FB60 Line item User exit/BADI/BTE

Hi Guys,
I need a user exit/ BADI/BTE to change the Line item in FB60 transaction. Please let me know ifyou know any enhancment on this. Thanks
Regards,
Ganesh

Hi Dude,
Following are the list of BADIS for FB60 tcode
BADI_FDCB_SUBBAS01
BADI_LAYER
BADI_FDCB_SUBBAS02
PPA_CUST_BADI
BADI_FDCB_SUBBAS03
WRF_PREPAY_INVOICE
BADI_FDCB_SUBBAS04
BADI_FDCB_SUBBAS05
ADDR_LANGU_TO_VERS
ADDR_PRINTFORM_SHORT
BADI_MATN1
For your requirement the releavant badi is PPA_CUST_BADI
Thanks & Regards
Ramakrishna Pathi

Similar Messages

User Exit / Badi / BTE for Asset creation A ?

Hi Experts,
I need User Exit / BADI / BTE for asset Creation.
After saving newly created Asset from As01 we need to send a mail to the person for whom the Asset is assigned.
i have tried all this.But no one is triggering after saving the As01 transaction.
Exit Name           Description
AAPM0001            Integration of asset accounting and plant maintenance
AFAR0003            External changeover method
AFAR0004            Determination of proportional values for retirement
AINT0004            Change amount posted for certain areas
AINT0005            Dummy for extended syntax check. Do not use.
AISA0001            Assign Inventory Number
AIST0001            Exchange number range in master data maintenance
AIST0002            Customer fields in asset master
AMSP0002            Determine relationship type for two company codes
TRAN0001            User exit for asset transfer
Please suggest if anybody worked on this.
regards,
Imran

Hi,
Check out the following posts pertaining to similar topic.
Change Asset Workflow
Asset Management WORKFLOW
Regards
Sreekanth

User-Exit / Badi / BTE for STWB_WORK for integrating 3rd party tool

Hi,
I need a user-exit / badi / BTE for the transaction STWB_WORK user test worklist. I'm trying to integrate a 3rd party tool to this transaction. When a worklist from this transaction is selected, i'll run the 3rd party tool executable from abap coding in the user-exit/badi/bte. Can anybody help me find one?
thanks,
Venky

Hello Venky,
I saw your question in sdn and I am wondering, if you got a solution for your question.
I will be very happy, if you can help me you. I have the same problem as you.
cu Manfred

USER-EXIT /BADI/ BTE for ROUTING.

Hi,
Can somebody help us with USER-EXIT / BADI / BTE which gets triggered when a routing is being saved? (TX CA01 and CA02)
We try to use BADI CUSLNTRTO_ADDIN but it does not meet our requirements.
Regards.

Hi,
You can find it own your own. In one session open SE37 and FM BF_FUNCTIONS_FIND. Set a break-point at call function syntax. Then in another session open F871 and create a doc. Now the system stops at the break-point. Read the container I_EVENT. It'll container the BTE that is triggered when this doc. is created. Then customize that BTE using tcode FIBF.
Regards,
Raj

Automatic posting (user-exit, BADI, BTE...)

Hello, saperos (as we are known in Spain).
We have a requirement from our customer in order to post automatic documents (with call transaction or BAPI) just after the posting of another. I have doubts about the mechanism to do this, maybe a BADI, BTE...? The full business process is like this:
1) Post of down payment.
2) Post of invoice (same vendor). Just after this document is saved, we need to post "automatically" a clearing document to the previous down payment (F-54).
Do you know about a user-exit, BADI or BTE to do this?
Thanks in advance.

Try using BADI 'AC_DOCUMENT'. Trnasaction SE18.
Regards,
Vishal Thakur.

User-Exit/BADI/BTE for transaction /COCKPIT/1

Hi everybody,
I need to send and Idoc when a MM invoice enters the system from transaction /COCKPIT/1.
I already made a function to send the idoc but now I'm having trouble to find a place to fire it.
Any help would be very much appreciated.
Thanks.
Fábio Galvã

Hi ,
I dont know if replying on such an old link will help.
Did you find the user exit /Badi for this transaction?
Regards,
Kushmeen

Validation \ User-exit \ BADI \ BTE for F-43 for missing exchange rate

Hi,
I maintain the exchange rate on a daily basis in TCURR exchange rate table.
But, let's say that, by accident, in one day I fail to input the exchange rate.
In this case, when I input a invoice in F-43, I'd like for the system to issue a warning (blocking) message saying that there is no exchange rate for that specific posting (translation) date.
I tryed to create a validation for F-43. But the conditions available in validation are just too simple and I couldn't achieve my goal.
However, I saw I can attach an user exit to the validation or an user exit directly in F-43.
I found in SMOD the following user-exits for F-43 (in package FBAS), but I don't know how to use them:
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
SAPLF051 Workflow for FI (pre-capture, release for payment)
Can you help me to attach an user-exit to a validation or an user exit directly in F-43 to do the specified validation?
Or maybe this can be done with a BADI \ BTE?

