FBCJ : header text of FI doc

Hi,
I've created a substitution, to substitute the header text of cash doc by the assignment field :
If BKPF-TCODE = FBCJ
substitute BKPF-BKTXT by BSEG-ZUONR
the problem is the system doesn't execute this substitution, I still have the business transaction as a header text !
I activate the trace in tcode GGB1 to show weather the system read correctly the substitution, and I find it OK, but when I save the Cash doc I still get the the business transaction as a header text !
Please how to resolve this ? the substitution seems work fine but when I save the doc I don't get the expected result !
Please advise
Regards.

Hi,
Please, read carefully note 546365 and check if your substitution is defined in compliance with the explanation posted there (point 4 in the note).
Regards,
Eli

Similar Messages

  • Billing Doc-Header-Texts copy Accounting Doc-Hader Texts?

    Dear gurus,
    I it possible to copy Billing Doc.-header- Text1 to
    Accounting Document>>>>>>"Doc. Header Text" field?

    Hello,
    the SAP note 301077 lists the available userexits in SD/FI interface.
    If, for example, you want to fill a BSEG field of customer line, userexit EXIT_SAPLV60B_002 is the good one.
    Instead if you want to fill a BSEG field of a G/L line, userexit EXIT_SAPLV60B_004 is the good one.
    Best regards,
    Ivano.

  • Printing of  header text msgof billing doc in Invoice.

    Hello  Gurus,
    Goodevening,
    I have requirement from client.
    This is the requirement  ,
    He will give the text  in billing docment header in billing document but  when takes the invoice the header text to be printed  in invoice.
    Is it possible ? looking for your inputs
    Thanks & Regards
    Venkat.
    Edited by: K.Venkata Chalapathi on Jul 15, 2010 5:08 PM

    Hiii
    Billing Header text can be print in your billing document, If it is developed smartform then you can take the help the ABAPer to print the text. For the same you have to create the text ID whichever you want to print in smart form then ABAPer will mapped the ID in his smartfrom on required place.
    Regards
    Shambhu Sarkar

  • Copy Mat. Doc Header Text to FI Doc. Header Text

    Dear Guru,
    Is there anyway to transfer the Material Document Header Text to the Accounting Document Header Text?
    I tried to use the FI Substitution, but somehow in the substitution exit, it just cannot get the material document number from there.
    Any help would be greatly appreciated! Thank you!
    Regards,
    Chris

    Hi Kenix, yes, that's what I mean. From the database record, I can see it actually works before.
    But not sure if it is because we upgraded from 4.6C to ECC6, this function is gone. Any advise?

  • BKPF-BKTXT (Doc header text source) for RV doc

    Does anyone know if the doc header text for RV doc can be maintained anywhere in the source SD doc, so that it can be transfered to the RV accounting doc?
    Thanks

    Does anyone know if the doc header text for RV doc can be maintained anywhere in the source SD doc, so that it can be transfered to the RV accounting doc?
    Thanks

  • Fill Doc Header Text in VL01N

    Hi,
    I made the delivery with transaction VL01N and of course it is generate a Material Document (mov type 601). if i try to change the material document i can change the field Doc Header text (mkpf-bktxt). So  my question is can i fill this field when i am making the Delivery in transaction VL01N?
    Thank you for your interest in my question
                     Best Regards
                                   João Fernandes

    Hi Joas,
    From your theard i could understand that you create a Delivery Note.
    Delivery consists of three parts like
    Picking, Packing and PGI( Post Goods Issue).
    If you do picking and Packing the then save the delivery and delivery Number get Generated,But it doesnt mean Complete Delivery unless you Do the PGI.Once you Do the PGI Only the Material Document will get Generated.Yes while creation of Delivery you can maintian the text you required.
    Hope this clarifies your doubt and Please Reward If Really Helpful,
    Thanks and Regards,
    Sateesh.Kandual

