FB70:Field movement 20L5 not found

Hi there, does anyone met problem during FB70 said field movement 20L5 not found. i pasted log as following
Field movement 20L5 not found in client 200
Message no. GI168
Diagnosis
The field movements could not be processed because of table T888M.
Procedure
As a rule, this error only occurs if you set up a new client. This is because:
- the transfer tables have been copied to the new client, but the code has been generated because of the tables. This code is now missing in the new client.
- the transfer tables T888/T888M have not been copied to the new client.
Check whether these tables exist in the client. If they exist, you can generate the code either by running program RGIMOVV0 directly, or maintaining a line in table T888M (change the value in Customizing and afterwards set it right again). To check whether the field movement exists, you can check the field movements in Customizing.
Field movements
i've seeked the tale from other clients but still no value about 20L5. and had executed the program RGIMOVV0, no helps as well.
pls anyone give me some help.
any responses will be awarded
regards,
samson

Hi Sampson,
Have u checked the field status variant for the GL check it? If you are not using Business Area in you company then if you Run Program RM07CUFA in SE38 and compare movement type and GL you can see the comparison of the field status variant of the movement type and GL
Hope this will resolve your issue
Thanks.
Regards,
AVD

Similar Messages

Field Text Property Not Found

I have a Director MX 2004 based training course that is
periodically getting the following error:
property not found: #text
This training program was developed in Director 6.5 and
updated last year to MX 2004. The training program had been running
without error for six years prior to the update. I didn't update
the script that is causing the error until after receiving the
error reports.
After getting the error report I was able to reproduce the
error while running in MX 2004 and the error said:
Script error: Property not found
set the text of member "IN" = tempIN & sp &
pretempIN
#text
I checked the debugger and the local variables were all valid
and nothing seem out of place. The field cast member "IN" exists
and the member's sprite is static in the score (i.e., it's not
being dynamically created).
Since I couldn't figure out what the problem was I updated
the field update scripts to the new syntax:
member("INText", "Internal").text = tempIN & sp &
pretempIN
I also changed the name of the cast member thinking that the
name "IN" may be causing the problem. There are no other cast
members of the same name. Unfortunately, I'm still getting the same
error. There are other field member sprites that are getting
updated successfully before this line of code but for some reason
this particular field member sprite is causing the error, even
after changing the name of the member. I've since moved my text
formatting script to the frame script in the score where the field
members are located and tried preloading the member but neither of
those changes helped.
This error is very sporadic and I've only been able to
reproduce it few times on my local machine, and not since I updated
the script syntax and the field name, but my client is still
encountering the error. I checked that my client's program file
installation is up-to-date and they're running the newest
executable.
Any ideas of what might be causing the problem? I'm
stumped...
Mark

quote:
You seem to be using #field member and #text member
interchangably. They're
not the same type of member and they have different
properties.
Actually, I'm not. It's a field member. The member's name
"INText" probably led you to believe it's a text member. I changed
the member's name from "IN" to "INText" as I thought perhaps the
"IN" may be causing the problem. The member has always been a field
member. I'm not formatting the field or anything like that, I'm
only replacing the field contents. I don't use Director much
anymore, other than this project, but having used both 7.5 and MX,
I assumed that I could access the text property of a field using
the member("myField", "castName").text syntax as per the docs.
As for the concatenation, the variables are all strings so it
shouldn't really matter. The real problem is that the field
member's text property can't be found, not what I'm putting into
it. And the fact that it only happens occasionally is what I can't
figure out. Since I encountered the error myself inside of Director
and was able to run the debugger I was able to see all of the
variables in the debugger and check for the field member and its
properties in the Message window and everything looked okay.
quote:
To double check the member coflickt issue (director always
operates on the first occurance of a member name
It's definitely the only member using the name "INText",
plus, I checked all cast libs and it's a unique name.
When I originally converted the movie I do recall that I had
another cast member named "IN", the original name of the field
member, when I converted the movie. I can't remember the type of
member it was but I'm pretty sure it wasn't a field. Perhaps the
movie still has some kind of reference to that not field member and
may point to it occasionally, even though I've since renamed the
original field cast member to "INText".
Mark

Object FIELD I_S_DATA-0AGE_NC not found. Message no. RS_EXCEPTION111.

