FBL3n & FS10N difference

Hi All
We are working on ECC 6.0.
I've noticed that in our development client the number of line items diiffers in FBL3N and FS10N.
Under FS10N I'am looking for 8 period data for FY 2009 for the Balance Sheet GL. When I see balance for the same GL in FBL3N under 'All Items' giving to date as 30.11.2008, I've noticed that the more number of line items are getting generated and hence the balance doesnt matches of both the T.codes.
Also the balance has been duly carried forward to FY 2009.
What could be the reason for this?
Regards
Kapil

Hi BSR / Alex
I've selected cumulative balance for period 8 (FY2009) only in FS10N and TO date as 30.11.2008 for 'ALL ITEMS' in FBL3N and also selected Normal, Noted, Parked Items.
I've checked the selection criteria very carefully and there is hardly difference of 1-4 line items which I've srcutinized individually. I've even checked nothing has been filtered and other criterias as well.
Alex, in FS10N my ledger has been defaulted as 0L (Leading), while in FBL3N no Ledger is getting displayed.
Also as you said how can we check System-Status-report ?
Regards
Kapil
Edited by: Kapil Agrawal on Dec 26, 2008 9:50 AM
Edited by: Kapil Agrawal on Dec 26, 2008 9:52 AM

Similar Messages

FBL3N & FS10N difference. F.16 carry forward balance incorrcectly calculate

Hello,
FBL3N displays 100 in first year of an account. In first year when we run F.16 for the account to transfer balances to next year system has updated with 80.
Hence FS10N displays 80 but when we double click on the same it displays 100.
The account is Retained Earnings account & all items in the acount are open items. No archiving has been carried out.
Please let us know what are the possibilites that the miscalculation can occur. No Archiving has been carried out.
Thanks & Regards
Shreenath

Hi,
It might be that somebody has posted extra document in between the test run and update run. Just a thought
Regards,
Gaurav

Line items are not showing in fbl3n,fs10n,faglb03,fagll03

hi experts,
i am facing a problem to see the line item of inter unit clearing a/c. i am not able to see the line items in fbl3n,fs10n,fagll03 and faglb03. system response is "You have stored account 300000 in company code L001 as a clearing account. At the same time, you use line item management with this account" and"Error message issued because line item display cannot read data for an account in a ledger if line items exist partially in the entry view together with clearing items for which there are no line items. In such cases, only the data with line items would be selected"
i do not understand the system response. can anyone please help me to solve this problem?
thanks &regards
konishko

sir
thanks for your reply. as per your suggestion i am trying to change in fs00 to uncheck the line item management but i am unable to do that,system shows that i have to uncheck the open item managemt also but the said account contain the open item. so i am not able to change the same. is there any other way to do that. can you please suggest me in detail? and one more thing that i am able to see only the balaces in fs10n. but not able to see the line item.this is probably for missing the business area in line item.
but i needs to see the line items.
can you please tell me any alternate way in detail to solve this problem?
thanks and regards
konishko

FBL3n/FS10n Reports

Hi Friends
Is it possible to have vendor and PO details in FBL3n & FS10N reports ?
Moderator: Please, search SDN

In the output of the FBL3N and FBL5N, go to settings > Special Fields.
In case you want to populate certain specific value, you can use Business Transaction Event 00001650 for it in transaction code FIBF.
For this you can refer thread as below, logic needed to be changed for the field you want to populate:-
Need profit center in Vendor & customer Line items in reports FBL1N & FBL5N
Regards,
Gaurav

Cant see PO# in FBL3N,FS10N

hello ,
I'm trying to the see the Purchase Order# in FBL3N,FS10N along with the line item i see the PO# as blank even if i change the layout!!!
Is there any OSS notes??? or if not how do i achieve this.
Thank you in advance.

Hi,
Please refer to the below links which explains on this subject:
PO Number has not displayed in FBL3N (GR/IR Clearing Acc)
PO number in FBL1N and FBL3N
PO Number not showing in FBL3N report
Regards,
Kiron Kumar T.

Balance differences in FBL3N &FS10N for same G/L account

Hi all,
I am facing the problem in differences in balances for bothfs10n & fbl3n for same g/l account.This difference not for a single account total 9 accounts are there.what i observed was they started sap in 2000 for some g/l accounts i found balance in fs10n for all 12 periods in the year 2000 but there were no line items.in fbl3n also no balances for 2000 year.but they carry forwarded balance to 2001and so on up to 2007.
If i go for balances in fs10n and fbl3n as of 2007 the balance is different from fs10n.
In fs10n when i click on lineitem display in total balance colomn = all items for 01/01/2000 to 31/12/2007 balances in fbl3n.
when I click on line item in fs10n incumulatibalance colomn <>(is not equal to) all items for 01/01/2000 to 31/12/2007 balances in fbl3n.
Pls help me on this issue they were starting auditing for 2007 so they found the differences.
Thanks to all
Regards
chandra.

