FBL3n screen layout in Material field

Hi Experts,
I had done config. for FBL3n report in Special Field
BSEG     MATNR     Material
BSEG     MENGE     Quantity
when i was see 3 GL A/c report.
1) INVENTORY GL a/c Material Code is blank display.
2) LOSS / GAIN PRICE VARIANCE, GL A/c Material Code is blank display.
3) GR/IR CLEARING GL A/c it is updated with Material Code and Quantity.
     in GR/IR two line item is display one is GR (WE) & IR (RE)
     In IR line item Material Code is display.
Why Material Code is not updated in GL INVENTORY & LOSS / GAIN PRICE VARIANCE ?
Please Guide?
Regards,
Jemes

Hi Jemes,
I presume that you are executing FBL3N transaction.
Kindly take the help of an ABAPer and try the programe RFPOSXEXTEND(in SE38 transaction code).
Once you run this programe the system will capture the Material Code and Quatity Value in FBL3N report.
I am not sure not much this program work in 4.7 version,but i have made changes to many clients above 5.0 version and it has worked for us.
If the above program is non executable in 4.7 version,then the work around will be to write a exit in relevant BTE.
Check with your technical guy and ask to find the relevant BTE number and call this BTE while executing FBL3N to update the Material Code and Quantity Values.
Hope this will solve your problem,if not revert,we will find some other workarounds.
Regards,

Similar Messages

FBL3N screen layout is in disable

Dear Experts ,
Can you tell me in TC FBL3N , screen layout ikon shows disable , how i can make enable
tell how this screen layout settings locked and unlocked for newly create screen layout
Thanks
Bhaskar

Dear Bhaskar,
unfortunately from Your problem description is not so easy to understand what it means layout disable.
Anyway I can immagine that the field is grey and that You cannot insert a predefine layout.
So this could be an authorization missing.
Please run SU24 for the transaction FBL3N. You will see all the objects that the transaction calls.
In particular there is the obkect F_IT_ALV that manages the "Line Item Display: Change and Save Layout".
Pleasde check if the user has this authorization by SU53 and checking his profile PFCG.
I hope this helps You.
Mauri

Material Info Record Screen Layout Help

Dear colleagues,
The question is regarding with material info record. Is it possible to differentiate screen layout of material info record per info category? For example, if I create standard info record u201Csales personu201D field should be required entry whereas other must remain optional.
Best regards.
Metin

Dear Andra,
If I apply what you suggest here is what happens. Suppose Iu2019m creating a material info record with standard info category and I marked u201CReference, salespersonu201D field as mandatory in customizing. Then for all other info categoriesu2019, such as subcontracting, pipeline, etc, this field also become as mandatory entry. What I have been asking is that only this field must be a mandatory entry if an info record with standard info category is created. For any other info category, field restrictions should stay same.

Material Field in ME21N

Dear,
When i go to ME21N and try to create a NB PO type after when i entered the vendor in the item overview tab material field didn't appear at all. when i just opened the ME21n at that time material field was appearing whats the problem.
Regards,
qsm sap

Hi,
For the Document type NB check the screen layout and check the config in SPRO for screen layout wther this field is supress or Not. Also for ME21N layout do check this field in customozation in Define Screen Layout for PO document type. If it is not supressed check wther you are giving or by default if the Acc Assignment category is appearing other then standard.
Also check if for other document type the Material field for this vendor is coming or not.
Thanks
Shashi
Do remember to provide points if the info is helpful, irrespective the issue is resolved or not.

Purchasing Info record screen layout not working for ME11

Dear All Experts,
I got requirement where GR Based IV and GR should be required for one vendor. So htought to create PIR from where I can make these two fields DEFAULT. So I went to table T162 from where I can make these two fields mandatory for ME11.
I followed the path : SPRO - Materials Management - Purchasing - Prcahsing Info Record - Define Screen Layout for making fields mandatory for ME11.
It is not working at all, as well I can see rest irrelevant fields which are not of my use are required. Have I missed any piece of configuration somewhere in MM ?
Experts guidance from forum will be very much appreciable.
Regards,
Revati Joshi.

