FBL1N not picking up customer itesm

Hi Guru,
could you please share your expeirence is such issue where we are running FBL1N, Vendor line item report with selection creterion for Customer Lines apart from Normal items.
Normally system picks up Vendor line items and also customer line items, if customer and vendor are linked to each other. but in a particular case system is not picking up customer lines, its only showing vedor lines. Also when I run FBL5N for customer which is linked to same vendor where there is a problem, system work correctly and it shows customer lines as well as vendor lines.
It would be great if you can suggest your idesa as to why system is behaving in such a way.
Thanks & regards,

Hello,
You might check if there is some archived information. Select the option
"Data Sources" and setting the flag for the "Archive" data.
Best Regards

Similar Messages

Profit Centre not picking in customer and vendor line items

Hello
When we are posting the entries for customer and vendors and when i want to check the balances of customers & Vendors profit center wise it is not showing any balance but if i will check the same transaction in the P & L A/C it shows me the balance there Profit Center Wise
Can we please tell me where i have to maintain the settings so that i can get the balances of customers and vendors Profit Center Wise
Sunil

Hello,
Unless you are on New GL with document splitting functionality, no items on vendor and customer will be posted with Profit Center.
You run 1KEK periodically to transfer the receivables and payables to PCA.
Regards,
Ravi

F.07 does not pick correct customer balance

I have two customer accounts for which upon running the transaction F.07 ,in test mode , it is returning the cumulative balance from last year( the top line in FD10N) . But in our test system , it is giving the correct balance . Test system was refreshed before year-end.
Why is it not returning this year's balance in Production?
Thanks
Edited by: MN on Feb 7, 2010 8:33 PM

Hi,
check for any authorization issues.
Regards

FAGLL03, FS10N (Layout), FBL3N Customer No not Pick

Dear All,
when my user go for GL line item level through FAGLL03, FS10N (Layout), FBL3N customer no not picking line layout
In that perticuler GL account Sort key also assign Customer no but line layout cutomer field is there but not pick the customer no
Pl help this issue
Regards
KSP

Hi:
I again assert the same thing..No matter what you maintained in sort key field like PO numbers, vendor or customer numbers can be fetched in reports in FBL3N, FAGLL03 or FS10N line items.. Reason i quoted above..However you have an option to fetch this field using Business transaction event 1650 using FIBF..Your ABAPER will need to modify structures and then modify the contents..Please check it with your ABAPER , i am sure you will get your issue resolved..
Regards

Custom Manage Property does not pick up the value from mapping crawl property

Hi All,
I have created a custom list with the column name that's called "category".
Then I ran full crawl and I saw the "ows_category" crawl property is created.
Then I create the manage property names as "Category" and map with the "ows_category" and run the full crawl again. (Retrivable, Searchable, Refinable options are checked)
After full crawl, I searched Category:keyword but it returned 0 result.
But when I search keyword, that list item is retuned
I tried to debug with the spsearch2013 tool and there is no "Category" manage property in the return XML.
It seems the Manage Property does not pick up value from the crawl property. (Something might be wrong with the index schema)
Do you have any suggestion?
Do I need to reset the index?
Best Regards,
Andy

Hi Andy,
When you search ‘category’ in crawled properties(Central Administration->Search Service Application->Search Schema), you will see ows_Category is mapped to DiscussionCategory, like the screenshot:
So, I suggest you create a new column using another name, then test again, compare the result.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Customer document number not picked while making payment

Hi guys
we have one vendor the same vendor as customer also. while we making payment to vendor customer document document number not picked,, the erro message comes.. " NO APPROPRIATE LINE ITEM IS CONTAINED IN THE DOCUMENT"
But we already assigned the following:-
1) In Vendor master data, Customer code has been given
2) In Documnet type KZ, we select vendor also.
But still the customer document not picked while making payment
Pl Help me out.
Regards
K.Gururajan

Hi,
Check the following:
1. The check box clearing with customer and clearing with vendor has been selected in both the masters in the payment transactions tab.
2. Ensure the vendor is not locked up in any payment proposal in F110.
Thanks
Aravind

