FC 6 and digitech RP 250 sound filter compatibility problem

I just bought a digitech guitar RP 250 muti-effect processor (http://www.digitech.com/multieffects.php), I have downloaded and installed the ad-hoc processor software for this processor (X-edit) which works fine with in my apple computer. However, I also have _Final Cut Pro for Apple that crashes immediately _when opening since I installed the RP250 software. I am sure that is related to the RP250 software because is _at the moment that Final Cut is showing the message "installing sound filters RP250" that the crash takes place_. The problem was also reported by another user (but not solved) in this page: http://discussions.apple.com/thread.jspa?threadID=1410799&tstart=-3
1. What is the a way to avoid this compatibility problem and allow the two programs to coexist?
2. I have desinstalled X-Edit 2 and reinstalled final cut, but after that Final cut keeps crashing at the moment of showing "loading audio filters RP 250", suggesting the drivers have not been completely uninstalled(?). This makes the problem extremely serious as I cannot use Final cut at all.
Thanks in advance for your help,

This is the reply I received from Digitech, which actually works!!!
+Our guess is it could only be related to the RP250.component. If you remove this from your plug-ins folder, our guess is it will fix the problem. This could be in one of two locations:+
+HD/Users/user name/Library/Audio/Plug-ins/Components+
HD/Library/Audio/Plug-ins/Components
Regards,
+Digitech Support+
This still leaves one of my questions open though, how to keep FC and the RP250 soft working together...

Similar Messages

New site, and I am having some ie compatibility problems

We used Dreamweaver CS5.5 to create a site. Everything works great in all browsers except ie9. The image in the middle of the "about" page is at the bottom of the page instead on to the rright and in the middle (top to bottom), and if you click compatibility mode, the image moves to the correct position but we lose all our headers.
I know it has to either be a simple hack I need or my code is off, but when I run WC3 validation, the few errors I have (which I am working on) don't apply, and if I run the browser compatibility check, again, none of the listed items applies to these issues.
Any help is greatly appreciated.
View site here.

David, thank you! That worked for the image! I appreciate it so much. Now....not to be greedy, but you wouldn't happen to know why my header-tagged text disappears when compatibility button is clicked in ie? Again, don't mean to be greedy...
Or anyone else?

PSE 12 and Premier Elements 12 Sound Card Compatibility

Specs say need a Direct X 9 or 10 sound card or one that is compatible. Is DTS sound+ card compatible? Found a Windows laptop on a Black Friday special that meets all the other requirements but can't find an answer about the sound card. Hope someone has a quick answer since the sale on the laptop ends tomorrow. Thanks.
And now I know thre answer to my question. After almost an hour on the phone with HP, I know that the sound cards are compatible--the tech that helped was really great and ended up running around their call site to check with other tech reps to find the answer. Apparently not a very common question, since before I submitted my question here, I had talked with Best Buy and the tech I spoke with there didn't have the answer.
Thanks to all who stopped to look at my question.
Message was edited by: Marti I

if you downloaded the premier elements 12 install file, search for recent files.
if you can't find it, redownload it.

HT3835 Final Cut Studio 2 and OS X 10.6.8 compatibility problems ?

Is Final Cut Studio 2 compatible with OS X 10.6.8 ?
I am using a Mac Pro
2 X 3 GHz Dual-Core Intel Xeon
Could not mount Final Cut Pro which I own.
Thanks everyone
Camerio1

Did you do a clean install of OS and then try installing fcs?
Here's a user tip describing best practices for OS and fcp install and upgrades
https://discussions.apple.com/docs/DOC-2861

I am trying to record a from my Macbook Air and an annoying loud sound, like a burp, will suddenly erupt from the MacBook, necessitating I start again. Any ideas on how I may stop this, or what it is??

I am trying to record a meditation from my Macbook Air and an annoying loud sound, like a burp, will suddenly erupt from the MacBook, necessitating I start again. Any ideas on how I may stop this, or what it is??

