FB01: "Posting with ref." slould I modify the field 'Assignment' by hand?

Hi All,
I'd like to post a document by t.code FB01 and using the function "post with reference".
When i save the new document, it takes the field 'Assignment' from the reference-document i've put in.
Should I modify it by hand before saving it?
Or ther's the way to obtain it in the right way automatically?
Thanks
Gandalf

Hi,
You need to change the required fields manually, before actually posting a document with a reference document.
More over, its better to simulate a document before saving(posting).
Regards,
Praisty

Similar Messages

Control GR Qty while posting with ref. to Inbound delivery

Hi,
We have an inbound delivery process where Inbound delivery is made against the PO and subsequently GR is made against the inbound delivery.
While posting GR via MB0A with ref. to inbound delivery, the qty can be modified at GR Stage. We want to ensure that GR Qty is always equal to Inbound Deliery Quantity.
Is there any customisation available?? Or it can only be controlled using User Exit only.
Kindly suggest.
Regards
C.A. Shankar

Hi Shankar,
For this you have to go for seperate Doc. type for Inbound based GR.
In the document type you can control the field as display maode in Qty field. this will not possible to change.
SAM

Problem to modify the field "location" in an AP on WCS

Hello everybody,
I have a problem to modify the field "location" in an access point on WCS.
In fact, when i try to modify this field and then apply the modification, i have this error message :
"Error(s): You must correct the following error(s) before proceeding:
Error:Global Username and Password are not configured on the associated controller. Please configure username and password on the associated controller before disabling 'Override Global Username Password'."
I made the modification on Chrome and Firefox but I always have the error message.
Nevertheless, i don't have this error message with other access points and other access points are configured without the option "Override Global Username Password".
I'm obliged to make the modification directly in the controller and not in WCS.
The problem is that i want to make the modification directly in WCS.
Could you help me please ?
Thank you in advance.

When i make the modification directly in WCS, i have no problem, it syncs good.
The version of WCS is 7.0.230.0.
The version of the controller is 7.0.240.0 and the field recovery image version is 7.0.112.21.
Version
7.0.230.0
Version
7.0.230.0
Version
7.0.230.0

Modify the field TXJCD_ST of RFC_CALCULATE_TAXES_DOC

HI,
I have a requirements to modify the field TXJCD_ST of RFC_CALCULATE_TAXES_DOC with the ShipTo jurisdiction code.
What i found is the user exit exit_saplfytx_user_001 that sends to the RFC a list of fields that are modified. The field TXJCD_ST is not in the list of the user exit.
At this point i don't know how to do it , meaning pass the modified value of the TXJCD_ST to the RFC_CALCULATE_TAXES_DOC.
Does anyone know how to?
Regards, Oli

No, I did not see this particular scenario yet. If the Taxware guys say they can not configure their side like that, then this won't work. I just thought they could be able to do this because they can configure the structure of the USER_DATA field on their end. It is entirely possible that those fields that are explicitely part of the interface can not be added to USER_DATA.
You can still try my first suggestion
I wonder if that'll work. Theoretically it should since by looking at the related code and backtracking the calls, it looks like MOVE-CORRESPONDING statements are used - so having the TXJCD_ST as part of the allowed fields might just work OK.

Modify the field u00AB Account u00BB in FB03 Transaction (ECC6)

Hello,
I have to modify the value of the field u201CAccountu201D in the general screen and in the item screen of the transaction FB03. (to put inside the alternative account)
I have tested all the user exit of the transaction but none is useful.
Then, u201CI_AUTHORITY_ITEMu201D is the only one BADI for the transaction, but it occurs too early in the program to change data.
Ie, with it I can change the field in the intern table (SAPLF064)XBSEG but this field is replaced with another value later in the process. And I canu2019t change this other value because of checks on it in the program.
Have you got any suggestion before I run the specific solution of the ZFB03 ?
Regards.

Alfred
Check BADI "ACC_DOCUMENT", it is filter dependent, so set the appropriate filter once you create the Implementation...
Thanks
Amol Lohade

What are the security settings to lock down a form with fillable fields and yet allow someone with Reader to fill in the fields as will as save the form and print it?

What are the security settings to lock down a form with fillable fields and yet allow someone with Reader to fill in the fields as will as save the form and print it?