Thanks for the reply.
I succeded creating the validation with an user-exit. I made the following steps:
1) I created the validation in GGB0 (for document header), issuing a standard message (420 "Exchange rate not found") from message class (ZRSAU) - which is a copy of RSAU message class (in the beggining I put no pre-requisites, checks or rules, just the message).
2) In OB28 I attached the validation (with call point document header) and I made it active (without batch input).
3) I copied the RGGBR000 program (which is standard program with an example of validation) into ZRGGBR00 (it should be maximum 8 characters).
Then I changed the ZRGGBR00 program (form U100) comparing the translation date (from BKPF) with the date from table TCURR (and exchange rate type M, and documents currency other than local currency).
If the program doesn't find any exchange rate in TCURR in that date, it issues the error message (assigned in GGB0).
4) In GGB0, I put the U100 user exit as a check and rule
5) In GCX2, I attached the ZRGGBR00 program to the GBLR application area (which is for user exits for validations / rules).
Now it's working fine!

ME21N Update Text in Line Item User Exit

Hi, I have created a new PO text item for use in ME21N that I want to populate from document details held in the material master. After entering a material number what user exit do I need to use to update internal tables for display of the document details before they are saved along with the other PO details. I know the tables where the material document details are held. Thanks.

BADI ME_PROCESS_PO_CUST.
Note that this BADI has a number of methods with parameters defined as "Importing" which makes it look like you cannot change data, but some of these parameters are "TYPE REF TO" objects which themselves have methods such as GET_DATA and SET_DATA that actually allow you to access and change the fields.
Search for previous posts including "ME_PROCESS_PO_CUST" - there is sample code in some of them.
In transaction SE19, if you display the BADI then select menu option goto>sample code>display, you will be able to drill down on the PROCESS_ITEM method to some SAP supplied sample code.
This includes the definitions and method calls to get the item data:
DATA: ls_mepoitem TYPE mepoitem.
ls_mepoitem = im_item->get_data( ).
You then just change relevant fields in structure ls_mepoitem and call the set_data method to pass the data back
call method im_item->set_data exporting im_data = ls_mepoitem.
Take care with what you change - SAP does not validate that you have passed back correct / consistant data.
Not sure if the text field you want will be available - you may need to look at further methods of the BADI or of the parameter objects. If you drill down on the objects that the method parameters are defined as TYPE REF TO you will see the methods that are available - the GET_DATA and SET_DATA ones I have mentioned above are only a small part of the options. If there are none dealing with texts at the Header / Line, then you may need to put your code in at the latest method available (once the PO number is allocated) and call the SAVE_TEXT function module to do your update - not 100% way of doing it because standard code may save in update event and have rollback handling.
To use the BADI you will need to create an implementation of it - there is a menu option in SE18 to do this, or you can use SE19.
Andrew

