FB 4.5 will not start on Windows 7 64 bit

I installed FB 4.5 on Windows 7 and when I try to start it I get this error:
C:\windows\system32\MSVCR71.dll is either not designed to run on windows or it contains an error....
I tried to run in Windows XP sp2 compatibility mode and I get this error:
Failed to load the JNI shared library "C:\Program Files(x86)\Adobe\Adobe Flash Builder 4.5\jre\bin\client\jvm.dll".
Any ideas on what to try next?
Thanks,
Ben

Thanks for figuring that out Ben.
When you say that Win7 sandboxed the application, what exactly do you mean by that? For example, did you find the missing dlls in your Virtual Store instead of in the system folder, or did you find them elsewhere? Also, was it your system folder that was sandboxed, or the Flash Builder folder?
Is there anything distinctive about how you have that machine configured, that might help us reproduce that problem here? For example, are you using any custom security settings, malware protection, or other such tools that might be involved?
That missing dll you mentioned in your earlier message was from a much older version of MSVC than what Flash Builder and the other CS5.5 apps install, so it's also likely that the MS merge modules failed to update the runtimes successfully. That can happen sometimes if permissions get locked down too tight on some areas of the system folder, such that even Admins can't install properly.
-Chris

Similar Messages

  • Organiziser in Photoshop Elements 9 will not start in Windows 8.1. Inkompartibelt programs.  What to

    Hej!
    Organiziser in Photoshop Elements 9 will not start in Windows 8.1. Inkompartibelt programs.
    What to do?
    /yoel

    Ok, I had many problems with the installation, but after three attempts I've got it working. This might work with a previously failed installation - but there are other guides in the forum to get this position -thanks also to the many threads on the this - which pointed me in the right direction
    Previously I'd had issues with Error 1935, (on Shared Technologies), Blue screens due to clbudf.sys from Cyberlink Instant burn which blue screened (thread abort exception) this install as also iTunes. (I haven't installed this now...
    My scenario. Win 7 (clean) -> Win 8 -> Win 8.1
    After setting up the setting up the system.
    I ensured the following : (although begrudingly) so I could do a system restore if needed.
    -I disabled Anitvirus & Firewall
    -enabled Volume Shadow Copy Service
    I then ensured I had downloaded Adobe Application Manager 8.0 (read this may help) - I installed - but I did not run it as I believe it updates to Adobe CC Manager( from previous attempts)
    i also downloaded and installed the 32 bit versions of :
    C++2008 redistributable (32 bit)
    C++2008 SP1 redistributable (32 bit)
    I installed Premiere Elements (64 bit) - note I had previously installed Sony Vegas 10 Platinum, which downloaded and installed NET 3.5/Net 2.0 adding to windows features, which many have helped - not sure.
    I installed Photoshop Elements (32 bit)
    I started both apps and updated them to 12.1.
    Happy ... finally - hope this helps others - or at least helps adobe improve their installer, diagnose the issue for others.

  • I just "upgraded"????? to Lightroom CC, now it will not start on Windows 7.  can someone help me?

    I had Lightroom 5 and the creative cloud photographer bundle.  upgraded (some joke) to Lightroom CC and no lightroom will not start on Windows 7.  just dead in the water. any help?

    The fix was to completely remove all Apple Software following guides in previous posts.
    Then download and re-install latest iTunes 64-bit, making sure to Run As Administrator.
    This fixed it. Now the next thing seems to be that as I move from one device to another to close and restart iTunes between each one. Treat it gently. It seems to break easily and a lot.

  • Itunes 10 will not load on windows 7 64 bit. Error code 2324. Old Itunes is gone or not working. Cannot play anything although files are still there. What the ??? is error 2324. Seems like alot of people ar ehaving the same problem

    Itunes 10 will not load on windows 7 64 bit. Error code 2324. Old Itunes is gone or not working. Cannot play anything although files are still there. What the ??? is error 2324. Seems like alot of people ar ehaving the same problem

    I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
    http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
    I hope this helps you and any other users.

  • CS3 will not install on Windows 7, 64-bit. No error message. Just stops installing.

