FBN1 Number ranges issue

Dear All,
We are in roll lout project.We went live in June 2009.We are following April to March fiscal year. In our system we have maintained number ranges for fiscal year 2009 in FBN1 transaction and not maintained for 2008.Since the company established  in  2008.Client has posted some provision entries for last fiscal year 2008 like share capital, traveling exp and other payments, receipts and want to prepare balance sheet for F.Y 2008. But number ranges are taken from fiscal year 2009.
Both fiscal years are sharing F.Y 2009 number ranges.
It was not shown error message like
u201C In company code xxx, the number range xx is missing for the year 2008 u201C
Regards
Govind

Hi Govind,
What is the posting date with which they have made the postings?
The system is not showing the error message because they might be posting in the FY 2009, ie, Apr 2009 to Mar 2010. If they post with a date prior to 01.04.2009, then the system will show an error message as you have mentioned.
Regards,
Mike

Similar Messages

  • I have number range issue for fi posting.

    hi gurus,
    i have number range issue for fi posting (fb01,fb50).
    problem in updating table glpca due to duplication of record.
    INSERT GLPCA FROM TABLE T_GLPCA .
    With Regards,
    Shakthi Raj N.

    error msg  after generating document no and it is not getting updated in data base
    error msg
    "Express document "Update was terminated" received from author "ecciabap""
    Client.......   750
    User.....   ECCIABAP
    Transaction..   FB01
    Update key...   C83B07DE4DADF13CB4950017A4AB8015
    Generated....   02.03.2009, 20:37:23
    Completed....   02.03.2009, 20:37:23
    Error Info...   00 671: ABAP/4 processor: SAPSQL_ARRAY_INSERT_DUPREC

  • Number Range issues with sales orders in CRM and R/3

    Hi,
    We are currently using CRM4.0. I have sales orders created in R/3 and they are replicated into CRM.  These sales orders can only be created in R/3.  I have given them a number range of 0000000001 and 0005899999, however we have reached the number 0005899999 so we increased the internal number range for the sales orders in R/3 to 0009499999, however we forgot to update the number range for the corresponding sales transaction type in CRM so we are getting the following error in CRM:
    +Enter a business transaction number between 0000000001 and 0005899999
    Message no. CRM_ORDERADM_H532
    Diagnosis
    You have attempted to enter a transaction number which is not allowed for the transaction type.
    Procedure
    Enter a number between  &1 and &2. Make sure that you issue a number which has not already been issued.+
    We have now updated the CRM number range to match that in R/3 to 0000000001 and 0009499999 but we are still getting the error above on our existing sales orders in CRM.  I thought that increasing this number range it will remove the error but when I open sales orders in CRM the error is still there. 
    Is there any way to remove this error message?  Any tips or advice would be much appreciated.
    Please note we've already checked the post Re: Number Range Problem and note 427289.
    Kind Regards
    JoJo

    Hi Sirisha,
    The solution depends on the exact issue you are facing.
    The CRM Sales Order is created OK, but you only see the error when you open the Sales Order?
    If this is the case, then you can follow the steps below:
    1. Find the Message ID and Message No for the error message
    2. Use Program - CRM_MESSAGES_DELETE to delete error messages from the error producing Sales Orders.
    Let me know if this is not the issue you are facing.
    Regards,
    Nelson

  • Vendor number range issue in BUCF transaction

    Hi,
    We are implementing the SRM 5.0 with Extended Classic scenario.  I my current SRM system is already connected with 3 SAP R/3 system and I am implementing and adding 4th SAP R/3 system.
    I am having an issue to replicating the vendor master from 4th R/3 system to our SRM system due to wrong number ranges in BUCF transaction code.
    Current Number Range in SRM systems are:-
    01     0010000000            0014999999     10003009
    AB     0001000000        0009999999                        X     --> (7 Digits)
    My new vendor master from 4th R/3 system is:-
    0080000001        to     0080029999    -->  (8 Digits)
    My new vendor master number range is overlapping with my internal number range 01.  As we know that we cannot reduce the lower range of 01 from 0010000000 to 0000000001.  Also I cannot increase the number AB higher value from 0009999999 to 0099999999.
    Can you any one please suggest me to correct the number range?
    Thanks,
    Senthil

    Hello Senthill,
    The vendor replication to external number ranges works as follows:-
    (1) Cross-Application Components SAP Business Partner > Business Partne
    > Basic Settings > Number Ranges and Groupings > Define Number Ranges
    Here you sould define an external number range which corresponds to
    the R/3 numbers. You may want to have more than one external range
    in order to replicate all vendors.
    (2) Cross-Application Components > SAP Business Partner > Business Part
    > Basic Settings > Number Ranges and Groupings > Define Groupings and
    Assign Number Ranges
    For each replication run, you can download the vendors which correspond
    to the external number range / grouping which is marked as 'standard
    external'.
    So, you will have to replicate your vendors separately for each number
    range:-
    Select the correct grouping each time by marking 'Ext.Std Grping'
    and then run BBPGETVD for the vendors to be assigned to this grouping.
    As standard, the customized settings for the number ranges
    would have to be changed for each run of BBPGETVD and BBP_VENDOR_SYNC.
    If you run the update or synchronization in combination with a
    BADI the intervals could be taken into account.
    The BADI is BBP_TRANSDATA_PREP
    The methods are:-
    Method: PREPARE_REPLICATION_DATA (intitial download)
    Method: PREPARE_UPDATE_DATA (update)
    Import data is stored in CT_LFA1 should be copied to an
    internal table. There the required intervals can be determined.
    This BADI is not assigned in the IMG but can be seen through SE18.
    I hope this information is helpful.
    Kind Regards,
    Edel.

