FBL3N consumes more memory

Hi all,
When i run FBL3N, it consumes more and more memory(~6 GB) on server. I think that there is a problem. I apply OSS note 194842, but problem was not solved. How can i achieve this problem?
Best regards,
Munur

Hi Munur,
I just did a search and came across your message, did you ever find a solution to your problem ?
We are experiencing a similar problem in our system running ECC6.0 I have seen users using in excess of 6.5GB of memory with transaction FBL3N in a single session! Surely this is not normal ?
We are currently on ERP6.0 SPS10 soon to be update to SPS13 which I'm hoping may "fix" the issue.
Anybody have any ideas ?
Regards,
Nelis

Similar Messages

Exchange 2013 - The Microsoft Exchange Transport service is rejecting message submissions because the service continues to consume more memory than the configured threshold

Noticed at about noon that no emails had been received all day. Began to investigate and found that the MS Exchange Transport service had been set to deny email submission because it was using too much memory on the server (91%).
The error message makes me think that we may have been getting used by malware or something similar.“The Microsoft Exchange Transport service is rejecting message submissions because the service continues to consume more memory than the
configured threshold.”
There are also several warning messages that list particular IP addresses and say that a connection from that IP was denied because there were already the maximum number of connections (20).
From what I can tell, all of the IP addresses are from Taiwan.
The time period for which some emails may be missing is from close of business yesterday ( 4/3/2014) through about 12:45 today (4/4/2014).
From the time I spent reading and trying to figure out the error, I think we may need to readjust our throttling policies to prevent this from happening.
The exchange server is currently running at 90%+ CPU and 50%+ memory usage the majority of the time, and I’m not sure how to fix it.
Also, I cannot get into EMS I get a access denied message from the destination computer. (Exchange server) I want to get into there to change the throttling policy back to default, since we disabled it.
The Error reads:
The WinRM client cannot process the request. The WinRM client tried to use Kerberos authentication mechanism, but the destination computer <Exchange> returned an 'access denied' error. Change the configuration to allow Kerberos authentication
mechanism to be used or specify one of the authentication mechanism supported by the server. (How do I do this?) To use Kerberos, specify the local computer name as the remote destination. (I'm trying to use EMS while logged into the local Exchange server)
Also verify that the client computer and the destination computer are joined to a domain. (Exchange is on our domain, and the computer trying to connect is the same computer) To use basic, specify the local computer name as the remote destination, specify
Basic authentication and provide user mane and password. Possible authentication mechanisms reported by server.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotingTransportException + FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
I assumed control of this exchange system already in place and I do not have much experience with exchange 2013 or server 2012. I do know 2008, but that doesn't help very much in this situation.
Recent changes to the system:
About three days ago we switch our sessions policy to allow many more connections, and I believe this caused the issue. This is what I changed it to:
Made the registry DWORD (32-bit) "Maximum Allowed Sessions Per User" and modified the value to 1000. Location of registry change @ HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
I just changed it to 10 from the 1000. I'm hoping this solves this. So far no.
Also, I am not the best in the shell or command line interfaces. Any help would be wonderful!

Hi,
Yes, could be hardware performance issue. Try recycle the Transport process and see if the issue persists.
Thanks,
Simon Wu
TechNet Community Support

How can i found which program consume more memory in server

Dear Experts,
please do needful on below issue
in my servers one server is very slow i checked in all arear
but i didnot found any issues on my servers
now i have one doubt
is their any problem in abapers coading
so i need to check how much memory it will takes for sql statments
i dont know how can i get this requirment
so please tel me how can i check sql statments which they consuming more memory in my server
Regards

Hi,
please do needful on below issue
For the same, I suppose ?
Use Transaction ST03, choose the period (day, week or month), select "Memory Use Statistics" and sort by "Average Total Memory Usage " or "Maximum Extended Memory Usage".
Check specially if some programs use Private Memory.
Regards,
Olivier

Edge server consuming more memory

Hi
We are using flash media server 3.0.1 to do online streaming for more than 1 year. Sometime (once in 2-3 months) edge server consumes more memory. It will be utilizing more than 80% of swap memory.
I am new to flash and unable to figure out, why this is happening.
FMS is running on unix box.
Please any body help me to know why this is happening.
Thanks in advance,
Bhaskar

Hello,
8 Gb is the strict minimum for solman itself, but your OS needs also at least 2Gb and maybe your DB is running on the same host and consume few Gb also...
Thus I would say the minimum RAM should be 12 Gb (8 for solman, 2 for Db 2 for OS)
Regards
Extract from SAP Solution Manager 7.1 Sizing Guide

Firefox 7.0.1 consumes more memory than just FF 7.0!