    CS3 will not install on Windows 7, 64-bit. No error message. Just stops installing. This is a brand new machine. This is one of the first things I'm installing on it. I'm running Windows 7 Home Premium 64-bit. The disks are fine. I have the programs installed on my two XP machines. When I run the disk, I get the window pop up that says "Initializing Installation for Adobe Creative Suite 3". Then the disk stops spinning and nothing else happens. No error message. Nothing else happens. I'm baffled. I have searched several discussion boards and cannot find anybody that has had a similar install issue like this.

    Old_Timer I would recommend reviewing your install logs to determine the exact error message.  You can find details on how to locate and interpret the logs at Troubleshoot installation with install logs | CS3, CS4 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-install-logs-cs3.html.

  • Tungsten t3 will not sync with Windows 7 64 bit using cradle sync

    Tungsten t3 will not sync with Windows 7 64 bit using cradle sync any suggestions?

    Try a low-tech solution.  Check the condition of the HotSync port connection on both the T3 and the cradle.
    Look for any possible corrosion, coating, or bent fingers in the cradle.  Sometimes a good cleaning with either Contact cleaner or isopropyl alcohol can work miracles!   (Use a q-tip swabbed in it, do not pour it onto the PDA).
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Current version of itunes will not open in windows 7 64 bit

    itunes will not open from windows 7 64 bit. It is the current version of itunes....can't sync ipad.

    Hey ArborBarber,
    I understand that you are having issues with iTunes launching on your Windows 7 machine. The following article may provide more help in troubleshooting:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    http://support.apple.com/kb/TS1717
    Thanks,
    Matt M.

  • Firefox version 3.5.16 will not start under Windows Vista and Windows 7 32bit

    I have a Windows Vista computer that will not start any newer version of Firefox than 3.5.16. The process will run (as seen in the Task Manager) but do nothing.
    I have since updated Windows to version 7 and the problem persists.
    I have tried uninstalling Firefox and all Addons (flash-player, pdf-reader) and deleting all files (even user-specific ones).
    Firefox can't be started in Profilemanger or safe-mode either.
    Is there anything short of reinstalling windows I can try?

    Solved it!
    It was a dodgy version of Firebug (1.6.2) running, which would kill the disable/update process. It was killing something on the first run that would corrupt my Firefox.
    How I fixed it:
    * Download the latest Firefox
    * Install Firefox 4 (as Standard) in-place upgrade
    * Before finishing, un-tick the "Run Firefox Now" button
    * Hit Finish
    * Find Firefox in the Start Menu and hold Shift and click the executable (safe mode)
    * Leave everything disabled
    * You should now have a working Firefox!
    Remove/update your add-ons as needed. I only had to upgrade Firebug in safe mode to get it working.
    Odd how the check for updates completely broke this Firefox, wonder what was so bad about Firebug.
    Hope this helps at least one other person! The "Run in Safe Mode" option is so hard to discover now when your browser is broken!

  • System will not start login Window

    I have a 10.4.5 workstation that will not start the login window.
    It comes up very quickly with the box/progress bar that shows the starting services. Then it goes to the blue screen with the spinning wheel. It will the get a beachball that goes to a useable mouse, but there is only lots of blue real estate. Login window never comes up.
    I have done the following in the order listed:
    disk utility
    fsck
    repaired permissions
    renamed com.apple.loginwindow.plist
    replaced the netinfo DB
    each reboot only produces the same screen with a cursor and nothing else.

    I had a similar looking problem on not one but two laptops after upgrading to 10.4.7 (which incorporates several Security Updates) from various lower Tiger versions. In my case, booting to single user mode showed loginwindow continually falling over & being restarted.
    They wouldn't boot from CD or external firewire drives.
    I eventually got them back up by booting in firewire target mode & applying the 10.4.7 Combo updater.