You want to allow someone to open your document and fill out the form (in the fields you have created), but not change or edit the form, right? Here's the answer - assuming you are using Acrobat Pro and someone will be opening the PDF using at least Acrobat Reader 9 and up:
Tools > Protection > Encrypt < Encrypt with Password
Answer YES to change the security.
A new window opens:
     Do NOT select Document Open (or that will require a password to open the document.)
     Select: Permissions (Check the box next to "Restrict editing and printing of the document.")
     Change the following 2 settings from the drop-down box:
          Printing Allowed: Select High Resolution
          Changes Allowed: Select Commenting, filling in form fields, and signing signature fields
          Leave selected: "Enable text access for screen reader devices for the visually impaired"
          Change Permissions Password (insert a strong password)
          Leave all other settings alone in "Options"
          OK - OK
          Re-enter the Permissions Password (the one you entered above)
          OK - OK
          Save the PDF to apply the security [notice that (SECURED0 will appear after the document title]

Modify the Field Type of standard Table fields in a Query

Hello. I have a question.
Is there a way to "modify" the field type for standard table fields that are included in a Query?
I made a simple query out of a join of tables, but several fields have a lot of decimals, and I would like to present them in the query without any decimals, just as a regular "N" field.
I tried the possibility of creating extra local fields where all I do is transfer the value to the new "N" field, but I have many fields like this, so if there's a better way; I'd prefer that.
Maybe somewhere in the InfoSet there's a way to modify the type of the standard table fields?
Thank you.

Hi,
This document may help you out.
[http://help.sap.com/saphelp_erp60_sp/helpdata/en/d2/cb4468455611d189710000e8322d00/frameset.htm|http://help.sap.com/saphelp_erp60_sp/helpdata/en/d2/cb4468455611d189710000e8322d00/frameset.htm]
Cheers,

Problem with a method to modify the transparency of a Label UILabel

HI
I Have create a small project which can modify the brightness ( or the transparency ) of a label
UIlabel
So the code
File .m
ControlBoxCookeAppDelegate.m
Code :
Code:
*// ControlBoxCookeAppDelegate.m*
*// Control Box Cooke*
*// Created by Bruno on 1/11/10.*
*// Copyright _MyCompanyName_ 2010. All rights reserved.*
*#import "SerialManager.h"*
*#import "ControlBoxCookeAppDelegate.h"*
*#import "PickerViewController.h"*
*#include <fcntl.h>*
*#include "Led.h"*
*@implementation ControlBoxCookeAppDelegate*
*@synthesize window;*
*- (void)applicationDidFinishLaunching:(UIApplication *)application {*
*// Override point for customization after application launch*
*[window makeKeyAndVisible];*
//RootViewController.m
*- (void)applicationDidFinishLaunching:(UIApplication *)application {*
* pvController = [[PickerViewController alloc] initWithNibName:@"pickerview"/@"MainWindow"*//@"Control Box Cooke"//*@"PickerView"/ bundle:[NSBundle mainBundle]];*
* Led_Operateur= [[Led alloc] initWithFrame:CGRectMake(20,50,280,20)];*
* Led_Operateur.text=@" ";*
* [Led_Operateur setBackgroundColor: [ UIColor colorWithWhite:1.0 alpha: 0.5]];*
* [pvController.view addSubview:Led_Operateur];*
* [window addSubview:pvController.view];*
* // Override point for customization after application launch*
* [window makeKeyAndVisible];*
*- (void)dealloc {*
* [Led_Operateur release];*
* [pvController release];*
*[window release];*
*[super dealloc];*
-(void)Modifie_luma:(CGFloat)luma
* pvController = [[PickerViewController alloc] initWithNibName:@"pickerview" bundle:[NSBundle mainBundle]];*
* Led_Operateur= [[UILabel alloc] initWithFrame:CGRectMake(20,50,280,20)];*
* Led_Operateur.text=@" ";*
* [Led_Operateur setBackgroundColor: [ UIColor colorWithWhite:1.0 alpha: luma]];*
* [pvController.view addSubview:Led_Operateur];*
* [window addSubview:pvController.view];*
* [window makeKeyAndVisible];*
@end
file.h
Code :
Code:
*// ControlBoxCookeAppDelegate.h*
*// Control Box Cooke*
*// Created by Bruno on 1/11/10.*
*// Copyright _MyCompanyName_ 2010. All rights reserved.*
*#import <UIKit/UIKit.h>*
*#import "SerialManager.h"*
*#import "led.h"*
*@class PickerViewController;*
*@interface ControlBoxCookeAppDelegate : NSObject <UIApplicationDelegate> {*
*UIWindow window;
* PickerViewController pvController;
* SerialManager portCunima;
* int portin,portout; // numero de port de com in-out*
* UILabel Led_Operateur;
-(void)Modifie_luma:(CGFloat)luma;
*@property (nonatomic, retain) IBOutlet UIWindow window;
@end
To the initialization no problem my label UILabel display itself very well with the transparency
of 50% ( alpha=0.5)
But when I modify this transparency with a button, in my window iPhone
the program call the method Modifie_Luma witch is the class
ControlBoxCookeAppDelegate
the program go on to this method, (I have fixe a breakpoint) but impossible to various this transparency.
So if I change in method (void)applicationDidFinishLaunching
the transparency
example alpha =0,5 => alpha =0,8
Code :
Code:
* [Led_Operateur setBackgroundColor: [ UIColor colorWithWhite:1.0 alpha: 0.8]];*
this example go on
resume
when I change the transparency in the method
(void)applicationDidFinishLaunching it 's OK
when I change the transparency in the method
-(void)Modifie_luma it's not OK
Have you an explanation ?