You have got to be kidding me, Mozilla! You claimed that Firefox 7.0 would consume less memory than its predecessors. Well, FF7.0 does consume less memory, but when I upgraded to Firefox 7.0.1 and used the browser, it now consumes MORE memory than FF7.0 did before, and it is now at nearly 300,000 KB to nearly 500,000 KB! And that was on my first use! The second or other times I used it, Firefox 7.0.1 only consumes less memory, than the first time I used the browser! Mozilla, when will you wise up and fix the memory leaks again?

That is nothing, my Firefox 7.0.1 consumes 2.47GB (2 473 805 KB to be exact) ram with just 2 open tabs...
My system is with 8GB ram and I'm running out of memory...
Most of the time when I browse, the pages load slowly, firefox freezes during scrolling (and assortment of other problems)

Oracle 11G consuming more memory

Dear experts,
I have upgraded oracle 10 to 11 as one of my project.
After upgrading the 11G is consuming more OS level resources. almost 15GB ram whith out any load.
I would like to know what is the minimal usage of 11G at os level.
thanks in advance.
Regards,
shiva P

For a old version of BW system with Oracle 11G, not sure how much your system is loaded.
However, you can always try to optimize resource available. If your memory is less, you need to add swap space and monitor it's usage.
Check for BW specific parameters.
1431798 - Oracle 11.2.0: Database Parameter Settings
180605 - Oracle database parameter settings for BW
1013912 - FAQ: Oracle BW performance
Divyanshu

SQL consuming more memory without any process

Hi experts,
SQL is consuming 95% of physical memory with out any process in SQL Server.How to overcome this problem.
Details:-
SQL 2008 64 bit in WIndow server 2008 SP2.
Thanks
Selva

Hi experts,
SQL is consuming 95% of physical memory with out any process in SQL Server.How to overcome this problem.
This is not a problem unless you show me Out of memory error.
Use following counters to set correct value for max server memory.
You should refer to perfmon counters to get estimate of memory utilized by SQL Server and then set accurate value
SQLServer:Buffer Manager--Buffer Cache hit ratio(BCHR):
SQLServer:Buffer Manager--Page Life Expectancy(PLE):
SQLServer:Buffer Manager--CheckpointPages/sec
SQLServer:Memory Manager--Memory Grants Pending:
SQLServer:memory Manager--Target Server Memory:
SQLServer:memory Manager--Total Server memory
Please read below article for details about this counter
http://social.technet.microsoft.com/wiki/contents/articles/22316.sql-server-memory-and-troubleshooting.aspx#Does_my_system_have_low_memory
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it.
My TechNet Wiki Articles

Consuming more swap space after upgrade from 10.2.0.1 to 10,2.0.4 on Solari

Hi,
After upgrading 10.2.0.1 to 10.2.0.4. Out of four database in one database is consuming more swap space. and in another database while executing catupgrd.sql, it is coming out with error ORa-04030 out of process memory error.
thanks in adavance
Anil Pinto

For your ORA-04030 error, pl see if MOS Doc 414237.1 (ORA-00600 [kksCallPopCallback] ORA-04030 (kxs-heap-c,kdbmal allocation) While Upgrading The Database From 9.2.0 To 10.2.0, With ORA-03113 Errors Halting The Execution Of catupgrd.sql on UNIX platforms) can help
HTH
Srini

