FB Node: Initialize on First Call

Hi all,
Not sure why, but my Initialize on First Call option on some of my feedback nodes is disabled. Can you tell me why? Thanks!
Yik
Kudos and Accepted as Solution are welcome!
Solved!
Go to Solution.

The feedback node can only be globally initiallized unless you wire a value to the initialize terminal. When you wire the initial value the other options are enabled.
The help for this is a bit lacking but if you select the Feedback nodes properties page it is explained there
Message Edited by Jeff Bohrer on 03-16-2010 03:36 PM
Jeff

Similar Messages

Initializer block not called when static method called

public class Initializer {
     Initializer(){
          System.out.println("Constructor called");
               System.out.println("CLASS INITIALIZED");
     static void method(){
          System.out.println("Static method called");
     public static void main(String[] args) {
          Initializer.method();
From the JLS
A class or interface type T will be initialized immediately before the first occurrence of any one of the following:
T is a class and an instance of T is created.
T is a class and a static method declared by T is invoked.
[b]
But when i call the static method , if the class is initialized shouldnt the initializer block be called, it is not called, why.

Perhaps running something like this will add a little more colour?:
public class Initializer {
    static {
        System.out.println("First static initializer");
        System.out.println("First instance initializer");
    Initializer() {
        System.out.println("Constructor");
    static {
        System.out.println("Second static initializer");
        System.out.println("Second instance initializer");
    static void staticMethod() {
        System.out.println("staticMethod");
    void instanceMethod() {
        System.out.println("instanceMethod");
    public static void main(String[] args) {
        System.out.println("main");
        staticMethod();
        new Initializer().instanceMethod();
}

Initialization section vs call from another code block in package.

hi,
why is it intialization section in package body is more than call from another code block the package .

The initialization section is only called once upon the initial loading of the package into memory, which is just once per session. So, accessing any function or procedure etc in the package causing it to load into memory will automatically run the initialization section first. It doesn't have to be called specifically.

IPhone 4s call waiting; how do I get back to the first call?

When I'm on a call and a second call comes in I tap "hold current call and answer." I get connected to the second call and the first call is put on hold. But when I am done with the second call, how do I get back to the first call? I can't find any way to get back to the call that is on hold. I usually end up hanging up on both calls. Not good.
Also, how do I switch back and forth between two calls? How do I put the second call on hold, go back to the first call to tell that person I must call them back, then return to the second call?

http://support.apple.com/kb/TA38607?viewlocale=en_US
Good Luck

CoCreateInstance returns 0x8007007e (Module could not be found) for the first call only at system startup on Windows 2008 Enterprise SP2

Hi Guys,
I'm experiencing a problem with CoCreateInstance, where it returns error 0x8007007e.
The code is something like this:
HRESULT hRes = S_OK;
CComPtr<IMyInterface> spObj;
if(FAILED(CoInitialize(NULL))) { /* quit */ }while(FAILED(hRes = spObj.CoCreateInstance(CLDIS_MyClass, NULL, CLSCTX_LOCAL_SERVER)))
// LogFailure(hRes);
Sleep(10);
The problems occurs only on a single machine having Windows 2008 Enterprise SP2 installed (it works fine on other machines / OS versions). It happens only during the system startup (this is a Windows Service) and only for the first call of the CoCreateInstance.
The second call always succeeds.
The problem does not occurr when starting the service manually from Services.
I did some investigation using Process Monitor and found that the HKCR\CLSID\[CLSID of MyClass]\LocalServer32!LocalServer32 registry value is accessed before the failure. The registry value exists - it is added by the Windows Installer during
installation.
If I remove the registry value then the CoCreateInstance always succeeds.
I've been trying to lookup for some documentation on HKCR\CLSID\...\LocalServer32!LocalServer32 but haven't found anything useful other than it's a "Windows Installer Entrypoint". I assume that the Windows Installer does some integrity checks when
calling CoCreateInstance for such class and this fails for some reason but currently I fail to find the reason.
Can anyone help finding out what's the root cause of the 0x8007007e error here, please? Any help or tip is much appreciated.
Many thanks!
Marcin.

