FBZP - Form RFFOAVIS_FPAYM is not defined or not active

Hi SAP Experts,
I need your help please...
In FBZP when i try to assign form RFFOAVIS_FPAYM from Co Code 1000 to Co Code 2000 i am getting error message as
Form RFFOAVIS_FPAYM is not defined or not active.
Co Code 1000 is of US and in Pay Method country for US PMW is used with format as ACH, while Co code 2000 is of country Canada...please tell me how to assign it

Hi SAP Gurus,
As suggested by Ravi i check in SE71 but the form is not available in Language EN. But still for the other Co Codes this form is working perfectly fine in Production.
Is there some configuartion remaining from my side. As i was working with abaper they said that some config is missing.
Kindly advice how i can assign this form to my new co code

Similar Messages

SDM Host not defined or not found

Hello all,
I have recently installed the SAP Netweaver CE 7.1 SR5 and also the corresponding NWDS.
I have couple of question on the same.
1. i did not do any POST INSTALLATION CONFIGURATIONS. - can you please help me in that, usually like SLD and other things needs to be configured !!!
2. when i try to deploy my (VERY) simple webdunpro java application- the progress information shows SDM host not defined or not found error. but still the application completes and launches the url and gives not output !!!
Please help.

Hi,
You would need to run the initial configuration wizard to configure SLD:
http://help.sap.com/saphelp_nwce10/helpdata/en/45/a3c3f043cb0cf0e10000000a114a6b/content.htm
For second issue, please check thrad:
Config SDM with NWDS 7.1 Composition Environment SP03
Regards,
Srikishan

Bootloader is not defined - facebook not showing images just text

I tried to uninstall and install a fresh installation of FF, but I still cant see images in some website including facebook, I just showing text.
I search the web and I saw that it happend to a lot of peoples but I coudln't find an answer.
it is not relevant to image block (via content tab).
whan I look at the 'Error Console' I see a lot of errors regarding bootloader is not defined and big_pipe is undifined.
please help

10x, but already check that - nothing is blocked -
the problem is relate to the bootloader, which is undefined.
one more thing - when I change the address to https I can see most of the images (but not all)

Javascript functions suddenly "not defined"

As of today, Wikidot sites have stopped behaving correctly in Firefox on my primary computer. The same pages will display fine in Firefox on another computer, so I know the problem is local to that machine.
Firebug and the Error Console tell me things like:
"OZONE is not defined"
"$j is not defined"
"$ is not defined"
This causes Wikidot pages to display improperly and some functions on them to not work at all.
Clearing the cache hasn't fixed the issue.
I tried installing Firefox 4 beta 8 on the theory it would give me a clean(er) slate to work with, but that didn't change anything either.
What else might solve this?

Did you try to start Firefox in Save mode?
*Aide > Redémarrer avec les modules désactivés…
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Sales Orgn not defined for intercompany billing

Wehn I am creating the intercompany billing from delivery company to ordering company, I am getting the error - "Sales Organization not defined", and not allowing to process billing further, but I am finding the sales organization in delivery document.
Any idea how to fix this?

> check u woul have no mentioned the customer number
> in the definition of sales org in the field
> CUSTOMER INTER COMPANY BILL;...............
> ARD IF IT IS HELP FUL
>
> KIRAN
Greetings.
Having the same problem leads me to the idea that this is the place where I am misunderstanding things.
So, I will explain my settings...
A and B are the 2 company belonging to the same group
We have: A sales to B.
Created Vendor_A(maintained for the purchase area appropriate for B - PA_B) and Customer_B (maintained for the sales area appropriate for A - SA_A ).
Sales order is registered by A for the sales area SA_A for Customer_B
Delivery is created - an interesting fact: when looking at delivery at Item details - Financial processing tab - Interco. BillSt - the space is empty and the text says "Not relevant"...
Billing using IV invoice fails with "Sales Organization not defined"...
And yes, in IMG->Enterprise Structure->Definition->Sales and Distribution->Define, copy, delete, check sales organization I have:
Customer_B entered for Cust.inter-co.bill. of the sales organization B...
Any other ideas would be welcomed...
Best regards
Catalin