Click on the blue Internet Recovery in nbar's post. That is a link to what computers can run Internet Recovery.
Do a backup, preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
OS X Recovery
OS X Recovery (2)
When you reboot, use Setup Assistant to restore your data.

Reports that it is absent plagin and there is no sound into safari when you open site.

Reports that it is absent plagin and there is no sound into safari when you open site.

And what site would that be?

On line banking for another person, my Mom, who I have power of attorney for heard ppffzzzttt while inputting Mom's sensitive id info in while trying to log in again? I've had the iPad 3/ 4 & 4.5 and never heard this sound before.

I tried to access my Mother's bank for online banking. She has had a slow decline with dementia, I'm Power Of Attorney for her. When not being able to sign in, I heard through the iPad 4 Wi-fi 64 gig, a measured buzz sound, like ppffzzzttt. I've had 3 / 4 & 4.5 and never heard this sound before.
I have had Power of Attorney for my Mom for quite some time. She has been suffering with dementia in a slow then sped up type after her last heart attack. I was the worst candidate for the job but no one else would take it.
I set up banking on line so I could pay her bills. I am disabled and have trouble paying my own. The iPad again filled those shoes perfectly.
I logged on yesterday, and the page said, user name not found. I figured it might have been server maintenance or poor typing but even with all personal details the server would not send my user name.
I became concerned because today I received the Vudu letter that said their headquarters were broken into on March 25th, 2013, and a number of hard drives were stolen with all info they keep on me. They set up an all clear id free of charge for a year, if I wanted to take advantage of it which I did.
The part that bothers me is when I was inputting my Mother's sensitive id information my iPad 4 / Wi-Fi / 64 gig emitted a measured buzz sound 3 times. I have had the 3 / 4 / 4.5 / faster processor but did not go for the 128 gig 4.75, and in all that time I have never heard that sound.
The question, was the bank computer or the FBI probing my iPad 4 and did it place something on it in the memory or damage it in anyway.
I was on the phone for the next three hours with the good, bad and ugly at Citizens. After talking to an acquaintance bank manager who said she saw no problem and did not know why I could not log in. I spent the next three hours on the phone and ended up talking to a nasty tech who said, it was a rule that I could not do my Mother's banking on line anymore. A "rule" prevented me from acting in that manner. It all, from every party sounded so "hinky," Don Johnson, Miami Vice and wondered if there was a rule at all.
I asked him why and what triggered the on line banking system to suddenly boot me? The fact I had set it up about one year ago to date and it has performed flawlessly since that time and a whole year later it flagged the account. He said it could have been anything, pressing the wrong key, etc. I knew he was getting edgy so I ended up getting off the line with him because nothing would be accomplished.
I would appreciate any and all speculations, ideas, or suggestions as I look over banking law, rules, in the next few days. By the way, the money we are talking about is miniscule. A small SS check and an even smaller pension check.
Thank you,
halfcack

That situation went from inconvenient to complicated quickly. Wait for any pending orders to drop off, wait for things to clear up, wait till your upgrade comes up and then upgrade when your contract is fulfilled. I would have suggested a replacement phone, I know, with only a month left why couldn't you just upgrade early, but these situations where people try to upgrade early always end horribly and once a phone order starts, it almost cannot finish until something winds up shipped received and returned. Sorry this happened the way it did. Definitely not efficient.

I would like to see and access the correct sound patches from my E-mu mps orchestral plus from inside of logic express.

I would like to see and access the correct sound patches from my E-mu mps orchestral plus from inside of logic express.
Right now , I have access to some of the sound files but most are missing and all are incorrectly labeled.
Is it possible to ("Library") these sound files or access them from logic?
Thanks
J

HI,
I'm not quite sure who you think you are addressing here with your idea but this is a user to user forum. Apple don't come here.
If you want to offer ideas or feedback to Apple, it would be best for you to do it here:
http://www.apple.com/feedback/logic-pro.html

My old 1st gen ipod touch wont turn on and makes a clicking sound when I plug it in.

