Fbkp display accounting configuration spl gl list

hi gurus,
may i know why only can display D (customer). no way for me to choose vendor in fbkp.
i need to call obyr to display vendor acct type.
how to display acct type other than customer in fbkp for spl gl.
thanks

Hi
In FBKP once if you enter into Special GL press Page Down you can see Vendor Special GL indicators.
Regards
RS

Similar Messages

  • GL Account for Spl GL Indicator 'A'

    Hi,
    The users are trying to enter the downpayment in a Vendor's Account using the Spl GL Indicator 'A'. However, the system gives the error message -
    "No special GL Account defined for acct type K sp. G/L Ind. A recon acct 486000".
    To resolve the issue, the message displayed says - In system configuration enter a special GL account corresponding to reconciliation account 486000 for account type K and special G/L Indicator A.
    How to maintain the GL account for Spl GL Indicator A and thru which T Code?
    Your help would be highly appreciated.
    Thanks in advance.

    Hello Rajjul,
    Creation of special GL account is similar to creation of normal GL account (Tcode FS00). The special GL transaction is configured using tr. code OBYR (Vendor) & OBXR (Customer).
    Ex: if you want to do a special GL transaction for posting downpayment, you have to create a GL account by name 'Downpayment a/c.'. This is the special GL account. Now you have to go to OBYR and select the indicators K and A and click to go inside and first give your normal reconciliation account (vendors) and then the GL account number of the newly created 'downpayment a/c.' Once you save it, you can do the special GL transaction of Downpayment posting using the indicator 'A'. like wise you can create 'N' no. of gl indicators
    Thanks
    Para

  • C# - How to get the name of account (i have 3 accounts configured at Outlook) when I receive an email?

    At my Outlook 2013 I have 3 different accounts configured (two personal and 1 professional). When I receive an email at real time I need to know which account the mail is addressed, because I only want to work with the professional account!
    I use outlook.NewMailEx += new Microsoft.Office.Interop.Outlook.ApplicationEvents_11_NewMailExEventHandler(olApp_NewMailEx);   It is ok to get body, sender, subject
    but I cannot find the account name ! Example - my customer
    [email protected] sends one email for my account
    [email protected], and a friend sends an email to my personal account
    [email protected] At my application I want only to process the [email protected] and I cannot discover this account name on the mail received! thks

    Here is my code and what is strange, there are incoming mails (I see them at upper corner and at inboxes) with zero recipients, giving me the message below. So I will give up and change ,at Outlook accounts configuration ",display names"
    to the valid address names (ie Instead Manuel Costa I will put
    [email protected]), so I can use the mail.To property!
    private string GetSenderSMTPAddress(Outlook.MailItem mail)
                   string smtpAddress = "";
                   if (mail.Recipients.Count > 0)
                       string teste = OlMailRecipientType.olTo.ToString();
                       foreach (Outlook.Recipient recip in mail.Recipients)
                           Outlook.AddressEntry entry = recip.AddressEntry;
                           if (entry.Type == "EX")
                               smtpAddress = GetSMTPAddressViaOutlookObjectModel(entry);
                       return smtpAddress;
                   else
                       MessageBox.Show("no recipients");
                       return "";
    Thanks anyway Eugene

  • Display image in java.awt.List

    hello guys,
    How i can display image in java.awt.List means listbox. give me sample code. if you have
    Waiting for your favorable reply.
    Regards,
    Bhavesh Kharwa

    java.awt.List you can not.
    javax.swing.JLast you can.

  • Report to display accounting documents

    What is the report to display accounting documents
    Moderator: Please, avoid asking basic questions

    S_ALR_87012287 - Document Journal
    S_ALR_87012289 - Compact Document Journal

  • G/L account configuration about GR of PO about the third purshase process

    Hi Guys,
    I am not clear about the G/L account configuration when do the GR of PO. ( PO is converted from PR which is created automatically when the SO is saved). The account assignment category is 'E' (The acct modification is VAY,consumption posting is 'E', special stock is 'E', It is the same with the IDES system setup). But when I test the similiar case in our system and IDES syste,when I do the GR for the POs,I found that in our system, the Debit is posted to inventory account (The G/L setup in OBYC BSX),but in IDES,it is posted to consumption account (The G/L setup in OBYC GBB VAY). As I understand, If the PO is created with account assignment category, it should be posted to the G/L account which is setup in OBYC GBB,not the inventory account. Appreciate that anybody can tell me why they are different for the similiar cases? 
    Thanks in advance!

    Hi,
    Can you please refer to SAP note 458270, and check whether the material is valuated or non-valuated?
    For account assignment E, with special stock E, you need to check EKPO-KZBWS to identify
    whether it is valuated or not. If EKPO-KZBWS is initial, the posting will be non-valuated, thus GBB account will be used.
    Note  458270
    The system response is correct. In the case of valuated customer sales
    order stock, a material stock account is determined. Here, the data is
    derived via transaction/event key BSX. In the case of unvaluated
    customer sales order stock, on the other hand, a G/L account is
    determined by means of transaction/event key GBB.
    Hope it helps.
    Thanks and regards,
    Polly

  • Is it possible to display LOGO in simple ALV list?