Hi Marcin,
This forum is mainly for talk about the product use related issue and not the best place to talk about the develop issue, for the develop issue we can post in MSDN forum for
the further help and your issue may need capture a dump then for the further analysis it is not an efficient way to work in this community since we may need more resources which is not appropriate to handle in the community. I‘d like to suggest that you submit
a service request to MS Professional tech support service so that a dedicated Support Professional can further assist with this request.
MSDN forum
https://social.msdn.microsoft.com/Forums/en-US/home
Please visit the below link to see the various paid support options that are available to better meet your needs.
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Thanks for your understanding and support.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

How to quickly pick up a 2nd call and drop the first call

If I am on a phone call, and then a second call comes in, then how can I quickly pick up the second call and DROP the first call? I can do it if I put the first call on hold but then I have two calls going. If I simply END the first call, then it takes 5 or 6 seconds for the second call to come in. Several times I have lost the second call because it took too long to transition over.

never mind i did a direct chat with a skype rep and got my answer which is no.

Verizon's iPhone 4S is dropping the first call almost all the time?

Hi.
I have a verizon iPhone 4S.
Everytime I make the first call to someone, I don't hear anything.
When I end that call and try calling again, it works.
This has been happening almost all the time.
I tried letting the phone app turned on but it doesn't solve the problem.
I'm not sure if other carrier's iPhones are having this problem.
Does anyone know what the problem is to this?
Thank you very much.

I tried letting the phone app turned on but it doesn't solve the problem.
What does that mean?
Try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.
If still a problem, restore.
If still a problem, take it in to Apple for a warranty replacement.
IMO, you'll probably end up taking it in to Apple but the other steps are worth trying.

Skype Windows client hangs for the first call - co...

Hi,
Skype on my Windows 8.1 (depending on its mood) hangs for the first call. It will keep ringing and ringing till it times out, during that time I am not able to hang up the call as well, the red hang up button doesnt work and we have to let the call go on till it drops on its own. Then on the second try it connects perfectly fine. This happens most of the times, there are only a few days where it connects on the first try otherwise its always the 2nd time.
Please let me know what could be the possible solution for this one?
Thanks

Hi Marcin,
This forum is mainly for talk about the product use related issue and not the best place to talk about the develop issue, for the develop issue we can post in MSDN forum for
the further help and your issue may need capture a dump then for the further analysis it is not an efficient way to work in this community since we may need more resources which is not appropriate to handle in the community. I‘d like to suggest that you submit
a service request to MS Professional tech support service so that a dedicated Support Professional can further assist with this request.
MSDN forum
https://social.msdn.microsoft.com/Forums/en-US/home
Please visit the below link to see the various paid support options that are available to better meet your needs.
http://support.microsoft.com/default.aspx?id=fh;en-us;offerprophone
Thanks for your understanding and support.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Cannot pick up calls on wait, Cannot make a second call holding the first call

I have a really weird problem with my iPhone 5S. (iOS 7.1)
1. When I am on a call, I am not able to pick up a second call that is on wait. I can see the second call, I can hear the beep sounds but as soon as I pick up, the call freezes in 00.00 time, and My first caller is still active, not on hold.
2. When I am on a call, I am not able to make a second call placing the first call on hold. The second call disconnects immediately with 3 beeps.
3. I am able to see the incoming calls on wait, when I am already on a call. I am able to hear the beeps coming in. SO it means the call waiting is on (Tried turning it on/off/on too.) But when I pick up the call, the above problem comes in.
What have I tried to solve this: (None of them helped)
1. I tried a hard reset of my iPhone (Holding Power and Home button)
2. I tried toggling the Call waiting button
3. I tried resetting network settings.
4. I called my Operator for assistance. I am using Airtel, India. They told me to dial this code - *43# . I tried it and it gave me this screen. But the problem is not solved yet.
Is there anybody here who is facing the same issue with your iPhone? I never had this problem with my iPhone 4.

Make sure you do not have "Do Not Disturb" turned on. This feature will block the first call, but is someone calls right back it will be put through.
On the iPhone, go to Settings/Do Not Disturb
Make sure you do not have Do Not Disturb turned on manual or scheduled.

CME - Second Call Drop the first call

Greetings,
Anyone ever seen something like this?
I get a call on my extension, and when I receive a call on another phone, the first call (in my Phone) drops.

I'm seeing this also with IPC softphone version 8.6.
Has anyone resolved this issue?

When receiving an call waiting can't push the hold and answer button.Because: it will put on hold the first caller, answer to the second, but you can't hear the second until you end the first call !!! Anyone has the same problem ? Did anyone know why ?

When receiving an call waiting can't push the hold and answer button.Because: it will put on hold the first caller, answer to the second, but you can't hear the second until you end the first call !!! Anyone has the same problem ? Did anyone know why ?

Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

The ATA only rings the first call

HelloI've just had instaled an ATA Linksys SPA2102 conecting it to a DSL modem CTC UNION model ATU-R130. The SIP is INPHONEX.COM
My ISP had to redirect some ports to a fixed IP address in order to make the ATA RING.
I make a call to the number assigned to the ATA and it rings ok the first call (many rings but only the first call).
After that I make as many calls as I can, but the ATA doesn't detect that a call is going on. Then I must reset the ata with the factory default values and re-enter all the SIP information in order to get the ATA ringing again.The ATA works fine making calls. The problem is receiving them.Does somebody know what's wrong?
Thanks
Juan

On your next attempt on calling the ATA , try checking the Info page under the Voice tab then look for Hook State, you may want to check first if the ATA disconnected the last call properly. Try checking also if you're using the latest firmware on the unit.

First call attempt fails with 12000; reason="Routes available for this request but no available gateway at this point"

We've installed a new Audiocodes Mediant 1000B gateway for our customer. They only have about 6 users enabled for Enterprise voice and using Lync for all calls. They have an intermittent problem whereby the first call attempt to a number on the
PSTN fails with 12000; reason="Routes available for this request but no available gateway at this point". There is only one PSTN gateway installed. All routes point to this gateway. What I found initially is that the calls
were failing after 10 seconds which is the default "failovertimeout" in the OutboundRouting.exe.config. I found this post http://voipnorm.blogspot.co.uk/2012/06/lync-2010-gateway-timeout-call-failures.html and
changed the value to 20 seconds. Subsequent failures failed after 20 seconds (the new value). The interesting thing is that the second attempt even a couple of seconds later succeeds. My Lync server event log has 46046 "A call to a PSTN
number failed due to non availability of gateways." for the failed call and 46047 "A PBX gateway is now responding to requests after some failures." for the successful call moments later.
My environment is Lync 2010. A single enterprise edition Front End with collocated mediation. The server is virtual and in a different physical location to the gateway. The two sites are connected via a LES1000. The RTT between the
sites is very low so it isn't necessarily networking.
In the Syslog output on the Audiocodes we don't see the call even reach the gateway. It's likely that Lync has simply marked the gateway as down and doesn't route the first call. Then it wakes up and marks it as up and routes the next call.
Update wise I'm on 4.0.7577.183, 199 and 217 for those that are up to date and the only components that are behind say that 223 is available. Those being Core Components, Lync Server, Conferencing Server and Web Components.
As I said, this is intermittent, apparently doesn't happen for every user (which I don't buy), but is easily replicated on request.
I definitely think changing the failovertimeout value has reduced the number of failures. But realistically I don't want users sitting there for 20 seconds before their call fails. Or 19 seconds for the call to route.
I've found a few posts on this and similar issues. I don't get the 25051 or 25052 errors.
Any help gratefully appreciated.
Regards
Randy Chapman
Best Regards Randy Chapman

Try to change the value of Failovertimeout to 1000.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

My Skype crashes whenever I make the first call/re...

My Skipe crashes whenever I make the first call or receive the first call. Whether it be by skype to phone or from skype to skype.
I have to sign out from skype and then sign in again for every call I want to make.
Solved!
Go to Solution.
Attachments:
DxDiag.zip ‏15 KB

Please, run the DirectX diagnostics tool.
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

First call is always true

I want to set the value of a numeric slider every time a sertain mode is set. I would suspect the "first call' would be the obvius solution. But for some reson it is always
'true"
Is there a nother good way of solving this problem, or am I doing somthing wrong?
/REO
Attachments:
Rhino interface.vi ‏290 KB

Hai,
The first call function will always return TRUE in your case the reason is as follows: When a VI runs for the first time this fuction returns TRUE and this VI should remain in memory (in execution mode) so that when it is called the next time it will give FALSE. But the vi does not stay in memory i.e. when you press run button it executes and unloads from memory when execution completes.
One Workaround is keep the VI in memory or put a while loop with unintialized shift register and should run only once! Look at the VI that i have attached.
Hope this helps.
With regards,
JK
(Certified LabVIEW Developer)
Give Kudos for Good Answers, and Mark it a solution if your problem is solved.
Attachments:
Rhino interface1.vi ‏129 KB

FB Node: Initialize on First Call

Similar Messages

Maybe you are looking for