My old 1st gen ipod touch wont turn on and makes a clicking sound when I plug it in. The ipod doesnt turn on when I plug it into the wall, even if I let it charge, and itunes won't recognize it. I have tried to reset it with the home and power buttons. Whats wrong and how can I fix it? I think it might be the memory or the battery. What could the clicking sound be related to? Thanks

Try placing the iPod in recovery mode and then try restoring the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
After that I would make an appointment at the Genius Bar of an Apple store.

I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drvie to die before i use the other drives

I have two hard drives on my mac 10.5.8 power pc and hear the clickking sounds of the first hard drive and think that it may be dying, can I install everything on the other hard drive also and wait for the first drive to die before i use the other drives? Or, what is the best way to handle this?

I do not know what you are waiting for.
I'd make a backup of your important stuff before cloning the entire disk.
Carbon Copy Cloner will copy your startup drive to an external firewire drive. You can boot from the external drive to verify that you have a good clone. When you upgrade your existing startup drive, you can at any time boot from your external drive and go back to your existing system.
http://www.bombich.com/software/ccc.html
SuperDuper is the wildly acclaimed program that makes recovery painless, because it makes creating a fully bootable backup painless. Its incredibly clear, friendly interface is understandable, easy to use, and SuperDuper's built-in scheduler makes it trivial to back up automatically. And it runs beautifully on both Intel and Power PC Macs!

On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?

On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?

I have find the codec installed on my PC do you see an undesirable one I have highlighted the one that seems strange should I uninstall how can I do this safely
Daniel
Codecs audio
Type
Nom
Format
Binaire
Version
ACM
Codec Microsoft IMA ADPCM
0011
ACM
CODEC A-Law et u-Law Microsoft CCITT G.711
0007
ACM
Codec audio Microsoft GSM 6.10
0031
ACM
Codec Microsoft ADPCM
0002
ACM
Fraunhofer IIS MPEG Layer-3 Codec (decode only)
0055
ACM
Convertisseur PCM Microsoft
0001
DMO
WMAudio Decoder DMO
0160, 0161, 0162, 0163
WMADMOD.DLL
6.1.7601.17514
DMO
WMAPro over S/PDIF DMO
0162
WMADMOD.DLL
6.1.7601.17514
DMO
WMSpeech Decoder DMO
000A, 000B
WMSPDMOD.DLL
6.1.7601.17514
DMO
MP3 Decoder DMO
0055
mp3dmod.dll
6.1.7600.16385
Codecs vidéo
Type
Nom
Format
Binaire
Version
ICM
Microsoft RLE
MRLE
msrle32.dll
6.1.7601.17514
ICM
Microsoft Vidéo 1
MSVC
msvidc32.dll
6.1.7601.17514
ICM
Microsoft YUV
UYVY
msyuv.dll
6.1.7601.17514
ICM
Codec Intel IYUV
IYUV
iyuv_32.dll
6.1.7601.17514
ICM
Toshiba YUV Codec
Y411
tsbyuv.dll
6.1.7601.17514
ICM
Codec Cinepak de Radius
cvid
iccvid.dll
1.10.0.13
DMO
Mpeg4s Decoder DMO
mp4s, MP4S, m4s2, M4S2, MP4V, mp4v, XVID, xvid, DIVX, DX50
mp4sdecd.dll
6.1.7600.16385
DMO
WMV Screen decoder DMO
MSS1, MSS2
wmvsdecd.dll
6.1.7601.17514
DMO
WMVideo Decoder DMO
WMV1, WMV2, WMV3, WMVA, WVC1, WMVP, WVP2
wmvdecod.dll
6.1.7601.18221
DMO
Mpeg43 Decoder DMO
mp43, MP43
mp43decd.dll
6.1.7600.16385
DMO
Mpeg4 Decoder DMO
MPG4, mpg4, mp42, MP42
mpg4decd.dll
6.1.7600.16385
De : sarika02
Envoyé : 17 juin 2014 19:26
À : Daniel Cloutier
Objet : On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
On photoshop element 12 when I open a .MTS file I have the sound with a black screen if I open a .mov it work fine I have uninstall and reinstall I still have the same problem can you help?
created by sarika02 <https://forums.adobe.com/people/sarika02> in Photoshop Elements - View the full discussion <https://forums.adobe.com/message/6466796#6466796>

Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem

My XP machine crashed, I reinstalled Premiere Pro 2.0 with Windows 7, and I got the following error: 'The Currently installed soundcard driver does not support Direct Sound Input. Recording audio is not possible.' The soundcard drivers are updated. Any ideas? Here's what I have: AMD Phenom II X4 965 Processor 3.40 GHz 8 GB, 64 bit. Thank you for looking.