User-Exit/BADI/BTE Search

Guys,
Got fed-up trying all the other programs which (unsucessfully) try to find user-exits etc.
Here is my attempt...
Any comments would be most welcome..
*& Report ZPJA_PM002 (V2)                                            &*
*& Text Elements:                                                     &*
*& P_DEVC Show user-exits from development class                      &*
*& P_LIMIT Limit submit program selection                             &*
*& P_FUNC Show function modules                                       &*
*& P_SUBM Show submit programs                                        &*
*& S01    Selection data (TCode takes precedence over program name) &*
report zpja_pm002
no standard page heading
line-size 158.
*tables: enlfdir.     "Additional Attributes for Function Modules
data: tabix      like sy-tabix,
      w_linnum   type i,
      w_off      type i,
      w_index    like sy-tabix,
      w_include like trdir-name,
      w_prog     like trdir-name,
      w_incl     like trdir-name,
      w_area     like rs38l-area,
      w_level,
      w_str(50) type c,
      w_funcname like tfdir-funcname.
constants: c_fmod(40) type c value 'Function modules selected: ',
           c_subm(40) type c value 'Submit programs selected: ',
           c_col1(12) type c value 'Enhanmt Type',
           c_col2(40) type c value 'Enhancement',
           c_col3(30) type c value 'Program/Include',
           c_col4(20) type c value 'Enhancement Name',
           c_col5(40) type c value 'Enhancement Description'.
* Work Areas: ABAP Workbench
data: begin of wa_d010inc.
data: master type d010inc-master.
data: end of wa_d010inc.
data: begin of wa_tfdir.
data: funcname type tfdir-funcname,
      pname    type tfdir-pname,
      include type tfdir-include.
data: end of wa_tfdir.
data: begin of wa_tadir.
data: devclass type tadir-devclass.
data: end of wa_tadir.
data: begin of wa_tstc.
data: pgmna type tstc-pgmna.
data: end of wa_tstc.
data: begin of wa_tstcp.
data: param type tstcp-param.
data: end of wa_tstcp.
data: begin of wa_enlfdir.
data: area type enlfdir-area.
data: end of wa_enlfdir.
* Work Areas: BADIs
data: begin of wa_sxs_attr.
data: exit_name type sxs_attr-exit_name.
data: end of wa_sxs_attr.
data: begin of wa_sxs_attrt.
data: text type sxs_attrt-text.
data: end of wa_sxs_attrt.
* Work Areas: Enhancements
data: begin of wa_modsap.
data: member type modsap-member.
data: end of wa_modsap.
data: begin of wa_modsapa.
data: name type modsapa-name.
data: end of wa_modsapa.
data: begin of wa_modsapt.
data: modtext type modsapt-modtext.
data: end of wa_modsapt.
* Work Areas: Business Transaction Events
data: begin of wa_tbe01t.
data: text1 type tbe01t-text1.
data: end of wa_tbe01t.
data: begin of wa_tps01t.
data: text1 type tps01t-text1.
data: end of wa_tps01t.
* user-exits
types: begin of t_userexit,
      type(12) type c,
      pname    like trdir-name,
      txt(300),
      level    type c,
      modname(30) type c,
      modtext(40) type c,
end of t_userexit.
data: i_userexit type standard table of t_userexit with header line.
* Function module developmnet classes
types: begin of t_devclass,
      clas   like trdir-clas,
end of t_devclass.
data: i_devclass type standard table of t_devclass with header line.
* Submit programs
types: begin of t_submit,
      pname     like trdir-name,
      level,
      done,
end of t_submit.
data: i_submit type standard table of t_submit with header line.
* Source code
types: begin of t_sourcetab,                        "#EC * (SLIN lügt!)
        line(200),                                  "#EC * (SLIN lügt!)
      end of t_sourcetab.                           "#EC * (SLIN lügt!)
data: sourcetab type standard table of t_sourcetab with header line.
data c_overflow(30000) type c.
* Description of an ABAP/4 source analysis token
data: i_stoken type standard table of stokex with header line.
data wa_stoken like i_stoken.
* Description of an ABAP/4 source analysis statement
data: i_sstmnt type standard table of sstmnt with header line."#EC NEEDED
* keywords for searching ABAP code
types: begin of t_keywords,
      word(30),
end of t_keywords.
data: keywords type standard table of t_keywords with header line.
* function modules within program
types: begin of t_fmodule,
      name   like rs38l-name,
      pname like trdir-name,
      pname2 like trdir-name,
      level,
      bapi,
      done,
end of t_fmodule.
data: i_fmodule type standard table of t_fmodule with header line.
*& Selection Options                                                  &*
selection-screen begin of block selscr1 with frame title text-s01.
parameter: p_pname like trdir-name memory id rid,
           p_tcode like syst-tcode,
           p_limit(4) type n default 100,
           p_devc like rihea-dy_ofn default ' ',
           p_func like rihea-dy_ofn default ' ',
           p_subm like rihea-dy_ofn default ' '.
selection-screen end of block selscr1.
*& START-OF-SELECTION                                                 &*
start-of-selection.
if p_pname is initial and p_tcode is initial.
    message e008(hrfpm). "Make entry on the selection screen
    stop.
endif.
* ensure P_LIMIT is not zero.
if p_limit = 0.
    p_limit = 1.
endif.
perform data_select.
perform get_submit_data.
perform get_fm_data.
perform get_additional_data.
perform data_display.
*& Form DATA_SELECT                                                   &*
form data_select.
* data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
      text                  = 'Get programs/includes'       "#EC NOTEXT
    exceptions
      system_failure
      communication_failure
    .                                                       "#EC *
* determine search words
keywords-word = 'CALL'.
append keywords.
keywords-word = 'FORM'.
append keywords.
keywords-word = 'PERFORM'.
append keywords.
keywords-word = 'SUBMIT'.
append keywords.
keywords-word = 'INCLUDE'.
append keywords.
if not p_tcode is initial.
* get program name from TCode
    select single pgmna from tstc into wa_tstc-pgmna
                 where tcode eq p_tcode.
    if not wa_tstc-pgmna is initial.
      p_pname = wa_tstc-pgmna.
* TCode does not include program name, but does have refereve TCode
    else.
      select single param from tstcp into wa_tstcp-param
                   where tcode eq p_tcode.
      if sy-subrc = 0.
        check wa_tstcp-param(1)   = '/'.
        check wa_tstcp-param+1(1) = '*'.
        if wa_tstcp-param ca ' '.
        endif.
        w_off = sy-fdpos + 1.
        subtract 2 from sy-fdpos.
        if sy-fdpos gt 0.
          p_tcode = wa_tstcp-param+2(sy-fdpos).
        endif.
        select single pgmna from tstc into wa_tstc-pgmna
               where tcode eq p_tcode.
        p_pname = wa_tstc-pgmna.
        if sy-subrc <> 0.
          message e110(/saptrx/asc) with 'No program found for: ' p_tcode."#EC NOTEXT
          stop.
        endif.
      else.
        message e110(/saptrx/asc) with 'No program found for: ' p_tcode."#EC NOTEXT
        stop.
      endif.
    endif.
endif.
* Call customer-function aus Program coding
read report p_pname into sourcetab.
if sy-subrc > 0.
    message e017(enhancement) with p_pname raising no_program."#EC *
endif.
scan abap-source sourcetab tokens     into i_stoken
                             statements into i_sstmnt
                             keywords   from keywords
                             overflow into c_overflow
                             with includes.
if sy-subrc > 0. "keine/syntakt. falsche Ablauflog./Fehler im Skanner
    message e130(enhancement) raising syntax_error.         "#EC *
endif.
* check I_STOKEN for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
    w_level = '0'.
    w_prog = ''.
    w_incl = ''.
    perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endform.                        "DATA_SELECT
*& Form GET_FM_DATA                                                   &*
form get_fm_data.
* data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
      text                  = 'Get function module data'    "#EC NOTEXT
    exceptions
      system_failure
      communication_failure
    .                                                       "#EC *
* Function module data
sort i_fmodule by name.
delete adjacent duplicates from i_fmodule comparing name.
loop at i_fmodule where done ne 'X'.
