FBL5N problem

Dear all,
In FBL5N customer line item display XYZ document is showing as a open item but for payment through F-28 and F-32 it is not showing in open item list in perticuler user, in my user id it will swon fine and other user ids also fine but one perticuler user id not shown in open item at the time of payment what is the problem .
Pls sugesst me where the problem is happens
Regards
KSP
Edited by: KSP123 on Dec 28, 2011 9:20 AM

Dear All,
Thanxs for ur replay,
That document is not related to any other clearing document no, and
also authorization given for perticuler t.codes but till problem is pending
Baseline date is posting date same 3.10.2011 payment terms is as per Net due date (as per posting date)
Pl help me
Regards
Ksp

Similar Messages

FBL5N problem in document currency

Hi all,
In the transaction FBL5N , the amount in document currency is posting data as 0.58 instead of 58.00. could you please suggest any SAP notes for this problem or any other solution?
thanks,
saranya

Hi
Check the settings in SPRO related to currency
since this is a std transaction to display the Customer line items
there should be something wrongly entered somewhere..
Reward points for useful Answers
Regards
Anji

FBL5N : problem with Match-code

Hi,
In Tcode FBL5N i click on match-code of Customer Account's field to choose a Customer, in the first table (Customers by company code) when Ii click on one customer the list of customers is closed but i get nothing in Customer Account's field (it is empty)
Please how to resolve this problem ?
Regards.
Edited by: jehade el aoumari on Jan 20, 2010 9:28 AM

Hi ,
I had the same issue with FBL1N and I managed to solve it.
1. Open SE11
2. Select radio button search Help
3. Enter DEBI
4. Click on change
5. Choose Maint. in logon lang.
6. Go to tab Included search help
7. Select line DEBID
8. Click on Param. assignment
9. On the 1st line enter KUNNR C KUNNR
10. On the 2nd line enter BUKRS C BUKRS
11. Save
This should solve your issue.
Regards,
Ben

Fbl5n problem break page print

hi expert
i have a problem!!
when print this report (fbl5n) exist break page for client..
who i can give out this break page??
thxz sorry my bad english

let me check ,please send the xml and rtf to [email protected]

Problem with customer open items. Transaction FBL5N and F-30

Hi all,
I have a little problem with a customer.
When I see transaction FBL5N, I can see 3 open items, but, when I go to clear then in F-30, no appears.
Anybody can help me.
Thanks in advance

Hi all,
I have solved the problem
The problem was that exits a proposal where these open items were.
I have deleted this proposal, and then, I could create a post with clearing.
Thanks everybody

T.code FBL5N: a problem with the print of the output list

Hi All,
with reference to the t.code FBL5N, I have a problem with the print of the output list of the report.
When I execute the print, I obtain one customer for each page printed.
I wonder if is possible to obtain more customers for each page printed.
Could anyone help me?
Thanks
Gandalf
Edited by: Umberto Gandalf on Dec 21, 2008 10:36 PM

Hi,
Though personally i havent tried this option, check the same
Go to Menu: Settings >> Switch List
This will make the value displayed in ALV format and then try taking print outs.
Regards,
Sridevi

Problem with adding new field to the mass change screen in FBL5N

Hi,
We have a problem with adding the field XREF3 to the mass change screen. We followed steps described in the SAP Note 640908, but the result is that when we try to mass change some documents in FBL5N and enter some values in the mass change screen, a message appears: "Please enter at least one new value" and nothing is changed.
If you have faced with such a problem, we would be grateful if you give us some tips.
Regards,
Miłosz Włodarczyk

The problem has been resolved: we didn't activate a code in SE80.

Problem in FBL5N correspondence type..

Hi all,
I have created one 'ZCRCT' correspondence type in FBL5N. I have assign Z program & sapscript for correspondence type.
When I create request by selecting any document no displayed using this correspondence through path
Environment ►Correspondence► Request a request get created then I display the same using path
Environment ►Correspondence► Display & my Zprogram along with sapscript assigned to it get executed.
But to work it properly I should pass the value of CoCd, cust code,document no,corresponding GL act which user selected on screen for display, to my zprog but I checked that there is no export statement that passes this value to abap memory.
Can anyone suggest other method by which I could get all this values & run my Zprogram .