Dear Chandra,
Kindly check for inconsistencies, if any through the program SAPF190. This report will help you to know the status. If there are no inconsistencies, please look for the following :
- "Open item management" or "Line item display" in the G/L
master check boxes, if handled improperly, read the documentation of the report RFSEPA01.
- If this is not the reason, another one could be the report SAPF011 which you might not have run for the respective G/L accounts.
- If this does not help, please ensure if you have activated the New GL functionality. If so, you have to upgrade the Serive Patch levels through required SAP Notes.
Hope this information helps.
If all of the above does not help, I suppose, you can raise a ticket with SAP under inconsistencies component.
Suresh Jayanthi.

FBL3N & FS10N missing Field Purc Order in upgrade

hi all,
I´m having a problem because in the 4.7 version we made the proper configuration to see the PO and material fields in Line items (FS10N and FBL3N) but after the upgrade to ECC 6 this fields do not appear even though the configuration is the same that 4.7
Do you have the same problem?? I am stilling looking for OSS notes and threads
_Thanks

FBL3N definitely is available - Purchasing doc.
Anyhow- you can get the fields which is not available by defaulting Sort key for GL account - which will be populated in Assignment field(old allocation field).
Check whether this way problem can be solved
FS10N - is balances and will not be available at all even in old versions and not expected to.

MRN9 and FS10N Difference (URGENT)

Hi Experts
I have got a issue where MRN9/MC.1 doesnt tally with my GL account Balance FS10N. In MRN9 the stock Value and balance sheet value is same but in FS10N the value is different from the Stock Valuation report . I want to know how to get the same amount in both reports. I have even checked transaction OMS2 and there both quantity and value updation is ticked
URGENT
will Assign points if useful
Message was edited by:
Wasim Juwale

Hello
Check if all PDF accounts are set in OBYC.
Also run MRN8 to check any price variances.
Check the valuation methods in the documentation in the links.
http://help.sap.com/saphelp_erp2005vp/helpdata/en/b5/2f26a1d6f511d3b7f30000e82de955/frameset.htm
Reg
*assign points if useful

Difference in Trial balance A/c (WIP) & FBL3N

Hi All
Account balance difference
The Inventory WIP(GL Code xxxxx) value as per Trial balance and as per statement of a/c (fbl3n) is not tallying.
The same gl shows different values in fbl3n,fs10n & trial balance statement
fs10n balance and trial balance shows the same figure
regds
raj

Hello,
There could be one possibility.
Line item display has been activate at a later stage for this account.
Go and Block this GL account for posting in FS00
Make sure that you have put line item display to this account
Run RFSEPA01 program in SA38
Remove the posting block on the account which you have set in FS00
Now it should tally FBL3N and FS10N
Thanks,
Ravi

LINEITEMS MISSING IN FBL3N AND FS10N

Hi all,
I am facing the problem in differences in balances for both FS10N & FBL3N for same g/l account.There were some GL accounts showing difference .what i observed was they Migrated in 2000. for some g/l accounts i found balance in fs10n for all 12 periods in the year 2000, but there were no line items for respective g/l accounts.but they carry forwarded balance to 2001and so on up to 2007.
If i go for balances in fs10n and fbl3n as of 2007 the balance is different from fs10n.
In fs10n when i click on lineitem display in total balance colomn = all items for 01/01/2000 to 31/12/2007 balances in fbl3n.
when I click on line item in fs10n incumulatibalance colomn (is not equal to) all items for 01/01/2000 to 31/12/2007 balances in fbl3n.
I tried open&line item programs to generate lineitems but failed.
In debugging it is showing these g/l accounts are not storing in BSIS table.
Please give u r valuble advise for resolving this issue.
Is it correct to go for SAP help, there were some g/l accounts having this program remaing are showing correctly.
how SAP help to us to resolving this issue its not a problem with standard functionality .
please send me u r valuble advises
Regards
Chandra

Hi,
There are so many threads in this forum explaining this concept. Go through them.
FS10N and drill down to FBL3N
Balance differences in FBL3N &FS10N for same G/L account
Difference between FS10N report and S_ALR_87012082 Report
Diffrence in Total amount and Line item totals in FS10N
Re: balance diferences and line items missing in fs10n & fbl3n for same G/L
Re: difference in GL account balance & Balance showing in Trial Balance
Urgent:Difference amount in customer a/c statement and customer ledger bal
G/L Balance and Line items difference
Difference In Reports FBL1N & FK10N
Regards
Jyostna