    Hi Guys,
    Is it possible to display LOGO in simple ALV list. If yes plz explain in details.
    Thanks
    Sharat

    Yes it is possible to display logo at the top of the page.
    TYPE-POOLS: slis.
    *     Data Decalaration
    DATA: it_vbak TYPE TABLE OF vbak.
    DATA: g_repid TYPE sy-repid.
    DATA: it_listheader TYPE slis_t_listheader,
           wa_listheader TYPE slis_listheader.
    *     START-OF-SELECTION
    START-OF-SELECTION.
       g_repid = sy-repid.
       SELECT * FROM vbak INTO TABLE it_vbak.
       PERFORM build_alv_header.
       CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
         EXPORTING
           i_callback_program     = g_repid
           i_callback_top_of_page = 'TOP_OF_PAGE'
           i_structure_name       = 'vbak'
         TABLES
           t_outtab               = it_vbak.
    *&      Form  BUILD_ALV_HEADER
    FORM build_alv_header .
    *  Type H is used to display headers i.e. big font
       wa_listheader-typ  = 'H'.
       wa_listheader-info ='Flight Details'.
       APPEND wa_listheader TO it_listheader.
       CLEAR wa_listheader.
    *  Type S is used to display key and value pairs
       wa_listheader-typ = 'S'.
       APPEND wa_listheader TO it_listheader.
       CLEAR wa_listheader.
    *  Type A is used to display italic font
       wa_listheader-typ = 'A'.
       wa_listheader-key = 'Date    :' .
       wa_listheader-info ='SAP ALV Report'.
       APPEND wa_listheader TO it_listheader.
       CLEAR wa_listheader.
    ENDFORM.                    " BUILD_ALV_HEADER
    *&      Form  top_of_page
    FORM top_of_page.
       CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
         EXPORTING
           it_list_commentary = it_listheader
           i_logo         = 'PARI'.
    ENDFORM.                    "top_of_page

  • How display attachment links in a list view in SharePoint 2013?

    Hi all,
    I'm looking for a way to display attachment links in a list in SharePoint 2013. There are few resources online to achieve this in SP2010 and SP07. Your help is much appreciated.
    Thank you.

    Hi Ram Sampath:
    You can use Event Receiver and create another list(ListA) to record your attachment link.
    Maybe your process is:
    Users add list items and attachments
    List event will be fired
    Use Event Receiver to get attachment url and then Write into ListA
    You also can refer to the following web site:
    https://social.technet.microsoft.com/Forums/sharepoint/en-US/b693eb84-b846-4f0f-93c1-276cf931c746/how-to-get-attachment-in-itemadded-event-receiver
    http://stackoverflow.com/questions/19077770/how-to-retrieve-list-item-attachments-with-sharepoint-2013-event-receiver-in-cor

  • Custom field in Account Master Data Tcode BCA_CN_ACCT_03 - Display Account

    Hi all,
    I want to add a custom field in Basic Data tab of display account screen : Tcode BCA_CN_ACCT_03. 
    Please give step-by-step solution.
    Points assured!
    Jogdand M B
    Edited by: Jogdand M B on May 19, 2008 5:36 PM

    Solved by myself
    I write here the response because I didn't found it anywhere:
    When you are adding a custom field to MAKT table you have to add it to appending structres SKTEXT and DMAKT too because the standard uses them to read/write the data to MAKT. It's easy to do but hard to find out

  • How to display the count of a list item in Sharepoint Designer?

    How to display the count of a list item in Sharepoint Designer? please reply with the proper code line to add for this.

    Hello,
    What version of sharepoint you are using? Try below approach:
    http://sharepointlogics.com/2010/03/total-count-of-items-in-list-in.html
    Hope it could help
    Hemendra: "Yesterday is just a memory,Tomorrow we may never see"
    Whenever you see a reply and if you think is helpful, click "Vote As Helpful"! And whenever
    you see a reply being an answer to the question of the thread, click "Mark As Answer
    Please feel free to unmark answer if does not resolves your problem.

  • HP Photosmart Plus B210a all-in-one won't display any networks in the list.

    Hi, I recently purchased a HP Photosmart Plus all in one printer and I've been having trouble with it from day one.
    First off, it won't connect wirelessly.
    It won't display any networks in the list when searched for, it won't take my network details when I manually input them and it won't take any static IP address I've tried from other suggestions.
    Secondly, the print quality is very bad. Streaks and fading are occuring and after using up 70% of my ink trying to sort it out through troubleshooting it's still bad.
    It's extremely important for me to be able to have web access using the printer as all members of my household use it and it'll get fustrating having to car laptops and computers around to print.
    Can anybody help at all?