Oracle consumes 100% memory on Solaris 10

Hi,
Our database (Oracle 10g, R2) is running is running on Solaris, When I use the unix command prstat -a, it shows that, 100% Memomry utilized. Below are the details.
PID USERNAME SIZE RSS STATE PRI NICE TIME CPU PROCESS/NLWP
12934 oracle 2573M 2559M sleep 59 0 0:00:00 0.1% oracle/1
5914 sirsi 4912K 4664K sleep 59 0 0:00:29 0.0% prstat/1
12937 oracle 4896K 4592K cpu3 49 0 0:00:00 0.0% prstat/1
833 oracle 2572M 2558M sleep 59 0 0:01:05 0.0% oracle/1
114 root 7464K 6632K sleep 59 0 0:01:20 0.0% picld/12
829 oracle 2573M 2559M sleep 59 0 0:01:04 0.0% oracle/1
823 oracle 2574M 2560M sleep 59 0 0:00:46 0.0% oracle/11
811 oracle 2573M 2559M sleep 59 0 0:00:43 0.0% oracle/1
146 root 2288K 1312K sleep 59 0 0:00:22 0.0% in.mpathd/1
831 oracle 2576M 2562M sleep 59 0 0:00:24 0.0% oracle/1
639 root 3664K 2392K sleep 59 0 0:00:00 0.0% snmpXdmid/2
700 nobody 7520K 3752K sleep 59 0 0:00:00 0.0% httpd/1
701 nobody 7520K 3752K sleep 59 0 0:00:00 0.0% httpd/1
637 root 3080K 2048K sleep 59 0 0:00:00 0.0% dmispd/1
472 root 5232K 2320K sleep 59 0 0:00:00 0.0% dtlogin/1
720 root 2912K 2400K sleep 59 0 0:00:01 0.0% vold/5
629 root 2376K 1664K sleep 59 0 0:00:00 0.0% snmpdx/1
702 nobody 7520K 3736K sleep 59 0 0:00:00 0.0% httpd/1
378 root 3928K 1784K sleep 59 0 0:00:00 0.0% sshd/1
699 nobody 7520K 3704K sleep 59 0 0:00:00 0.0% httpd/1
697 root 9384K 6520K sleep 59 0 0:00:01 0.0% snmpd/1
695 root 7360K 5376K sleep 59 0 0:00:04 0.0% httpd/1
375 root 12M 8088K sleep 59 0 0:00:01 0.0% fmd/15
354 root 3728K 2040K sleep 59 0 0:00:00 0.0% syslogd/13
415 root 2016K 1440K sleep 59 0 0:00:00 0.0% smcboot/1
416 root 2008K 1016K sleep 59 0 0:00:00 0.0% smcboot/1
338 root 4736K 1296K sleep 59 0 0:00:00 0.0% automountd/2
340 root 5080K 2384K sleep 59 0 0:00:00 0.0% automountd/3
263 daemon 2384K 1760K sleep 60 -20 0:00:00 0.0% lockd/2
256 root 1280K 936K sleep 59 0 0:00:00 0.0% utmpd/1
395 root 7592K 2560K sleep 59 0 0:00:02 0.0% sendmail/1
273 root 2232K 1496K sleep 59 0 0:00:00 0.0% ttymon/1
254 root 2072K 1224K sleep 59 0 0:00:00 0.0% sf880drd/1
417 root 2008K 1016K sleep 59 0 0:00:00 0.0% smcboot/1
272 root 5152K 4016K sleep 59 0 0:00:02 0.0% inetd/4
206 root 1232K 536K sleep 59 0 0:00:00 0.0% efdaemon/1
394 smmsp 7568K 1904K sleep 59 0 0:00:00 0.0% sendmail/1
128 root 2904K 2056K sleep 59 0 0:00:00 0.0% devfsadm/6
241 daemon 2640K 1528K sleep 59 0 0:00:00 0.0% rpcbind/1
245 daemon 2672K 1992K sleep 59 0 0:00:00 0.0% statd/1
251 root 2000K 1248K sleep 59 0 0:00:00 0.0% sac/1
123 root 3992K 3008K sleep 59 0 0:00:07 0.0% nscd/26
NPROC USERNAME SIZE RSS MEMORY TIME CPU
24 oracle 48G 48G 100% 0:04:48 0.1%
10 sirsi 1101M 35M 0.1% 0:00:32 0.0%
37 root 148M 97M 0.2% 0:02:18 0.0%
10 nobody 73M 36M 0.1% 0:00:00 0.0%
1 smmsp 7568K 1904K 0.0% 0:00:00 0.0%
4 daemon 12M 7920K 0.0% 0:00:00 0.0%
Total: 86 processes, 260 lwps, load averages: 0.02, 0.02, 0.02
Can anyone suggest why Oracle consumes 100% Memory? and how do we resolve this?.
Regards,
Sabdar Syed.