Hello all,
I am executing a report based on a infocube. We recently upgraded to 7.0 and the query works ok in 3.5....when I try to run this query, the following error is displayed.
Object FIELD I_S_DATA-******* not found
Message no. RS_EXCEPTION111
when I try to debug the same query in RSRT the following message is displayed.
EObject FIELD I_S_DATA-******* not found RS_EXCEPTION 111
I>> Row: 22 Inc: GET_FIELD_POSITION_D Prog: CL_IM_RS_BCT_PA RS_EXCEPTION 301
Note 924320 as we are at patch 17 for BI.
Please throw some light, full points assured.

Hi,
Above issue might occur when you have Virtual Key Figures in your report. Check the below note 924320.
might help to resolve the issue. Also check if you have any newly added in keyfigures in the infocube and not being used in the Report. If the newly added kefigures are not being identified in the MP do the below steps.
1.Go to the multiprovider...chose the identification
2. In the identification tab....the key figure should be check marked for all the infoproviders in that
3. If not tick mark Generate the query and execute in RSRT
check the note 924320.
Symptom:
When you execute a query with virtual characteristics or key figures, the system issues the following error message:
Object FIELD I_S_DATA-<key figure> not found
Other terms
RSR00002, RSR_OLAP_BADI
Reason and Prerequisites
This problem is caused by a program error.
Solution
If the virtual characteristics or key figures are implemented using the enhancement RSR00002 (CMOD), implement the corrections.
If the virtual characteristics or key figures were created directly as implementations of the RSR_OLAP_BADI BAdI, compare the source code of the INITIALIZE method with the corresponding source code example. During the call of GET_FIELD_POSITIION_D, <L_S_SK>-VALUE_RETURNNM must be transferred instead of <L_S_SFK>-KYFNM.
Hope this helps
Regards
Srikanth

Field Width; BCC not found

Two Mail questions:
1- Is there a way to set the column widths separately in different mailboxes? IOW when I make, say, the Subject field wider in one mailbox or folder it affects all of them. This is quite annoying (Outlook never did that).
2- Where is the BCC field in messages I've sent? I have preferences set to show the bcc field but when I view a message sent to bcc recipients it's not there and I can't see who I sent to.

Thanks for the reply. The View Long Headers option does work. HOWEVER, when searching Mail Help for how to view the long headers I found that I can use Custom in Prefs to show the bcc field in all messages, so thanks.
Now I hope there's an answer to the column width problem.

New movies are not found when connecting to my camera

Hi,
I Use a Sony HDR XR550VE. After soem time of happy use of iMovie, it now no longer discovers new clips at import.
Hooking it up to iMovie and importing new clips has working fine in the beginning untill the point at which I deleted the camera's harddrive content (using the camera's commands), and started making a really long movie (over 6 hrs). THat did not import very well: half of it wasn't discovered via the iMovie import dialogue. Since then, new movies I've shot are not discovered anymore and can't be imported. Accessing the drive directly via the "Import films" option allows me to drill all the way down to the AVCHD-mts source file, but are displayed grayed out and can't be selected to be imported.
Please help.
Thanks,
Jeronias

Hi Jeronias,
Sorry to hear that things have gone a bit pear-shaped for you again.
You may have already tried this, but deleting iMovie's preference file sometimes helps when iMovie is not working as it should. The file can become corrupted in some circumstances, such as when iMovie quits unexpectedly or is "Force Quit".
Close iMovie then, in Finder, navigate to the file named "com.apple.iMovieApp.plist" in your User (Home)>Library>Preferences folder. Drag the .plist file to the Trash. When next opened iMovie will create a fresh file with the default settings, which you can change if desired in iMovie's menu item iMovie>Preferences.
Hopefully, that may get things back to normal.
I'm interested in the procedure you are using (or attempting to use) to import your video into iMovie. I have a similar camcorder, the Sony HDR-SR7, which records AVCHD video to a 60 Gb hard drive. Your model, of course, has a 240 GB hard drive and also records to Memory Stick and SD/SDHC cards.
When I connect my camera via USB and turn it on, a dialogue appears on the LCD touch screen. I then have to touch the hard drive icon in order for the camera to be recognized by my MacBook Pro. With iMovie open, it takes a couple of minutes (maybe less) before the import screen appears. Is this the way you normally go about importing your footage? Of course, you will have 2 import sources - the hard drive and/or a memory card.
Have you tried importing from a memory card using a card reader, rather than connecting the camera? If this works, then the import problem is isolated to the camera itself. I'm assuming that iMovie is not recognizing the hard drive nor the card when the camera is connected via USB.
So, in summary:
What process are you using to import from the camera?
Have you tried using a card reader?
Have you tried deleting the preference file?
John