    Top line says "The wireless radio is not functioning. Contact HP support"
    I take this as a very bad sign and needs replacing?
    The tests I done produce streaks, fading and lines. I printed off two photos, one from a memory card and one from a scan. The memory card produced heavy blocked lines of color and the scan was just dull.
    I'm using a Wanadoo Wireless Livebox and Windows 7 64 Bit
    One other question... is this like a brilliant printer for photos mainly? I'm a Graphics design student and although my final prints are made from home I would like accurate and decent printouts for my portfolios. Should I keep this or go for another one with similar features and better print quality?

  • How to display accounting periods in a fiscal year?

    hi gurus,
    could you please tell me how to display accounting wise calculations like AP1, AP2 ... AP12 in a given fiscal year in Bex (BI7.0)?
    please tell me the logic?
    regards

    You can create them
    Non calender year
    Non Year dependent
    Number of Periods 16, Special Periods XX (based on your requirement)
    Use -1 or +1 year shift based on your requirement.
    However, your requirement is wrong. December month is overlapping in both the years. Please recheck.
    Regards,
    Ravi

  • Group Account Configuration - OBIA 11.1.1.7.1

    Hello,
    I am setting up Financial Analytics OBIA 11.1.1.7.1, have following questions regarding group account code setup
    1. Should we always use Natural Account Segment for mapping to Group Account Codes? I could see a customer is using different segment (Sub Account) to classify their accounts to various categories. Should we use combination of Natural Account and Sub Account to classify them in to various Oracle supplied group account numbers?
    2.If i have to go with multiple segments for group account configuration, i could n't see a technical note from oracle support for OBIA 11.1.1.7.1 where ETL tool is ODI. Can we customize ODI using the technote available for Informatica based OBIA 7964 tech note? Are there any changes to apply on top of it?
    Thanks
    Venkat G

    Hi,
    Thanks for reply. We've multiple COAs(Three Companies with seperate COA) Also with in one COA natural Account is dependend on Sub GL Segment and Cost Center. In "file_group_acct_codes_ora" file we only map Natural Accounts.Now if we map only Natural Accounts to Group Account Number it will pull all data. e.g. Natural Account 123,Cost Center A and Sub GL Account 1 should be mapped to Cash. if we map 123 to Cash it will pull all data for all Sub GL Accounts and Cost Centers. Please let me know if you need more clarification.
    Regards
    mzai

  • Problem while displaying top of page in list display

    Hi,
    M facing problem in displaying top of page in list .
    M using following methods:-
    lr_outer_grid TYPE REF TO cl_salv_form_layout_grid,
    lr_inner_grid TYPE REF TO cl_salv_form_layout_grid,
    lr_label TYPE REF TO cl_salv_form_label,
    lr_text TYPE REF TO cl_salv_form_text.
    For displaying the top of page m using event TOP_OF_PAGE.
      CREATE OBJECT lr_outer_grid.
    *Outer grid
      lr_inner_grid = lr_outer_grid->create_grid(
      row = 1
      column = 1 ).
    *... create lable information in inner_grid
    User ID
      lr_label = lr_inner_grid->create_label(
      row = 1
      column = 1
      text = text-h03 ).
    *... create text information in inner_grid
      lr_text = lr_inner_grid->create_text(
      row = 1
      column = 2
      text = sy-uname ).
    *... set label for text
      lr_label->set_label_for( lr_text ).
    But while m going to do same coding for second parameter its not intializing length so adding extra spaces while displaying second row.
    e.g
    USERID       abcdefghjik
    PLANT         jhk            to hjk
    I want that output should look like
    USERID      abcdefghjik
    PLANT        jhk to hjk
    Please tell me the solution what should i do for avoiding extra space

    Hi Neelema,
    You could try this sample code.
    [http://sap-img.com/fu037.htm]
    [http://sap-img.com/abap/sample-alv-heading-in-alv.htm]
    Regards,
    Amit.

  • How do you change the fields that are displayed on the email preview list after a search?

    How do you modify the fields that are displayed in the mail preview list in the center column of Mac mail after you conduct a search of your email?   All of a sudden the displayed fields changed on me whenever I do a search in mail.   When I have not filtered my email with a search, the default field shown in bold at the top of each message's preview is the "From" field.   However, when I do a search this changes to the "To" field.   Can anyone help?   Thanks, ccarey

    ipicus
    But why would you want this?
    iTunes is responsible for the File Management, let it get on with it, you do your organisation in the iTunes window. And everything you need to do, you can do via the iTunes Window. Want to find the file of a track quickly? Right click on it in the iTunes Window and select Show File: A finder window pops open with the file already selected.
    Regards
    TD

Maybe you are looking for