FB4.6 and Etension Builder 2.1

Hello,
We were using a demo version of EB2.1, which we have now purchased. We are now getting the following error.
'compiler.external-library-path' value contains unknown token 'CSLIBS'
We have uninstalled FB, removed folders, re-installed, all resulting in the same error.
We are on Mac 10.7.5, targeting InDesign 5.5, 6 and CC.
Any help with this would be most appreciated.
P.

Hi
The use of the latest java is machine directed. Here's what Apple says:
"This release does not change the default version of Java. This release is only for Mac OS X 10.5.2 and later, and should not be installed on earlier versions of Mac OS X. This release is for 64-bit, Intel-based Macs only and cannot run on PowerPC-based or 32-bit Intel-based Macs."

Similar Messages

  • Multi-module Maven and Flash Builder 4

    Sorry for cross-posting this, but I responded to:
    http://forums.adobe.com/message/3235768#3235768
    which was posted in the Flex forum, and this is more about Flash Builder. The issue is that content assist doesn't work with a multi-module maven project containing a Flex Project module. So here is my response to the above. Hopefully someone will see it here:
    <quote>
    I'm having the EXACT same problem reported by you as well as here:
    http://forums.adobe.com/message/2580402#2580402
    Steps to reproduce:
    1) Install Adobe Flash Builder 4 Standalone (I initially tried with Spring Toolsuite 2.5.0, but thought I should try with the standalone version from Adobe).
    2) Open FB4 and create a brand new workspace
    2) Add Eclipse Galileo and M2Eclipse as update sites
    3) Install m2eclipse
    4) From the command line, create a basic maven project via 'mvn archetype:create'.
    5) Remove the src folder and change packaging type to pom
    6) In FB4, import the new maven project
    7) Create a new Flex Project via File -> New -> Flex Project. Change the location so that it's in a folder under your newly created maven project
    8) Open Main.mxml -- notice that the generated file has syntax errors in it (another issue). Fix those errors and attempt the Content Assist -- no dice
    Notice that this is a vanilla FB4 standalone install. The only thing I added was the M2Eclipse plugin. Also, I am NOT using flexmojos, nor have I added a <modules/> section to the parent pom yet. As far as FB is concerned, the new flex project is just in a folder underneath another in it's workspace. Also note that this is a brand new workspace -- so a corrupted workspace shouldn't be an issue (as was apparent in the beta).
    This has been driving me nuts. We need this functionality. We have a multimodule maven project and really want to use Flex and Flash Builder. We're still in the eval period for FB, but may have to forgo buying FB and instead go with FlashDevelop, even though it's not as powerful.
    Justin
    </quote>

    Hi guy,
    its actually quite simple.
    The  "Root Folder"  "Root URL" "Context Root" define your server directory and its url.
    as the root folder you put in
    <your blazeds install dir>/tomcat/webapps/<your project dir> // you take the blazeds.war file and copy it , rename it and voila your app dir is ready
    so it should read something like : c:\blazeds\tomcat\webapps\my_project --> this then has a WEB-INF/flex directory in it. Thats why you have that error of yours  --> Invalid root. The WEB-INF/flex folder must contain either flex-config.xml or services-config.xml.
    the root url is something like
    http://localhost:8400/<your context root> --> is usually your project name in lower case
    the context root is your project name, the same name as your copied blazeds.war file
    <my_project_name> --> thats what you insert to access your app in a webbrowser
    Hope that helped a bit
    I am just getting started myself, so i hope i didnt make any mistake, if so I would also be happy if anybody you knows better corrects me    
    Have fun and good luck
    einrocker