  • OMX4 - FBN1 - Number range for Material document and FI document

    47 - is for FI document number range in Material ledger FBN1.  OMX4 gives number range for Material document.  My question is how big the number range must be?  Since thousands of Materials involved, I couldn't imagin this?
    Anybody knows, how to determine the size of no. ranges in Material Ledger configuration?  SAP simply says, check no. ranges whether it meets the requirement....
    I don't expect an answer again, just check your business, how many transactions would be in a period, which is not quantifiable now?
    I would like to understand this from somebody's experience of using insufficient or excessive no. ranges, especially in this area.
    Cheers,
    Ashok

    What is the number range you are using? Year Dependent or Independent?
    When you don't know the document number consumption pattern you should use Year dependent number range in both OMX4 & FBN1. Observing this for a month will give a rough Idea and observing for a Quarter will give you a fair Idea and the result for a year gives almost near to accurate consumption of number ranges.
    The generation of documents is dependent on the number of materials and Profit centers involved. As much as possibe use Summarization at profit center level when posting to FI. This will reduce the number of documents and line items that are getting generated.

  • Number range Issue for Business partners

    In our Feeder system (SAP ECC), the number ranges are over lapped for customers and vendors.
    For example  Customer master record : 100245 is for ABC customer and Vendor Master record: 100245 is for XYZ vendor.
    When these records were transferred from ECC to GTS,  both were transferred.  When searching for a business partner using external number 100245 in GTS  it pulls out two records. 
    First question:  Will this be an issue?
    Second Question: Is there any way, we can transfer Vendors and Customers which can use  different number ranges  in GTS?
    Please help.

    Hi,
    1. As soon as we consider only one feeder system overlapping number ranges is not  an issue. one external number can be assigned to two internal ones as business partners are having different roles. One as customer and one as vendor.
    2. It is not possible to be done with standard functionality as business partners have only one common number range. It would be possible to do a bit of a coding mainly renaming/renumbering within transfer user exit.
    Hope this answers your questions,
    BR,
    Gabriel.

  • BP creation number range issue in Ic webclient

    Dear Experts,
              I have been facing an issue in the creation of bp via ic webclient. there are number ranges 01, 02 and z1 made in the system, my requirement is to create bp coming in range z1. This is working fine while creating bps in sap using tcode BP.
    But while creating BP through ic webclient, the number range falls in 01. I need to change this to z1. can anyone guide me in this issue? In account identification profiles, what are all parameters need to be checked? Thanks in advance

    Hi,
    The number range for the business partner is based upon the "Grouping" that you select. In the T code: BP it might be working fine because Z1 must be set as the internal number assignment, which makes it the default grouping for the BPs created in the SAP GUI.
    In the Web UI - in the Account creation page ensure that you have the field "Grouping" displayed. The field is not avialable out-of-the-box on this page. If it is not available do the following: Hit the the config mode icon and -> Select General data viewset. Hit "Show avialable fields" and  under "HEADER" structure look for "Grouping" field. Add it to the list of displayed fields and save this change.
    Now in the General data view set you should be able to select the "Grouping" field and select the grouping that is assigned to your number range "Z1".
    Regards,
    Ramesh Nallabelli

  • Number range issue

    Hi,
    I am trying to create idoc wherein I am getting error :
    Runtime Error          SAPSQL_ARRAY_INSERT_DUPREC
    Exception              CX_SY_OPEN_SQL_DB
    I checked the details and error is at:
    INSERT EDID4 FROM TABLE LIST_CONTAINER_CREATE
    I checked the number range for object EDIDOC and it has NRLEVEL(current no) as <b>1700</b> which is same as displayed in t-code SNRO for the object EDIDOC.
    But when I debug the issue, the next document number generated in FM 'NUMBER_GET_NEXT' is <b>1500</b>.
    How's it possible?
    In debug mode, I found below code which gets the next no.
    Include LSNR3F01.
    CALL 'ThNoGet' ID 'BNRIV'    FIELD BNRIV
                   ID 'NO'       FIELD G_NOIVBUFFER
                   ID 'QUAN'     FIELD P_QUANTITY
                   ID 'PERCENT'  FIELD TNRO-PERCENTAGE
                   ID 'NONRSWAP' FIELD TNRO-NONRSWAP.
    Can somebody clarify this and help me how to solve this short dump issue?
    Also when I check EDID4 table, it shows document nos like 1800?
    How to solve this?
    Regards,
    Yogita

    HI Yogita,
    Could you post the solution for your problem?
    Regards,
    Siva.