  • Word Doc Header Text Disappearing with Acrobat plugin

    Hi,
    I have a Word document with a header containing a graphic and text.  When I use the Acrobat plug-in to create a PDF, the text does not display in the PDF, only the graphic.  The graphic is a banner with text over it. 
    I have tried
    Putting the text in as normal header text, within a text box, and within a table. 
    Sending the graphic to back and the text to front in Word. 
    The Print to PDF feature creates the header perfectly with the text over the graphic.  However that feature does not allow me to create hyperlinks in the PDF for my table of contents, so is not the solution to my problem.  (And honestly is just making me more crazy knowing it CAN work!)
    An earlier version of this document did not have the same problem (I created a PDF from it several months ago, but recently updated the document - but not the header).  Now, when I open the January version of the doc and create a PDF, the header is missing the text.
    To my knowledge, I have not changed any settings in the Acrobat Plug-in Preferences or updated Word or the Acrobat plug-in since January.
    Does anyone have any insight into why this might happen?
    Thanks,
    Jane

    I was having the same issue on  a large document, and deleting the objects wasn't an option. I discovered that unchecking Enable Accessibility and Reflow with tagged Adobe PDF on the Settings tab of the Acrobat PDFMaker Preferences menu solved the problem. My text boxes with fill color now show both the color and the text. (I'm running Word 2010 and Acrobat 11 Pro.)
    I'm not sure I fully understand the functionality of the option I unchecked, but it does tag the document in the conversion process, which I prefer. But adding tags something that is easy to do once the document is created. If this is the best workaround, I'll take it, though it seems to be a bug in the Acrobat plug-in, since this didn't happen with the same document with the same settings previously. (I even tested on a Word document I have made no changes to and had created a PDF earlier. Sure enough, I recreated the behavior.)

  • Doc header text

    hi,
    may i know why there is no doc header text(bktxt) in selection screen or dynamic selection of FB03 or FBL3N?
    which tcode that displays fi document with the doc header text field in the selection screen?
    thanks
    rgds

    Hi,
    you can see in table level
    TCode SE16
    Table name BKPF :
    FI Document header details stored in this table like document number, document date, posting date, entry date, reference, header text, exchange rate, document type, etc.,
    For each document it will store only one entry in the table.
    This may update if any changes made in the document header like change in the header text / reference field.
    Other than the above fields, some other fields also get updated like document change date, document reversal details (document number, date reversed)etc.,
    SKS

  • Fbcj "document header text"

    hi experts.
    i am using "fbcj" transaction code but i need an information about "document header text" area .
    when i save a document with fbcj transaction , this document's "document header text" is always empty. i have to enter some numbers in this area before the save document. how can i fix it?

    Hi,
    Please refer this link :
    is it possible to configure the reference-document date as mandatory -FBCJ
    Regards,
    Pramitha.

  • F.80 Mass Reversal Using Doc. Header Text

    Is it possible to reverse multiple documents by searching off of Doc. Header Text in the F.80 transaction?  Its not there in the system I am using so I am wondering if there is an OSS note or configuration step to get this in?

    Hi Hari,
    As experts suggested you can go for enhancing the transaction with the Document Header Text.
    Else you can filter and download the documents with the header text from the table BKPF and field BKTXT - Header Text and i hope you got what you required.Use the filtered documents for reversing.
    Regards
    Andrew

  • Doc. Header Text (BKTXT) in MB1C

    Hello Experts,
    Requirement is to copy 501 mvt type into a new mvt type & for the new one, the field Doc. Header Text (BKTXT) should be made mandatory in MB1C t-code.
    1)Whether any configuration available to achieve the same?
    2)If it can be done through some enhancements, then whats the BADI/BAPI/Field Exit/User Exit available?
    Please suggest.
    Regards
    Mahesh

    Hi Mahesh,
    There is an enhancement point in form OK-CODE_PRUEFEN in MM07MF00 which could be used.
    ENHANCEMENT-POINT OK-CODE_PRUEFEN_01 SPOTS ES_SAPMM07M.
    If you put your check in here you should be able to get the desired result.
    For future use, if you debug from the point where you want the check to occur you can normally find the enhancement points, or, identify where you can create an enhancement using an implicit enhancement point.
    Regards,
    John

  • Where can I find the Billing Doc. Header Text SO10 text name?