Customer number not picked up

Hi Friends,
i have created a 3rd party sales order, as you are all aware the purchase requisistion gets automatically created in the back ground, now if i go and the PR to my suprise there is no customer which should be present in delivery address tab, instead of that adress number of that customer has picked up.
please be aware sold to party and ship to party are different.
earlier the customer was reflecting in PR under delivery address tab and now suddenly this is not picked up.
kinldy let me know what needs to be checked for customer number vanishing.
regards
Prasadnaidu

Hi PrasadNaidu
I agree with navneetha comments also. Please check the configuration ,and also Please check the other documents which has been created with the same data. If old documents data is coming correctly then kindly debug then only you know what is the issue also. so kindly take the Technical team help
Thanks and Regards
Srinath

SAP web AS not picking up my custom actions defined jar

Hi,
I added some custom actions in the config.xml of the SAP Internet Sales Application, but noticed that this server is not picking up the jar file in which I defined my custom actions. This happens even though I placed the jar file directly under the WEB-INF/lib folder.
When I go through the logs, I see that under the resources, it picked up all the jars except mine. Is there a place where you define what jars to pick up with in the WEB-INF/lib folder.
Thanks
SK

Oh yes, there is.
In NetWeaver never place any files into directories and expect them to work. You MUST deloy them regularly.
On every start the server checks the files against what is in the DB and I don't know what it does in case of no file in DB, but it may even delete it...
Regards,
Benny

Receiving Open Interface not picking Inter-Org records from Interface

Hi,
I am trying to receive the inter org transfer through the Receiving Open interface, but the interface not picking the data from the interface tables (RCV_HEADERS_INTERFACE, RCV_TRANSACTION_INTERFACE).
I am in 11.5.10.2, all the sources worked fine like Vendor, Internal Order, Customer but the issue is with the Inventory source (inter orgs)
Please could you advise what could be the reason for the interface for not picking the Inventory source data from the interface table.
Below are the interface insert script that am using..
INSERT INTO RCV_HEADERS_INTERFACE
(HEADER_INTERFACE_ID,
GROUP_ID,
PROCESSING_STATUS_CODE,
RECEIPT_SOURCE_CODE,
TRANSACTION_TYPE,
AUTO_TRANSACT_CODE,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
LAST_UPDATE_LOGIN,
CREATION_DATE,
CREATED_BY,
SHIPMENT_NUM,
RECEIPT_HEADER_ID,
SHIP_TO_ORGANIZATION_ID,
EXPECTED_RECEIPT_DATE,
EMPLOYEE_ID,
VALIDATION_FLAG
VALUES
(rcv_headers_interface_s.nextval , --Header_Interface_Id
rcv_interface_groups_s.nextval, --Group_Id
'PENDING', --Processing_Status_Code
'INVENTORY', --Receipt_Source_Code
'RECEIVE', --Transaction_Type
'DELIVER', --Auto_Transact_Code
SYSDATE, --Last_Update_Date
-1, --Last_Updated_By
-1, --Last_Update_Login
SYSDATE, --Creation_Date
-1, --Created_By
'ICR-001', --SHIPMENT_NUM
21073573, --RECEIPT_HEADER_ID
2266, -- SHIP_TO_ORGANIZATION_ID
SYSDATE+1, --Expected_Receipt_Date
5543, --Employee_Id,
'Y' --Validation_Flag
INSERT INTO RCV_TRANSACTIONS_INTERFACE
(INTERFACE_TRANSACTION_ID,
GROUP_ID,
LAST_UPDATE_DATE,
LAST_UPDATED_BY,
CREATION_DATE,
CREATED_BY,
LAST_UPDATE_LOGIN,
TRANSACTION_TYPE,
TRANSACTION_DATE,
PROCESSING_STATUS_CODE,
PROCESSING_MODE_CODE,
TRANSACTION_STATUS_CODE,
CATEGORY_ID,
QUANTITY,
UNIT_OF_MEASURE,
ITEM_ID,
AUTO_TRANSACT_CODE,
SHIPMENT_HEADER_ID,
SHIPMENT_LINE_ID,
SHIP_TO_LOCATION_ID,
RECEIPT_SOURCE_CODE,
TO_ORGANIZATION_ID,
DESTINATION_TYPE_CODE,
DELIVER_TO_PERSON_ID,
LOCATION_ID,
DELIVER_TO_LOCATION_ID,
SUBINVENTORY,
LOCATOR_ID,
HEADER_INTERFACE_ID,
VALIDATION_FLAG,
SHIPPED_DATE
--SELECT
VALUES
rcv_transactions_interface_s.nextval, --Interface_Transaction_id
rcv_interface_groups_s.currval, --Group_id
SYSDATE, --Last_update_date
-1, --Last_updated_by
SYSDATE, --Creation_date
-1, --Created_by
-1, --Last_update_login
'RECEIVE', --TRANSACTION_TYPE_RECEIVE
SYSDATE, --TRANSACTION_DATE
'PENDING', --PROCESSING_STATUS_CODE
'BATCH', --PROCESSING_MODE_CODE
'PENDING', --TRANSACTION_STATUS_CODE
203, -- CATEGORY_ID
20, --QUANTITY
'EACH', --UNIT_OF_MEASURE
4379131, --ITEM_ID
'DELIVER', --AUTO_TRANSACT_CODE
21073573, --SHIPMENT_HEADER_ID
16566939, --SHIPMENT_LINE_ID
101629781, --SHIP_TO_LOCATION_ID
'INVENTORY', --RECEIPT_SOURCE_CODE
2266, --TO_ORGANIZATION_ID
'INVENTORY', --DESTINATION_TYPE_CODE
13706, --DELIVER_TO_PERSON_ID
101629781, --LOCATION_ID
101629781, --DELIVER_TO_LOCATION_ID
'FG', --SUBINVENTORY
46259, --LOCATOR_ID
rcv_headers_interface_s.currval, --Header_interface_id
'Y', --VALIDATION_FLAG
SYSDATE
Thank you,
Genoo
Edited by: Geno on May 25, 2013 4:54 AM