  • Testing the water on possible Flash Professional and Flash Builder integration

    Hey,
    I just wanted to throw this out here instead of the bug area to see if I'm off my rocker or I'm on to something.
    Basically one of my major pains is that any application design I do, I do it in Flash Pro and I code in FB. Switching back and forth between apps just to press CTRL + ENTER seems like a) a waste of time and b) a waste of system resources.
    So what I'm proposing is having FB integrate with FLA files.
    When you create your product you have the option to specify a target FLA (or multiple with a build order) so that when you test your project it will actually build your FLAs in order (in the situation that the final SWF requires others) and you're off to the races.
    You could also have the currently associated FLA files have a checkbox next to them which could temporally disable them for a build.
    If you still need to make design tweaks later on, it's a mater of opening Flash and doing them, but it would be so slick to be able to have FB render the FLA for you in the same app (no more random CTRL+ENTER in FB anymore!)
    As far as where it could go. I think it would work the best if it was just a new tab that could be added to the perspective. Would allow drag+drop of FLA files to it, drag+drop ordering and also have the checkboxes to disable any FLAs from the build.
    So there we go, does that sound like a decent workflow?
    Cheers!

    Hi guys,
    Have you considered Testing the water on doing your design work in the new Flash Catalyst software http://labs.adobe.com/technologies/flashcatalyst/ for your skins instead of Flash CS4.
    You would be able to export directly in the new FXG format and integrate it directly in your FB4 coding.
    There is a tremendous productivity potential gain there.
    I am planning to abandon eventually completely Flash CS4 for both design  and coding and substitute it eventually by simultaneously working in FB4(coding) and Flash Catalyst(design) with input symbols directly linked to photoshop and illustrator related files.
    For those of you who would like to wet their toes  and initiate  a quick dive, Lynda.com has already released, on june 11,  an 1h40 min course on this subject. Here are the details.
    Length: 1 hour
    Online Training Library® exclusive!
    Flash Catalyst Beta Preview
    with: Mordy Golding
    Flash Catalyst is a new Adobe application that is currently in beta and available for downloading atlabs.adobe.com, that allows designers to quickly create interactive Flash content and rich internet applications without having to write a single line of code. In Flash Catalyst Beta Preview, Mordy Golding demonstrates a workflow that emphasizes the intuitive nature of the tool, and shows how to achieve results in a short time. Meant to bridge the gap between designers and developers, Flash Catalyst allows the designer to work with familiar applications, such as Photoshop and Illustrator, while automatically generating the necessary code in the background for the developer. Exercise files accompany the course.
    Topics include:
    Creating interactive content from Photoshop and Illustrator design compositions
    Turning ordinary graphics into functional components like buttons and sliders
    Using smooth transitions and animation techniques
    Moving content between Flash Catalyst and Flash Builder
    Declarative Graphics
    Flex 4 will make good use of FXG, the new graphics interchange format used with the CS4 graphics applications. Flex 4 and Flash Player 10 can together render FXG graphical elements. These include:
    graphics and text primitives
    fills, strokes, gradients, and bitmaps
    support for filters, masks, alphas, and blend modes.
    FXG graphical elements can be used in Flex 4 in a number of ways. FXG elements can be used within an MXML file or component and can also be saved as an .fxg file format. The CS4 tools will typically export an FXG using the FXG 2008 namespace. Because these files are designed to be shared between graphical applications, you’ll find that they have a stricter format to what’s used in Flex; the Flex compiler will only use the FXG-specific tags. Adobe’s new application, Flash Catalyst, will make it easy to create FXG graphics compatible with Flex 4, which you can then use to complete your application’s user interface and appearance.
    New effects have been added to Flex 4 that can also be applied to FXG graphical elements. These new effects will work on both new and old components alike. Standalone effects must now be declared within fx:Declarationstags instead of the body of the application. Once again, Flash Catalyst has additional tools to help make using these effects easier.
    Ref:http://www.sitepoint.com/article/whats-new-flex-4/ by Andrew Muller

  • Need help understanding MS SQL Server 2008R2 and Report Builder 3.0 and user access / priviledges.