    I have to write some logic in the billing document header text “country of origin”.
    VF02-- GOTO-- HEADER---HEADER TEXT----- COUNTRY OF ORIGIN.
    When a billing document is created it automatically creating the header text with the following details:
    Name :                       Billing doc number
    Language : EN
    Text ID:        ZD17
    Text object : VBBK.
    I need to find the SO10 text name from which the above dynamic text is generating, so that I can change the code in the original text..
    I searched in the SCN and found the Tcode VOTXN.
    I went to this tcode and selected the Billing Doc. Header Radio button.
    And I found the Access sequence number corresponding ID(ZD17-country of origin)
    When I gone through the sequence number I found one SO10 text name, but that is not the right SO10 name because the contents are totally deferrent.
    is there any way to find the SO10 text name, or did I went to any wrong path...
    please help me..
    Regards,
    Ramesh

    Double on the right hand side and Click on Goto-> Header for the Name and object details.

  • How to populate the Ser Entry ext key into the Doc Head text in ML81N Txn??

    Hello all,
    My requirement is to to populate the Service Entry external key into the Document Header text.
    ( ServiceEntry - ERS Invoice (MRRL) ). through ML81N Transaction.I have checked for exits in ML81N as well as MIRO. those doesn't seem very convincing.
    IF i see the field of Document header text where i need to populate the data it is
    ( BKPF-BKTXT ) how do i populate the data ( SE external field ) which is in ESSR table..?
    if any one has some piece of code please send it across.
    this is urgent pls help...........
    Any pointers for this would be highly appreciated.
    Thanks,
    Sreekanth...

    Please close this thread.Open new thread in forum [SAP Community Network Forums » ABAP Development » ABAP, General |;

  • How to display Header Texts that you find in Sales Order and Billing Doc..

    Hi,
    I am having some problems accessing the text that is typed in the Header Texts area of the Sales Order and Billing. To access the Header Text you should first trigger the Sales Order (VA02) then once in the Sales Order Click Goto -> Header -> Texts. The same follows to the Billing.
    I need to extract what is typed here on to a report. First of all I can’t figure out which table is used to save this information. I am suspecting that this information is encoded and stored in a table. To display this I may need to decode it.
    Is there some one who could help me to archive this please!!!
    Many Thanks,
    Kishan

    Hi Kishan,
    The texts you find in all SAP Object, like orders, invoice, materials, ... can be extract with FM 'READ_TEXT'.
    To know the parameters of the FM, you 'll have to go to the text ( in plain page mode ), then you do "GOTO" -> "HEADER", and a pop-up window opens with the parameters you need ( Text name, language, text id, text object ).
    The table "t_tdline" contains the entire text .
    CALL FUNCTION 'READ_TEXT'
      EXPORTING
    *   CLIENT                        = SY-MANDT
        id                            = w_id
        language                      = sy-langu
        name                          = w_name
        object                        = w_object
    *   ARCHIVE_HANDLE                = 0
    *   LOCAL_CAT                     = ' '
    * IMPORTING
    *   HEADER                        =
      tables
        lines                         = t_tdlines
    hope this helps.
    Erwan.

  • How to populate Doc Header Text Field & Ref Field in OASV Transaction?

    Hello everyone,
    I need to seek your help regarding, on how can I populate values in "Document Header Text Field" & "Reference Text Field" in OASV transaction, as these fields are invisible and are mandotory at document type.
    (I know we can disable their status in the document type, but we don't want to do so).
    Regards,
    Saurabh Patni

    Hi Mukthar,
    Thanks for the quick reply.
    I had tried to work out with substitution rule for the document type and transaction code, but still no use, the same error persists.
    (In Subsitution I am going with constant value to be replaced), I am defining it for Callup point 1, but it is not working.

Maybe you are looking for