FBB1: group currency not been valuated

Hi Experts,
kindly provide solution to my issue i am facing during foreign currency valuation thru FBB1.
Issue:
Group currency not updated during FC revaluation in Netherlands company code.
company code currency: EUR
CO Area currency: EUR (30, group currency)
when i execute KSB1, the amounts are not showing in Reporting currency EUR and Controlling Area currency EUR.
your valuable inputs are very helpful in solving this issue.

Hi Pavan,
The group currency valuation happens only if the document currency is other than the group currency. Quite possible that though document currency is other than local currency to prompt for local currency valuation but there would be no group currency valuation.
Regards
Bharat

Similar Messages

Group Currency mismatch - FC Valuation Reversal

Good Day!
After running reversal for foreign currency valuation (new GL), we noticed that Group currency was not populated causing a small mismatch.
We ran valuation again after reversal and the open item was still valuated properly. Do you have any idea what caused this?
Thanks in advance.
Jayj

Hi Joseph,
Could you please check if anything's missed out from the layout option when reversal for foreign currency program is run and the output being displayed.
Please go through below URL from WIKI SCN on foreign currency which might help you in sorting out the mismatch.
http://wiki.scn.sap.com/wiki/display/ERPFI/Foreign+Currency+Translation
Regards : Karthikeya

Enhance 2LIS_03_UM to include Material Ledger and Group Currency

Hi all,
I have searching for a solution for this issue for almost a week now both in SDN and Service Marketplace but seems that there is very less informaton about it.
Background:
We are in the process of implementing the standard content for Inventory in BI and have followed all the steps necessary to initialize and load data. Out data matches perfectly with reports such as MC.1 and MB5L however in the Revaluation datasource there is no provision to pickup other currency type for material price maintained in material ledger.
I have been trying to find some User Exit/BADI either in the V1/V2 posting or during V3 collection run to pick the delta in standard price and Moving Average Price (MAP) for these difference currency types but without any success.
We have total three valuations maintained in the ML (Material Ledger)
10 - Local Currency (this is the only one provided in the standard content extractor)
30 - Group Currency With Group Valuation
31 - Group Currency with Legal valuation
Even if I change the Group currency in MR21 the change is picked up by 2LIS_03_BF and with the field BWGEO blank. This is not surprising since this field is for Local currency only.
I am sure that someone must have faced this issue before where material ledger is active, any help is appreciated.
Thanks
Raj

Hi,
Delta load extracts data from Delta Queue based on your update mode selected in LBWE.
Full Load or Init load extracts data from Setup tables, here if you are extracting data from setup tables ? did you fill the setup tables now or not after deleting the existing data of the setup tables?
are you getting same values when compare to R/3 and BW data for some document numbers?

Transaction in group currency

Dear all,
we are implementing FSCM module.
Our customer needs to have transaction in document currency, local currency and group currency.
Table VTBFHAPO shows only document and local currency amounts.
Some of you can tell me how to solve this problem ?
Thanks,
Elena

Hi,
By default in treasury, you can view the transactions in the actual transaction currency and the valuation area currency. In case you want to check in group currency I guess you need to create a new valuation area with the group currency. Then you can check the deals in group currency in that valuation area.
P.S. there is a separate forum for treasury applications which you can use to post treasury related questions. You will get more responses there.
Regards,
Ravi

Valuation Currency not posting Group Currency equivalent

Hi FSCM Experts,
Can you help with this query please? We are activating FSCM FX and Hedge Management components.
We have maintained the Valution Currency as EUR for the company code. The company code has Local Company Code currency of EUR. When the postings to the FI account happen from the TPM1 valuation transaction, the EUR value is only updated in the Loc Curr field. There is no USD equivalent showing in the Loc Curr2 field. There is no value at all updating in the Doc Curr field.
It is required that the values on the GL account also show out in USD equivalent and not just in local currency EUR.
This company code is a USD functional company code. That meas that under transaction OB22 (Additional Local Currencies for Company Code) under sections '1st Local Currency' and '2nd Local Currency' the translation being used is 'Translation taking transaction currency as a basis'. This setting is a fundamental business requirement and cannot be altered.
Due to the fact that the Doc Curr (= Transaction Currency) field is not being updated in the TPM1 posting above, there is no value in the Transaction Currency field and therefore no translation is being done into Loc Curr2 (= Group Currency of USD).
Can you advise is there a way to get the USD equivalent to show on the GL account posting please? For example, is there a way to get the Doc Curr field to be populated when the TPM1 posting is done? If the Doc Curr field could be populated (eg maybe by the Position Currency etc) then the system would be able to do a traslation to USD equivalent amount per the settings in OB22 above.
Thank you for your advise here.