    clear:   i_stoken, i_sstmnt, sourcetab, wa_tfdir, w_include .
    refresh: i_stoken, i_sstmnt, sourcetab.
    clear wa_tfdir.
    select single funcname pname include from tfdir into wa_tfdir
                            where funcname = i_fmodule-name.
    check sy-subrc = 0.
    call function 'FUNCTION_INCLUDE_SPLIT'
      exporting
        program = wa_tfdir-pname
      importing
        group   = w_area.
    concatenate 'L' w_area 'U' wa_tfdir-include into w_include.
    i_fmodule-pname = w_include.
    i_fmodule-pname2 = wa_tfdir-pname.
    modify i_fmodule.
    read report i_fmodule-pname into sourcetab.
    if sy-subrc = 0.
      scan abap-source sourcetab tokens     into i_stoken
                                 statements into i_sstmnt
                                 keywords   from keywords
                                 with includes.
      if sy-subrc > 0.
        message e130(enhancement) raising syntax_error.
      endif.
* check i_stoken for entries
      clear w_linnum.
      describe table i_stoken lines w_linnum.
      if w_linnum gt 0.
        w_level = '1'.
        w_prog = i_fmodule-pname2.
        w_incl = i_fmodule-pname.
        perform data_search tables i_stoken using w_level w_prog w_incl.
      endif.
    endif.
endloop.
if p_devc = 'X'.
    loop at i_fmodule.
      clear: wa_tadir, wa_enlfdir.
      select single area from enlfdir into wa_enlfdir-area
                            where funcname = i_fmodule-name.
      check not wa_enlfdir-area is initial.
      select single devclass into wa_tadir-devclass
                      from tadir where pgmid    = 'R3TR'
                                   and object   = 'FUGR'
                                   and obj_name = wa_enlfdir-area.
      check not wa_tadir-devclass is initial.
      move wa_tadir-devclass to i_devclass-clas.
      append i_devclass.
      i_fmodule-done = 'X'.
      modify i_fmodule.
    endloop.
    sort i_devclass.
    delete adjacent duplicates from i_devclass.
endif.
endform.                        "GET_FM_DATA
*& Form GET_SUBMIT_DATA                                               &*
form get_submit_data.
* data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
      text                  = 'Get submit data'             "#EC NOTEXT
    exceptions
      system_failure
      communication_failure
    .                                                       "#EC *
sort i_submit.
delete adjacent duplicates from i_submit comparing pname.
w_level = '0'.
loop at i_submit where done ne 'X'.
    clear:   i_stoken, i_sstmnt, sourcetab.
    refresh: i_stoken, i_sstmnt, sourcetab.
    read report i_submit-pname into sourcetab.
    if sy-subrc = 0.
      scan abap-source sourcetab tokens     into i_stoken
                                 statements into i_sstmnt
                                 keywords   from keywords
                                 with includes.
      if sy-subrc > 0.
*        message e130(enhancement) raising syntax_error.
        continue.
      endif.
* check i_stoken for entries
      clear w_linnum.
      describe table i_stoken lines w_linnum.
      if w_linnum gt 0.
        w_prog = i_submit-pname.
        w_incl = ''.
        perform data_search tables i_stoken using w_level w_prog w_incl.
      endif.
    endif.
* restrict number of submit program selected for processing
    describe table i_submit lines w_linnum.
    if w_linnum ge p_limit.
      w_level = '1'.
    endif.
    i_submit-done = 'X'.
    modify i_submit.
endloop.
endform.                       "GET_SUBMIT_DATA
*& Form DATA_SEARCH                                                   &*
form data_search tables p_stoken structure stoken
                        using p_level p_prog p_incl.
loop at p_stoken.
    clear i_userexit.
    tabix = sy-tabix + 1.
    i_userexit-level = p_level.
    if i_userexit-level = '0'.
      if p_incl is initial.
        i_userexit-pname = p_pname.
      else.
        concatenate p_pname '/' p_incl into i_userexit-pname.
      endif.
    else.
      if p_incl is initial.
        i_userexit-pname = p_prog.
      else.
        concatenate p_prog '/' p_incl into i_userexit-pname.
      endif.
    endif.
* Include
    if p_stoken-str eq 'INCLUDE'.
      check p_level eq '0'.    " do not perform for function modules (2nd pass)
      w_index = sy-tabix + 1.
      read table p_stoken index w_index into wa_stoken.
      check not wa_stoken-str cs 'STRUCTURE'.
      check not wa_stoken-str cs 'SYMBOL'.
      read table i_submit with key pname = wa_stoken-str.
      if sy-subrc <> 0.
        i_submit-pname = wa_stoken-str.
        i_submit-level = p_level.
        append i_submit.
      endif.
    endif.
* Enhancements
    if p_stoken-str eq 'CUSTOMER-FUNCTION'.
      clear w_funcname.
      read table p_stoken index tabix.
      translate p_stoken-str using ''' '.
      condense p_stoken-str.
      if p_prog is initial.
        concatenate 'EXIT' p_pname p_stoken-str into w_funcname
                     separated by '_'.
      else.
        concatenate 'EXIT' p_prog p_stoken-str into w_funcname
               separated by '_'.
      endif.
      select single member from modsap into wa_modsap-member
            where member = w_funcname.
      if sy-subrc = 0.   " check for valid enhancement
        i_userexit-type = 'Enhancement'.
        i_userexit-txt = w_funcname.
        append i_userexit.
      else.
        clear wa_d010inc.
        select single master into wa_d010inc-master
              from d010inc
                 where include = p_prog.
        concatenate 'EXIT' wa_d010inc-master p_stoken-str into w_funcname
               separated by '_'.
        i_userexit-type = 'Enhancement'.
        i_userexit-txt = w_funcname.
      endif.
    endif.
* BADIs
    if p_stoken-str cs 'cl_exithandler='.
      w_index = sy-tabix + 4.
      read table p_stoken index w_index into wa_stoken.
      i_userexit-txt = wa_stoken-str.
      replace all occurrences of '''' in i_userexit-txt with space.
      i_userexit-type = 'BADI'.
      append i_userexit.
    endif.
* Business transaction events
    if p_stoken-str cs 'OPEN_FI_PERFORM'.
      i_userexit-type = 'BusTrEvent'.
      i_userexit-txt = p_stoken-str.
      replace all occurrences of '''' in i_userexit-txt with space.
      i_userexit-modname = i_userexit-txt+16(8).
      case i_userexit-txt+25(1).
        when 'E'.
          clear wa_tbe01t.
          select single text1 into wa_tbe01t-text1 from tbe01t
                           where event = i_userexit-txt+16(8)
                             and spras = sy-langu.
          if wa_tbe01t-text1 is initial.
            i_userexit-modtext = '<Not active>'.            "#EC NOTEXT
          else.
            i_userexit-modtext = wa_tbe01t-text1.
          endif.
          i_userexit-modname+8 = '/P&S'.                    "#EC NOTEXT
        when 'P'.
          clear wa_tps01t.
          select single text1 into wa_tps01t-text1 from tps01t
                           where procs = i_userexit-txt+16(8)
                             and spras = sy-langu.
          i_userexit-modtext = wa_tps01t-text1.
          i_userexit-modname+8 = '/Process'.
      endcase.
      append i_userexit.
    endif.
* Program exits
    if p_stoken-str cs 'USEREXIT_'.
      i_userexit-type = 'Program Exit'.
      i_userexit-txt = p_stoken-str.
      replace all occurrences of '''' in i_userexit-txt with space.
      append i_userexit.
    endif.
* Submit programs
    if p_stoken-str cs 'SUBMIT'.
      check p_level eq '0'.    " do not perform for function modules (2nd pass)
      check not p_stoken-str cs '_'.   " ensure not SUBMIT_XXX
      w_index = sy-tabix + 1.
      read table p_stoken index w_index into wa_stoken.
      check not wa_stoken-str cs '_'.   " ensure not SUBMIT_XXX
      replace all occurrences of '''' in wa_stoken-str with space.
      read table i_submit with key pname = wa_stoken-str.
      if sy-subrc <> 0.
        i_submit-pname = wa_stoken-str.
        i_submit-level = p_level.
        append i_submit.
      endif.
    endif.
* Perform routines (which reference external programs)
    if p_stoken-str cs 'PERFORM'.
      check p_level eq '0'.    " do not perform for function modules (2nd pass)
      w_index = sy-tabix + 1.
      read table p_stoken index w_index into wa_stoken.
      if not wa_stoken-ovfl is initial.
        w_off = wa_stoken-off1 + 10.