F.08 & fs10n balance is not matching with fbl3n balance

Dear all
       i have a problem with FBL3N,FS10N,&F.08
Example
         G/l a/c :14001200   Sundry Cr - Exp -Dom
       in fbl3n balance amount is = 16,820,645.64-
       in Fs10n balance amount is =17,160,867.86-
        in f.08 balance=                     17,160,867.86-
Am confused why system showing this mismatch
Regards
     Ajeesh.s

Hi Ajeesh,
The problem you are facing may be due to the Special GL transactions(may be Down Payments made to Vendors/Sundry Crs). The balance can be matched only after you have cleared the items in the Spl GL with the T-Code F-54 only after the bills get approved. The last entry will be clearing with T-Code F-44.
Hope this will solve your problem. Reply if you have any issue.
Regards,
Ashish

Line item problem in FBL3n and FS10n

Dear ALL FI expert
In my one G/L account(WIP) I do not see any line item data using FBL3n, FS10n.
But the transaction is made in period jan ~ march/2009.
Can anybody tell me why the problem happend?
Note: Actually I can see last year data and it is okay.
Thanks & B.Rgds
Bishnu
23/04
Edited by: Bishnu Dey on Apr 23, 2009 11:08 AM

Hi Bishnu,
For the said GL, check in FS04, whether the line item mgmt tick was changed?
If changed do the following:
Activation of Line item management
For the same a GL had been created with no tick in 'Line item display'. Documents were posted.
Now the line item Display is to activated in the above GL.
For the same for the following process:
a)Tick the line item display in the GL master and save
b)The GL has to blocked for posting
In FS00, Click on the block button and tick the Block for posting button and save.
c)After the blocking of the GL, go to SE38 and enter RFSEPA01 as the program and press execute
d)Enter the Company code and the GL
e)Press Execute.
Now the line items were generated for the GL. Table BSIS was updated. Unblock the GL for further postings
Deactivation of line item management
Now for deactivating line item in a GL the following process should be followed.
a)Untick the line item display in the GL master and save
b)Block the GL for postings (as shown in 1.2.1)
c)Go to SE38 and enter RFSEPA04 as the program and press execute
d)Enter the Company code and the GL
e)Execute
After the execution of the program all the line items of that particular GL will be deleted from BSIS table. Unblock the GL for further postings
Regards,
Kiran

Difference between two report

Hi Experts,
FS10n & FBL3N Show difference Balance in same Account.
Some Entry not include in FS10N Report which was automatic Entry through MIRO.
What's the Resaon.
Said Resaon I not doing to change the Open Items Management
Regards,

Hi ,
This may be as a result of activating line item after posting transaction. Run program RFSEPA01 for the said gl and check.
Regards

Difference between debit

Dear Mates,
We have a Inventory-Spare Parts G/L account
When i see the FS10N g/l balances on the debit side for period 2,there is a figure appearing as 25,82,887/- and when i double click on the above said figure to see the line items whose total comes to 30,89,627/- with doc.type: WA.
Can please tell me ,what could be reason for the difference between Balance appearing on the debit side of the period 2 and line items total.
Please treat it very urgent as auditors are sitting on my head.
Thanks
Subbu

Hi,
Check the following thread
Balance differences in FBL3N &FS10N for same G/L account
Regards
Jyostna

Adding an field in the Layout Selection for Transaction FS10n

Dear Experts,
I am facing a problem and expect your help on this..
SCENARIO: After putting in the required values in the fields like the G/L Account, the fiscal year, company code, etc the transcation prompts you with an grid containing the debit, credit, balance..
Once you click on any of the balances you will see an ALV grid which can be customized according to your requirement.
ISSUE: I want a particular field called the offset account in the layout but it doesnt appear in the hidden fields list. Although i can see the same field in another server located in Delhi. I dont know whats the issue here but im not able to see it at all and dont know from where do i get it. The offset account is the field GKONT in the table ANLE..
I want to get the offset account into the hidden fields.. Please help me out guys..
Useful answers will be rewarded

Hi,
the field is named "Offsetting acct no." (GKONT) in tcode FBL3N ( FS10N - F2)
but it's not filled.
-> use database SDF - structure GSEG
or fm GET_GKONT
A.

FBL3n & FS10N difference

Similar Messages

Maybe you are looking for