So the code , sorry but no marker for the code in post
How do you do ?
// ControlBoxCookeAppDelegate.h
// Control Box Cooke
// Created by Bruno on 1/11/10.
// Copyright _MyCompanyName_ 2010. All rights reserved.
#import <UIKit/UIKit.h>
#import "SerialManager.h"
#import "led.h"
@class PickerViewController;
@interface ControlBoxCookeAppDelegate : NSObject <UIApplicationDelegate> {
UIWindow *window;
PickerViewController *pvController;
SerialManager *portCunima;
int portin,portout; // numero de port de com in-out
UILabel *Led_Operateur;
-(void)Modifie_luma:(CGFloat)luma;
@property (nonatomic, retain) IBOutlet UIWindow *window;
@end
// ControlBoxCookeAppDelegate.m
// Control Box Cooke
// Created by Bruno on 1/11/10.
// Copyright _MyCompanyName_ 2010. All rights reserved.
#import "SerialManager.h"
#import "ControlBoxCookeAppDelegate.h"
#import "PickerViewController.h"
#include <fcntl.h>
#include "Led.h"
@implementation ControlBoxCookeAppDelegate
@synthesize window;
- (void)applicationDidFinishLaunching:(UIApplication *)application {
// Override point for customization after application launch
[window makeKeyAndVisible];
//RootViewController.m
- (void)applicationDidFinishLaunching:(UIApplication *)application {
pvController = [[PickerViewController alloc] initWithNibName:@"pickerview"/@"MainWindow"*//@"Control Box Cooke"//*@"PickerView"/ bundle:[NSBundle mainBundle]];
Led_Operateur= [[Led alloc] initWithFrame:CGRectMake(20,50,280,20)];
Led_Operateur.text=@" ";
[Led_Operateur setBackgroundColor: [ UIColor colorWithWhite:1.0 alpha: 0.5]];
[pvController.view addSubview:Led_Operateur];
[window addSubview:pvController.view];
Led *ZoneA;
CGRect Dimension;
ZoneA = [[Led alloc]initWithFrame:Dimension];
[pvController.view addSubview:ZoneA];
[window addSubview:pvController.view];
[ZoneA Modifie_luma:0.5];
[ZoneA release];
// Override point for customization after application launch
[window makeKeyAndVisible];
Led *Led1;
CGRect frame;
Led1=[[Led alloc] initWithFrame:frame];
[pvController.view addSubview:Led1];
[window addSubview:pvController.view];
[Led1 release];
[label release];
[Error_message release];
[path_port release];
- (void)dealloc {
[Led_Operateur release];
[pvController release];
[window release];
[super dealloc];
-(void)Modifie_luma:(CGFloat)luma
pvController = [[PickerViewController alloc] initWithNibName:@"pickerview" bundle:[NSBundle mainBundle]];
Led_Operateur= [[UILabel alloc] initWithFrame:CGRectMake(20,50,280,20)];
Led_Operateur.text=@" ";
[Led_Operateur setBackgroundColor: [ UIColor colorWithWhite:1.0 alpha: luma]];
[pvController.view addSubview:Led_Operateur];
[window addSubview:pvController.view];
[window makeKeyAndVisible];
@end