        w_str = c_overflow+w_off(30).
        find ')' in w_str match offset w_off.
        w_off = w_off + 1.
        wa_stoken-str = w_str(w_off).
      endif.
      check wa_stoken-str cs '('.
      w_off = 0.
      while sy-subrc = 0.
        if wa_stoken-str+w_off(1) eq '('.
          replace section offset w_off length 1 of wa_stoken-str with ''.
          replace all occurrences of ')' in wa_stoken-str with space.
          read table i_submit with key pname = wa_stoken-str.
          if sy-subrc <> 0.
            i_submit-pname = wa_stoken-str.
            append i_submit.
          endif.
          exit.
        else.
          replace section offset w_off length 1 of wa_stoken-str with ''.
          shift wa_stoken-str left deleting leading space.
        endif.
      endwhile.
    endif.
* Function modules
    if p_stoken-str cs 'FUNCTION'.
      clear i_fmodule.
      check p_level eq '0'.    " do not perform for function modules (2nd pass)
      w_index = sy-tabix + 1.
      read table p_stoken index w_index into wa_stoken.
**      if wa_stoken-str cs 'WF_'.
*      if wa_stoken-str cs 'IF_'.
*        break-point.
*      endif.
      if wa_stoken-str cs 'BAPI'.
        i_fmodule-bapi = 'X'.
      endif.
      replace first occurrence of '''' in wa_stoken-str with space.
      replace first occurrence of '''' in wa_stoken-str with space.
      if sy-subrc = 4.   " didn't find 2nd quote (ie name truncated)
        clear wa_tfdir.
        concatenate wa_stoken-str '%' into wa_stoken-str.
        select single funcname into wa_tfdir-funcname from tfdir
                     where funcname like wa_stoken-str.
        if sy-subrc = 0.
          i_fmodule-name = wa_tfdir-funcname.
        else.
          continue.
        endif.
      else.
        i_fmodule-name = wa_stoken-str.
      endif.
      i_fmodule-level = p_level.
      append i_fmodule.
    endif.
endloop.
endform.                        "DATA_SEARCH
*& Form GET_ADDITIONAL_DATA                                           &*
form get_additional_data.
* data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
      text                  = 'Get additional data'         "#EC NOTEXT
    exceptions
      system_failure
      communication_failure
    .                                                       "#EC *
loop at i_userexit.
* Enhancement data
    if i_userexit-type cs 'Enh'.
      clear: wa_modsapa.
      select single name into wa_modsapa-name from modsap
                        where member = i_userexit-txt.
      check sy-subrc = 0.
      i_userexit-modname = wa_modsapa-name.
      clear wa_modsapt.
      select single modtext into wa_modsapt-modtext from modsapt
                        where name = wa_modsapa-name
                                     and sprsl = sy-langu.
      i_userexit-modtext = wa_modsapt-modtext.
    endif.
* BADI data
    if i_userexit-type eq 'BADI'.
      clear wa_sxs_attr.
      select single exit_name into wa_sxs_attr-exit_name from sxs_attr
                                    where exit_name = i_userexit-txt.
      if sy-subrc = 0.
        i_userexit-modname = i_userexit-txt.
      else.
        i_userexit-modname = 'Dynamic call'.                "#EC NOTEXT
      endif.
      clear wa_sxs_attrt.
      select single text into wa_sxs_attrt-text from sxs_attrt
                                     where exit_name = wa_sxs_attr-exit_name
                                       and sprsl = sy-langu.
      i_userexit-modtext = wa_sxs_attrt-text.
    endif.
    modify i_userexit.
endloop.
* get enhancements via program package
clear wa_tadir.
select single devclass into wa_tadir-devclass from tadir
                             where pgmid    = 'R3TR'
                               and object   = 'PROG'
                               and obj_name = p_pname.
if sy-subrc = 0.
    clear: wa_modsapa, wa_modsapt.
    select name from modsapa into wa_modsapa-name
                          where devclass = wa_tadir-devclass.
      select single modtext from modsapt into wa_modsapt-modtext
                          where name = wa_modsapa-name
                            and sprsl = sy-langu.
      read table i_userexit with key modname = wa_modsapa-name.
      if sy-subrc <> 0.
        i_userexit-modtext = wa_modsapt-modtext.
        i_userexit-type = 'Enhancement'.                    "#EC NOTEXT
        i_userexit-modname = wa_modsapa-name.
        i_userexit-txt = 'Determined from program DevClass'."#EC NOTEXT
        i_userexit-pname = 'Unknown'.                       "#EC NOTEXT
        append i_userexit.
      endif.
    endselect.
endif.
endform.                        "GET_ADDITIONAL_DATA
*& Form DATA_DISPLAY                                                  &*
form data_display.
* data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
    destination 'SAPGUI'
    keeping logical unit of work
    exporting
      text                  = 'Prepare screen for display' "#EC NOTEXT
    exceptions
      system_failure
      communication_failure
    .                                                       "#EC *
sort i_userexit by type txt modname.
delete adjacent duplicates from i_userexit comparing txt modname.
* format headings
write: 'Enhancements from main program'.                  "#EC NOTEXT
write: /.
uline.
format color col_heading.
write: /    sy-vline,
         (12) c_col1,                    "Enhanmt Type
              sy-vline,
         (40) c_col2,                    "Enhancement
              sy-vline,
         (30) c_col3,                    "Program/Include
              sy-vline,
         (20) c_col4,                    "Enhancement name
              sy-vline,
         (40) c_col5,                    "Enhancement description
              sy-vline.
format reset.
uline.
* format lines
loop at i_userexit.
* set line colour
    case i_userexit-type.
      when 'Enhancement'.
        format color 3 intensified off.
      when 'BADI'.
        format color 4 intensified off.
      when 'BusTrEvent'.
        format color 5 intensified off.
      when 'Program Exit'.
        format color 6 intensified off.
      when others.
        format reset.
    endcase.
    write: / sy-vline,
             i_userexit-type,
             sy-vline,
             i_userexit-txt(40),
             sy-vline,
             i_userexit-pname(30),
             sy-vline,
             i_userexit-modname(20),
             sy-vline,
             i_userexit-modtext(40),
             sy-vline.
endloop.
format reset.
uline.
* user-exits from development class of function modules
if p_devc = 'X'.
    write: /.
    write: / 'User-exits from function module development class'."#EC NOTEXT
    write: 157''.
    uline (90).
    write: 157''.
    loop at i_devclass.
      clear wa_modsapa.
      select name from modsapa into wa_modsapa
                   where devclass = i_devclass-clas.
        select single name modtext into corresponding fields of wa_modsapt
                                   from modsapt
                                     where name = wa_modsapa-name
                                       and sprsl = sy-langu.
        format color 3 intensified off.
        write: / sy-vline,
                 (12) 'Enhancement',
                 sy-vline,
                wa_modsapa-name,
                sy-vline,
                wa_modsapt-modtext,
                sy-vline.
      endselect.
    endloop.
    uline (90).
    format reset.
endif.
describe table i_fmodule lines w_linnum.
write: / c_fmod , at 35 w_linnum.                         "#EC NOTEXT
write: 157''.
if p_func = 'X'.
* display fuction modules used in program
    uline (38).
    write: 157''.
    loop at i_fmodule.
      write: sy-vline,
             i_fmodule-name,
             sy-vline,
             i_fmodule-bapi,
             sy-vline.
      write: 157''.
    endloop.
    uline (38).
endif.
describe table i_submit lines w_linnum.
write: / c_subm , at 35 w_linnum.                         "#EC NOTEXT
write: 157''.
if p_subm = 'X'.
* display submit programs used in program
    uline (44).
    write: 157''.
    loop at i_submit.
      write: sy-vline,
             i_submit-pname,
             sy-vline.
      write: 157''.
    endloop.
    uline (44).
endif.
* issue message with number of user-exits displayed
describe table i_userexit lines w_linnum.
message s697(56) with w_linnum.
endform.                        "DATA_DISPLAY