HI,
as you know we can create purchasing info record manually as well as automatic at time of Po creation
If you mark it in ME11 manually it will be helpful to you
or you can mark its required field in Vendor master record as well for your vendor account group in following path.
Logistic general - Bunisess partner -vendors > control > define accont groups and field selection > select your account goups and click on details and double click on purchase data and check for "GR based invoice verification" and mark required field
Regards
kailas ugale

Default FBL3N Screen Variant

How do you default a screen variant to show up for a FBL3N screen layout to always appear as soon as you enter the transaction without manually pulling the screen variant?

Hi Hari Nair Junior,
Go to Txn FBL3N. Plz click customized local layout (ALT+F12)>option>local data tab>history "ON".
Hope this will help u.
TQ
Regards,
Nazrul

Screen layout for pr and PO in respect to Material master

Dear Experts,
I know that we can control the screen layout display, optional... with respect to document type...
But there is one requirement... When there is BATCH activated for the material... in Material master( batch avl) the "batch" field in PR.....Item details >Material Data needs to be optional field.. (possible to enter value)..
When material is not not acivated for batch.. then that field to be Display only(Not possible to enter value)
pls guide me is this possible.. ?

Hi,
This can be done with both customizing and specific developpement.
In SPRO: Materials Management/Purchasing/Purchase Order/Define Screen Layout at Document Level, you can define new fieldselection key (allways define new one as copy of standard in order to copy the document type).
Then you can define your own strategy to assign fieldselection key to a purchase order item in BADI ME_PROCESS_REQ_CUST method FIELDSELECTION_ITEM_REFKEYS according to the item data
This user exit allows you to had new fieldselection keys.
- CH_KEY0 is used for the transaction (in ME51N the fieldselection key is ME51N)
- CH_KEY1 is used for the activity (in creation mode the fieldselection key is AKTH)
- CH_KEY2 is used for the document type (defined in customizing for each document type)
- CH_KEY3 is used for the line type (if the item type is standard the fieldselection key is PT0B)
- CH_KEY4, CH_KEY5 and CH_KEY6 are free to use
Keep in mind that the system take the union of all fieldselection key. If a field is changeable in fieldselection ME52N and PT0B but not in AKTH then it will not be changeable.
Hope it helps
Regards

Screen Layout Field in the Asset Master Record

What is the use of the screen in the asset master record, ANLA-FELEI?
We have some assets where there are different values between this screen layout and the screen layout defined at the asset class (i.e. through configuration).
It seems the one defined within the asset class takes precedence.

HI
Scree Layout controls the diplay of fields, it may not be necessary for a user to use all the fileds provided by SAP. Hence the options like Required, Optional and Suppress are used to control the screen diplay and the TABs to be displayed based on the need.
Asses within the same class will have same fields since the screen layout are assigned to an Asset class.
Scree layout for the Tab Depreciation Area can also be controlled with the screen layout defied for the Depreciation Area. With this one can have different screen layouts per dep. area.
Hope i'm clear to you.
Thanks,
Vijay

Group Asset Screen Layout disabled fields

Hi All,
We have created asset masters with Book and Tax depreciation, For tax depreciation we are assigning Group asset. Issue is while doing take over value with t- Code AS92, system should propose the field of APC Value and Accumulated Depreciation Value but both the fields are proposing only for Book Depreciation
In case of tax depreciation APC value is editable and Accumulated Dep value is disabled, requirement is we need to enter both the values for tax dep along with group asset assignment.
This is happening only when we are assigning group asset while creation of asset master. if you donu2019t assign group asset to the asset master then system is allowing us to enter both values in both the depreciation area.
I have checked necessary configuration regarding screen layout and not found any solution.
Kindly help in this regard.
Regards,
Sahil K

Hi:
Please check for missing authorization if any in Transaction code ANSICHT. Have you checked group layout in AOLA..
Regards

How to create new field groups in AA master data screen layout?