We resolved this using a BADI TPM_ACCIF_TRAC

Hard currency is not valuated in FAGL_FC_VAL along with local and group currency

Hi All,
I have the below system settings for FOREX revaluation. The revaluation is not happening for Hard currency along with local and group currency. The test data and other settings seams to be fine as the below mentioned workaround works perfectly for hard currency revaluation.
I would like to take your expert feedback on this issue to confirm whether this is how SAP works or its an issue with FAGL_FC_VAL program.
System Settings:
Currencies in company code
local currency      group currency      hard currency
10                             30                         40
USD                          USD                    UYU
FOREX settings:
Work around found:
Define two Valuation area, say
1. Valuation Area: A1 which will have currency type 10 and 30.
2. Valuation Area: A2 which will have only the currency type 40.
3. Run FAGL_FC_VAL twice for these area.
Issue with this work around:
1. The valuation area is assigned to one accounting principle (which is in turn assigned to a specific ledger).
2. Thus, if I have different accounting FOREX process to be followed in different ledgers (say IFRS ledger, Local Ledger, Tax ledger) then I need to create 2 valuation area (as per above workaround) for each ledgers and run FAGL_FC_VAL for each of these valuation areas.
Thanks & Regards
Nikhil Kothari

Hi Experts,
Any views on the above issue?
Thanks & Regards
Nikhil Kothari

Alternate Exchange Rate Type Not Picked while converting from Document Currency to Group Currency

Hello Gurus,
We have setup an alternate Exchange Rate type MNB for rate M for the postings happening in Hungary. Local currency is HUF. Group currency is USD.
If the document currency is, lets say, EUR, latest MNB rate is correctly picked up (EUR to HUF) and postings are correctly converted into local currency (HUF).
Although, for the same document, when a group currency is being calculated (EUR to USD), exchange rate type M is being picked up. Same happens if document currency is HUF. Even then, the conversion is based on exchange rate type M.
Is this a normal SAP behavior? How to prevent/correct this? This is also throwing off balances when we check in FAGLB03 or BSEG values in local and group currencies. In OB22, we have local currency1 and local currency 2 setup with exchange rate type M and we may not want to make any changes there as it is setup at global level.
Do we need to run any valuations after the fact? if so, how?
Thank you for your inputs in advance.
Regards,
Sagar

Hi,
You mentioned that "in OB22, we have local currency1 and local currency 2 setup with exchange rate type M". Then, I'm wondering how MNB is picked up for the first local curr. conversion to HUF? It should be 'M' instead. There must be some settings in your instance for such behavior. Can you check that?
Actually, Group Curr. conversion happens with the rate defined for 2nd Loc.Curr.in OB22 which is 'M' in your case. Therefore, all the transactions are converted with M instead of MNB.
Since you can't change OB22 per global co.policy, the exch.rate defined in OBA7 will overrule OB22. However, you've to make sure it's set up for all doc.types which are affected and posted in different curr. than HUF.
As a workaround, another thought would be to maintain the same conversion rate for both exch.rate types MNB & M, for eg. HUF > USD rate is the same both exch.rate type MNB & M. This way, you ensure all transactions are posted with correct exch.rate irrespective of whatever rate type is used.
From business, & global org. perspective, I'm sure they are sending the 'M' exch.rates to all their sister concerns monthly, so they would like to consolidate results as per standard rate in their system. Then, why ,as a local company, would you like to fiddle with standard process? It's a management decision, please run them through again before going ahead.
Thanks,
Nirav

FIFO valuation in Group Currency

Hi Experts,
In our client Materail Ledger is activated. Balance Sheet Valuation Inventory on FIFO was activated. at present we have no problem to execute the FIFO valuation and getting the results for currency 10, i;e., company code currency.
At present business wants to extend this FIFO valuation to Group Currency (means based on the movements in group valuation). I have gone through the all customisation steps, and could not able to find any specific setting for currency option.
Can any one tell me how can i proceed further. will it be possible to valuate the inventory on FIFO basis in Group Currency. If So, Can you please let me know the procedures to be followed.
Thanks & Regards,
S Vasu