Hi,
You don't need to create a data type after importing the IDOC.
Idoc itself acts as message type and message interface.
check this for creating a data type..
http://help.sap.com/saphelp_nw70/helpdata/en/2d/c0633c3a892251e10000000a114084/frameset.htm
Thanks,
Vijaya.

Printing problem while requesting customer account via FBL5N

Hi All,
I have one issue in our production system.
When a user request a statement of account for a customer account this is done via transaction FBL5N - environment-correspondence request and the environment-correspondence display.
When the display is performed the system should automatically generate a spool and print it. What happens now is that the spool is generated but not printed. The user has to go SP02 and take the prin out which he dont not want.
The user Profile printer is updated in OutputDevice and output immediately checkbox is checked.
Can any body please let me know about this.
Regards,
Venkatesh.M

Hi Jeffery,
Thank you for your comment.
Yeah, you can use universal print driver by configuring Remote Desktop Easy print on RDS Server. Install the driver on RDS server. Now to configure Easy print you need to have minimum client RDP 6.1(But suggest you to install RDP 8.1), .Net Framework 3.5 or
above and RDSH role.
Also under GPO setting need to check below settings.
Do not allow client print redirection: Disable
Use Terminal Service Easy print printer driver first: Enable
Computer Configuration > Administrative templates > Windows Components > Remote Desktop Services > Remote Desktop Session Host > Printer redirection
For more information, you can refer below articles.
How to configure Microsoft RDS Universal Printing
http://www.virtualizationadmin.com/articles-tutorials/vdi-articles/microsoft-hyper-v/how-configure-microsoft-rds-universal-printing.html
Using Remote Desktop Easy Print in Windows 7 and Windows Server 2008 R2
http://blogs.msdn.com/b/rds/archive/2009/09/28/using-remote-desktop-easy-print-in-windows-7-and-windows-server-2008-r2.aspx?Redirected=true
Hope it helps!
Thanks.
Dharmesh Solanki

Open Item available in FBL5N but not in F-28 & F-32 - URGENT.

Hi Gurus,
I have a problem in customer open items. I am able to see open item in FBL5N but while generating document in F-28, this document no is not available.
Please let me know what are the reasons at the earliest.
Thanks in advance for the same.
Regards.

Please check if dates are ok, multiple cocd is not present,
also in F-28 only one document type is not selected, even document date , posting dates can be different , which is not available in FBL5N, anyother fields if selected, also currency, FBL5N may have multiple currencies.
Also note when in FBL5N
Selection: Normal Items
There are two things
Items are displayed from documents that have neither a <b>special document status</b>, nor do they portray a special <b>G/L account transaction</b>.
so in F-28, if you don't give special G/L account it will take all also note special document status.
you can probably down both list and check one-to-one in excel and let us know what exactly the difference is. what is document type of that transaction
Regards
Jitesh

FD10N and FBL5N Reports are not matching

Hi,
When i execute FD10N FBL5N reports for customer balance, Both are showing different balances, why they are not matching with each other?
My FBL5N open item blance is not matching with FD10N.what could be the reason?
Is there any other report to show customer opening balances other than FD10N?
thaanks

Dear Dogdays
This is selection parameters problems- means please check once again what you selected check boxes and also check for Dates what you given
To check both the above cases, FD10N for the year you see the difference. Double click on the balance value for the period where you have seen the difference. The double click will call FBL5N for the period and customer. If the total of the line item report matches the balance in FD10N, then the issue is selection criteria
Regards
shankar

Problem in making logic for customer balance report

Hi,
I am working on a customer balance report in which i am picking the data from BSAD and BSID tables. I am facing a problem that i am able to calculate the opening balance in it but not able to calculate closing balance. I am comparing the data with tcode FBL5N for opening and closing balances for a given date range. Kindly help me out where i am getting wrong:-
Here the link to the code :-
http://docs.google.com/View?id=dfxswwff_11fdktr7ct
Edited by: nav009 on Feb 6, 2010 9:30 AM

