes. I recently changed computers from an HP to a Mac-Mini and did not transfer/sync the itunes prior to getting rid of my itunes. So the music I had on itunes does not appear in my library. Help please!

See this excellent user tip from another forum member turingtest2 outlining the different methods and software available to help you copy content from your iPod back to your new Mac and into iTunes.
Recovering your iTunes library from your iPod or iOS device
Then proceed to do the Erase and Sync or restore the device.
B-rock

My airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

my airport time capsule will no longer allow our iPhones or vizio smart tvs to connect to it, though my iPad air mac mini and mac air connect fine. Why is this? does a recent software update have anything to do with it?

What model is your TC? What is the firmware?
I recommend you do a factory reset and use short names.. not apple recommended names.
Short.. 2-20 characters .. less than 10 even better.
No spaces.
Pure alphanumeric.
Set fixed channels for 2.4ghz wireless.. test with 11, 6, 1 at least.
That often helps.. if not and is old, ie Gen1-4 go back to 7.6.1 firmware which is far more solid.

I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo

I there, my question is quite simple, I would like to know if the "apple remote control" can be used with a mac mini and , if so, it can be used to control also the "logic pro" functions (e.g. record, start, stop etc). Thks a lot, Danilo

Good work, thanks for the report.

Problem with Mac Mini and Panasonic PT-AE700 projector

I just bought a brand new Mac Mini and intended to connect it through hdmi to my Panasonic PT-AE700 projector (with a 10 m hdmi-hdmi cable and a dvi-hdmi adapter). However there is no signal recognized by the projector.
Any suggestions? I have tried with two different dvi-hdmi adapters between the Mini and the cable. Both work fine with my MacBook Pro, but with the Mini there is no signal.
Mac Mini Mac OS X (10.4.7)

Thanks again BSteely for your answer.
Unfortunately I still haven't been able to get anything out from the projector through HDMI.
However, I've found someone with a similar problem. It seems the problem is the lenght of the HDMI cable (which in fact is closer to 15 m than 10 m). HDMI is designed to handle at least those 10-15 m runs, but the problem seems to be DVI, which is only capable of something around 5 m. Since I'm converting from DVI to HDMI, I'm subject to DVI's limitations. And the MBP seems to have better capability of handling the weaked signal than the Mini.
Read more: http://www.avsforum.com/avs-vb/showthread.php?t=712218
Gefen should have an amplifier (HDMI Super Booster) that could solve the problem. I just ordered it to see if it could help in strenghtening the signal and solve the problem for me.
Read more: http://www.gefen.com/kvm/product.jsp?prod_id=2939
If someone has any experience from the booster, please let me know.

Airport Express problems with new MAC MINI and DLINK router SOLVED

Hi just thought I would post this as it may well help others experiencing similar frustrations with new core duo mac mini and wireless connection or quality problems across the network / internet etc
I have a 3 week old, new mac mini core duo 1.8ghz 2gig ram, 120gb disk - First Mac, connecting to my exisiting wireless network via DLINK ADSL Router 2MB Broadband also one windows laptop and pc also wireless on the network and two airport express potins to stream itunes to
Problem was briefly
Mac worked fine, but the network connection just far too slow, laptop and pc, 1800+ kbps downstream mac mini 90 - 150kbps (http://www.adslguide.org/tools/speedtest.asp)
also if i ping the router directly from terminal (ping -c 20 192.168.1.1) average response 12+ ms with 20% packet loss, yet laptop and pc avg 2ms no losses
Spent 2 evenings on frustrating calls of more than 1 hour each (due to being cut off , then ring back and closed etc etc) and carrying out a the helpdesk troubleshooting (I am an IT consultant I think I am above this level), eventually an archive and install of the os as well
last night I call for the third time, insisting I dont wish to carry out any further troubleshooting, and want it replaced and resolved or my money back
I receive a call back from product specialist (not sure if thats mac mini specialist or airport) but we resolved the issue (his knowledge far superior to the help desk do this do this attitude)
between us we carried out the folowing and resolved the problem and I am now very happy
mac now downstreaming also in excess of 1800kbps (as expected for 2mb broadband)and no packet loss
This problem was resolved by switching off the turbo option hidden away in the routers settings, under wireless configuration
Supposed to improve performance, but its rubbish and will make hardly any difference under mac os to the speed but will certainly affect your mac mini performance(you may have a similar setting switched on in your routers and mac os dont like it)
We stumbled across this by first disconnecting one of the airport express devices from my dlink network, and using it on its own default apple wireless settings, effectively making it a standalone wireless network, and not via the dlink router
we then carried out the same ping with the ip address of this device (from airport admin utility default 10.0.1.1) and the results were fantastic 2ms avg no package loss
this established it was something with the router, and how we then interrogated the routers settings and found the turbo on option within wireless configuration
you may not be able to replicate this if you dont have an additional network you could join (such as airport express), but probably worth checking your own router settings for something similar
Hope that may be of assistance to others, sorry that its a bit long winded and garbled, but I'm just so excited to finally get my new mac working as i would expect it to
Also perhaps insist on speaking to a product specialist immediately that the helpdesk are unable to help you

Hello macfar14. Welcome to the Apple Discussions!
For just streaming iTunes and/or for sharing a USB printer, the AirPort Express Base Station (AX) just needs to be configured as a wireless client ... which you already attempted to do.
Just to be sure nothing was missed, here are the basic steps to do this:
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, make the following changes:
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing wireless network's Network Name or SSID>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked)

HT1338 I bought a new Mac Mini and tried to pair my keyboard with the Mac Mini. They will not pair via Bluetooth. What is wrong?

I have recently bought a Mac Mini and tried to pair the new apple wireless keyboard with the Mac but after trying 6 times no luck. What can I do about this?

try this method:
You need at least a USB mouse. If you don't get any option to pair a keyboard, click through the setup until you get to the "Create Your Computer Account" screen, right click in any of the text fields and select Substitutions --> Show Substitutions. From there click on text preferences. The preferences pane will popup and from there you can just click the back button (next to show all) to get to the full preferences menu. Next click on keyboard, then select setup bluetooth keyboard and you're golden.

I have been sync'ing my iPad 2 with Windows XP. Now I have a new mac mini and want to switch to this new computer. How do I save the info on my pad?

I have been syncing my I Pad 2 with a pc running windows xp. Now I have a new mac mini and want to switch the syncing to the mac. What do I do to protect the information and purchased apps on my I pad?

Backup and Restore
http://support.apple.com/kb/ht1766

Faxing with Internal Modem - Mac Mini and DSL

Similar Messages

Maybe you are looking for