FBL3N report showing dump 'Time limit exceeded'

Hi experts,
We are running report FBL3N ( G/L Account Line item display) for all GL accounts for financial Year 2008-2009( Posting date 01.04.2008 to 31.03.2009 ).The report is showing short dump( Time limit is exceeded ). Even for one month, we are getting the same error.
We would like to know the best practice to run the standard reports for longer periods with out getting dump.
Thanks in Advance.
Regards,
Farhanaz.

Hi
See Note 1135916 - Line items: Help for analysis for long runtime
I hope this helps you
Regards
Eduardo

Similar Messages

Short dump "Time limit exceeded" when searching for Business Transactions

Hello Experts,
We migrated from SAP CRM 5.2 to SAP CRM 7.0. After migration, our business transaction search (quotation, sales order, service order, contract etc) ends with the short dump "Time limit exceeded" in class CL_CRM_REPORT_ACC_DYNAMIC, method DATABASE_ACCESS. The select query is triggered from line 5 of this method.
Number of Records:
CRMD_ORDERADM_H: 5,115,675
CRMD_ORDER_INDEX: 74,615,914
We have done these so far, but the performance is still either poor or times out.
1. DB team checked the ORACLE parameters and confirmed they are fine. They also checked the health of indices in table CRMD_ORDER_INDEX and indices are healthy
2. Created additional indices on CRMD_ORDERADM_H and CRMD_ORDER_INDEX. After the creation of indices, some of the searches(without any criteria) work. But it takes more than a minute to fetch 1 or 2 records
3. An ST05 trace confirmed that the selection on CRMD_ORDER_INDEX takes the most time. It takes about 103 seconds to fetch 2 records (max hits + 1)
4. If we specify search parameters, say for example a date or status, then again we get a short dump with the message "Time limit exceeded".
5. Observed that only if a matching index is available for the WHERE clause, the results are returned (albeit slowly). In the absence of an index, we get the dump.
6. Searched for notes and there are no notes that could help us.
Any idea what is causing this issue and what we can do to resolve this?
Regards,
Bala

Hi Michael,
Thanks. Yes we considered the note 1527039. None of the three scenarios mentioned in the note helped us. But we ran CRM_INDEX_REBUILD to check if the table CRMD_ORDER_INDEX had a problem. That did not help us either.
The business users told us that they mostly search using the date fields or Object ID. We did not have any problem with search by Object ID. So we created additional indices to support search using the date fields.
Regards,
Bala

Program terminated: Time limit exceeded, ABAP performance, max_wprun_time

Hi,
I am running an ABAP program, and I get the following short dump:
Time limit exceeded. The program has exceeded the maximum permitted runtime and has therefore been terminated. After a certain time, the program terminates to free the work processfor other users who are waiting. This is to stop work processes being blocked for too long by
- Endless loops (DO, WHILE, ...),
- Database acceses with large result sets,
- Database accesses without an apporpriate index (full table scan)
- database accesses producing an excessively large result set,
The maximum runtime of a program is set by the profile parameter "rdisp/max_wprun_time". The current setting is 10000 seconds. After this, the system gives the program a second chance. During the first half (>= 10000 seconds), a call that is blocking the work process (such as a long-running SQLstatement) can occur. While the statement is being processed, the database layer will not allow it to be interrupted. However, to stop the program terminating immediately after the statement has been successfully processed, the system gives it another 10000 seconds. Hence the maximum runtime of a program is at least twice the value of the system profile parameter "rdisp/max_wprun_time".
Last error logged in SAP kernel
Component............ "NI (network interface)"
Place................ "SAP-Dispatcher ok1a11cs_P06_00 on host ok1a11e0"
Version.............. 34
Error code........... "-6"
Error text........... "connection to partner broken"
Description.......... "NiPRead"
System call.......... "recv"
Module............... "niuxi.c"
Line................. 1186
Long-running programs should be started as background jobs. If this is not possible, you can increase the value of the system profile parameter "rdisp/max_wprun_time".
Program cannot be started as a background job. We have now identified two options to solve the problem:
- Increase the value of the system profile parameter "rdisp/max_wprun_time"
- Improve the performance of the following SELECT statement in the program:
SELECT ps_psp_pnr ebeln ebelp zekkn sakto FROM ekkn
INTO CORRESPONDING FIELDS OF TABLE i_ekkn
FOR ALL ENTRIES IN p_lt_proj
WHERE ps_psp_pnr = p_lt_proj-pspnr
AND ps_psp_pnr > 0.
In EKKN we have 200 000 entries.
Is there any other options we could try?
Regards,
Jarmo

