FBN1 no. range problem

Sir i am getting following error message in MIGO.
For object RF_BELEG ARP, number range interval 50 does not exist FBN1
Message no. NR751
Diagnosis
The database table NRIV has the delivery class 'C', i.e. the SAP default settings are only in client 000.
Procedure
Create the missing number range interval in customizing.
Transaction code: FBN1
I had already define no.range 500000000000 to 5999999999999 in FBN1.
Thanks i am online.

hi
go to FBN1
here give ur co code
click on interval
press interval(shift + F1)
give
NO 50
year 2008
from500000
to 599999
and save
hope it helps
regards
kunal

Similar Messages

Error : Message no. F5695 number range problem

hii all
i am facing a serious error. my 'SA' document type has picked up maximum number from the assigned no range. and so that i have assigned a new no range in SA document type
but when i am doing a new doument entry in Tcode - FB50 system pick the maximum number for the newly assigned no range and getting error messege
"Number range 6000 in year 22 has been used up for company code 2011"
Message no. F5695
Co Code = 6000
No Range = 22
Fiscal year = 2011
also when i am doing vendor invoice tcode = FB60, my system also shows the same error related to that document type. please help to resolve
i am also facing this no range problem when i try to post document from FI to CO. please see the link
http://forums.sdn.sap.com/thread.jspa?threadID=2132125&tstart=0
why system pick up the maximum no? i cant understand. i have checked the object RF_BELEG and RK_BELEG. in Tcode - SNRO. but there is no inconsistency. please also suggest what should be the standerd setting in the above object in Tcode-SNRO
please help. i am unable to post any document
Regards
Rajesh

hi Marssel Vilaça
In FBN1 22 no range already has taken maximum no and showing the messege
"Number range 6000 in year 22 has been used up for company code 2011"
Message no. F5695
This is for SA document type. also when i make entry with different document type such as vendor Invoice (DR), it also picks the maximum number from the no range
You can I adjust my counter in BKPF? and how can i use the remaining no range?? in FBN1 all the no range in internal, not external
i am also facing this no range problem in CO also (Tcode = KANK).
I just confused. please see my 1st thread
please resolve
Regards
Rajesh

Billing Number Range problem ( accounting document not generated)

Hi All,
I have created some billing types and for them I have assigned some internal number ranges. Now when I create a billing document it is getting saved with the proper number range but no accounting document is getting generated.
Also when I try to release the invoice I am getting an error which says " *Incorrect doc.no.: 10000009. Select document number between 0090000000 and 0099999999* "
K I N D L Y     suggest as U R G E N T.
Regards,
Danny.

Dear,
          Billing Number Range problem ( accounting document not generated) is not an error because when you create billing document then accounting document not generated. Accounting done after posting of that billing document with VFX3 or VF02 T.Code by account department.
           And for second issue you had define number range between 0090000000 and 0099999999 for invoice so thats why it happen.
Regards,
Sandip Shaktavat

Bluetooth range problem/mac mini

hello , i have a mac mini with the bluetooth/ airport installed. i have the mini connected to my 36 inch tv. i recently purchased an apple wireless keyboard and mouse. now as i can recall the range of bluetooth should be somewhere in the 30ft range. i was hoping to be able to sit on my couch and use this setup. now when i go more then 1 foot away from the mini with the mouse and keyboard they nolonger work. i updated everything and it still dosnt work. the mouse gets unconnected and the keyboard dosnt work then at all. can someone please help me for now i feel i have wasted my money and am going to return the mini, keyboard and mouse

I fixed this last night (Mac Mini, Late 2009). If you have upgraded your RAM there is a strong possibility that the bluetooth antenna came loose while reassemling the mini. I was very careful installing ram, but last evening when I dissassembled the mini I found that one of the bluetooth antennae was disconnected. Popped it back in, reassembled, and my reception went from 1 foot back up to the full extent of the room. If you are having range problems, take it apart (ifixit.com) and check it.

