FBL1N & FBL5N shows amounts in thousands
Hi experts
FBL1N & FBL5N shows amounts in thousands 14,50080 $ instead of a normal display 14 500,80 $
Can anyone help to resolve this problem.
Thanks
Hi
Also make sure that you log off and log in back after the change of amount format.
Regards
Paul
Edited by: Paul01 on Dec 6, 2010 2:52 PM
Similar Messages
-
FBL1N/FBL5N - Display of Material
Hi All
We want to display material in vendor/customer line item (FBL1N/FBL5N). We have already activated material by T Code OBVU. But still system is not showing material in customer/vendor line items.
Regards
Rajesh Guptahi rajesh,
After Executing the Tcode FBL5N, on the top of the screen you can see the option for the SET FILTER or press CTRLSHFTF2, so that you can see the window popups...
On the right side of the screen you can see the list of the Field List from the right side of the screen select the MATERIAL and transfer it fo the left side of the screen and then Click on COPY as....
The next screen you have to enter the MAterial number and click on the Continue button.....
Now Save this Variant and every time when u execute the FBL5N you have to select the same Variant, so that you can also see the maternal number.....
Hope this will solve your problem....
Ranjit Kumar....... -
Offsetting account in FBL1N & FBL5N
Dear All,
In FBL1N & FBL5N reports OFFSETTING ACCOUNT is showing as * mark instead of showing its GL account.
What could be the reason?
Kindly help me on this.
Regards,
YadayyaHi, check treat Re: FBL3N - choose the shown offset account
-
F.07 bal dif from bal in fbl1n/fbl5n
hi
When I run the F.07 in test mode and compare the bal in fbl1n/fbl5n ( open items 31.12.2008 and normal items) are not matching why
thanks in advanceAccording to SAP the execution of the balance carry forward programs represents the closure of the year. The G/L balance carry forward program does not make any postings. It calculates the net operating profit to the Retained Earnings Account and transfers the balances to period 0 of the next fiscal year. For countries that need to do closing and opening postings (hard closure) SAP provides the program RFSUMB00 (or if the new General Ledger is in use program FAGL_YEC_POSTINGS.
You need to follow the below order.
1 Start with GL balance carry forward (F.16)
2 Run the RFSUMB00 or FAGL_YEC_POSTINGS (this is used if new GL is activated)
3 Run balance carry forward for Customers & Vendors (F.07) -
Currency option in fbl1n/fbl5n/fk10n/fd10n
Hi
i am posting doucment in local currency as well as in USD and EUR in my vendor and customer account. but in FBL1N / FBL5N/ FD10N/ FK10N i am ONLY able to view the statement in local currency. wheras i want to view only those transaction which are posted into USD or EUR.
how to get currency tab in above report or how to view above TC in USD or EUR
please replyhi
Thanks for immediate response. but in fk10n or fd10n we generally get currency selection option by default. why this is not appearing in my current system does not understand.
i am in ECC6.0 with enhancement patch 3. do we need to apply note to get currency option in above T code.
please shere your experience.
Regards
DD -
Error while showing amount field in Bex Analyzer
Hi
when i tried to execut query in BEx analyzer for field DMBE2 (local currency) its showing amount follwed by ERROR
ex: 32,54,000ERROR. How can i resolve it?>
Pravender wrote:
> If you do not want to display currency then create a formula of calculated key figure and use NODIM() data function. It will remove ERROR.
Will the use of NODIM() take effect for all data and not display the currency?
Is it possible to not display currency only where no value for currency is available? That means that datasets where currency is availalbe will show for example:
1000 EUR
2000 USD
3000
4000
5000 EUR
6000 RMB
7000
8000 EUR -
i set up my email account with ntlworld can somebody please help me why it keeps downloading emails i have deleted from about 4 years ago amounting to thousands of emails. thanks
Hi, is this POP or IMAP?
In Mail Preferences>Accounts>Mailbox Behaviors, what are settings for remove from server & such? -
Issue: - FBL1N - is showing wrong values
Issue: - FBL1N - is showing wrong values
Hi SAP experts,
We are executing T Code FBL1N and selecting all open enteries, and select all items like special normal items, G/L Transaction, noted items, parked items and customer items, we found that the balance is showing wrong for intercompany vendors.