    Having Problems with connections and access.  I have spent the last 2 days reading various threads regarding SQL Reporting Services pertaining to access and connections.
    First, let me explain what I have done to date.
    1)  I am using Windows 7 - Home Premium.
    2)  I downloaded and installed MS SQL Server 2008 R2 Express.  This was successful.
    3)  I downloaded Report Server 3.0 - This was successful.
    4)  In IE, I tried logging onto http://servername/reports, but this failed.  After logging into IE
    via ' Run Administrator', I was able to access URL.  
           Next, I updated the security / trust sites as explained in the
    threads
    Next, I went to Folder Setting and added my user name and granted all roles (Browser,
    Content Manager, My
    Reports, Publisher and Report Builder).
    5)  Now, I can log into Http://servername/reports using my normal windows 7 user account.
    6)  Next, I opened Report Builder 3.0.  However, I am having trouble connecting to report  
    server.  I tried connecting with
    http://servername/reports, but this failed. 
           However, If I change URL to http://servername/reportserver, it works.  BUT NOW, I have
    another problem.  When I
    execute the RUN button to create report, I get a  permission
    error.  "PERMISSION GRANTED TO USER ARE
    INSUFFICIENT FOR  PERFORMING THIS OPERATION".
    7)  Finally, I can not save reports to http://servername/reportserver when I select "Recent
    Site and Servers".  ERROR
    MESSAGE:  UNABLE TO OPEN OR SAVE REPORT
    8)  In my Reporting Services Configuration Manager:
    Web URL = http://servername:80/ReportServer
    Report Manager URL = http://servername:80/reports.
                What is strange, the Report Manager URL works for IE URL and WEB URL works for
    Report Builder connect (Even though it really does not work). 
    THREE QUESTIONS:
    1)  What URL should I use to connect in Report Builder.  
    2)  How do I update my normal Windows 7 user so I can run reports when I connect to report
    builder.        
    3)  How can I save my reports so they are displayed in IE Reporting services.  Note:  I was
    able to save report to
    documents folder and import into IE Reporting Services.
    4)  And finally, is it possible to add report builder 3.0 as a tab in my IE Reporting Services.  I
    save seen samples of Reporting Services screens where the instructor has Report Builder
    tab.
    Thanks
    Dan

    To answer question 1... it should connect through /ReportServer
    http://bretstateham.com/reporting-services-architecture-diagram%E2%80%A6/
    Report Builder 3.0 is not a web application, it is a client side application can be used using the click-once or downloaded from Microsoft's website.  If you are having issues, you might download and install it and try running it as an administrator.

  • [svn] 3120: When you point Flex Builder at a local sandbox trunk build, it couldn' t generate the html-templates folder correctly for new projects so we moved all the html templates up one level and removed the html-templates directory and adjusted build

    Revision: 3120
    Author: [email protected]
    Date: 2008-09-05 10:44:10 -0700 (Fri, 05 Sep 2008)
    Log Message:
    When you point Flex Builder at a local sandbox trunk build, it couldn't generate the html-templates folder correctly for new projects so we moved all the html templates up one level and removed the html-templates directory and adjusted build.xml's to accommodate the directory change
    Modified Paths:
    flex/sdk/trunk/build.xml
    flex/sdk/trunk/webapps/webtier/build.xml
    Added Paths:
    flex/sdk/trunk/templates/client-side-detection/
    flex/sdk/trunk/templates/client-side-detection/AC_OETags.js
    flex/sdk/trunk/templates/client-side-detection/index.template.html
    flex/sdk/trunk/templates/client-side-detection-with-history/
    flex/sdk/trunk/templates/client-side-detection-with-history/AC_OETags.js
    flex/sdk/trunk/templates/client-side-detection-with-history/history/
    flex/sdk/trunk/templates/client-side-detection-with-history/history/history.css
    flex/sdk/trunk/templates/client-side-detection-with-history/history/history.js
    flex/sdk/trunk/templates/client-side-detection-with-history/history/historyFrame.html
    flex/sdk/trunk/templates/client-side-detection-with-history/index.template.html
    flex/sdk/trunk/templates/express-installation/
    flex/sdk/trunk/templates/express-installation/AC_OETags.js
    flex/sdk/trunk/templates/express-installation/index.template.html
    flex/sdk/trunk/templates/express-installation/playerProductInstall.swf
    flex/sdk/trunk/templates/express-installation-with-history/
    flex/sdk/trunk/templates/express-installation-with-history/AC_OETags.js
    flex/sdk/trunk/templates/express-installation-with-history/history/
    flex/sdk/trunk/templates/express-installation-with-history/history/history.css
    flex/sdk/trunk/templates/express-installation-with-history/history/history.js
    flex/sdk/trunk/templates/express-installation-with-history/history/historyFrame.html
    flex/sdk/trunk/templates/express-installation-with-history/index.template.html
    flex/sdk/trunk/templates/express-installation-with-history/playerProductInstall.swf
    flex/sdk/trunk/templates/metadata/
    flex/sdk/trunk/templates/metadata/AC_OETags.js
    flex/sdk/trunk/templates/metadata/readme.txt
    flex/sdk/trunk/templates/no-player-detection/
    flex/sdk/trunk/templates/no-player-detection/AC_OETags.js
    flex/sdk/trunk/templates/no-player-detection/index.template.html
    flex/sdk/trunk/templates/no-player-detection-with-history/
    flex/sdk/trunk/templates/no-player-detection-with-history/AC_OETags.js
    flex/sdk/trunk/templates/no-player-detection-with-history/history/
    flex/sdk/trunk/templates/no-player-detection-with-history/history/history.css
    flex/sdk/trunk/templates/no-player-detection-with-history/history/history.js
    flex/sdk/trunk/templates/no-player-detection-with-history/history/historyFrame.html
    flex/sdk/trunk/templates/no-player-detection-with-history/index.template.html
    Removed Paths:
    flex/sdk/trunk/templates/html-templates/

    Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them.  This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

  • Trying to understand capabilities of Flash Professional and Flash Builder 4

    I recently purchased the CS5 Master Collection and am struggling to understand the uses for Flash Professional and Flash Builder 4.  I was inspired by Jay Pavlina's Super Mario Crossover game and wish to make similar applications. 
    However, I am confused about whether I should be using Flash Professional or Flash Builder 4 or both?  I purchased the two books that Jay Pavlina recommended "ActionScript 3.0 Animation Making Things Move!" and "Essential ActionScript 3.0".  I've been trying to find resources that will help me understand exactly the purpose of each of these applications. 
    It appears to me that ActionScript 3.0 is used in both?  So which one should I be using?  Or both?  Or is one more design oriented and the other more development oriented?  Can one make flash game like Jay's using just one or the other?  Any help would be greatly appreciated.

    I thought about it a bit more. I think you should take my advice with a grain of salt. I am still standing behind what I said but there are some circumstances that we are not in control of.
    If your task is to be the beginning and the end of your code - don't bother with Flash IDE. BUT, if you plan to monetize on your Flash/ActionScript skills, you may not have choice but be familiar with as many environments as possible.
    Here is my personal experiense that illustrates this point.
    I always prayed to gods, chanted to mandalas and made offerings to spirits to avoid a single thing - not ever deal with custom Flash components. Rightly or wrongly I perceive them as one of the lamest Macromedia creations. I am not talking about SWCs but about this thing that you create with preview and all other crap. Above all, it did not (and still doesn't) make much sense to me from functionality standpoint.
    Anyway, as, I guess, a karmic retribution, I was dealt this card. I got involved in a project(s) where I was not told that my main task would be to, you are right, write and reverse engineer Flash custom components. If I did not know Flash IDE I would be totally lost. Custom components are so counter-intuitive that only people without programming background can view them as a convenience. Well, it is a convenience if they are written correctly.
    The point is that, if you want to make a career out of it, you should gradually get involved with Flash IDE for now. The truth is that there are tons of agencies out there that do not have resources to hire high level developers and they employ "drag n' drop, cut n' paste" individuals. And this is a real market segment. Even well seasoned development houses have to succumb to this reality and cater to such entities.
    It is your choice, of course, but I thought it wouldn't be fare to you to be very fascist about pushing my one-sided views.