BDC FOR F-58 - BKPF-BLART NOT FOUND ON DYNPRO

Hi everyone,
I am doing the bdc for tcode F-58 based on the parameters given by SM35. When I run it with the program, it suddenly stops showing the error message, "Field BKPF-BLART not found on dynpro sapmf05a 0129". I need to set the bkpf-blart field to a specific one (electronic payment) but it seems bdc doesn't allowed me to do such a change. do you know how does this happens or how can it be solve, or where can i take a look ?
Thanks on any advice.
Silvia

BKPF-BLART is very much there on the specified screen SAPMF05A 0129.
although quite a few FI transactions behave differently when run normally compared to when a recording is done on them, i don't think this transaction will fall in that category (especially this field). check your code once again.
rgds,
PJ

Allowed goods movement indicator not ticked in Reservations

Hi All,
Currently when i am creating a shopping cart ,the reservations which are created in the backend system do not have the allowed goods movement indicator ticked.can we have it ticked automaticaaly like it is when we normally create the reseravtions manually.
Regards,
Pawan.

Hi Pawan,
Please check the following SAP OSS Notes as well -
Note 373205 EBP: Allow goods movement indicator (manual addition)
Note 373231 EBP: Allow goods movement ind. not in Customizing backend
Note 447352 BBPPS01: Account assignment category of network component
Note 373464 EBP:Reserv.Backnd ind.gds mvmnt permit.(3.1Plug-in)
Note 322674 BBPOR01: Purchasing data are not displayed
Note 520813 FAQ: BAPIs for goods movements
Note 447352 BBPPS01: Account assignment category of network component
The field MOVEMENT is not being filled by SRM in the standard.
You should set it yourself in badi BBP_CREATE_BE_RS_NEW...
BR,
Vijay Mittal.
Please award the points for help.

Order not found or not permitted for goods movement

Hi,
I try to implement Goods Movement by using BAPI_GOODSMVT_CREATE. I try to do it over delivery number. So I use the following code. But somehow it returns "Order not found or not permitted for goods movement" error. I can do the same movement over MIGO transaction. But BAPI can not find the order. Do you have any idea? Do I miss a parameter o something?
Thanks.
data: begin of gmhead.
        include structure bapi2017_gm_head_01.
data: end of gmhead.
data: begin of gmcode.
        include structure bapi2017_gm_code.
data: end of gmcode.
data: begin of mthead.
        include structure bapi2017_gm_head_ret.
data: end of mthead.
data: begin of itab occurs 100.
        include structure bapi2017_gm_item_create.
data: end of itab.
data: begin of errmsg occurs 10.
        include structure bapiret2.
data: end of errmsg.
data: wmenge like iseg-menge,
      error_code(220) type C,
      temp_xchpf like mara-xchpf,
      sbatch like mseg-charg.
DATA : temp_vbeln LIKE likp-vbeln.
gmhead-pstng_date = sy-datum.
gmhead-doc_date   = sy-datum.
gmhead-pr_uname   = 'sy-uname.
gmhead-VER_GR_GI_SLIP = '1'.
gmhead-VER_GR_GI_SLIPX = 'X'.
gmcode-gm_code = '01'.        " for 101
itab-mvt_ind    = 'F'.
itab-plant      = '0001'.
itab-entry_qnt = AMOUNT.
itab-move_type = '101'.
itab-item_text = 'invoice'.
itab-deliv_numb = temp_vbeln.
APPEND itab.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
    goodsmvt_header             = gmhead
    goodsmvt_code               = gmcode
    goodsmvt_headret            = mthead
TABLES
    goodsmvt_item               = itab
    return                      = errmsg.
CLEAR error_code.
LOOP AT errmsg.
IF errmsg-type EQ 'E'.
     error_code = errmsg-message.
ENDIF.
ENDLOOP.
IF error_code IS INITIAL.
COMMIT WORK.
IF sy-subrc NE 0.
    error_code = 'Commit error'.
    EXIT.
ENDIF.
ENDIF.
ERROR_C = error_code.