Thanks for your help, this problem seems to be quite challenging...
In EKKN we have 200 000 entries. 199 999 entries have value of 00000000 in column ps_psp_pnr, and only one has a value which identifies a WBS element.
I believe the problem is that there isn't any WBS element in PRPS which has the value of 00000000. I guess that is the reason why EKKN is read sequantially.
I also tried this one, but it doesn't help at all. Before the SELECT statement is executed, there are 594 entries in internal table p_lt_proj_sel:
DATA p_lt_proj_sel LIKE p_lt_proj OCCURS 0 WITH HEADER LINE.
p_lt_proj_sel[] = p_lt_proj[].
DELETE p_lt_proj_sel WHERE pspnr = 0.
SORT p_lt_proj_sel by pspnr.
SELECT ps_psp_pnr ebeln ebelp zekkn sakto FROM ekkn
INTO CORRESPONDING FIELDS OF TABLE i_ekkn
FOR ALL ENTRIES IN p_lt_proj_sel
WHERE ps_psp_pnr = p_lt_proj_sel-pspnr.
I also checked that the index P in EKKN is active.
Can I somehow force the optimizer to use the index?
Regards,
Jarmo

Time Limit exceeded error in ALV report

I am gettting error "Time Limit Exceeded" when i execute ALV report. Can i run the program in background and how to do that?. I had already optimized my query in the program but even then i am facing the same issue.

You can process the alv in background by pressing F9...I guess that the output would be available as a spool in SP01.
You may need to re-check your query...And also, review the alv catalog and any events you are using....
Greetings,
Blag.

Time Limit exceeded while running in RSA3

Hi BW Experts,
I am trying to pull 1 lakh data from CRM to BI System.
Before scheduling, i am trying to execute in RSA3.I am getting the error message as "Time Limit Exceeded".
Pls suggest, why it is happening like this.
Thanks in advance.
Thanks,
Ram.

Hi,
because huge data with in the stipulated time it is not executing and showing the all records ,so it is better to go any selection option by each document type or some else then u can add all the documents ,anyway in bw side we r running this job in background so no problem.if u want see all records at a time then u can discuss with ur basis people to extend the time for that.
Thanks & Regards
sathish

SMQ2 Time limit exceeded

Hi Experts,
IDOC to IDOC Scenarion--There are some entries in SMQ2 are showing "time limit exceeded". i tried to unlok the Queue every time i get the error and after that queue is going into Running status for some time and again it is giving the same error and status is "SYSFAIL". Queue registration is also done.we are facing this problem in production.
All other interfaces messages are processing fine except for one interface. some IDocs are processed even for the same interface. I assumed that the size of the message is large. so it is not processing, mapping step is not executed.
see the example below for one message which is not processed from XI
<SAP:MessageSizePayload>467228</SAP:MessageSizePayload>
<SAP:MessageSizeTotal>479041</SAP:MessageSizeTotal>
<SAP:PayloadSizeRequest>467228</SAP:PayloadSizeRequest>
We have restarted the complete XI server after Kernal upgrade and after that we are getting this problem, can any body give me the suggestion how can we solve the problem.