  • Timeout in ESB and Integration Builder

    Hi,
    The Enterprise Service Builder, Runtime Workbench and Integration Builder browser will time out after a certain time limit.  Can someone point me to where these default times can be changed in the NWA for PI 7.1?
    I searched and found one thread on this, but it was not answered.
    Thanks in advance for your input.
    Regards,
    Rick

    Hi Rick,
    Actually this is the BASIS issue.
    Logon to PI system and execute the transaction RZ10 and choose the profile instance and select the Extended maintanance radio button and click on display then you will get the ...j2ee_timeout parameter there you can increase the value.
    Regards
    Ramesh

  • Pattern Matching and Vision Builder 6.0

    Hi,
    When I select a ROI from an image to generate a pattern matching, Builder
    saves it as a PNG file.
    If I open this pattern in other application (Paint Shop Pro 7) to modified
    it and save as a PNG file, after I can't open this file as a pattern into
    Builder, because it is considered as a not valid PNG file.
    I have tested this case in LabView 6.i and this problem doesn't appear.
    Any solution? Thanks.

    When the template is first saved in Vision Builder, pattern matching information is stored in the header of the PNG file. This information lets LabVIEW and Vision Builder know how the template was learned. Paint Shop Pro does not keep this information in the file whenever it is saved so Vision Builder will not recognize it as a valid pattern matching template.
    Jack Arnold
    Application Engineer
    National Instruments

  • Records management and Document builder in SRM with PS

    Hi,
    We are implementing SRM 5.0 with PS ( Public section), can any one share any experience and documentation about Records management and Document builder in SRM with PS.
    Thank you
    Sreedhar Vetcha

    Hi Chris,
    I am having the same issue as Patrizia while using BSP, SRM_DEMO_RECORD & SRM_DEMO_BSPEXT, to search/display, maybe update later the records,documents,and notes that are stored in RM. I have read all the documentation  described in your messages as to how to customize web display BSP application using these 2 BSPs, srm_demo_record & srm_demo_bspext. 
    I tested SRM_DEMO_RECORD with <srm:element> tag embbeded in the layout page, but it lists only the records that associated to a given RMS_ID and SPS_ID, and I wasn't able to get it to display the associated document and notes for a selected RM record. The comments on the iview page in BSP suggest the custom code is needed for initial request from browser and callback event to return the notification for the activities occurred in RM. As you suggested to Patrizia, I wonder if you've some sample code that i could use to make these BSPs work before additional enhancements is needed later.  As far as other prerequisit settings of http access and assigning search interface class to the correct service provider element type using GENSP_QUERY_EXT connection parameter are all properly set with my customer. So i'd feel really grateful if you could forward me the example codes for these BSPS.
    Regards,
    Amy Lee
    SAP NetWeaver Consultant

  • Authorisation in integration and configuration builder

    Hello,
      I wonder how you can set up authorisation within the integration and configuraion builder ? I mean authorisation (security) at the level of 'Party' or 'service' in the configuration builder or 'SWC' or namespace within SWC' in the integration builder. I want certain XI developers to be responsible for 1 or more parties (or 1 or more SWC) and other XI developers for other parties and/or 'SWC'. Is this possible within XI ?
      I see in the configuration builder, you can make a 'user role' (which is not copied back to the ABAP stack) but how can you add users to this user role and how to add this role to a party or business system ?

    Yes, thank, that's what i was looking for.
    The example is made on the integration directory but I created a role in the configuration builder so I guess I will be able to use it their aswell; Thanks a lot ....

  • What is the primary difference between Debug and Release build?

    I'm coming from the world of VS, where there's a clear distinction between a Release and Debug builds. In Xcode I can't seem to see how two are different and how would I benefit from, say, a Debug build. Can someone explain this for me?