  • Internal Number range:Issue

    Hi,
    I am using the internal number range for the employee number creation.
    Scenario:
    Suppose I have created 13 employee in the organization so far.By mistake I created the wrong employee record(Employee number 00000013).
    Now when I delete any existing employee (say "John" with the employee number as 00000013) using the Tcode PU00, I face the following issue:
    I am able to delete the record (all the associated infotypes) successfully.
    Now when I try to re-create the employee using tcode PA40, it always creates the employee wtih the next number (00000014) and not with 00000013.
    I want the new correct employee to have the employee number as 00000013.
    Can you please advise?
    Regards
    Manish

    Go to Tcode PA04
    Click the Status  Delete 0000014  Current Number make it as 000013  and hire

  • FBN1 Number range

    Hi
    My clients year end closing is this month. For the fiscal year 2011 we copied the same number range from 2010. There are 21 documents posted for a document number. But now the client wants to continue the same number range of 2010 which means the number range should be continued from 2010. Where as in 2011 we started with a number from 1. Is there any possibility to change the number range and continue from 2010. Kindly advice or if require any clarifications please let me know.
    Thank you

    Hello
    It is not possible to change the number range if the documents had
    already been posted.
    Please check the IMG activity documentation located via SPRO for
    transaction FBN1
    (The menu path is as follows; spro -> Financial accouting ->
    Financial accouting global settings -> Document ->
    Document number ranges -> Define document number ranges)
    In this documentation you will see the following information:
    "The number intervals must not overlap. If you use year-dependent number
    ranges, you can specify the same interval with the same key several
    times for different "to- fiscal years" (the limit up to which a number
    range is still valid). If you want to define number ranges which are
    independent of the to-fiscal year, enter 9999 in the to- fiscal year
    field. "
    If you also click on the F1 help of the field year in transaction
    FBN1 you will see the following definition
    sorry not to provide a more positive response.
    regards
    Ray
    To fiscal year
    Specifies when a number range interval is valid till.

  • Cin Number range issue.(capturing Excise Invoice)

    Hi guys
    I created sales cycle and after i am creating excise invoice thru tcode-j1iin
    When i enter excise group and series group and after saving it.. it is showing error message that internal number range for J_1IINTNUM
    I have maintained number range for this in tcode-j1i9..
    and i assigned this number range to billing typejexexcise invoice.
    even though error come.
    Help in this issue
    Here the error message:
    Error in allocating internal document number Interval not found Number object J_1IINTNUM

    Hi!
    Kindly check the number range maintained is as Follows ??
    No.           Year         From Number           To Number
    01     2008     0001000000     0001099999
    CIN only takes No 01, it does not recognises any other no.
    Moreover the number range should never be maintained as External Numberr range.
    Check the same and let us have the feedback.
    Regards,
    Dnyandeo H. Ainarkar

  • Fbn1 number range overlap

    hi all,
    we are updating the number range for the fiscal year in FBN1 where we are getting the error message  as ENTER INTERVALS WITHOUT OVERLAP
    no              year        from                to  
    20                  2008          2008000000                    2008999999
       20                     2009          2009000000                    2009999999
    year 2011 and  2012 2013 not used
        20                     2014          2014000000                   2014999999   here its showing the error ENTER INTERVALS WITHOUT OVERLAP
    kindly help how to solve this problem
    thanks and regards,
    chethan

    Hi
    In table NRIV, give object name as RF_BELEG, Subobject value as company code. Sort entries in ascending order of "From number" and check the overlapping entry.
    In FBN1 when you add interval use F4 for "from" field there you will be able to see non-overlapping entries and available options. If this doesn't help you to identity overlapping number range, then select any available number range, save. Then go to added number range try changing it there, when you try to save it there, it will display all overlapping entries.
    Regards
    Aniket

  • Number range issue for SD.

    Hi SAP experts,
    We have reached a point that all the number ranges [Transaction SNRO (type RV_BELEG)] allotted are exhausted/needed for the purpose to which it has been allocated. No we are in a situation that, we have no more sufficient ranges to allot to new roll-outs.Please suggest me your valuable solution for this issue.

    Hi,
    There are only two options left
    1.Create new number range object
    2.Archive the documents
    As far as possible stick to the first option.
    Reward points if helpful
    Regards,
    Amrish Purohit

  • Number ranges Issue

    Hi all,
    I want to use the same number ranges for both billing document and accounting document.
    Is it possible?
    Thanks in advance.
    Regards
    Surya

    Hi surya
    The number range you maintain for the billing document is through t.code VN01 and for the financial document it is through FBN1. If you have same number range then you can maintain
    Say for example  the number range is 10000-50000
    For billing range just check in VN01 wheather if you have the same number range(10000-50000) , if you have then assign to the billing document type
    For the financial document type also if you have the same number range (10000-50000) then you can assign to that accounting document also
    Regards
    Srinath

  • PR number range issue

    Dear All,
    While creating PR I am getting an error "Number range 01 for object BANF not defined"
    Please help
    Thanks

    Hi,
    If you are using external number range check the number range in spro for PR for the required doc type and give the number in that range

Maybe you are looking for