HI Peter,
did you try this code t find the user exit..
TABLES : tstc,     "SAP Transaction Codes
         tadir,    "Directory of Repository Objects
         modsapt, "SAP Enhancements - Short Texts
         modact,   "Modifications
         trdir,    "System table TRDIR
         tfdir,    "Function Module
         enlfdir, "Additional Attributes for Function Modules
         tstct.    "Transaction Code Texts
DATA : jtab LIKE tadir OCCURS 0 WITH HEADER LINE.
DATA : field1(30).
DATA : v_devclass LIKE tadir-devclass.
SELECTION-SCREEN BEGIN OF BLOCK a01 WITH FRAME TITLE text-001.
SELECTION-SCREEN SKIP.
PARAMETERS : p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN SKIP.
SELECTION-SCREEN END OF BLOCK a01.
START-OF-SELECTION.
* Validate Transaction Code
SELECT SINGLE * FROM tstc
    WHERE tcode EQ p_tcode.
* Find Repository Objects for transaction code
IF sy-subrc EQ 0.
    SELECT SINGLE * FROM tadir
       WHERE pgmid    = 'R3TR'
         AND object   = 'PROG'
         AND obj_name = tstc-pgmna.
    MOVE : tadir-devclass TO v_devclass.
    IF sy-subrc NE 0.
      SELECT SINGLE * FROM trdir
         WHERE name = tstc-pgmna.
      IF trdir-subc EQ 'F'.
        SELECT SINGLE * FROM tfdir
          WHERE pname = tstc-pgmna.
        SELECT SINGLE * FROM enlfdir
          WHERE funcname = tfdir-funcname.
        SELECT SINGLE * FROM tadir
          WHERE pgmid    = 'R3TR'
            AND object   = 'FUGR'
            AND obj_name = enlfdir-area.
        MOVE : tadir-devclass TO v_devclass.
      ENDIF.
    ENDIF.
* Find SAP Modifactions
    SELECT * FROM tadir
      INTO TABLE jtab
      WHERE pgmid    = 'R3TR'
        AND object   = 'SMOD'
        AND devclass = v_devclass.
    SELECT SINGLE * FROM tstct
      WHERE sprsl EQ sy-langu
        AND tcode EQ p_tcode.
    FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
    WRITE:/(19) 'Transaction Code - ',
    20(20) p_tcode,
    45(50) tstct-ttext.
    SKIP.
    IF NOT jtab[] IS INITIAL.
      WRITE:/(95) sy-uline.
      FORMAT COLOR COL_HEADING INTENSIFIED ON.
      WRITE:/1 sy-vline,
      2 'Exit Name',
      21 sy-vline ,
      22 'Description',
      95 sy-vline.
      WRITE:/(95) sy-uline.
      LOOP AT jtab.
        SELECT SINGLE * FROM modsapt
        WHERE sprsl = sy-langu AND
        name = jtab-obj_name.
        FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
        WRITE:/1 sy-vline,
        2 jtab-obj_name HOTSPOT ON,
        21 sy-vline ,
        22 modsapt-modtext,
        95 sy-vline.
      ENDLOOP.
      WRITE:/(95) sy-uline.
      DESCRIBE TABLE jtab.
      SKIP.
      FORMAT COLOR COL_TOTAL INTENSIFIED ON.
      WRITE:/ 'No of Exits:' , sy-tfill.
    ELSE.
      FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
      WRITE:/(95) 'No User Exit exists'.
    ENDIF.
ELSE.
    FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
    WRITE:/(95) 'Transaction Code Does Not Exist'.
ENDIF.
* Take the user to SMOD for the Exit that was selected.
AT LINE-SELECTION.
GET CURSOR FIELD field1.
CHECK field1(4) EQ 'JTAB'.
SET PARAMETER ID 'MON' FIELD sy-lisel+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
regards
satesh