For Ex, if vendor is not created in company Code A and customer items are available in Company Code A then that items are coming for some line items and for some line items it is not?
I have attached one example for the same. for all vendors data is coming properly but for indivisual vendor is it not.
Please suggest why?
Regards,
VijayExample :
Vendor number 99 ans for the same customer nO is C12 is created in company code ABC but vendor is not created and customer C12 is in PQR, now i am executing fbl1n for Company Code PQR for open item selecting all options like normal items, special G/L transaction, customer items noted items and parked items, the line items related to Vendor number 99 for company Code PQR should not display, as vendor is not created but customer items are there, please let me know for some cases it is showing result and in same cases it is not why?
Regards,
Vijay -
I understand this part but once it shows amount in my account why can I not use that amount shown to gift music?
Apple doesn't allow that. They've never said why.
(96758) -
Quantity showing zero using T.Code FBL1N & FBL5N
Hi All,
Quantity showing ZERO using T.Code FBL5N & FBL1N.
Please help.
Thanks & Regards
Ritu VermaHi,
You can use Business Transaction Event 00001650 in FIBF transaction to fill the quantity field with the value from the required table. You can do this with the help of your ABAPer
Also go through the below thread to have an idea on how to code:-
Re: Vendor & Customers in FBL3N
Regards,
Gaurav -
Profit centre in fbl1n & fbl5n
Hi,
In case of vendor or customer line item display, the profit centre is not showing.
We have implemented GL Profit Centre concept rather than Business area concept. But now the question is when the client is asking any report on area wise vendor or customer detail in line item display, its not showing any profit centre. I can check the individual line item & in GL View i can see the profit centre in creditors a/c which is a GL A/c.so kindly reply asap.
Thanks in adavance.....
regds,
RajHi Raj,
For our client also we had the same requirement. Through ABAP Business Transaction event, we made the profit center field available for FBL5N/FBL1N. Take the help of your ABAPer to get this done.
Thanks & Regards,
Sajan Pishrody -
MIRO Not Shows Amount In Local Currency
HI
My Service PO is in USD. Goods Receipt is Alos Posted in USD. But at the Time of MIRO when i simulate the Transaction and Check the Document in Local Currency System Do not show me INR amount in Vendor Item. It Shows Zero Balance. Due to this I am not able to Post Invoice. Please Guide.
MannYes i am Verifying the same note It is really good. But My PO is not Material PO it is Text PO for Services. It Still Not Correct my issue.
Mann
Edited by: Mann J on Jul 28, 2011 11:55 AM -
Need profit center in Vendor & customer Line items in reports FBL1N & FBL5N
Hi,
how to get profit center field in reports FBL1N and FBL5N. Please help.
Regards,
Sumit Jain
Moderator: Please, search SDN; it has been answered several timesHi,
I have done the below to get this. (You can change the naming convention of function module as per your wish):-
Step 1:-
Create function module Z_GET_PRCTR as below:-
Import:-
BELNR LIKE BKPF-BELNR
BUKRS LIKE BKPF-BUKRS
BUZEI LIKE BSEG-BUZEI
GJAHR LIKE BKPF-GJAHR
Export:-
PRCTR LIKE BSEG-PRCTR
FUNCTION Z_GET_PRCTR.
""Local Interface:
*" IMPORTING
*" VALUE(BELNR) LIKE BKPF-BELNR
*" VALUE(BUKRS) LIKE BKPF-BUKRS
*" VALUE(BUZEI) LIKE BSEG-BUZEI
*" VALUE(GJAHR) LIKE BKPF-GJAHR
*" EXPORTING
*" VALUE(PRCTR) LIKE BSEG-PRCTR
DATA: ZDOCLN LIKE FAGLFLEXA-DOCLN.
CONCATENATE '000' BUZEI INTO ZDOCLN.
SELECT SINGLE PRCTR FROM FAGLFLEXA INTO PRCTR WHERE RYEAR = GJAHR
AND DOCNR = BELNR
AND RLDNR = 'NL'
AND RBUKRS = BUKRS
AND DOCLN = ZDOCLN.