Many Unix tools add to each dedicated server process memory the SGA size because under Unix each dedicated server is attaching the SGA shared memory segment to its process address space: so these Unix tools are not so reliable for Oracle.
To check the Oracle memory usage, it is generally more recommendded to use the V$ views such as V$SGASTAT and V$PGASTAT.

Program which is consuming more heap

Hi Guys,
I am getting 'java output of memory' error regularly.My heap size is 1GB
Guys,can you help me to find the program which is consuming more heap?
Thanks

Please mention the details of the application release, database version and OS.
I am getting 'java output of memory' error regularly.My heap size is 1GBHow do you get this error? What is the complete error message?
Guys,can you help me to find the program which is consuming more heap?Is the issue with concurrent programs? If yes, is it with seeded/custom ones or both? What are the types of those concurrent programs? Please elaborate more. If the issue with the OPP, please post the complete error message from the OPP log file.
Thanks,
Hussein

HT1423 I am adding more memory, should I replace the top two slots with the 4g memory modules, then place 2g memory modules on bottom slots. Does it even matter?

I am adding more memory, should I replace the top two slots with the 4g memory modules, then place 2g memory modules on bottom slots. Does it even matter?

I am adding more memory, should I replace the top two slots with the 4g memory modules, then place 2g memory modules on bottom slots. Does it even matter?

How do I create my own favorite template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to templates, which take more memory. I have a large slideshow, and need all the space I can get

First, how do I create my own favorite theme template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to already existing themes, which take more memory. I have a large slideshow, and need all the space I can get. I just want to use a picture as my DVD cover, and then insert a slideshow. Also, when I try to burn my 8.5gb double sided slideshow, all that burns is the music. It is a large slideshow, a memorial on the life of my now deceased brother. This means a lot to me and to my family, and I am having so much trouble trying to burn it. I have gone into Project View and selected appropriately. The bar shows I have room to burn this DVD, but it does not burn. I have burned so many DVDs in the past, but this one just will not burn. I am so confused at this point. I will say this is the first 8.5gb I have attempted to create and burn. My specs list a 7.7gb or 4.7gb as operable....but there are no 7.7gb dvds. I had to purchase 8.5gb. Help? What am I doing wrong? I have spent so much time on this, and just cannot figure it out.

Final Cut is a separate, higher end video editor. The pro version of iMovie.
Give iPhoto a look at for creating the slideshow. It's easy to assemble the photos in an album in iPhoto, put them in the order you want and then make a slideshow of them. You can select from various themes and transitions between slides and add music from your iTunes library.
When you have the slidshow as you want use the Export button at the bottom of the iPhoto window and export with Size = Medium or Large.
Save the resulting Quicktime movie file in your Movies folder.
Next, open iDVD, choose your theme and drag the QT movie file into the menu window being careful to avoid any drop zones.
Then follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
The reason I suggest iPhoto is that I find it much easier to use than iMovie (except for the older iMovie 6 HD version). Personal preferences showing here.

How do i get more memory on my mac book air? is says that i can add 2 more gig how?

how do i get more memory on my mac book air? is says that i can add 2 more gig ??? or wat files can i delete

Macbook Air memory is soldered to the logicboard.
You can only get 4GB or 8GB (2012 Models) in the Air when you order it that way. Otherwise, you're stuck with 2GB.
Unless you're talking about hard drive space - then it is upgradeable - click HERE to see which one corresponds to your model.

How do i get more memory installed on my macbook air

How do i get more memory installed on my macbook air

If you are referring to RAM, the Air's RAM is not an upgradeable component. The RAM memory is soldered to the main board, and there are no expansion slots.
It is the price Air owners pay for miniaturization. Every Air is manufactured with all the memory it will ever have. Shop wisely.
It is technically possible to upgrade the SSD storage though, but will probably void any warranty.

How do I get more memory on my IMAC .I have 1 GIG and to run LION you need 2 GIGS?

How do I get more memory on my IMAC .I have 1 GIG and to run LION you need 2 GIGS?

Depends on the Mac; what model and processor is it?
 > 'about this Mac' > 'more info'
In the first section (hardware overview) post this info;
Nothing below that is reqd, especially not the serial number.

FBL3N consumes more memory

Similar Messages

Maybe you are looking for