FB50 screen layout to include posting key in line item

hi,
could anybody please guide me : how to include posting key in FB50 screen Layout ,
basically the line item details another field : Psting Key needs to be implemented . Aldready tehre are about > 10 fields like
Document , GL Account , Short text , PurchaseOrder etc . But no where posting key is mentioned .
how do we change the FB50 screen layout <at configuration level ? >
Thanks
Trina

well it is a feasibility testing : a requirement from client : required to check if there are any possible ways in which that field can be included .
D/C is heplful bt at certain instance tehre are some erros while posting in transaction stating : "posting key incorrect"
so inorder to check posting key while performing GL Account postings such a req as coem up
Thnaks
Trina

Similar Messages

How to mention posting keys for line items in IDOCS for fb01 posting

Hi all ,
I am using IDOCS for fb01 posting with posting keys 15 and posting keys 40 for line items .The data is in legacy file . I am using IDOC <b>ACC_GL_POSTING_01</b> for posting . Is there any way that I can mention the posting keys in the segment parameters of the IDOC.If there is anyone who have done fb01 posting with IDOCS,please help me with the code .Please treat the question as urgent .
Thanks in advance

Hi Arshad,
There is no fecility to enter Posting keys explicitly.. It is determined automaticall by the Credit/Debit amounts u enter in GL data in the segments E1BPACGL08 and E1BPACCR08 and also it depends on the Customer and Vendor no.
Sreedhar

BDC for F - 43, Multiple posting keys,multiple line items

Dear gurus,
I need to develop a bdc for F-43, it it working for multiple posting keys with two line items, but not working for multiple line items, can you tell me where to loop the line items.
regards,
vidyasagar yadav.

F-43 is actually FB01 (with two parameters, check it with SE93).
So you could use the following FMs in sequence to build the BDC :
POSTING_INTERFACE_START
POSTING_INTERFACE_DOCUMENT
POSTING_INTERFACE_END
Else
Re-execute transaction SHDB for a document with 2 items and for a document with a dozen items and analyze the result.
Use a BAPI like BAPI_ACC_INVOICE_RECEIPT_POST or BAPI_ACC_DOCUMENT_POST
Regards,
Raymond

Screen change as per Posting Key 25/31

Hi,
When we are doing posting with document type KZ and using posting key 25 / 31 for Vendor Payment, Cost Center / Profit center field is not showing...
We want Cost Center / Profit center field specially in posting key 25 / 31...
Please suggest.....

I understand all, for what you told me...
I want Cost center / Profit Center in below screen against 25 / 31 posting key.
Even if i make the required entry in OB41, against Posting key 25, not showing those field during F-02..

I want to capture data through I/O while posting to Customer Line items

Hi Experts
Can you please suggest me that while posting to Customer line items i would require to capture data through Internal Order, is this possible if yes please explain
Regards
Sreenivasulu

Hi
Internal Order details can be updated to the P&L line item ie revenue line item in your case. From ECC 6.0 it will be available in the General Ledger view of the document.
Regards,
Lakshmanan Krishnan

Want to capture data through I/O while posting to Customer Line items

Hi Experts
Can you please suggest me that while posting to Customer line items i would require to capture data through Internal Order, is this possible if yes please explain
Regards
Sreenivasulu

If you are classic GL, this not a standard functionality.
If you are new GL, you can have profit center on customer / vendor line items.
Also activate document splitting.
Regards,
Ravi

Error when posting Open AR Line Items

hello iam posting Open AR Line Items for contract account using message type
CTRACDOCUMENT_CREATE using lsmw idoc method .iam getting error as Document type not defined but actually when iam creating document manually item is created with out any error that means it is defined and my functional consultant is also saying he defined document type.can some body explain me what is the problem.
Regards
priya

Hi Priya,
As you are using the Idoc method, is the Partner profile correctly defined.
Please could you elaborate your error in a bit more detail.

FB50 screen layout

Hi All,
While posting the transaction in FB50 we select Debit or Credit in line item. Now my requirement is to change the D/C column to Posting keys. I want to display posting keys in place of D/C.
Any inputs will be rewarded.
Thanks
~Rajesh

Hi,
This is a standard layout given by SAP which you can not change. The posting key for this you define in customization OBX1 and therfore here you have to give only d/c indicator . The posting key is picked up from the customization automatically.
Warm Regards

Add field to FB50 screen layout

I'm trying to add country code to transaction FB50 at the line item level. I click on the 'configuration' button (blue/yellow grid button), click on administrator and set field acgl_item-grirg as NOT invisible. I then activate and save, but the column doesn't show up. When I go back into the configuration button, the field is checked again to be invisible. How can I make this field not be invisible? Thanks for any help....

Hi,
1. Go to FB50
2. Enter Values befor simulating
3. Click the Configuration button(Green/Yellow & White Button)
4. Create a Varient
5 .Click the Administration button
6. check the Button ACGL_ITEM-GRIRG Deselect the Invisible Check box.
7. Click the Activate System Wide (F5)
8. Click the Close button.
9. Save the Settings
Revert back if any clrifications
If any authorization missing check the Transaction code SU53 and ask to Basis to get the missing authorization.
Regards,
Kishore K

Error 'Enter GL Account' while posting and invoice line item in MIRO

Hello Gurus,
I am facing a rather wierd issue.
While posting a PO invoice in Tcode MIRO, its asking to enter the GL account in line items. Everytime I am entering the GL account and pressing the enter key, it wipes off the GL account clean and gives the same error 'Enter GL account'.
It seems like this error is happening at the very first line item of the invoice. System is able to accept the GL account in 2,3,4th lines. If I delete the first line item, whatever is the first line item in that screen adapts the issue.
Any help would be great as I have no clue what to do.
Thanks

Hello Priyadarshini,
could you inform the error message number and it complete long text?
Regards,
Mateus Grings

Two deductions for invoice with same reason code posted as one line item

Hi
We have a scenario wherein we are taking two or more deductions on the same invoice and are using the same reason code which have a setting of charge off.
SAP system displays the FI posting with same reason codes with charge off setting as one line item.
However we want the FI Posting to display separate line items per deduction and not combine amounts of deductions based on same reason code with charge off setting.
Any comments are appreciated.
Edited by: Kirti Bhardwaj on Jul 24, 2011 9:46 AM

Hi,
you can use different reason codes in distribute differences screen once you have fist selected one reason code for one invoice.