CLEAR ZDOCLN.
ENDFUNCTION.
Step 2:-
Then create the Function Modules as below:-
Z_LINE_ITEMS_GET_PRCTR (Copy of SAMPLE_INTERFACE_00001650)
FUNCTION Module Z_LINE_ITEMS_GET_PRCTR.
""Local Interface:
*" IMPORTING
*" VALUE(I_POSTAB) LIKE RFPOS STRUCTURE RFPOS
*" EXPORTING
*" VALUE(E_POSTAB) LIKE RFPOS STRUCTURE RFPOS
Initialize Output by using the following line -
E_POSTAB = I_POSTAB.
E_POSTAB = I_POSTAB. "<-- important
IF I_POSTAB-PRCTR EQ SPACE.
CALL FUNCTION 'Z_GET_PRCTR'
EXPORTING
BELNR = I_POSTAB-BELNR
BUKRS = I_POSTAB-BUKRS
BUZEI = I_POSTAB-BUZEI
GJAHR = I_POSTAB-GJAHR
IMPORTING
PRCTR = E_POSTAB-PRCTR
EXCEPTIONS
OTHERS = 1.
ENDIF.
ENDFUNCTION.
Step3:-
Transaction FIBF:-
Settings -> Products -> of a Customer
PRCTR Profit Center in Line Item Display Active
Settings -> P/S Module -> of a Customer
00001650 PRCTR Z_LINE_ITEMS_GET_PRCTR
Step 4:-
Create the layout for FBL*N with display of the profit center.
Regards,
Gaurav -
How do I get macmail to show amount of emails in my INBOX, as it used to do?
I use macmail and with my INBOX, there used to be a total count of emails in there in parentheses after INBOX. I still have the amount listed in the sent, trash, delete sections, but it is not appearing after INBOX. How do I get it to once again show the amount of emails?
Double tap above the INBOX or ALL INBOXES and the list will advance automatically to the most recent email or the top of the email list.
-
User Name field in fbl3n, fbl1n, fbl5n
Hello,
How should i add user name field in fbl5n / fbl3n / fbl1n?
Thankshi,
215798 FBL*N: Special fields are not displayed
Have you done the following :
In the Line item Display list in FBL3N follow this menu path: Settings
-> Special fields, and add field BKPF-USNAM from table BKPF.
The field is later available for display,and you can choose it from
the Line item Display list following this menu: Settings -> Display
variant -> Current. From the hidden list you can now choose the field.
If the technical name is shown for the fields, the special fields are
are all starting with '1-U_'. It's important, that you add the Special
field, if the field also exist as Standard field. The Special fields
are shown in the buttom of the Hiddden list.
Please still remember step 2 and 3 from note 215798.
reg
Madhu M
Maybe you are looking for
-
How to get an option to create a page type as "Report and Form"
Hi, When creating a new application, APEX 2.1 gives an option to select a page type as "Report and Form". Once we have already created an application, how to get the same option? Thanks, Hozy
-
Hi, The Stored Procedure is given below. CREATE OR REPLACE PROCEDURE CF_1 ( P_USER_TYPE IN VARCHAR2, P_RPT_LEVEL IN NUMBER, P_PARNT_GROP IN VARCHAR2, P_RPT_TITLE IN VARCHAR2, P_Ret_Val OUT VARCHAR2 ) IS P_Return_Value VARCHAR2(200); BEGIN IF P_U
-
How can I get a flash based plugin to load in CC 10.x
Hello How can i get a flash based creative suite plugin to load in Indesign CC 10.x? I can get It to load in CC, but not In CC 10.x. Im using Flashbuilder 4.5. Do I need a newer version of flash builder/extension builder? Best regards / Pontus
-
I like a lot the new beta version Tagged for Android. Make these new options and this new design and into hi5 mobile app, and hi5/Tagged web site. Would be cool! I think the Tagged team work for make this. I love Tagged! A good idea is to improve the
-
Good afternoon, I have been doing quite well with my webpage and learning new things each day. I have files on my desktop which I work on and then upload to a server that holds my website. It seems I keep finding the files on the server side are gett