Z30 wifi range problem after upgrade to 10.3.1.1565

After upgrading on Z30 the OS from 10.2 to 10.3.1 I experience serious Wifi range problems. There is a room in our house where I had excellent wifi connection with 10.2 and now the Z30 does not find the router. Even the router SSID! If I go closer to the router, it connects (5-6 meters from the room where I tested). It is a quite new router, a Linksys EA6200 with the latest firmware. I rebooted the router. No result. I restarted Blackberry (switch on/off), no result. I deleted all wifi saved connection on phone and tried to reconnect. No result. I tried to make a soft reset (vol up/down buttons), no results. Dont understand, I made Over the Air (on wifi) OS update yesterday in the same room, same place. Now I dont see any router there altough the Android phone and the notebook gives 4 bar wifi there. Before OS Upgrade I made a full backup (everything) in the Blackberry Link, tried to restore to the earlier OS version, but the restore uploaded to the new OS the personal data and not the earlier OS System. How I could solve the Wifi problem or roll back to the earlier official version? I dont see possibility on phone. It's crazy to have a quite good business phone which is now unuseable for its original functions without normal wifi connectivity... I understand to advise hacking or restarting router, etc... but how about if I go to abroad? I cannot restart the router there... I need stable wifi or a stable operating system...

I have seen numerous posts on other forums about the degraded wifi performance on devices running 10.3.1.xxxx.
I definitely noticed a dropoff in signal strength when I went up to 10.3.1. I remedied it by putting in a better router, but I don't believe one should have to do that in order to maintain was was acceptable performance under a previous OS. 10.3.1 is supposed to be an upgrade after all.
I also notice a difference between Z10(STL100-1) and Z30(STA100-6) on 5GHz wifi : Z10 finds and connects with no problem, but Z30 does not find the network at all, even when right next to the router. I subsequently discovered that the router autoselects channel 149 on 5GHz, which the Z10 is happy with. For the Z30, I tried all other available 5GHz channels on the router in turn, and eventually found that Z30 will find and connect if the router is manually set to channel 48 only. A bit restrictive for a high-end device.
It has been postulated that the claimed improved battery life on 10.3.1 comes at the expense of compromised wifi performance. Could this be the case?
Hoping this issue soon finds itself in the "under investigation" box at BB.

Help with puzzling wifi range problem on Macbook Pro

Hi There,
I am experiencing wifi range problems with my MacBook Pro (10.9.4).
Our wireless modem (Arris DG860) is located in the office, in the center of our home. The wifi bars register full on my Macbook and the internet works well in office.
When I move my Macbook to the lounge room, 6 steps away, my internet stops working despite wifi bars remaining full. We also have an Apple TV in the lounge room (I have airplay disconnected on Macbook). 15% of the time, I can somehow get the internet to work in the lounge room (sometimes just by disconnecting airplay),then it mysteriously stops- with wifi bars remaining full.
85% of time, the internet doesn't work at all in lounge room (still full wifi bars). Other rooms of the house that are similar distances away from modem experience the same problem. We did not experience this problem with our old Macbook pro (purchased in '09). With our old Mac we had same internet connection, modem and Apple TV.
The only place our current Macbook receives good internet connection is in the office.
We also have an iPad and two iPhone 4S'
Any suggestions anyone? TIA

Most people who live in neighborhoods or apartments are not blessed with so few WiFi transmitters to contend with. There are no clear channels for most people, even assuming the user knows how to optimize their router, which most people don’t.
I would also explain that I am FCC licensed amateur radio operator K5ZN extra class. I know how radios work and how electromagnetic waves behave. Every diagnostic and symptom tells me there is some incompatibility between my MBPs radio and specifically the Comcast modem-router. In another discussion I gave some technical information about the problem which I spent several day diagnosing while using two different Comcast "Docsis 3" routers.
I have not seen this WiFi problem when using Airport or other standard routers like Linksys or Netgear. The OP didn’t say what router they are using. My suspicions tell me that Apple is moving in the direction of a very sensitive power-saving radio while ISPs are trying to blast the neighborhoods with powerful WiFi. The result is that my poor Macbook can’t get a good signal.