Dzed,
I set item information but I'm still getting error.
Actually I didn't understand the difference between applying goods movement over delivery number or po number. What is the difference between them?
If I try to use only deliv_num & deliv_item data, BAPI looks for PO and finds nothing and gives error. But when I use PO number and item for goods movement, this time it is still impossible to be successfull(another error). So I decided to use both delivery number and PO together in BAPI; so I filled those fields:
po_number
po_item
deliv_numb
deliv_item
But as you may guess, no success.
There are also another fields for delivery :
deliv_num_to_search
deliv_item_to_search
I have no idea what are they for.
And also there's another field in BAPI header:
red_doc_no
Maybe I have to use this field to pass delivery number. I'm not sure. I'm confused.

Storage Location is not found in Goods Movement Screen in Prod.Order CNF.

Hi Experts,
I have create a production order with Auto GI &GR.When i going to confirm it,in Good Movement Screen storage location entry field is not found thats why i can't enter Sto.Location.
Can any Expert tell me the solution for this issue?
With regards.
Prashant

Dear,
In the material master, MRP2 view maintain Storage loc for material.
Please refer this thread as a reference,
Storage location not found in MIGO for 101 movement type
Regards,
R.Brahmankar

I have downloaded a movie from ITunes. It shows up in my video app. When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded"

I have downloaded a movie from ITunes. It shows up in my video app. When I go to play it I get an error message: "The requested URL was not found on this server". When I checked back on iTunes, where you click to rent or buy a movie it says "Downloaded". Any advice on what I can do in order to watch this movie that I rented a couple of weeks ago?

Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.

TS1717 i was wonering why is it when i restord my iphone5 from my laptop now when i try to play my music and movie a blog pops up saying (the requested URL was not found on this server)?

I was wondering why when i restored my iphoe5 from my laptop now when I try to play my music and movies a blog pops up saying (the requested URL was not found on this server)?

The problem resolved itself when I resynced the iPod with my computer. I suspect the error displayed when I tried syncing with my laptop and canceled out of it.

On my iPad, when I try to open a movie I purchased from iTunes, I get "The requested URL was not found on this server."

On my iPad, when I try to open a movie I purchased from iTunes, I get "The requested URL was not found on this server." It's on my laptop but when I play it there, it 'jerks' every couple of seconds. How can I fix both these issues? Thanks!!

Select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History on your computer.

HT1657 I rented movies on my iPad, they all downloaded, but when I click 'play' it says 'The requested URL was not found on this server'. What does it mean and how can I restore my rented movies?

I rented movies on my iPad, they all downloaded, but when I click 'play' it says 'The requested URL was not found on this server'. What does it mean and how can I restore my rented movies?

See this previous discussion:
https://discussions.apple.com/message/16962474#16962474