Hello Vasu,
You will not need any additional config for the FIFO part since the currency type 10 would act as reference for the group valuation. So you would need to update the settings for currency and valuation profile and the reference variant and transfer control for the group valuation so that it refers to the costing variant used in the legal valuation and the conversion is based on the exchange rate as mentioned in the table.
BR // SG

Group currency amount missing with transaction code FBB1

Hi,
Whenever there is a document posted using transaction code FBB1 there is no updation of amount in group currency. If the document currency is matching with local currency then even the local currency is also with zero value.
Can somebody explain me the functionality of FBB1
Thanks & Regards,
Raghava

Hi Alas,
Please have a look at the following note:
- 335608 Trnsln of 2nd and 3rd lcl crcy fm 1st lcl/trns crcy
I hope this helps.
Best Regards,
Vanessa.

Group Currency in Profit Center Valuation ?

Hello,
We have 3 currencies configured, 1. Local Currency(10), 2.Group Currency(30) 3.Group Currency in Profit Center Valuation(32).
What do you mean by Group Currency in Profit Center Valuation?
Appreciate your help.
Thanks
Srinath

In FI you can manage up to three parallel valuation methods to support transfer prices. The valuation bases are stored using the additional currency and the ledger facilities.
You can use the following valuation methods: 0 - Legal valuation, 1- Group valuation, 2- Profit center valuation.
Also you can have the following currencies: 10 - Company code currency, 30-Group currency, 40-Hard currency, 50-Index-based currency, 60-Global company currency.
The currency and the valuation method are combined in the financial accounting document to form the currency and valuation type. For example, if you want to make a group valuation in the group currency, you enter currency and valuation type 31 in the company code.
IN your case a group valuation in group currency and a profit center valuation in group currency, as well as the legal valuation in company code currency is defined.
The following settings are made in the company code:
The corporate valuation and the profit center valuation are managed in the second and third ledgers, which you have to create yourself. The valuation category used is stored in the ledger master data. You need to enter the relevant currencies in the ledger master record.
You post complete values to each ledger, not delta values. This presentation has the advantage that the parallel valuation methods can be managed in logically and physically separate ledgers. This enables a simple authorization control when accessing the datasets of the parallel valuation methods.
Different valuations can also be stored in the Special Purpose ledgers, just as in the general ledger.
In each ledger master record, you can define whether the ledger manages a legal valuation, a group valuation, or a profit center valuation.

How can I see in my address book all contaacts that have not been placed into groups?

How can I see in my address book the contacts that have not been put into groups?

The best way to do that is create a new "smart group" with the following:
This way you can identify those without a group and drag them to one.
Regards,
Captfred

Document is not showing up group currency in the GL line item display

Greetings,
Could you please advice me as to why document is not showing up the group currency in the line item disply, when all other document posted to that GL are showing it.
Your prompt reply will be appreciated.

Hi
select screen layout and copy gorup currency field.
Hope it will work
Regards
Murali

FCTR calculations not showing in Group currency after SPRUNConversion

Hi,
We are working on legal consolidation. We are following a two step process, in the first step the LC is getting converted into Reporting Curencies and the FCTR differences are being calculated and stored in defined FCTR accounts through script logic.
In the second step we are converting the Reporting currencies into a Group Currency using SPRUNconversion. After this step all the RC's are getting into GC except the FCTR accounts. We have checked the properties of these accounts (Ratetype etc) and they are all properly set. The values of FCTR in reporting currencies are also getting deleted. Any help on why this is happening.
Thanks,
Prasanth.

Hi Abhinav,
Its not mandatory to follow a two step process, we are doing so because of clients requirement.
Usually the standard currencies you want to use for reporting are marked as 'R'. To use a Group currency define a group in your currency dimension and mark that currency_type as 'G' and give it a currency (usually one of the reporting currencies).
You can then run SPRUNConversion with the third parameter (currency) blank and run it once again with the Groups name that you defined as GC. This will show your LC values in reporting currencies and Group currencies.
Thanks,
Prasanth.