  • Desktop Software will not open in WIndows 7 64 bit

    Hello
    I have downloaded versions 6.0.1, 6.0.2 and 6.1 of BlackBerry Desktop SOftware separately and after uninstalling the version I set up. In each case set up goes fine and a shortcut comes up and I select to start automatically after the setup, but when the program starts it hangs on the bb logo and goes no further. It is not even listed in the Task Manager as running. The same happens when I double click on the shortcut. I try running it in all the compatibility modes from WIndows XP SP 3 to Vista SP2 and the program just hangs without opening. I clean my Registry and I run the same downloaded program (transfer via flash drive) on another computer running WIndows vista SP 2 and it opens perfectly on that other computer so the downloaded fiel is fine.. I do not have another windows 7 64 bit computer to try to see if there is something on my computer that is causing the problem. Help!

    Hello
    I am using a Windows 7 64 bit computer which is why i said , "I do not have another windows 7 64 bit computer to try to see if there is something on my computer". The fact that it worked on yours suggests there is something on my computer that is causing the problem. Did you run it as administrator and in Window 7 compatibility mode, or as downloaded (which is Windows XP SP 3 by default)?
    Thanks

  • In XP Mode on Windows 7, after installing application as like I would normally on an actual XP system, application will not start in windows XP mode itself.

    Just did a clean install of windows 7.  I then downloaded windows XP mode and Windows Virtual Mode.  Everything ran flawlessly and everything is updated.  I needed to Install a program called Dentrix 10.5 which can only be installed on Windows
    XP for numerous reasons and one including it needing to use Microsoft .NET 1.0.  I installed this program on Windows XP Mode as I would as if I were installing it with a computer with windows XP.  The Install of the program went fine and completed.
     Still being in Windows XP Mode I wanted to see how it would run.  I hit Start Menu, All Programs, Startup Programs, and clicked on the Dentrix Application.  Once I clicked it the time glass on the  mouse was there for a few seconds and
    then went away without the application starting up at all.  One thing that I'm thinking is why after I clicked Start Menu, All programs, is why was Dentrix not in its own folder and instead in the Startup programs after All programs?  Any Ideas how
    to get the program to run?  Like I said, I am trying to run the program in Windows XP Mode and not Windows 7 as I have found many Q's and A's on only how to do that.  Also this is the second application which I downloaded and the first being Microsoft
    Security Essentials so I know I don't have some virus from keeping from opening the Dentrix Application.  Incase you are wondering the Microsoft Security Essentials opens and runs fine in Windows XP Mode.  So Pretty Much My Main question is: Why
    my application not starting up in Windows XP Mode?  Any help is greatly appreciated! 

    Once I clicked it the time glass on the mouse was there for a few seconds and then went away without the application starting up at all.