PGI Error with a 'Plant not defined' message

Hi all,
I'm getting an error message while PGI of a delivery document 'Plant not defined'. Not sure why we are getting this error message in the delivery.
Any advice/info will be appreciated.
Thanks
Gopi Venkatesan

Hi,
Check In Vl02N _ outbound delivery . weither supplying plant & S. Loc assigned or Not.
If not Check the Sales Order also (VA02) supplying plant & shipping point assigned or Not.
SAM

Profit Center Hierarchy Error - profit center hierarchy not defined

in Quality client QA
0ke5, the configuration settings is not transfered from DEV through transport request.
now i have created the Profit Center Hierarchy and started process testing. Now i try to assign the hierarchy in 0ke5, error message standard hierarchy not defined in controlling area XXX.
I also try to define the Dummy Profit Center KE59, but error comes profit center hierarchy not defined.
also note that 0ke5 and 1kef are blank.

try to re-transport PCA
IMG; CO--> PCA --> tools --> transaport customizing set. -->
but i believe if you transport only the "master data" Q will function fine. ( try OKEQ first)

Error message TD427 (A text element is not defined for form J_1IEWT_CERT)

Hello,
Q> I assign the SAP script form J_1IEWT_CERT to 'SPRO=>Withholding Tax Certificates for Vendor and Customers' and was trying to see the print preveiw. But once I press printpreview button error comes "ELEMENT TITLEDET WINDOW TITLEDET IS NOT DEFINED FOR FORM J_1IEWT_CERT" and i can't see the printprview.
Same thing I tried with the copy of J_1IEWT_CERT from 000 client to ZJ_1IEWT_CERT; but same error is coming.
If i try the printpreview through SE71 it shows without error.
Thank You.

"test printing" via SE71 only prints what exists in the form. Here your form is missing TITLEDET window and element.
The print program tries to print TITLEDET but it does not exist. Could you check SAP notes to get correct versions of print program and sapscript form.

Form of address key is not defined - Message AM117-VL02N

I have defined a COA for the customer when there is a PGI for that customer.
When I do the PGI i am getting update termination error - Form of address key is not defined.
As per the message it says that TSAD3T - TITLE is not maintained. But I see the customer master it is maintained as 'Company'.
Also when I remove the Title using XD02 also i am getting the same message.
Please let me know what settings and changes i need to do for PGI to happen.

Hi,
check in customizing what form has been assigned and check the form. It sound like somebody created a form (SAPscript, Smartforms, Adobe Forms) for the billing document and there´s no window on it for the address or it has another name.

Window RUEKOPF is not defined for form ZWESCHEINV3

Hi Guru,
I have encountered an issue whose possible resolution i am not able to meet.
The issue is like this :
While performing MIGO for the Return Delivery user is successfully getting the maerial document number . But when user trying to perfor /n or anyother transaction following message is appearing (Note: For Good Receipt user is not getting any message)
SAPoffice info.
Express document "Update was terminated" received from author "User_Name".
The detailed analysis of this error message done using SM13. which is showing there is some error occured in Function module RV_MESSAGE_UPDATE
30     RV_MESSAGE_UPDATE     V1     Error (no retry)
The Update Header (ctrlshftF8) Information of this error showing details like below :
Update key      37AD64DF8023F1F1AAB2001F29E3A344
Client          505
User            408020
Date            21.05.2010 Time       09:48:39
Language        EN
Account
Report          SAPLMIGO
Transaction     MIGO
Enqueue key     20100521094825425000001277sap705..........................
Context         :E:
Information     (53) = SYNC_VB, DONT_PROCESS_AGAIN, VB_WITH_ENQUEUE, VB_ENQUEUES_RELEASED,
UD Ret. Code    9
Status          Update was terminated
Update server   sap705_P03_77
UD Client       sap705_P03_77
Local time zone CET
Time Offset     1
Error details   Class:     TD         Number:    426
Window RUEKOPF is not defined for form ZWESCHEINV3
Report     LSTXCU03             Row        101
Here i am getting error information for that particular function module that Window RUEKOPF is not defined for form ZWESCHEINV3.
Error details   Class:     TD         Number:    426
Window RUEKOPF is not defined for form ZWESCHEINV3
Report     LSTXCU03             Row        101
The single test (ctrlshftF9) in Sm13 of that particular function module shows the following error message
Window RUEKOPF is not defined for form ZWESCHEINV3
After going through the help text of the above error message I have found following
Diagnosis
The specified window is not defined in the form
I have checked the form ZWESCHEINV3 in SE71. The window RUEKOPF is present over there.
So what might be the reason for getting this error and what approach we should take to resolve this.
Thanks & regards
Saifur Rahaman