Hi Nikhil,
Thanks for you response but i had developed the report and i am able to pick the correct data but i am facing the problem in displaying the NETAMT which is displaying the data using this formula :-
1.) NETAMT = NETAMT + W_TAB1-DR + W_TAB1-CR.
so that the last value matches with the closing balance.
When i am using this formula i am not able to display the correct data of deducting or addition of the opening balance in it but the value matches with closing balance .
2.) NETAMT = NETAMT + W_OPBAL-OPBAL + W_TAB1-DR + W_TAB1-CR.
When i am using this formula it is showing the first value correctly but not the last one which will be displayed in the closing balance.
I want to have desired output to display the first value to be displayed as it is showing in the (2) and last value to be displayed as it is showing in (1) last value.
How can i achieve this functionality? i really want to know...
Edited by: nav009 on Feb 10, 2010 6:29 AM

Cancel customer DP Request VF11 but remain as open item in fbl5n.

Dear SAP Gurus,
i have problem to cancel DP Request. I made DP Request from SD(VF01). And i want to cancel that DP Request because of any reason. so i cancel it through VF11 and its going smoothly. When i see the doc. flow, the status of that DP Request is not cleared but the status of the reverse document is cleared. the both should be have "cleared status", right?
when i see the FBL5N too, the DP Request is still Open, but when i see the cleared item, it shows me the Request has been cleared. but the posting key is 19. i think it should be 09, right?
can you anybody help me solve this issue.
thanks,
Land Lord

i have find the answer. see this sap note if you face the same issue Note 1532358 - Reversal of down payment request created incorrectly.
Thanks

Balance not matching as per FBL5n and FS10N

When we run the customer balance report FBL5n as on 09/29/2007 on week end it shown a balance ( open item for all customer and recon account 123456 ) of say 10 M. The same amount we got thru FS10N we ran on with GL 123456 i.e. 10M. But when we ran the report FBL5n today ( with same parameter 9/29/07 and recon account 123456, open items ) we are getting a balance of 13M but our GL balance is still 10M on 9/29/07. Here is my question why the balance has changed for FBL5N when I am running the report on past date ? I feel it should not. But say there is difference in these two reports, how to reconcile ?
My problem is I took the balance from FS10N and now I want details of that balance ( customer wise balance ) as on 9/29 . This should match and I need it for auditor .Kindly help me gurus.
Thanks
Satya

Satya,
The possible diffrence between FBL5N reports run on first time and second time might be.
There may be invoices posted to that Customer Accounts with past Posting Date after you took first Report.
To find out which invoice are posted after you run the report , run FBL5N again with the same parameters and select Entry Date column from the layout and sort it out. If you find some invoices where the Entry Date is past the Date you ran the first Report then these are the invoices which are contributing the diffrences.
Generally this will happen when Sales/Billing documents are released later to Accounting.
Thanks
Sivaram

FBL5N times out

Hi Sappers!!
When the user tries to run FBL5N with one company code and one business area, the transaction gets a short dump. Basically way too much data. The report is very important.
I thought of splitting the report based on account groups but that's too much of work I guess as this report needs to be run frequently by the user.
Is there any other way of getting customer open items for customers per company code AND per business area?
Custom repot is the last option....
Thanks for your time!!

The transaction failed in background?? How much time did it take before failing in background?
Also, if you are running this for a single customer, it should not fail unless you have way too many records, probably more than 600-700k.
We used to have the same problem before for F-32. When we enter a document number and press enter, the system would not go to the next screen to show the document for 10 minutes. We then de-activated a BTE (Business transaction event) in FIBF that did the trick.
The thing is, we had too many dispute cases for that specific customer and FBL5n was looping on all the dispute cases for each document. Try getting your ABAPer debug FBL5n and see if there are any BTE's ...that are prolonging the process.
Assign points if found useful. Thanks

FBL5N problem

Similar Messages

Maybe you are looking for