Hi
The size of the messages also not huge, we have tested it testing system and it is taking less than one minute to process the message. And we have checked at the Gate way & JCO connections are working fine. The problem is still there as i explained in my first post.
Every time it is giving time limit exceeded after unlocking the Queue.
Is there any other suggestions to resolve this issue.
Thanks in Advance
Neeru
Edited by: neeru on Mar 3, 2010 2:57 PM

Mails to 1 particular user is getting bounced - Command time limit exceeded

I've about 100 mail clients. Since yesterday morning, I've had one user whose incoming emails have been getting bounced. I've run a "mailbfr -m user" w/o success. The server is current on updates and has been restarted. All other users are functioning correctly. Notes:
-IMAP account
-This user has a 4GB Sent folder. All other folders are under 2GB.
-This user has recently starting syncing Notes from a Blackberry.
THE SMTP LOG:
Oct 7 08:26:52 myserver postfix/pipe[488]: D1BCE11CE230: to=<[email protected]>, relay=cyrus, delay=1000, delays=0.01/0/0/1000, dsn=5.3.0, status=bounced (Command time limit exceeded: "/usr/bin/cyrus/bin/deliver")
A PORTION OF THE BOUNCE EMAIL SENT TO SENDER:
This is the mail system at host myserver.com.
I'm sorry to have to inform you that your message could not
be delivered to one or more recipients. It's attached below.
For further assistance, please send mail to postmaster.
If you do so, please include this problem report. You can
delete your own text from the attached returned message.
The mail system
<[email protected]>: Command time limit exceeded:
"/usr/bin/cyrus/bin/deliver"
Reporting-MTA: dns; myserver.com
X-Postfix-Queue-ID: AD79711CE1DD
X-Postfix-Sender: rfc822; [email protected]
Arrival-Date: Thu, 7 Oct 2010 08:07:57 -0700 (PDT)
Final-Recipient: rfc822; [email protected]
Original-Recipient: rfc822;[email protected]
Action: failed
Status: 5.3.0
Diagnostic-Code: x-unix; internal software error
Any help?

Solved. This person was in-process of moving Blackberry notes to the imap account. There was an interruption during the transfer phase and the server's Notes folder became bad somehow. When Mailbfr hit that particular folder, it stopped the rebuild process.
I removed the Notes folder and ran Mailbfr again. The Notes folder was recreated and the rebuild function completed.
Mail delivery has been restored to this user.

Time limit exceeded during activation of ODS.

Hi all ,
Iam loading data to 0FIA_DS12 from 80FIA-DS11 , while activating the ODS it is giving me the errors
Time limit exceeded. No return of the split processes
Background process BCTL_46TLB77BCWTDNQIKN0772P16K terminated due to missing confirmation
Error during confirmation of process 000002
Iam not able to get this error , tried to activated it again but not working.
Could anybody help me in this regard as its a bit urgent as we r working in production..
Thanks in advance

Hi,
I am getting the short dump.
TYPELOAD_NEW_VERSION
Short text
    A newer version of data type "/BI0/AFIA_DS1240" was found than one required
What happened?
    Runtime error
    The current ABAP program "GP46APBHXXAZADBZKVPTC7TA81O" had to be terminated
     because one
    of the statements could not be executed at runtime.
What can you do?
    Restart the program.
    If the error persists, contact your SAP administrator.
    You can use the ABAP dump analysis transaction ST22 to view and manage
    termination messages, in particular for long term reference.
Error analysis
    The data type "/BI0/AFIA_DS1240" was loaded from the database during the
     program run.
    However, a type of a newer version than the one requried was found here.

Query0;Runtime error time limit exceeded,with parallel processing via RFC

Dear experts,
I have created a report on 0cca_c11 cube and while running my report when i give cost center group which contains many cost centers , my report executes for long time and at last gives message
"Error while reading data;navigation is possible" and
"Query0;Runtime error time limit exceeded,with parallel processing via RFC"
please tell me what is the problem and how can i solve this
Regards
Shweta

hI,
Execute the Query in RSRT with Execute and Debug option.
Select SQL statements toknow where exactly it's taking time.
Let us know the details once you done.
Reg
Pra