    A couple times a week I open Dentrix 11.0 in a virtual machine on Windows 7. I experience the same thing almost every time I open the VM. I must first get Windows to "reconnect" my network for me. Do this by opening Start | My Computer, and
    double-click on the mapped network drive leading to the Dentrix data. After I can see the Dentrix data drive, Dentrix will be able to read it too and will open correctly.
    In Dentrix, seeing nothing (or briefly seeing a hourglass and then seeing nothing) is a classic sign that either:
    - The database files are marked as Read Only
    - The program cannot access the data files (probably the folder it is pointed to does not contain any data).
    - Or possibly the database path does not point to the right location where the data files are located
    Open the folder where you installed the program files of Dentrix (probably c:\program files\dentrix\) and double-click to run EP.EXE. The database path will be revealed. You can "Browse" to the correct location, and "OK" through the dialog to
    close them. Then try opening Dentrix again.
    Should that not work, open Start | My Computer, and try to open the path (starting with the drive letter, then the folder structure you saw in EP.EXE).
    By the way, if your path uses UNC (starting with two back-slashes and then the computer name of the server), you'll need to map a network drive and replace your path with a mapped drive path. (Map a drive in Start | My Computer | Tools | Map Network
    Drive). Dentrix really doesn't like UNC paths.
    Dentrix 10.5 can only be installed on Windows XP
    Microsoft .NET 1.0
    Just FYI, Microsoft .Net Framework 1.0 is required only for the "Time Clock" feature of Dentrix. Windows 7 already has .NET Framework features up to version 3.5 built in, and Time Clock (in my experience) works great under Windows 7 without installing
    .NET 1.0.
    Have you tried installing directly in Windows 7? I have a specific reason why I don't (I have a newer version of Dentrix installed on my Win 7 machine, and use the VM to go back to an older database occasionally - so I can't mix two different program versions
    on the same machine). If you were to try installing this program under Windows 7 directly, Dentrix will launch the Microsoft .NET Framework install after the Dentrix install is completed. Just cancel out at that point (Windows will probably give you an "incompatibility"
    error message anyway before allowing the install to go through) and I believe you can run it under Windows 7. That might eliminate the networking-through-the-VM issue. So, if you have no other reason not to install Dentrix on your Windows 7 machine directly,
    I'd try it. You might be surprised and if it works, you'd save yourself some headache with connecting the to network through the virual machine.
    Is why was Dentrix not in its own folder and instead in the Startup programs after All programs?
    During the installation, on the Select Program Folder screen, you must have clicked the "Startup" option under Existing Folders. By default, "Dentrix" will be typed into the box at the top. If you simply clicked Next, it would have gone
    to the correct location. The screen is a little confusing, because something in the list will be highlighted by default, but what is typed into the box at the top will actually be used.