Document Number Range problem

Dear All,
Previously Document number range(FBN1) for Invoice was External, then i have changed to Internal number, now the problem is that in Counter it shows 1800000126 but system is showing document number 1800000136. Pls help on this & when i am changing from Internal to External system is showing error as "Lower limit can only be changed during Initial Entry".
Pls pls help on this.

Dear ranjith,
If you want to change number ranges from external to internal no ranges,
from T-code FBN1 you can for the changes first go to ,<change status button> and make you counter no as 0 and save the intervals,
and come to change intervals button and change the no ranges according to ur requirement.
Assign points.
SU

Fbn1 number range overlap

hi all,
we are updating the number range for the fiscal year in FBN1 where we are getting the error message as ENTER INTERVALS WITHOUT OVERLAP
no              year        from                to
20                  2008          2008000000                    2008999999
   20                     2009          2009000000                    2009999999
year 2011 and 2012 2013 not used
    20                     2014          2014000000                   2014999999   here its showing the error ENTER INTERVALS WITHOUT OVERLAP
kindly help how to solve this problem
thanks and regards,
chethan

Hi
In table NRIV, give object name as RF_BELEG, Subobject value as company code. Sort entries in ascending order of "From number" and check the overlapping entry.
In FBN1 when you add interval use F4 for "from" field there you will be able to see non-overlapping entries and available options. If this doesn't help you to identity overlapping number range, then select any available number range, save. Then go to added number range try changing it there, when you try to save it there, it will display all overlapping entries.
Regards
Aniket

Out of Range problem

I have a G5 dual 2.3 with a Sony monitor (analog) connected to the DVI port by the converter that came with the Mac. I have a problem in that certain games set the default resolution to a setting that is out of range of the monitor. Specifically, the refresh rate is out of range for it. This same problem occurs with any VGA monitor I use. Is there any way around this? I just bought the Cars game for my kids, for example, and I can't use it (Cars does not have a windowed mode).
Thanks

As it turns out, I tried switchresX and I can force the game not to change the settings. It works, but it seems silly for me to spend an extra 17.00 to play a $29 game. Anyone know of a free utility that does the same thing?

Monitor out of range problem

I have a G5 dual 2.3 with a Sony monitor (analog) connected to the DVI port by the converter that came with the Mac. I have a problem in that certain games set the default resolution to a setting that is out of range of the monitor. Specifically, the refresh rate is out of range for it. This same problem occurs with any VGA monitor I use. Is there any way around this? I just bought the Cars game for my kids, for example, and I can't use it (Cars does not have a windowed mode).

as a wild guess, some monitors come with software drivers that allow to get more options for setting parameters.
you can check Sony site for any drivers for your monitor model, and also check what video card you have in G5 and check on card manufacturer site for driver updates for Mac OS.

OMX4 - FBN1 - Number range for Material document and FI document

47 - is for FI document number range in Material ledger FBN1. OMX4 gives number range for Material document. My question is how big the number range must be? Since thousands of Materials involved, I couldn't imagin this?
Anybody knows, how to determine the size of no. ranges in Material Ledger configuration? SAP simply says, check no. ranges whether it meets the requirement....
I don't expect an answer again, just check your business, how many transactions would be in a period, which is not quantifiable now?
I would like to understand this from somebody's experience of using insufficient or excessive no. ranges, especially in this area.
Cheers,
Ashok

What is the number range you are using? Year Dependent or Independent?
When you don't know the document number consumption pattern you should use Year dependent number range in both OMX4 & FBN1. Observing this for a month will give a rough Idea and observing for a Quarter will give you a fair Idea and the result for a year gives almost near to accurate consumption of number ranges.
The generation of documents is dependent on the number of materials and Profit centers involved. As much as possibe use Summarization at profit center level when posting to FI. This will reduce the number of documents and line items that are getting generated.