Multiple invoice line items posted as single line item in FI

Dear Gurus,
My client has a specific requirement.
We are required to maintain a rebate condition at item level. In the invoice the values of rebate conditons are appearing as per the line item. This rebate condition has been maintained as statistical and accrual key has been assigend to it. Respective configuration has been done in VKOA. Accural check box has been activated for the rebate condition type.
Now when we are posting the invoice to FI, client requires that instead of line item wise posting of accrual amount it should post entire accrual amount in the single line item. In other words it is like posting of header amount directly, without any line item wise splitting.
Please help me ASAP.
Thanks in advance.
Regards
Piyush Ranpura

Dear Friends,
I am thankful for your replies. But probably I was not able to put the issue is the proper manner. Let us consider this example -
Mat. codes - M1, M2, M3 & M4   Rebate cond. - ABCD    Accrual key - ABC    GL - 12345678
In the invoice, rebate values are determined as follows for the each line item -
For Line item 10, Material M1
ZSHA   -   100
For Line item 20, Material M2
ZSHA   -   125
For Line item 30, Material M3
ZSHA   -   100
For Line item 40, Material M4
ZSHA   -   75
While the invoice is released for accounting follwing entries are there
xx 1 xx
xx 2 xx
xx 3      100 12345678
xx 4      125 12345678
xx 5      100 12345678
xx 6        75 12345678
xx 7 xx
xx 8 xx
But my requirement is
xx 1 xx
xx 2 xx
xx 3    400 12345678
xx 4 xx
xx 5 xx
How it could be done?
Thanks & Regards
Piyush Ranpura
Edited by: Piyush Ranpura on Sep 1, 2010 9:10 AM

Net value posting of 2 line items to 2 g/l accounts

Dear Gurus,
I have a requirement where I have a sales order with 2 different line items and I need to post the net values for which of those line items to different GL accounts. how can i do this
Wishes,
Abhishek

Hi
If both the line items have different Material and these material hve different Account Assignment Group (Material Master : Sales Org 2 view), then certianly you can post it in different G/L. Maintain your setting in VKOA accordngly for where for different Material Account Assignment Group different G/L will be attached for the same Account Keys of Pricing Procedure.
Material Account Assignment Group can be changed manually in Billing also, before posting the document at line item level. So having proper setting of G/L in VKOA and changing the AAG of material while billing you can opt for two different G/L.
Regards
Amitesh Anand

Documents has been posted with out line item

Hi,
Actully my user created GL Account with out line item he posted transactions into documents
Now we are not able to see the documents
T-CODE:FS10N
GL Account
Company code
Fiscal year
when ever click on amount not able to see the documents.
Please give me guide lines to solve this issue.
Thanks&Regards,
Prabhakar

Hi,
For secenario 2, you have to put below validation to achieve your requirement.
Cumulative add quantities of all the entries which are having status 'E' - GR for the combination of PO number and line item number.
Ex: PO no: xyz & two line items 01 and 02
In the EKBE table selection screen, give PO number and line item number. Then system will display all histery for that PO line item.
then collect all the entries which are having status 'E'. Now, we have only all GR entries ( 101 & 102)
Add quantities of all the entris which are having movemnt type 101 and 102 separately.
Substract sum with movement type1 from the sum wiyh movement ment type 102.
If result is zero, that means no GR posted. Total PO quantity open.
Then this case only, system should allow for chnages.
Regards
KRK

KR doc type posted without vendor line item a mandatory item category

Hello Gurus,
We have SPL document splitter activated in our ECC system. We have the business transaction variant 0300 / Z001 assigned to doc type KR. The vendor line is obligatory in the above business transaction variant (BTV). THe splitting rule is also assigned for this BTV.
THe problem is that despite having the vendor as obligatory for this BTV, we are able to post the doc type KR (vendor invoice) without the vendor line item e.g.. doc with doc type KR and debit and credit to expense a/c.
Please share your experience if anyone has come across this issue,
Prakash

Hi,
To make the vendor line mandatory for KR document type, you can write the validation as below:-
Step 1:-
Create a message ID via transaction code SE91 for message class /EACC/MSG/ACC_COMP as you want to display to user.
Step 2:-
Go to transaction GGB0 and create the validation step at complete document level in Financial Accounting as below:-
Pre Requisits:-
BKPF-BLART = 'KR'.
Check:-
Create a exit code using user exit and check that line items have at least one vendor line item.
For this take the help of ABAPer and create a copy of the program RGGBR000 and code your check here and assign to the application area GBLR in view V_T80D via transaction code SM30.
Message:-
Message created in step 1 as error message.
Step 3:-
Please also check that this validation has active status (Status=1) at line complete document level (level 3) for your company code in transaction OB28.
Regards,
Gaurav

FB50 screen layout to include posting key in line item

Similar Messages

Maybe you are looking for