  • SQL Express 2008 R2 will not start on Windows 7 Home

    Ok, This used to work, and then over night my system rebooted and now I cannot start SQL Express 2008 R2 after I have unistalled, and re-installed.   Cleared out the folders and the certificates, changed the Named Pipes configuration and all to
    no avail.   Here is my log file.
    -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
    2014-06-14 08:45:18.18 Server      Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64)
        Jun 17 2011 00:54:03
        Copyright (c) Microsoft Corporation
        Express Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
    2014-06-14 08:45:18.18 Server      (c) Microsoft Corporation.
    2014-06-14 08:45:18.18 Server      All rights reserved.
    2014-06-14 08:45:18.18 Server      Server process ID is 8924.
    2014-06-14 08:45:18.18 Server      System Manufacturer: 'SAMSUNG ELECTRONICS CO., LTD.', System Model: '700Z3A/700Z4A/700Z5A/700Z5B'.
    2014-06-14 08:45:18.18 Server      Authentication mode is MIXED.
    2014-06-14 08:45:18.18 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG'.
    2014-06-14 08:45:18.18 Server      This instance of SQL Server last reported using a process ID of 2820 at 6/14/2014 8:32:55 AM (local) 6/14/2014 1:32:55 PM (UTC). This is an informational message only; no user action is required.
    2014-06-14 08:45:18.18 Server      Registry startup parameters:
         -d C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\master.mdf
         -e C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG
         -l C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\mastlog.ldf
    2014-06-14 08:45:18.18 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
    2014-06-14 08:45:18.18 Server      Detected 8 CPUs. This is an informational message; no user action is required.
    2014-06-14 08:45:18.21 Server      Using dynamic lock allocation.  Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node.  This is an informational message only.  No user action is required.
    2014-06-14 08:45:18.23 Server      Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational
    message only. No user action is required.
    2014-06-14 08:45:18.25 spid7s      Starting up database 'master'.
    2014-06-14 08:45:18.28 spid7s      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'ACT7'.
    2014-06-14 08:45:18.29 spid7s      SQL Trace ID 1 was started by login "sa".
    2014-06-14 08:45:18.29 spid7s      Starting up database 'mssqlsystemresource'.
    2014-06-14 08:45:18.30 spid7s      The resource database build version is 10.50.2500. This is an informational message only. No user action is required.
    2014-06-14 08:45:18.32 spid7s      Server name is 'MARTINDAHL-PC\ACT7'. This is an informational message only. No user action is required.
    2014-06-14 08:45:18.32 spid10s     Starting up database 'model'.
    2014-06-14 08:45:18.32 spid7s      Informational: No full-text supported languages found.
    2014-06-14 08:45:18.32 spid7s      Starting up database 'msdb'.
    2014-06-14 08:45:18.33 Server      Error: 17190, Severity: 16, State: 1.
    2014-06-14 08:45:18.33 Server      Initializing the FallBack certificate failed with error code: 1, state: 1, error number: -2146893802.
    2014-06-14 08:45:18.33 Server      Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
    2014-06-14 08:45:18.33 Server      Error: 17182, Severity: 16, State: 1.
    2014-06-14 08:45:18.33 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
    2014-06-14 08:45:18.33 Server      Error: 17182, Severity: 16, State: 1.
    2014-06-14 08:45:18.33 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
    2014-06-14 08:45:18.33 Server      Error: 17826, Severity: 18, State: 3.
    2014-06-14 08:45:18.33 Server      Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
    2014-06-14 08:45:18.33 Server      Error: 17120, Severity: 16, State: 1.
    2014-06-14 08:45:18.33 Server      SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
    -=-=-=-=-=-=-=-=-=-=
    I am logged into either the Administrator Account or my Account in which I am in the Adminstrator Group or an Admin.   My OS is Windows 7 Home Premium Edition, so I cannot clear out the MSSQL groups and things I have seen online.  Since this
    is Express, there is limited capabilities with the config tool.  
    I have tried to change the log in as in the SQL Configuration tool and every item I check, Local Service, Local System, Network Service all give the same error,
    "Cannot Find Object or Property. [0x80042004]
    SInce I have Home Premium, MMC will not load the snap in for Local Users and groups to check out these items.
    A check of the net user shows only the Administrator, Guest and my local login in Admin Account.  net localgroups show these items.
    *Administrators
    *Distributed COM Users
    *Event Log Readers
    *Guests
    *HomeUsers
    *IIS_IUSRS
    *IIS_WPG
    *Performance Log Users
    *Performance Monitor Users
    *SQLServer2005SQLBrowserUser$MARTINDAHL-PC
    *SQLServerFDHostUser$MartinDahl-PC$ACT7
    *SQLServerMSSQLServerADHelperUser$MARTINDAHL-PC
    *SQLServerMSSQLUser$MartinDahl-PC$ACT7
    *SQLServerSQLAgentUser$MARTINDAHL-PC$ACT7
    *Users
    The command completed successfully.
    I checked the SSL and Force Encryption is set to no and the certificates have been cleared.  
    I am not sure how to solve this problem.   Please help.   Thanks, in advance. 