Hi,
I have gone through the OSS note you have provided.. There i can able to find that This is for error message whose TD = 427
Symptom
When you print a collective slip for areturn delivery, the update
terminates in function module RV_MESSAGE_UPDATE. *The error message is TD*
*427.*
But if you check my case
Error details   Class:     TD         Number:    426
So I would like to know how far this ossnote will helpout to resolve issue like my case
Thanks & regards
Saifur Rahaman

Windows not defined in the form

Hi
I created a zscript defining all the windows.and wrote a driver programm for the same.
When I execute the driver program ,it runs into an error sating that 'window' including main window is not defined forthe form.
Can anybody throw some light regarding this error?
Many thanks

Hi,
Please check if you have specified the name of the window in the FMs in CAPS.
Please check if your form is checked and activated.
Here is a sample code
CALL FUNCTION 'OPEN_FORM'
EXPORTING
   FORM                              = 'ZSAPSCRIPTS'
EXCEPTIONS
   CANCELED                          = 1
   DEVICE                            = 2
   FORM                              = 3
   OPTIONS                           = 4
   UNCLOSED                          = 5
   MAIL_OPTIONS                      = 6
   ARCHIVE_ERROR                     = 7
   INVALID_FAX_NUMBER                = 8
   MORE_PARAMS_NEEDED_IN_BATCH       = 9
   SPOOL_ERROR                       = 10
   CODEPAGE                          = 11
   OTHERS                            = 12
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
LOOP AT T_BODY INTO WA_BODY.
CALL FUNCTION 'WRITE_FORM'
   EXPORTING
     ELEMENT                        = 'MAIN'
     WINDOW                         = 'MAIN'
   EXCEPTIONS
     ELEMENT                        = 1
     FUNCTION                       = 2
     TYPE                           = 3
     UNOPENED                       = 4
     UNSTARTED                      = 5
     WINDOW                         = 6
     BAD_PAGEFORMAT_FOR_PRINT       = 7
     SPOOL_ERROR                    = 8
     CODEPAGE                       = 9
     OTHERS                         = 10
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'CLOSE_FORM'
EXCEPTIONS
   UNOPENED                       = 1
   BAD_PAGEFORMAT_FOR_PRINT       = 2
   SEND_ERROR                     = 3
   SPOOL_ERROR                    = 4
   CODEPAGE                       = 5
   OTHERS                         = 6
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

VF02 - Error in Outbound Idoc - "Form of Address Key is not defined"

Hi,
While processing the outbound idoc in VF02, i am getting an error "Form of Address Key is not defined".
Our system has been recently patched.
While processing the idocs in VF02 (for the invoices created earlier to the patching date), there is no error & the Idoc gets created.
I am not sure why i am gettting the above error now (that is after patching).
Please let me know if i am missing something here / is it because of the patching.
thanks & regards
Narain

Check Note 1002015 - RBT_ENH_VB7: Incorrect message display (AM010, AM117)
thanks
G. Lakshmipathi