Stored Procdure date range problem

Hi All,
My Vendor created a Stored procedure which asks for a date range when first creating a standard report. Once the date range is entered then I select which data fields I want to display, etc. Once in the report, I can see the parameter fields, but they have a [?] with a weird little yellow icon, and I cannot see the parameter fields in the parameter tab. My users need to be able to change the date range in InfoView, but since there isn't a date range parameter, they cannot, and I also cannot get it to show up in the report in CR 2008. The only time I can get the date range entered is when creating a report, here is the procedure that the vendor gave me:
XSAC_GET_TEST_COUNT
                      ( P_REPORT_CURSOR IN OUT XSAC_REPORTS.TEST_COUNT_VIEW_TYPE,
                        P_START_DATE     IN DATE ,
                        P_END_DATE       IN DATE )
Not sure how to fix this, and neither does the Vendor, although they created it.
Any help would be much appreciated.
I have other reports where I have successfully created a date range parameter, and they work fine, this is my first time with a stored procedure. and it asking for a date range when selecting the data source. Not from a date field in the report

Hi All,
I found the problem,
The first Option is: Show on (Viewer) Panel, it was set to Do Not Show . So it was hidden.
I changed it Editable and it works fine.
Hopefully this will help someone in the future.

Recurring Vendor Invoice- Number range problem

I am trying to setup recurring invoice entry through FBD1 for my company code abcd. I entered KR as document type. I have already set up number range which is 03 for KR. after entering all field data on the first screen when I click on "first entry data entry" or "account assignment model", I get an error message"saying "in company code abcd, the number range x1 is missing for the year".
I am not sure what I am doing wrong. My number range for KR is 03 and it is assigned to my company code abcd. Where is the 'X1" coming from? How i can resolve this?. Thank you for your advice.
Rashid

Hi Rashid,
In FBD1, you only create a recurring document and this document is only saved in the system, not posted. This recurring document will be used to post multiple documents later on when you run recurring documents through F.14
So logic is
FBD1 document - Only saved. Never posted. Recurring documents use X1 number range in standard system and you need to maintain X1 range in FBN1.
F.14 - When you run the above recurring document , document is posted and document type will be whatever you specify while creating recurring document in FBD1(KR in your case). System uses number range 03 when it posts a document from F.14
Assign points if useful
Thanks, Ashok

Asset no range problem

hiii all
i am facing a problem relating to asset configuration. i am rechecking the asset configuration over all. i checked the chart of depriciation is attached to the co code. but when i am check the "define number range interval" under the asset class, when i am putting the co code in no range, the msg shows..... "co code does nor exist". but i can create asset master date through as01. why the msg shows like this. please resolve.
regards
rajesh

Hello
Please check the companoy code does not exsit is for your company code or not
Also check all the basic settings has been done for the company code or not
Please check the table BKPF whether any entries exist or not
If the problem still exist let us know the compleate erreo information with error message number
Thanks
Kameshwar Rao

Assessment: number range problem

Hi Fi-CO gurus's,
my problem is the following: I try to perform an assessment (Tx code 3KE5), but I receive an error message in the "display EC-PCA: Actual assessment basic list " screen:
Document number: range not found
And further:
Document number: range not found
Message no. GA703
Diagnosis
An error occurred during document number determination. No range was found for number range object GL_LOCAL, sub-object 0010.
System Response
No document number was determined. Results could not be updated.
Procedure
Inform the person in charge of number ranges.
Could anyone help me.
Thanks in advance.
Ric.

Hi Seth,
I checked out table NRIV and found entry....
But in GB02 I have the following problem:
when I try to create an interval for the group (group maintenance) I choose "Act. document from direct posting with GB0" ...
There is no displayed number range and when I try to create it, it is not possible because there is already an existing number range, but it can't activate it...
An it takes all the available range (from 000000000 to 9999999999)
Regards.
Ric

FBN1 no. range problem

Similar Messages

Maybe you are looking for