    I created a new Administrator account on the machine, mdahl.   I then started the SQL Configuration Tool and changed the log on to this new account.  Same problem.   Here is the SQL Log.
    2014-06-14 11:24:15.83 Server      Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64)
        Jun 17 2011 00:54:03
        Copyright (c) Microsoft Corporation
        Express Edition (64-bit) on Windows NT 6.1 <X64> (Build 7601: Service Pack 1)
    2014-06-14 11:24:15.83 Server      (c) Microsoft Corporation.
    2014-06-14 11:24:15.83 Server      All rights reserved.
    2014-06-14 11:24:15.83 Server      Server process ID is 11448.
    2014-06-14 11:24:15.83 Server      System Manufacturer: 'SAMSUNG ELECTRONICS CO., LTD.', System Model: '700Z3A/700Z4A/700Z5A/700Z5B'.
    2014-06-14 11:24:15.83 Server      Authentication mode is MIXED.
    2014-06-14 11:24:15.83 Server      Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG'.
    2014-06-14 11:24:15.83 Server      This instance of SQL Server last reported using a process ID of 5952 at 6/14/2014 11:21:35 AM (local) 6/14/2014 4:21:35 PM (UTC). This is an informational message only; no user action is required.
    2014-06-14 11:24:15.83 Server      Registry startup parameters:
         -d C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\master.mdf
         -e C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\Log\ERRORLOG
         -l C:\Program Files\Microsoft SQL Server\MSSQL10_50.ACT7\MSSQL\DATA\mastlog.ldf
    2014-06-14 11:24:15.83 Server      SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
    2014-06-14 11:24:15.83 Server      Detected 8 CPUs. This is an informational message; no user action is required.
    2014-06-14 11:24:15.87 Server      Using dynamic lock allocation.  Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node.  This is an informational message only.  No user action is required.
    2014-06-14 11:24:15.88 Server      Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational
    message only. No user action is required.
    2014-06-14 11:24:15.90 spid7s      Starting up database 'master'.
    2014-06-14 11:24:15.91 spid7s      1 transactions rolled forward in database 'master' (1). This is an informational message only. No user action is required.
    2014-06-14 11:24:15.91 spid7s      0 transactions rolled back in database 'master' (1). This is an informational message only. No user action is required.
    2014-06-14 11:24:15.91 spid7s      Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required.
    2014-06-14 11:24:15.92 spid7s      FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'ACT7'.
    2014-06-14 11:24:15.93 spid7s      SQL Trace ID 1 was started by login "sa".
    2014-06-14 11:24:15.93 spid7s      Starting up database 'mssqlsystemresource'.
    2014-06-14 11:24:15.93 spid7s      The resource database build version is 10.50.2500. This is an informational message only. No user action is required.
    2014-06-14 11:24:16.03 spid7s      Server name is 'MARTINDAHL-PC\ACT7'. This is an informational message only. No user action is required.
    2014-06-14 11:24:16.03 spid10s     Starting up database 'model'.
    2014-06-14 11:24:16.03 spid7s      Informational: No full-text supported languages found.
    2014-06-14 11:24:16.03 spid7s      Starting up database 'msdb'.
    2014-06-14 11:24:16.03 Server      Error: 17190, Severity: 16, State: 1.
    2014-06-14 11:24:16.03 Server      Initializing the FallBack certificate failed with error code: 1, state: 1, error number: -2146893802.
    2014-06-14 11:24:16.03 Server      Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
    2014-06-14 11:24:16.03 Server      Error: 17182, Severity: 16, State: 1.
    2014-06-14 11:24:16.03 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
    2014-06-14 11:24:16.03 Server      Error: 17182, Severity: 16, State: 1.
    2014-06-14 11:24:16.03 Server      TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
    2014-06-14 11:24:16.03 Server      Error: 17826, Severity: 18, State: 3.
    2014-06-14 11:24:16.03 Server      Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
    2014-06-14 11:24:16.03 Server      Error: 17120, Severity: 16, State: 1.
    2014-06-14 11:24:16.03 Server      SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
    Also, the link you provided is to Windows Vista, not Windows 7 Home Premium.  However, I did look at the registry setting they said to look at in the link.
    Locate the following registry subkey:
    HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList
    Under the ProfileList subkey, delete the subkey that is named <var>SID</var>.bak.
    Note <var>SID</var> is a placeholder for the security identifier (SID) of the user account that is experiencing the problem. The <var>SID</var>.bak subkey should contain a ProfileImagePath registry entry that points to the original profile
    folder of the user account that is experiencing the problem.
    Exit Registry Editor.
    Looking into my registry for my ProfilesList as mentioned. I have these items.
    S-1-5-19 Folder with Default (Value not set), Flags (REG_DWORD) 0x0000000, ProfileImagePath (REG_EXPANDS_SZ) C:Windows\ServiceProfiles\LocalService, State (REG_DWORD) 0x0000000
    S-1-5-20 Folder with Default (Value not set), Flags (REG_DWORD) 0x0000000, ProfileImagePath (REG_EXPANDS_SZ) C:Windows\ServiceProfiles\NetworkService, State (REG_DWORD) 0x0000000
    Then I have an item for each of my three accounts, Administrator, Martin Dahl, and mdahl, All admin Accounts, which has no sid.bak, but a Sid, so not sure how this link helps me either.   Still looking for assistance.  Still not starting.