Sales Order Line Items User Exit - Credit Management/ Exposure Calculation

Hello Folks
I am looking for a solution to a peculiar problem we have in credit management.
In case of Drop Ship sales order life cycle, the system automatically creates two line items per sales order - one each for Freight and Handling Fees. these are NOT relevant to schedule line delivery, nor are they billed to the customer along with the material billing. The default update rule for credit control area concerned is 12. The system, on finding line items not relevant to schedule line delivery automatically switches from rule 12 to 18. This leads to Open Deliveries field (S067-OLIWW) being updated instead of Open Orders (S066-OEIKW) on saving the sales order.
Once the sales order is billed for the material, the system should logically display net value as zero for the open order (as the 2 lines of fees and freight are not yet billed, the order is still open). But the system considers this figure at SALES DOCUMENT HEADER level and considers the net value as the total value of the sales document (including the material that is already billed).
What I am looking for is if there is an exit available whereby the system considers only those line items whose billing status indicator is "not complete". As such, the net value should be updated to the S067-OLIKW field net of the billed items.
Please advise if there is any such user exit available. Also, is there a way to customize this? We are exploring this at our end, but would appreciate an expert advise. Right advise will be awarded with brownie points
Regards
Mandar Barve

VKM1 uses FM SD_ORDER_CREDIT_RELEASE to release orders on credit.