Field Catalog Not Found in ALV

Hi Experts,
I am trying to exceute the below code its shows the Field CataLog Not Found
Code is:
TYPE-POOLS:slis.
TABLES:ekpo,mseg.
TYPES: BEGIN OF ty_ekpo,
       ebeln TYPE ekpo-ebeln,
       ebelp TYPE ekpo-ebelp,
       matnr TYPE ekpo-matnr,
       menge TYPE ekpo-menge,
       END OF ty_ekpo.
TYPES: BEGIN OF ty_mseg,
       ebeln TYPE mseg-ebeln,
       ebelp TYPE mseg-ebelp,
       matnr TYPE mseg-matnr,
       menge TYPE mseg-menge,
       bwart TYPE mseg-bwart,
       END OF ty_mseg.
TYPES: BEGIN OF ty_final,
        ebeln TYPE ebeln,
        ebelp TYPE ebelp,
        qtysup TYPE MENGE_D,
        qtyact TYPE MENGE_D,
        qtyrej TYPE MENGE_D,
       END OF ty_final.
DATA: it_mseg TYPE TABLE OF ty_mseg WITH HEADER LINE,
      it_ekpo TYPE TABLE OF ty_ekpo WITH HEADER LINE,
      it_final TYPE TABLE OF ty_final WITH HEADER LINE.
DATA: wa_fieldcat TYPE slis_fieldcat_alv,
      it_fieldcat TYPE slis_t_fieldcat_alv.
DATA:wa_mseg LIKE LINE OF it_mseg,
     wa_ekpo LIKE LINE OF it_ekpo ,
     wa_final LIKE LINE OF it_final.
SELECT-OPTIONS: p_ebeln FOR ekpo-ebeln.
START-OF-SELECTION.
SELECT ebeln ebelp matnr menge FROM ekpo
                                 INTO TABLE it_ekpo
                                 WHERE ebeln IN p_ebeln.
IF it_ekpo[] IS NOT INITIAL.
    SELECT ebeln ebelp matnr menge bwart FROM mseg
                                                INTO TABLE it_mseg
                                                FOR ALL ENTRIES IN it_ekpo[]
                                                WHERE ebeln EQ it_ekpo-ebeln
                                                AND   ebelp EQ it_ekpo-ebelp
                                                AND bwart EQ '122'.
ENDIF.
LOOP AT it_mseg .
    READ TABLE it_ekpo WITH KEY ebeln = it_mseg-ebeln.
    IF sy-subrc EQ 0.
      it_final-qtyrej = it_mseg-menge.
      it_final-qtysup = it_ekpo-menge.
      it_final-ebeln = it_mseg-ebeln.
      it_final-ebelp = it_mseg-ebelp.
    ENDIF.
IF sy-subrc EQ 0.
      it_final-qtyact = ( it_final-qtysup ) - ( it_final-qtyrej ).
    ENDIF.
    APPEND it_final.
ENDLOOP.
wa_fieldcat-fieldname = 'EBELN'.
wa_fieldcat-tabname   = 'IT_FINAL'.
wa_fieldcat-seltext_l = 'Purchase Doc'.
wa_fieldcat-seltext_m = wa_fieldcat-seltext_l.
wa_fieldcat-seltext_s = wa_fieldcat-seltext_l.
wa_fieldcat-col_pos     = 1.
wa_fieldcat-outputlen   = 10.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'EBELP'.
wa_fieldcat-tabname   = 'IT_FINAL'.
wa_fieldcat-seltext_l = 'Item'.
wa_fieldcat-seltext_m = wa_fieldcat-seltext_l.
wa_fieldcat-seltext_s = wa_fieldcat-seltext_l.
wa_fieldcat-col_pos     = 2.
wa_fieldcat-outputlen   = 5.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'QTYSUP'.
    wa_fieldcat-tabname   = 'IT_FINAL'.
wa_fieldcat-seltext_l = 'QuatitySupply'.
wa_fieldcat-seltext_m = wa_fieldcat-seltext_l.
wa_fieldcat-seltext_s = wa_fieldcat-seltext_l.
wa_fieldcat-col_pos     = 3.
wa_fieldcat-outputlen   = 13.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'QTYACT'.
    wa_fieldcat-tabname   = 'IT_FINAL'.
wa_fieldcat-seltext_l = 'QualityAccepted'.
wa_fieldcat-seltext_m = wa_fieldcat-seltext_l.
wa_fieldcat-seltext_s = wa_fieldcat-seltext_l.
wa_fieldcat-col_pos     = 4.
wa_fieldcat-outputlen   = 13.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = 'QTYREJ'.
wa_fieldcat-tabname   = 'IT_FINAL'.
wa_fieldcat-seltext_l = 'QualityRejected'.
wa_fieldcat-seltext_m = wa_fieldcat-seltext_l.
wa_fieldcat-seltext_s = wa_fieldcat-seltext_l.
wa_fieldcat-col_pos     = 5.
wa_fieldcat-outputlen   = 13.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
DATA: repid LIKE sy-repid.
repid = sy-repid.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
   EXPORTING
      I_CALLBACK_PROGRAM             = repid
    TABLES
      t_outtab                       = it_final[]
EXCEPTIONS
    PROGRAM_ERROR                  = 1
    OTHERS                         = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks In Advance
Poorna