  • Bridge CS6 will not start in Windows 7

    Bridge CS6 (both 32 and 64) don't start in Windows 7. 
    Bridge starts in Task Manager for a few seconds, but goes away.  No errors, no logs.
    I have tried all the suggestions I've found within the forums, including checking settings,, temp environment variables, deleting C:\Users\[your user name]\AppData\Roaming\Adobe\Bridge CS6 (including the directory itself), etc.  No luck.   Adding a new user, then using it to start Bridge worked great, but that is not really a solution.  One added piece of info:  Bridge did recreate the above directory before dying, although it remains empty.  I haven't found any logfiles that might help understand how far it got.   Is there a log file or a registry setting that will enable detailed logging to help diagnose this?
    I managed to gather a temp xml file that has some info that might help.  This file shows up for the few seconds when Bridge is running.
    <?xml version="1.0" encoding="UTF-16"?>
    <WERReportMetadata>
    <OSVersionInformation>
      <WindowsNTVersion>6.1</WindowsNTVersion>
      <Build>7601 Service Pack 1</Build>
      <Product>(0x1): Windows 7 Ultimate</Product>
      <Edition>Ultimate</Edition>
      <BuildString>7601.17835.amd64fre.win7sp1_gdr.120503-2030</BuildString>
      <Revision>1130</Revision>
      <Flavor>Multiprocessor Free</Flavor>
      <Architecture>X64</Architecture>
      <LCID>1033</LCID>
    </OSVersionInformation>
    <ParentProcessInformation>
      <ParentProcessId>3996</ParentProcessId>
      <ParentProcessPath>C:\Windows\explorer.exe</ParentProcessPath>
      <ParentProcessCmdLine>C:\Windows\Explorer.EXE</ParentProcessCmdLine>
    </ParentProcessInformation>
    <ProblemSignatures>
      <EventType>APPCRASH</EventType>
      <Parameter0>Bridge.exe</Parameter0>
      <Parameter1>5.0.0.399</Parameter1>
      <Parameter2>4f5ec28e</Parameter2>
      <Parameter3>Bridge.exe</Parameter3>
      <Parameter4>5.0.0.399</Parameter4>
      <Parameter5>4f5ec28e</Parameter5>
      <Parameter6>c0000005</Parameter6>
      <Parameter7>000000000036ae49</Parameter7>
    </ProblemSignatures>
    <DynamicSignatures>
      <Parameter1>6.1.7601.2.1.0.256.1</Parameter1>
      <Parameter2>1033</Parameter2>
      <Parameter22>dca5</Parameter22>
      <Parameter23>dca5eef3eb4639786ac397e2f866e6e1</Parameter23>
      <Parameter24>cde9</Parameter24>
      <Parameter25>cde994f1594c84823c9c1be215d1d32c</Parameter25>
    </DynamicSignatures>
    <SystemInformation>
      <MID>C1C89176-2E22-457C-8B68-F9633BDBDBAB</MID>
      <SystemManufacturer>System manufacturer</SystemManufacturer>
      <SystemProductName>System Product Name</SystemProductName>
      <BIOSVersion>0303</BIOSVersion>
    </SystemInformation>
    </WERReportMetadata>
    There is obviously something in my normal user's profile or environment that is getting in the way of startup.  Yes, my normal user is an admin. You (Adobe) have the code and the startup can't be that convoluted. Someone should be able to walk the code, figure out what things are checked between creating the above directory and the next externally detectable step (like creating a file in this directory or logging something into a log file), then reply here with a list of specific things to check.
    I got into a chat with Adobe support several days ago, where I went through several steps of ensuring I was using a properly licensed version only to be told that he didn't know Bridge and asked that I call during the day on Monday. The sign off message to that chat was funny - they mentioned 24x365 support :-) Luckily, I've worked support in my past and I have a sense of humor.
    I tried to file a bug form the web, but failed to navigate the amazingly bad support web experience of Adobe.com.  At one point, I had found a place to do it, pasted the above into that window, then tried to submit - I wasn't logged in.  So, I clicked the login link and got an error pop-up window with a bad-link error.  I came in fresh - logged in, then could not find that "report a bug" screen again.  Truly amazing.  But I guess, if you cannot report a bug, it doesn't exist - so congratulations on your bug-free products.
    A suggestion:
    Provide a simple link to report a bug that's not tied to a service plan.  It would simply be a way to tell you about problems with the hope that a solution could be provided in a future release - these can optionally be logged to the forums for community involvement.  I don't mind logging in to prove I'm a valid user.