Identity Server has not been configured for this new user/group suffix

Hi all
I am having a problem trying to configure the Directory Server (5.2) for Messaging Server.
My configuration is as follows:
SJES Q12005
Server 1 - Directory Server 5.2
Server 1 - Access Manager (formerly Identity Server)
Server 1 - Web Server 6.1
I have successfully installed the above and can login to Access Manager.
I next installed Calendar & Messengar Server on "Server 1". Upon running "comm_dssetup.pl" from /opt/SUNWcomds/sbin, I get the following error:
"Identity Server has not been configured for this new user/group suffix"
Copy and paste of what I entered:
bash-2.05# perl comm_dssetup.pl
Welcome to the Directory Server preparation tool for
Sun Java(tm) System communication services.
(Version 6.3 Revision 1.0)
This tool prepares your directory server for use by the
communications services which include Messaging, Calendar and their components.
The logfile is /var/tmp/dssetup_20050830165940.log.
Do you want to continue [y]:
Please enter the full path to the directory where the Sun ONE
Directory Server was installed.
Directory server root [var/opt/mps/serverroot] : /opt/mps/serverroot
Please select a directory server instance from the following list:
[1] slapd-sunldap
Which instance do you want [1]:
Please enter the directory manager DN [cn=Directory Manager]: cn=DirMan
Password:
Detected DS version 5.2
Will this directory server be used for users/groups [Yes]:
Please enter the Users/Groups base suffix [dc=samplecompany-dev,dc=co,dc=uk] : ou=infrastructure,o=sampletown,dc=samplecompany-dev,dc=co,dc=uk
There are 3 possible schema types:
1 - schema 1 for systems with iMS 5.x data
1.5 - schema 2 compatibility for systems with iMS 5.x data
that has been converted with commdirmig
2 - schema 2 native for systems using Identity Server
Please enter the Schema Type (1, 1.5, 2) [1]: 2
Identity Server has not been configured for this new user/group suffix
You can opt to continue, but you will not be able to use
features that depend on Identity Server
Are you sure you want this schema type? [n]:
I have entered my user group suffix exactly as specified during the Access Manager install (hence I am able to login as "amadmin").
Looking at the LDAP logs to try and figure out whats going wrong I see its not getting hits on all searches it is performing:
[30/Aug/2005:16:41:18 +0100] conn=299 op=159 msgId=161 - SRCH base="ou=services,ou=infrastructure,o=northampton,dc=dataforce-
dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(objectClass=ldapsubentry)))(obj
ectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscapeServer)(objectClass=netscape
Resource)(objectClass=domain))" attrs="dn"
[30/Aug/2005:16:41:18 +0100] conn=299 op=159 msgId=161 - RESULT err=4 tag=101 nentries=1 etime=0
[30/Aug/2005:16:41:18 +0100] conn=299 op=160 msgId=162 - ABANDON targetop=NOTFOUND msgid=161
[30/Aug/2005:16:41:18 +0100] conn=299 op=161 msgId=163 - SRCH base="ou=people,ou=infrastructure,o=northampton,dc=dataforce-de
v,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(objectClass=ldapsubentry)))(objec
tClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscapeServer)(objectClass=netscapeRe
source)(objectClass=domain))" attrs="dn"
[30/Aug/2005:16:41:18 +0100] conn=299 op=161 msgId=163 - RESULT err=0 tag=101 nentries=0 etime=0
[30/Aug/2005:16:41:18 +0100] conn=299 op=162 msgId=164 - SRCH base="ou=clientdata,ou=infrastructure,o=northampton,dc=dataforc
e-dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(objectClass=ldapsubentry)))(o
bjectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscapeServer)(objectClass=netsca
peResource)(objectClass=domain))" attrs="dn"
[30/Aug/2005:16:41:18 +0100] conn=299 op=162 msgId=164 - RESULT err=0 tag=101 nentries=1 etime=0
[30/Aug/2005:16:41:18 +0100] conn=299 op=163 msgId=165 - ABANDON targetop=NOTFOUND msgid=164
[30/Aug/2005:16:41:20 +0100] conn=299 op=164 msgId=166 - SRCH base="ou=services,ou=infrastructure,o=northampton,dc=dataforce-
dev,dc=co,dc=uk" scope=1 filter="(|(objectClass=*)(objectClass=ldapsubentry))" attrs="objectClass numSubordinates ref aci"