PROBLEM IN TRANSFER POSTING WITH REF. TO RESERVATION

Dear cons
I have been facing a problem in t- code- MB1B. I have configured for p.o field in mb1b . in screen layout of transfer posting I have done.because we want a p.o no. field in MB1B.So we generally transfer the material with reference to reservation. so we created a reservation with t-code- mb21 with movement type-415. after that we want to transfer with reference to reservation. but the system gives an error message that
CHECK TABLE XMRES : ENTRY 0000000000 0001DOESNOT EXIST.
MESSAGE NO. M7001
DIAGONISIS ; IN TABLE XMRES THE ENTRY 0000000000 0001 IS MISSING
PL. LOOK INTO THIS MATTER.
THANKS
NRK

Hi,
How you are configured the new PO field.
in OMJJ, the system given the what are the possible options, otherwise its very diffcult to configure.
So check at :OMJJ
regards

Problem with lower third template & modifying the text...

I'm doing a top 10 type video, & I downloaded this lower third template & I had never used AE before; I figured out how to duplicate it multiple times through the video where appropriate... but when I modify the text on one template it does the same thing to all of them. How do I make them all separate?

Ok, think about what you have done to change the text for moment. You drilled down to a pre-comp or nested comp that contains a text layer. This makes perfect sense. Unfortunately that text pre-comp is also nested in a pre-comp. This means you need to find each of these pre-comps in your project panel and duplicate them there, open the duplicates and then change the text in the duplicates, then replace the original nested comps in the main comp.
I have another observation on your workflow. You've put a bunch of shots and transitions in a single comp which, in effect, tells me that you are using AE as a NLE (editing app). What I would have done is to put every one of your shots that you want to add titles to in a separate comp to simplify each comp. I'd then edit them in a NLE....
The other way I would do this project is to make a comp that is just the needed titles, one comp for each tltle overlay, render the titles with alpha channels, then bring the titles and the original footage into a NLE to edit and add titles.
Building extremely complex compositions with multiple shots in a single comp is usually not a very good idea, even for folks like me that have been doing AE for 20 years. AE is perfect at making shots, lousy at editing sequences so always, and I mean always, try to figure out how you can simplify your project to it's basic elements and build a comp on that. I've had 5 second animations with over a hundred layers, but I've never put 10 or 20 video clips in AE in a single comp and tried to create a sequence.

How to modify the field lengh of file upload

Hi All,
   I am facing a problem with u201Cuploadu201D filed length in BSP application.
When we upload the file in BSP page, the path displayed should be the full path (i.e. from where the file is being upload the file)
Now this field is appearing 20 char length
Now I want to increase the length of the upload field (Input field) to be 100 char so that the path is visible.
In the current application the file upload is being done through a structure (attributes)
In this structure the fields are like this
PAGE_NAME
ID
FOR
TAGS
ROW_INDEX
COLUMN_INDEX
OTR_NAME
REQUIRED_NAME
MAXLENGTH
SIZE
TABLE_NAME
ON_SELECT
VALUE
DISABLED
ONCLICK
TEXT
TYPE
Using this method:
CALL METHOD cl_htmlb_fileupload=>factory
          EXPORTING
            Id      = ls_form_save-id
          RECEIVING
            Element = lv_fileup.
        bee_table->add ( level = 2 element = lv_fileup ).
This cl_htmlb_fileupload is named as class interface.
Which has the CLG_HTMLB_FILEUPLOAD (it is a class) it is defined in attributes.
In this class it has the attribute u201CSIZEu201D by default string 20.
Now I need to change this attribute length from 20 to 100
For this I copied the standard class CL_HTMLB_FILEUPLOAD into ZCL_HTMLB_FILEUPLOAD.
This ZCL_HTMLB_FILEUPLOAD contains all attributes of the standard class CL_HTMLB_FILEUPLOAD
Including the one class (CLG_HTMLB_FILEUPLOAD), this is defined as an attribute (ABOVE MENTIONED?)
This class is appearing in non editable mode, so   I have copied this class into zclass (ZCLG_HTMLB_FILEUPLOAD).but still I am not able to edit the attribute called u201Csizeu201D
And also I am not bale to add the zclass in place of the ZCLG_HTMLB_FILEUPLOAD
Kindly tell me how to modify the length of the field u201Csize u201Cand also how to add the zclass in the attributes of one class (syntax)
Thanks in advance
Rambabu.A

Hi,
Class CLG_HTMLB_FILEUPLOAD is a class automatically generated when a BSP Element is created. You should not change/create such a class, unless by creating your own BSP Element.
As per your requirement, you can use the SIZE parameter of method factory:
ls_form_save-size = '100'.
CALL METHOD cl_htmlb_fileupload=>factory
EXPORTING
Id = ls_form_save-id
Size = ls_form_save-size
RECEIVING
Element = lv_fileup.
Regards,
Tanguy