    Adobe staff has to browse these forums on their own time (I know that should be part of their job) so their visits are infrequent.
    There are several sites to report bugs which seems to be counterproductive.   I think this one has the most support right now. http://feedback.photoshop.com/photoshop_family
    And you are sure you are not running Bridge CS5 in the background?  You can only run one Bridge program at any one time.
    In both the Mac and Win OS seems like the workaround to create a new user works frequently, but it is a hassle.  In your problem solving did you unistall everything then run the Adobe Script Cleaner? 
    Although this is a stretch for this problem, but might search your uninstall directroy and see if there are any expired Adobe trials you have not uninstalled.  For whatever reason it can stop launch of Bridge "as you need to launch parent application at least once".  Apparently even though it is long gone it is still seeing it as "parent" program.  As I said it is kind of a stretch here, but you never know.
    Good luck on this as I know it is extrememly frustrating and Adobe does have its communication problems. 
    That is why it is important for the users to step up and start contributing to these forums with suggestions on what to try, thiings they have tried and worked or did not, etc. 

  • Tomcat (3.2.8) service will not start in Windows 2003 Server

    We just upgraded one of our servers to Windows 2003 Server. I did change the port in server.xml from 8080 to 8060. When I try to start the tomcat service it fails with an error message:
    Could not start the Tomcat service on Local Computer.
    Error 1067: The process terminated unexpectedly.
    I can however start it with the startup.bat file in tomcat_home\bin
    Can anyone help.. was running fine under windows 2000 server

    Corection Tomcat version is 3.2.4

  • ITunes 10 will not run on Windows 7, 64 bit

    I have upgraded to itunes 10 and now it will not run. In task manager the process is running but no programme. i uninstalled all itunes, quick step, bonjour and apple folders. Then tried a clean instal of itunes 10. Still didn't work. Uninstalled again and reloaded v 9.2 and it works. Tried disabling bonjour and ran the instal of 10 again and it still doesn't work. This is becoming a major pain as I am stuck on v9.2.

    Try installing the version 10 again so we can check on a few other characteristics of the problem, seeoh.
    (1) Does your QuickTime Player launch, or do you get an error message of some kind when you try to launch that?
    (2) Try (by way of experiment) disabling the BonJour Service.
    In your Start Menu, right-click Computer and select "Manage".
    Expand "Services & Applications".
    Open "Services". (Maximise the window to better see what's going on.)
    Right-click the BonJour Service and select "Properties". In the "General" tab, set Start-up type to "Disabled".
    Restart the PC, and try launching iTunes again. Does it launch this time?

Maybe you are looking for

  • (ASA 5510) How do assign multiple public IP addresses to outside interface?

    Hi, I'm currently replacing my ASA 5505 with a 5510. I have a range of public IP addresses, one has been assigned to the outside interface by the setup wizard (e.g. 123.123.123.124 ) and another I would like to NAT to an internal server (e.g 192.168.

  • Reader 9.3 Stopped Working

    Running Windows 7; Computer came with Adobe Reader 9.1 which would not work so I uninstalled it and downloaded & installed 9.3. When trying to open Reader 9.3, the same message appears: Adobe Reader has stopped working. Does anyone have a methodology

  • Steps for IDOC scenario

    Hi all, I am doing an File to IDOC scenario.I have done with all the mappings and configurations in IR and ID.Please can anyone let me know the configurations that are to be done in R/3 and SLD for the posting of IDOC. Please can anyone explain this

  • The instance name of em instance

    I tried to install the OCS R2(9.0.4.1) into a Suse SLE 8 (United linux 1.0). The kernel hostname=infraocs.synervision.cc, kernel.domainname=synervision.cc. After finished install, the instance name in the em become infra.128.1.0.150, instead of infra

  • What to teach for architecture, product and portrait imaging?

    Hi All, knowing how to work in photoshop is one thing, but passing knowledge on to others is another. I recently enrolled in a school for graphic arts, and totally unplanned I have to jump in for a colleague that is no longer available. I have to tea