Sales order line item user exit?

Hi Folks,
Can any one of you suggest me an user exit in sales order line item level?
I want something which stops before/ or just after entering the quantity in the item level.
We wanted to set up a issue which deals with rounding profile comming from CMIR record to take from Ship-to rather than standard Sold-to party functionality.
Thanks a TON in advance.
Praveen.

Praveen,
Check this post
https://forums.sdn.sap.com/click.jspa?searchID=7098802&messageID=1674246
Regards,
Satish

Need User exit/BADI or BTE for FF_5

Hi,
My requirement is to enhance the automatic clearing rules for tcode ff_5.
Program RFEBKA00 will upload bank statement items based on the external transaction codes provided by the banks .
The standard posting rules will clear a GL bank account using a set of algorithms for further interpretation
set of standard algorithms do not meet the clearing criteria .hence i need user exit / badi/bte to enhance the automatic clearing rules.
EXIT ZXF01U01& or FEB_BADI are triggering before posting the document.hence i think we can not use these.
Please suggest me the alternate solution.

Hi,
We are facing a similar requirement. We are trying to enhance the interpretation logarithm using search string. The requirement is to update the text field with a Constant Prefix + a number from the Notes to Payee field. For e.g.:
The BAI file transaction data is like:
16,169,94906,V,120108,0000,6008ABS43400024460,783517/
88,TBS EUROPE LTD 203647 10293164
88,/ENTRY-06 FEB
88,TRF/REF 6008ABS43400024475
88,783517 BANK GIRO CREDIT
We defined a search string to find the text 'TBS EUROPE LTD' and if it is found, the search string fetches the number '783517' from the Notes to Payee field and thereafter, at the time of posting, the text field has to be updated with '120108 TBS EUROPE LTD 783517', where 120108 is the validity date of the incoming money through this transaction and which does not form part of the Notes to Payee field.
Also, if just the number '783517' has to be updated in the text field.
Please suggest how to achieve this functionality.
Thanks in advance.
Regards
Sourabh

User Exit / BADI for F-02 during SAVE to update BSEG Line Items.

Hi Experts,
I need a User Exit / BADI for Transaction code F-02 which triggers during save to update BSEG-SGTXT with Vendor / Customer
name in the Tax Line Item.This is to update table BSEG .
Thanks in Advance,
Nithy

Hi,
Do it with the BTE 00001120 (tcode FIBF).
I hope this helps you
Regards,
Eduardo
PD: I forgot, check this link. It will tell you how to do it
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/207835fb-0a01-0010-34b4-fef1240ba9b7
Edited by: Eduardo Hinojosa on Jul 15, 2009 6:38 PM

Request for info. on USER EXIT/BADI for FB60

Hi,
This is with reference to FB60 user exit/badi for with holding tax.I want to use the customized table for withholding tax.
]Please guide some alternative solution rather than user exit and badi.
I dont think the following user exit and badi are used for withholding tax.
I done some analysies.I didnt find any user exit/badi related to withholding tax.I found the following
F050S001 FIDCMT, FIDCC1, FIDCC2: Edit user-defined IDoc segment
F050S002 FIDCC1: Change IDoc/do not send
F050S003 FIDCC2: Change IDoc/do not send
F050S004 FIDCMT, FIDCC1, FIDCC2: Change outbound IDoc/do not send
F050S005 FIDCMT, FIDCC1, FIDCC2 Inbound IDoc: Change FI document
F050S006 FI Outgoing IDoc: Reset Clearing in FI Document
F050S007 FIDCCH Outbound: Influence on IDoc for Document Change
F180A001 Balance Sheet Adjustment
FARC0002 Additional Checks for Archiving MM Vendor Master Data
FEDI0001 Function Exits for EDI in FI
RFAVIS01 Customer Exit for Changing Payment Advice Segment Text
RFEPOS00 Line item display: Checking of selection conditions
RFKORIEX Automatic correspondence
SAPLF051 Workflow for FI (pre-capture, release for payment)
Badi
FQST_CALC_COUNTRY,FQST_CIN_WITHITEM are related with withholding tax and they are for country specific such as India.
Every expert answer will be rewarded.
Thanks in advance
Cra

Try Business Transaction Events. Transaction code BERP.
Regards,
Zoltá

In ME21N,User Exit/BADI for Defaulting Vendor number at item level.

Hi Experts.
In ME21N, for every purchase order, we have condtion tab for each line item.
Many condition typesot taxes are listed based on the config for the materials.
My requirements is, When we go inside by selecting a condition type we find vendor number displayed.
I need a user exit/BADI for defaulting the Vendor number.
Regards
Balaji R

Hi,
check with below link,
fo this one you will find both user exit and badis
https://www.sdn.sap.com/irj/scn/wiki?path=/display/abap/find%252bapplication%252bclass%252bwith%252bexits%252band%252bbadis%252bfor%252ba%252btransaction
Regards,
Madhu

FB60 Line item User exit/BADI/BTE

Similar Messages

Maybe you are looking for