Any suggestion/advise please!
Thanks,
Genoo

Excise duty is not picking up for a business area

Hi,
please help me ,The problem is
while creating invoice it is found that exice duty is not picked up by the system for that invoice for a particular business area , so please suggest what setting has to be checked to rectify the error.Is
Thanks
Ahsan

Excise Duty will flow based on your plant and CIN settings and not based on your business area. So first check in your sale order / billing document whether plant is flowing.
If you are in TAXINJ, ensure that you have maintained both the customer code and material code in J1ID. If you are in TAXINN, ensure that the relevant tax code with that ED condition type is maintained in FV11
thanks
G. Lakshmipathi

Query is not picking the data from multiprovider

Hi All,
i have defined a query on a multiprovider which is made up of three ods one from sales orders, delivery, and billing but when i run the query ...its not picking up order quantity for some sales orders and also its not picking all the items available for that orders...but for some orders its picking up the order quantity but not delivery quantity...
order quantity is coming from sales orders ods and delivery quantity is coming form delivery ods, billing quantity is coming from billing ods...can somebody help me with a suggestion like what could be ther problem...
any sugestions will be highly appreciated.
with regards
harish

dear Harish,
multiprovider works as union,
you have order, delivery, billing, e.g the data like
order
orderno orditem customer product ordqty
ORD001 1       a        x        10
ORD001 2       a        y        20
ORD002 1       b        x        30
delivery
delvno delvitem customer product delvqty
DLV001 1       a        x        8
DLV002 1       b        x        25
billing
billno billitem customer product billqty
BIL001 1       a        x        8
multiprovider
orderno-orditem-delvno-delvitem-billno-billitem-customer- product-ordqty-delvqty-billqty
ORD001 1   blank blank blank blank    a        x        10 blank blank
ORD001 2   blank blank blank blank     a        y        20 blank blank
ORD002 1   blank blank blank blank    b        x        30 blank blank
blank blank DLV001 1 blank blank      a        x        8
blank blank DLV002 1 blank blank      b        x        blank 25 blank
blank blank blank blank BIL001 1       a        x        blank blank 8
what can you do is remove order no, order item, delivery no, delivery item, billing no, and billing item from query row area.
hope this helps.

Due date for BoEx is not picked up by payment programme RFFOF_V??