Hi,
pass parametrs as it is given below...
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
I_INTERFACE_CHECK              = ' '
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                = ' '
I_CALLBACK_PROGRAM             = repid
I_CALLBACK_PF_STATUS_SET       = ' '
I_CALLBACK_USER_COMMAND        = ' '
I_STRUCTURE_NAME               =
IS_LAYOUT                      =
IT_FIELDCAT                    = it_fieldcat
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_DEFAULT                      = 'X'
I_SAVE                         = ' '
IS_VARIANT                     =
IT_EVENTS                      =
IT_EVENT_EXIT                  =
IS_PRINT                       =
IS_REPREP_ID                   =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
IR_SALV_LIST_ADAPTER           =
IT_EXCEPT_QINFO                =
I_SUPPRESS_EMPTY_DATA          = ABAP_FALSE
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
TABLES
    t_outtab                       = it_final[]
EXCEPTIONS
PROGRAM_ERROR                  = 1
OTHERS                         = 2
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks & Regards
Ashu

"Field Catalog not found" ...problem in ALV reporting !!

Hi,
When i execute my report program where in I generate a Selection screen, I am able to select the values in the selection screen. Once I click on the execute button I get the message
"Field Catalog not found"...
The elabore message is
"Field Catalog cannot be determined becaus the output table structure name was not specified"
Where am I wrong ??
Find below my code ...
*& Report Z_MIGO_TXJCD_REPORT
REPORT Z_MIGO_TXJCD_REPORT.
TYPE-POOLS: slis.
TABLES: makt,mseg,zmigo_extend,ttxj,mkpf.
DATA: BEGIN OF migo_data OCCURS 0,
       matnr LIKE mseg-matnr,
       werks LIKE mseg-werks,
       lgpla LIKE mseg-lgpla,
       bwart LIKE mseg-bwart,
       menge LIKE mseg-menge,
       dmbtr LIKE mseg-dmbtr,
       budat LIKE mkpf-budat,
       txjcd LIKE zmigo_extend-txjcd,
      END OF migo_data.
DATA: it_cat TYPE slis_t_fieldcat_alv,
      wa_lay TYPE slis_layout_alv.
FIELD-SYMBOLS: <fs_cat> LIKE LINE OF it_cat.
SELECT-OPTIONS: so_matnr FOR makt-matnr,
                so_budat FOR mkpf-budat,
                so_werks FOR mseg-werks,
                so_lgpla FOR mseg-lgpla,
                so_bwart FOR mseg-bwart,
                so_txjcd FOR ttxj-txjcd.
START-OF-SELECTION.
SELECT amatnr awerks algpla abwart
         amenge admbtr bbudat ctxjcd INTO TABLE
         migo_data
    FROM mseg AS a INNER JOIN mkpf AS b ON amblnr = bmblnr INNER JOIN
         zmigo_extend AS c ON amblnr = cmblnr
   WHERE a~matnr IN so_matnr
     AND b~budat IN so_budat
     AND a~werks IN so_werks
     AND a~lgpla IN so_lgpla
     AND a~bwart IN so_bwart
     AND c~txjcd IN so_txjcd.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
    EXPORTING
      i_program_name         = sy-cprog
      i_internal_tabname     = 'migo_data'
      i_inclname             = sy-cprog
    CHANGING
      ct_fieldcat            = it_cat
    EXCEPTIONS
      inconsistent_interface = 1
      program_error          = 2
      OTHERS                 = 3.
LOOP AT it_cat ASSIGNING <fs_cat>.
    CLEAR <fs_cat>-key.
ENDLOOP.
wa_lay-zebra = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_grid_title = 'MIGO report with Tax Jurisdiction Code'
      is_layout     = wa_lay
      it_fieldcat   = it_cat
    TABLES
      t_outtab      = migo_data
    EXCEPTIONS
      program_error = 1
      OTHERS        = 2.

Give 'migo_data' in uppercase as ''MIGO_DATA'.

FB70:Field movement 20L5 not found

Similar Messages

Maybe you are looking for