Bind variable is not defined

Hi, it is my first attempt to modify a rdf file.
I run into a problem while trying to add an additional user parameter in an existing rdf file. While I am successful in adding a new FREQUENCY user parameter and I am able to update the form to show this new parameter, I am not able to run the report.
I have updated the SQL query in the report editor, under data view to use this new parameter :FREQUENCY. (select ... from table where frequency= :FREQUENCY) There was no error here.
Whenever I run the report, I will always get an error saying:
"REP-0730: The following bind variable is not defined: "(nothing behind this error message)
The program will have a memory error and it exits itself.
I had tried many methods trying to solve this problem to no avail.
I am using Oracle 9i Reports Builder 9.0.2.0.3.
I would appreciate any help given on this matter.
Thank you :)
Message was edited by:
Leion

In Object Navigator Under Layout ->User parameters are you able to see your bind variable FREQUENCY?

Payment order are not defined for extended withholding tax

Hi Gurus,
Would you please help me with the message below. It appears on F110 when I try to pay a vendor open item with extended withholding tax:
Message FZ626 -Payment orders are not defined for extended withholding tax
In my company payment orders are created in F110 for accounts payable, as we use another ERP system (Baan) to perform the local accounts payments, and now I've just activated Extended withholding tax functionality With accumulation (necessary in Brazil) but I get this error.
Is it not possible to user payment order with extended withholding tax + accumulation? I find it hard to believe...
I've tried to unflag the payment order only for the payment method I'm using in FBZP t.code, but then no payment order were created but instead a payment document were posted with the withholding tax accumulation, but this is not the way we are working, and nothing is sent to Baan
any help is welcome

The payment method "Y" the option "payment order only" was marked?
For a withholding tax type with accumulation in a company code with extended withholding tax payment
methods that create only payment orders can´t be used. Payment orders can only be created only if there are
no tax types with accumulation involved in the paid items of the payment run.
The functionality extended withholding tax works fine for Brazil
however, you can´t use the payment order with this functionality.
Please, review your customizing for payment method 'Y" in transaction
FBZP.
Best regards,
Leonardo Vedovelli
FI Support Engineer
SAP Active Global Support

How can I use the "EvalScript()" function? I am trying to send text to a Director app from the web browser, but the console in the browser just responds "Uncaught ReferenceError: evalScript is not defined ".

I am trying to control a Shockwave app form another machine, using "Pusher" service (websockets), and everything is ok so far; but when I try to send the shockwave app the text recieved from another machine, using the "EvalScript()" function (as documented), I only get the message "Uncaught ReferenceError: evalScript is not defined" in the browser's console. What am I doing wrong?
'm using the following script in the webpage where the shockwave object is located:
<script type="text/javascript">
    // Enable pusher logging - don't include this in production
    Pusher.log = function(message) {
      if (window.console && window.console.log) {
        window.console.log(message);
    var pusher = new Pusher('abc963cf3e6g678879e');
    var channel = pusher.subscribe('Galileo_channel');
    channel.bind('Galileo_event', function(data) {
      evalScript(data.message);
alert(data.message);
</script>
The "alert" is working fine, but I can't get JavaScript to recognize the EvalScript (I even tried calling the shockwave object, ie: "extev01.evalScript()", since the object's ID is extev01, but it doesn't work, either).
Help!

Thanks Sean.
I tried your suggestion first, using getNetText to poll the server and read a text file. The drawbak is that I had to poll the server constantly, since I could not know in advance when the text file was going to change (and it's not practical to stump the server and connection).
I've kept trying the EvalScript, asigning the Shockwave object to a variable first, then calling the EvalScript() in the object, but it doesn't work, either. I think I will simply use JavaScript and forget about shockwave altogether, since everything is working fine up to that point (although it would be nice to be able to use Lingo for the rest of the app).

FBZP - Form RFFOAVIS_FPAYM is not defined or not active

Similar Messages

Maybe you are looking for