Hi!
I would be most grateful for your help/advise on my problem;
I have a French customer for which I have set up BoEx with payment method 4 -LCR non accepté with payment programme RFFOF_V, as it is compliant with the bank's file specification "AFB-CONFB pour le virement et prelevement par fichiers".
File is generated according to bank file specification (and accepted by bank), but I am having problems with the due date of BoEx since it is not picked up by payment programme when running trx F110. Instead issue date is picked up by file.
What do I need to do/change in order for file to pick up BoEx due date instead of issue date?
It should be possible to run F110 and group items so that file picks up information on due date instead of issue date so that bank does not withdraw money from customer bank account before BoEx due date..or??
At least it was possible for payment method 2 LCR magnétique and payment method 4 does not seem that different.
Ex.
Trx: F110
Posting date: 2014.04.08
Docs entered up to: 2014.04.08
Customer items due by: 2014.04.30
Pmt method:4
Next pmt: 20140501
B.ex/pmt request > Issue date=2014.04.08
B.ex/pmt request>Items Due by=2014.04.30
B.ex/pmt request>Incoming pmt due by=2014.04.30
Config settings for paying company code:
Bill/exch pymt: X
One bill of exch. per due date period: X
Latest due date in: 90 days
Bill on demand for due date up until:- (blank)
Payment method 4: Create BoEX before due date.
Any information that could help me resolve my problem is highly appreciated.
Kind regards
Linda

Dear Ramana,
I am really thank to you for your kind answer.
With your guidence, i could able to solve this problem, but i would ask you one question.
Why this sales order is not updated in VEPVG table? Does the data in this table will archieve after some time. if yes what is that particular time.
Onemore thing, my understanding on delivery due list VL10C, that system will not pick those sales order for which the delivery date is older than one month. i,e if the sales order in created in the month of september and has the delivery date as 29.08.2010 then system will not pick up this sales order.
Please correct me if my understanding is wrong.
Once again i am really thank you for your great help.
Warm Regards,
Sridhar Burugula

Gross Price is not picked up upon creation of a requisition from a network!

Hi gurus,
I would like to seek for help, actually problem is related in SD but I pose this thread here because it is related in debugging issue.
do you know about "perform ROW_OUT " function? we have a bug that is very rare, when user select gross type with figures (ei. 1000, or any number).. system will not pick up the value instead it will be default in ZERO, but when user try to select again it output the correct expected result,,I debug it a dozen times but i cant catch the zero issue, *(-creating watch point wherein TBTWR = 0 and TBTWR <> 0 and the last point of intersection is in row_out sunction and MOVE-CORRESPONDING IX_ESLL to: ESLL) /* Is there someone OF you encountered this ?? if theres one please give some insight on how you pin point the problem in system .. note: all related program and process here is all standard (No custom program involve)..
Cheers,
Mark

Hi
Generally for posting FI documents (which is what this T Code does) , M alone is used which is the standard SAP system functionality. For other purposes like valuation, translation, etc. we can have different exchange rate types.
Jayaram

Not picking all open items at the time of out going payment(F-53)

Dear Experts,
I'm facing the issue at the time of out going payment(F-53)
At the time of vendor line item display system is showing open items but at the time of out going payment(F-53)
system is not picking the all open items it is picking only two items
Pls help
Regards
Hari Prasad

Hi Experts,
Thnx for Quick response
As per your instructions, I checked auto payment run here we have done successfully for vendor
Open items shown in FBL1N but these open items not coming at the time of out going payment
I checked SPL GL indictors also
Regards
Hari Prasad

Windows 8 not picking up embedded product key when installed with WDS

Ok so here is my setup.
Server 2008 R2, running WDS and serving various images.
the Windows 8 image is a vanilla boot.wim and install.wim imported from a system builder iso.
If I burn the ISO or extract it onto a USB drive, then the install process picks up the embedded Windows product keys no problem.
If I deploy the same thing via WDS, the setup wizard asks for the keys, ergo, is not picking them up from the UEFI firmware. Is this an inherent limitation of WDS or am I doing something wrong?

Hi,
As it has been a while since you post the question, whether the issue still exists? Have you tried to entered the product key in unattended file? If issue still exists could you share the unattended file with us?
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forum a great place.

FBL1N not picking up customer itesm

Similar Messages

Maybe you are looking for