Modify the field value in itab1 using itab2

Hi experts
I need some help.
My question is : I have ITAB1 contains IBLNO field it is a legacy value.
I want to modify this field.
Another internal table ITAB2 contains sap, legacy value of IBLNO(Cross refrenced table).my requirement is IBLNO of ITAB1 is modified with corresponding sap IBLNO in ITAB2.
plz help
Durga Parsad

Hi Durga,
You want to get following results -
1. You have ITAB1 containing IBLNO.
2. ITAB2 has IBLNO.
3. Modify ITAB1-IBLNO from ITAB2-IBLNO.
4. There must be some common value between the two tables. It has to be there otherwise the two records won't match.
Kindly find the following code for doing so -
LOOP AT ITAB2 INTO WA_ITAB2.
* Modify ITAB1 from workarea of ITAB2 for matching records
MODIFY ITAB1 FROM WA_ITAB2
    TRANSPORTING IBLNO                " Modify only IBLNO of ITAB1 for matching records
    WHERE FIELD1 = WA_ITAB2-FIELD1.   " Some common field between the ITAB1 & workarea of ITAB2
CLEAR WA_ITAB2.
ENDLOOP.
Hope this helps.
PS If the answer solves your query, plz close the thread by rewarding each reply and marking it Solved.
Regards

I would like to be able to start typing a URL directly (with no need to clear the field first) after opening a new tab with my homepage...

I've just installed the newest desktop version of the Firefox browser because my Opera doesn't feel very well these days. I'm trying to become friends with Firefox, and that's why I've changed the new tab settings in order to have my offline homepage loaded every time I open a new tab. There is an inconvenience — when I press Ctrl+T, the cursor appears at the end of the URL. It means that when I start typing, the letters show in the address bar after the URL of my homepage, so what I need is to clear the field first.
Is there a way to get rid of this? (If it helpes, I'm currently using Windows 7.)
I would appreciate if I could just press Ctrl+T, type a URL, and press Enter when I want to go to a website different from my homepage. Thank you for your replies!

Then you can use (Ctrl+L and) Ctrl+A to select all the text in the location bar or Shift+Home/End.

How to modify the field symbol

Hello Every1,
I have a internal table and field symbol with the below structure.
Data : begin of itab occurs 0,
           matnr like mara-matnr,
           ersda like mara-ersda,
       End   of itab.
FIELD-SYMBOLS: <Matnr>    TYPE STANDARD TABLE.
I have the field symbol with 10 records similar to the structure of itab. (Only matnr is populated and date as initial). Now I need to transfer the date value from itab to the field symbol for the matching matnr.
Please let me know how to do it.
Thanks,
Siva.

Sivaprakash,
To my knowledge, a field-symbol cannot hold values on its own. It refers to a field or a table and work directly with the values.
Your scenario cannot be achieved unless there is another internal table besides itab.
Create a field-symbol of type itab2 and compare matnr with itab-matnr.
If a record is found then move the date field to <fs>.
Your code may look like this.
loop at itab2 assigning <fs>.
   read table itab into wa_itab with key matnr = <fs>-matnr.
if sy-subrc = 0.
<fs>-date = wa_itab-date.
endif.
endloop
Thanks,

I can't modify the field MARC-LOSGR using the badi BADI_MATERIAL_REF

Hello!
I have to force a value in the field "lot size" (MARC-LOSGR) when the system extends automatically a material with the transaction CK40N.
I tried to use the badi BADI_MATERIAL_REF, wich seems to be perfect for this purpose, but it doesn't work: after the badi the system resets the field to its initial value.
What can I do?
Thank you

Dear Sauro
I've found this thread in the forum, and because I've the same problem (I need to set 1000 as default for marc-losgr) during creation/extension of a material, I'd like know how you solved your issue.
The BADI is called during CK11N and CK40N transaction, but even if I set the value in the right mode it's not saved on table MARC. Of course If I create manually the cost view by using MM01 the BADI works fine and the value is saved.
Thank-you in advance for cooperation.
Claudio
Ps: se vuoi puoi anche rispondere direttamente in italiano al mio indirizzo che trovi nei miei riferimenti. Grazie

FB01: "Posting with ref." slould I modify the field 'Assignment' by hand?

Similar Messages

Maybe you are looking for