    The differences between the Xcode debug and release builds are similar to the differences you'll find on any other system, though the Xcode interface might not present them as obviously. Basically, a debug build preserves all kinds of information that was developed during compilation but is no longer necessary at runtime. The presence or absence of this information (e.g. symbol tables and mappings which provide the original name of each source code variable and the source code line number corresponding to each instruction), becomes increasingly obvious as you use gdb and other debugging tools.
    We normally would never want to release a debug version (in the iOS case, of course, it would never be accepted) because the binary is usually much larger and the performance will probably be compromised as well. For example, a typical debug build will have many perfomance optimizations turned off because these can make debugging more difficult. It's also common to enable "assert" statements in a debug version. These will bring the program down rather than giving the user any options or attempting recovery.
    For more info specific to Xcode, see [Build Configurations|http://developer.apple.com/library/ios/documentation/DeveloperTo ols/Conceptual/XcodeBuildSystem/400-BuildConfigurations/build_configs.html#//appleref/doc/uid/TP40002692-SW7] in the +Xcode Build System Guide+. To get into lower level details, refer to the gcc docs, maybe starting with [3.9 Options for Debugging Your Program or GCC|http://gcc.gnu.org/onlinedocs/gcc/Debugging-Options.html]. You might also want to take a look at your Target Build Options for the Debug configuration (Project->Set Active SDK->Use Base SDK and Project->Edit Active Target->Build). There's a one-to-one mapping between many of these settings and the gcc options.
    \- Ray
    p.s.: Didn't mean to repeat Xnav's points. As usual, I was still editing long after he posted! To clarify one difference: Selecting the Edit Active Target menu item gets you to the same place as double clicking on the icon for the active target in the Targets group of the Groups & Files tree. - R
    Message was edited by: RayNewbie

  • Building in and then building out

    I have a series of bullet points that I'd like to have build in then out one at a time so there's only one bullet at a time on a particular slide. When I try to rearrange the bullet points in the Build Order box of the Inspector it only allows me to move all the Build Ins or all the Build Outs but not one at a time. I'd like to have bullet one build in on the first click and then build out on the second click and same thing with the next two bullets. Is there a way to do this?
    Thanks,
    Marc

    Is there a way to do this? Yes.
    See the Build Inspector, select all the bullets, Build IN, and Delivery by Paragraph
    then
    select all the bullets, Build Out, and Delivery by Paragraph,
    then
    in the Drawer, start shuffling and altering the Start Build until you get what you want.
    Alternately, have each bullet item as a separate object (text block) (which is effectively what the above does) and manipulate as desired.
    Or
    have each bullet on a separate slide and just do a slide transition without builds.

  • What about copy and paste builds?

    In Keynote 2 you can copy and paste attributes which really helps if you are doing an intense project. What would have been great was if Keynote 3 offered you to copy and paste builds as well. I have read here that you can make masters and build the... builds there but what if you want to have a certain build that can be used for let's say a text object. Is there anything like this in Keynote 3?
    Just bought 5 new Keynote 2 licenses so I think it will be a while before we upgrade to number 3. I loved your post Brian about not buying anything before a Mac convention. I just never saw an update to Keynote this soon. I mean there was such a delay between the first two. Oh well you learn something new every day.
    There was something about Keynote 3 becoming just a player after the trial 30 days. Has anyone heard if that "player" is available now with out the trial? And if so does it play on a PC? (grin) Because you know that would be great!
    Green with Envy,
    Adion

    No, you can't copy builds unless you copy the actual object...but you can set builds on the master slide for say, the body box. Not the same thing, but it's leaps better than the old way. The media guy at my church said that feature alone was worth the price of iWork 06 as it saved about 10 min setup time off each presentation he makes.

  • FAQ Builder and Survey Builder Portlet

    I am currently using Oracle Portal Version: 9.0.2.2 and am not able to find the FAQ Builder and Survey Builder Portlet.
    Is this not shipped with this version?
    How can I go about adding these to my pages?

    The first version of Portal in which the survey portlet appeared is: 9.0.4.0.99.

  • Flash learning interaction and Course Builder for CC products?

    Hi all, Could anyone advise me where I could get extension Flash learning interaction for Flash CC and Course Builder for Dreamweaver CC? Sometimes their use and after stopping the development of eLearning Suite I anywhere on the Adobe site found these extensions.
    Thanks for any response.
    Yarik

    You would be better advised to ask these questions on the Flash or Dreamweaver forums.  This is the Adobe Captivate forum.

Maybe you are looking for