RFC_ERROR_SYSTEM_FAILURE: Time limit exceeded. Connection Pool - JCO api

Hi Everyone
My Connection Pool parameters JCO api.
client=300
user=SISGERAL_RFC
passwd=******
ashost=14.29.3.120
sysnr=00
size=10
I have these parameters on my Connection Pool and sometimes appear these wrongs in my application:
1.
2006-01-07 13:20:37,414 ERROR com.tel.webapp.framework.SAPDataSource - ##### Time limit exceeded. LOCALIZED MESSAGE = Time limit exceeded. KEY = RFC_ERROR_SYSTEM_FAILURE GROUP = 104 TOSTRING = com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Time limit exceeded.
2.
2006-01-07 14:01:31,007 ERROR com.tel.webapp.framework.SapPoolConnectionManager - Timeout
Id like to know if is happening.
Are there something wrong with my connection pool?
What can be happening?
Thanks

Raghu,
Thanks for your response.
Yes, the pool connections are in place according to the sAP note mentioned above.
Regards,
Faisal

Error while running query "time limit exceeding"

while running a query getting error "time limit exceeding".plz help.

hi devi,
use the following links
queries taking long time to run
Query taking too long
with hopes
Raja Singh

TIME LIMIT EXCEEDED ERROR WHILE EXECUTING DTP

Hi gurus,
I Have got an error while executing
The errors are as follows.
1.Time limit exceeded. No return of the split processes
2.Background process BCTL_DK9MC0C2QM5GWRM68I1I99HZL terminated due to missing confirmation
3.Resource error. No batch process available. Process terminated
Note: Iam not executing the DTP as a back ground job.
As it is of higher priority the answers Asap Is appreciated.
Regards
Amar.

Hi,
how is it possible to execute a DTP in dialog process. In my mind it is only possible for debugging...
In "Display Data Transfer Process" -> "Goto" -> "Settings for Batch Manger" you can edit settings like Number of Processes or Job Class.
Additional take a look at table RSBATCHPARALLEL and
http://help.sap.com/saphelp_nw04s/helpdata/en/42/f29aa933321a61e10000000a422035/frameset.htm
Regards
Andreas

Time limit exceeded error

Hello All,
I am trying to execute a custom program with a variant, but I receive the Time limit exceeded error [TIME_OUT].
I am now trying to analyse why this error has occurred as I am a beginner. Any help shall be greatly appreciated.
Regards,
Arpita.
Moderator message: Welcome to SCN!
Moderator message: Please Read before Posting in the Performance and Tuning Forum
Edited by: Thomas Zloch on Oct 20, 2011 2:01 PM

Hi Ramya,
Your prog running in the back ground, so the time limit of the prog is exceded. Go to sm37 see the prog running time if exceded correct the time.
Regards
Srinu

Time Limit exceeded error in R & R queue

Hi,
We are getting Time limit exceeded error in the R & R queue when we try to extract the data for a site.
The error is happening with the message SALESDOCGEN_O_W. It is observed that whenever, the timelimit error is encountered, the possible solution is to run the job in the background. But in this case, is there any possibility to run the particular subscription for sales document in the background.
Any pointers on this would be of great help.
Thanks in advance,
Regards,
Rasmi.

Hi Rasmi
I suppose that the usual answer would be to increase the timeout for the R&R queue.
We have increased the timeout on ours to 60 mins and that takes care of just about everything.
The other thing to check would be the volume of data that is going to each site for SALESDOCGEN_O_W. These are pretty big BDOCs and the sales force will not thank you for huge contranns time
If you have a subscription for sales documents by business patrner, then it is worth seeing if the business partner subscription could be made more intelligent to fit your needs
Regards
James

Time Limit Exceeded while executing Proxy Program

Hi all,
we are frequently facing Time Limit Exceeded problem in R/3 system while exceuting proxy program for large payloads (appx 5-7 MB). Sometimes we are able to successfully restart the message and sometimes we have to delete these messages. How can we resolve this issue.
Thanks,
Mayank

hi Joerg,
we are getting this error in inbound queue in R/3 system, also this is a async call, so no chance of any communication interruption b/w SAP systems. From PI system, message is succeccfully passed to R/3 system & Time Limit Exceeded is coming in R/3 system inboud queue (SMQ2). Is it poosible that timeout will happen within R/3 system.
Thanks,
Mayank

FBL3N report showing dump 'Time limit exceeded'

Similar Messages

Maybe you are looking for