Hello,
We are using ECC 6.0
We have created bunch of new fields for asset master data, but we want to make them visible only for particular asset class. So we need to customize in SPRO Asset Master Data Screen Layout, but there no specific field groups that we can customize. So how to create and add new field groups to manage them by radiobuttons Required, Optional, No or Display?

hi,
think, it's not possible.
look here:
http://help.sap.com/saphelp_47x200/helpdata/en/4f/71e05a448011d189f00000e81ddfac/frameset.htm
"The field groups and their respective fields are defined in system tables"
kind regards
Andreas

Adding material field in dynamic selection of FBL3N

Hi,
We need to add material field in the dynamic selection of FBL3N report.
I have gone through SCN forums but not found any related info and searched in service marketplace for related SAP notes and found 310886 as per this note.
G/L accounts: logical database: SDF
Permitted tables:
SKA1: all fields
SKB1: all fields
BSIS: all fields
But material field is not available in BSIS table, is there any way to add material in the dynamic selection of FBL3N report.
Regards,
RK.

Hi bhi,
Please check BTE 1650. You need to enhance the table. Please give the functional module to your ABAPer. He will do the rest.
Regards,
Kishore

Add field group to Asset Master Data Screen Layout

Hi Gurus !!
Does anybody know how to add field group in SPRO(Define Screen Layout for Asset Master Data)?. I have created my layout by coping 1000, but then I need to add Fund Center in Time-Dependent data logical field group.
Thanks a lot,
Sasha

I don't think you can add a funds center to the Time dependent tab.
Instead you need to use Derivatuon strategy. Use tcode FMDERIVE for strategy and FMDERIVER for GL accounts to cost center and cost centers to asset numbers or number range. From here the system derives teh funds center.

Additional field(company code) in purchase order screen layout

Hi All experts,
I have a requirement to set the company code in Purchase order as display field during PO creation or change.
I have checked in IMG under screen layout for purchase order but there is no company code field available.
How can I add the additional field into the screen layout.
Any inout will be highly appreciated.
Thank you in advance
Lost.

Hi Chee Wan Ng,
Where exactly you want to set the Company Code field in the Purchase order? Actually this field is already available under Org.data tab in the Purchase Order Creation transaction (ME21N), so you may not require to set the Company Code again.
Which version of SAP R/3 you are using?
Hope this helps you, if not, then give us more details to help you better.
Good luck.

MIGO Screen - Mvt Type 411 Q - change DEST material field as display

Hi Guru
We have client who would like to utilize movement type 411 Q (Transfer posting from project to own stock ) in MIGO screen.
The standard SAP MIGO screen does allow user to input material number at both "FROM" and "DEST" column.
User claimed that they wanted to block the input of material number field in DEST column (only allow display)
Could you please advise how to configure this display field which is only for movement type 411?
Please advise
Lyonie

Hi Lyonie
U can block the input material field in DEST column by doing the following changes.
Goto-SPRO-Materials Management-Inventory Management & Physical Inventory-Settings for Enjoy Transactions-Field Selection per Mvt Type
Select the field 411 UMMAT & Delete this entry.
Now check in MIGO transaction for 411 Movement type ,the input material number field in DEST column cannot be changed
Regards,'
Satpal Mujawar

Field status-screen layout-line layout

hi
EXPLAIN
FIELD STATUS
SCREEN LAYOUT
LINE LAY OUT
THANKS N REGARDS
MAUNAMI

Field Status It determines entering data in field is mandatory or optional.it also determines whether a field should be shown or it should be suppressed.Also status can be only display i.e u can only see the field but cannot change it.
Screen layout: It determines how screen should look like;what tab should be there and under each tab what fields should be there.
Line Layout It determine the sequence of the lines on a data entry form or standard report.

FBL3n screen layout in Material field

Similar Messages

Maybe you are looking for