[30/Aug/2005:16:41:20 +0100] conn=299 op=164 msgId=166 - RESULT err=0 tag=101 nentries=41 etime=0
[30/Aug/2005:16:41:28 +0100] conn=299 op=165 msgId=167 - SRCH base="ou=services,ou=infrastructure,o=northampton,dc=dataforce-
dev,dc=co,dc=uk" scope=0 filter="(|(objectClass=*)(objectClass=ldapsubentry))" attrs="objectClass numSubordinates ref aci"
[30/Aug/2005:16:41:28 +0100] conn=299 op=165 msgId=167 - RESULT err=0 tag=101 nentries=1 etime=0
[30/Aug/2005:16:41:28 +0100] conn=299 op=166 msgId=168 - SRCH base="ou=services,ou=infrastructure,o=northampton,dc=dataforce-
dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(objectClass=ldapsubentry)))(obj
ectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscapeServer)(objectClass=netscape
Resource)(objectClass=domain))" attrs="objectClass numSubordinates ref aci"
[30/Aug/2005:16:41:29 +0100] conn=299 op=166 msgId=168 - RESULT err=0 tag=101 nentries=41 etime=1
[30/Aug/2005:16:41:29 +0100] conn=299 op=167 msgId=169 - SRCH base="ou=iplanetamauthservice,ou=services,ou=infrastructure,o=n
orthampton,dc=dataforce-dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(objectC
lass=ldapsubentry)))(objectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscapeServ
er)(objectClass=netscapeResource)(objectClass=domain))" attrs="dn"
[30/Aug/2005:16:41:29 +0100] conn=299 op=167 msgId=169 - RESULT err=0 tag=101 nentries=1 etime=0
[30/Aug/2005:16:41:29 +0100] conn=299 op=168 msgId=170 - ABANDON targetop=NOTFOUND msgid=169
[30/Aug/2005:16:41:29 +0100] conn=299 op=169 msgId=171 - SRCH base="ou=iplanetamauthldapservice,ou=services,ou=infrastructure
,o=northampton,dc=dataforce-dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)(obj
ectClass=ldapsubentry)))(objectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=netscape
Server)(objectClass=netscapeResource)(objectClass=domain))" attrs="dn"
[30/Aug/2005:16:41:29 +0100] conn=299 op=169 msgId=171 - RESULT err=0 tag=101 nentries=1 etime=0
[30/Aug/2005:16:41:29 +0100] conn=299 op=170 msgId=172 - ABANDON targetop=NOTFOUND msgid=171
[30/Aug/2005:16:41:29 +0100] conn=299 op=171 msgId=173 - SRCH base="ou=iplanetampolicyconfigservice,ou=services,ou=infrastruc
ture,o=northampton,dc=dataforce-dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(objectClass=*)
(objectClass=ldapsubentry)))(objectClass=referral)(objectClass=organization)(objectClass=organizationalUnit)(objectClass=nets
capeServer)(objectClass=netscapeResource)(objectClass=domain))" attrs="dn"
[30/Aug/2005:16:41:29 +0100] conn=299 op=171 msgId=173 - RESULT err=0 tag=101 nentries=1 etime=0
[30/Aug/2005:16:41:29 +0100] conn=299 op=172 msgId=174 - ABANDON targetop=NOTFOUND msgid=173
[30/Aug/2005:16:41:29 +0100] conn=299 op=173 msgId=175 - SRCH base="ou=iplanetamauthenticationdomainconfigservice,ou=services
,ou=infrastructure,o=northampton,dc=dataforce-dev,dc=co,dc=uk" scope=1 filter="(|(&(numSubordinates=*)(numSubordinates>=1)(|(
--More--(83%)
The list goes on.
Can anyone give me any pointers?
Thanks

Hi
Thanks for your reply!
I did mis-type, my mistake - sorry about that.
If I dont over-ride the default it works, I've pretty much got the whole setup working now but I'm not particularly over the moon about the way the ldap tree is setup, I'd like finer granuality as we are going to attempt to get syncronization working with AD.
I have an idea about how I'd like to set up our Mail/Calendar/LDAP infrastructure the 2nd time around (I'm just testing at the mo) - so I might have a question or two for you if you dont mind taking a look when you have a minute?
Thanks Jay

In material master standerd cost value not updating in group currency

hi gurus
In material master accounting 1 tab, under price and values table. standerd price is not updating in group currency.
Can you sugest me how to resolve this issue
this hapend only for one material
can you sugest me to resolve this
regards
gangadhar

Hi,
As per My Knowledge,Wht ever currency is assigned as company code currency , tht will only be updated in Material Master as Per standard.
Currect me if Iam worng.
Thanks
Goutam

FBB1: group currency not been valuated

Similar Messages

Maybe you are looking for