Thanks! Though I upgraded to solve the problem, this is good to know.
Bob
Date: Wed, 9 Nov 2011 04:45:42 -0700
From: [email protected]
To: [email protected]
Subject: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem
Re: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem created by Steve-Italy in Premiere Pro CS4 & Earlier - View the full discussion
VERY VERY VERY EASY (now, when I solved the problem, not before...!!!)
Insert Micropone or any jack in Micropone Input or Aux Input, on your sound card or motherboard !
AND NOW YOU CAN USE PREMIERE PRO 2.0
Enjoy
Steve - Italy
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4015730#4015730
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4015730#4015730. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Pro CS4 & Earlier by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

I have just upgraded to 10.8 on my macbook pro and now I can't access itunes, videos and there is no sound - anyone help?

I have just upgraded to 10.8 on my macbook pro and now I can't access itunes, videos and there is no sound - anyone help?
It is an old macbook pro probably 6yo with the back lit keys - not under applecare anymore obviously. I downloaded the upgrade last night which took quite a while longer than it should have.
Anyone else experienced this and can suggest something? many thanks Jo

Run Software Update, wait till all the updates have finished downloading then restart the mac.

Does anyone know how to access the sound software on a Mid 2010 Mac Pro? I have a Logitech Z906 5.1 surround system with fiber optic in and out, I only seem to be able to get stereo and simulated 5.1 sound .

A mid 2010 Mac Pro, trying to get 5.1 surround out of the onboard sound software using fiber optic out connected to a Logitech Z906 5.1 speaker sys. with fiber optic in and out, all I get is stereo and simulated 5.1 sound out of the speakers. In utilities, Audio Midi Setup I can't get the Mac to see the Logitech speakers for 5.1 speaker configuration. Without being made to feel like a dummy, does anyone have a solution? Thanks, Carl

Hello John, I figured it was a signal issue. All the speakers fire and the sound is great. I was running the speakers thru a Dell PC with a Creative X-Fi Elite Pro, THX Certified, 7.1 soundcard using a fiber optic from the Mac Pro to the Z906's, it worked great until the Dell died!!! When I bought the soundcard from Creative I also bought the GigaWorks S750, THX Certified, 700 watt, 7.1 speaker system, used the speakers for 11 years and then the woofer/amp said "I QUIT" Creative quit making the speaker system and the sound card. The satellite speakers from the Creative GigaWorks speaker system still sound great (rated at 78 watt each) and are a little better speaker than the one's that came with the Z906 and the wattage from the 906 is sufficient to drive the satellites without any distortion. Thank you for addressing my issue, you confirmed what I suspected all along, just needed to hear it from someone with the same setup.
One last question, I purchased a Diamond Multimedia USB Soundcard, can't use the fiber optic(not supported by Mac) but the green, tan and black RCA's plug in and produces adequetly. When you plug your 906's into the Mac Pro using the fiber optic how do you set your speaker configuration? When I plug into the mac pro with fiber optic the 'Audio Midi Setup' does not seem to see the 5.1 configuration. Any thoughts there?
Carl

Where to locate and how to use the filter thershould to binarized image

Good morning friends. I am using
Labview with VDM and let me know where to locate and how to use the
filter thershould. Also that parameters used to binarized image captured
via webcam and display it in black and white.
Thank you very
much.

Is the image that you are getting a RGB one? Use color plane extraction and then use a binary threshold to convert it into a binary image. You can also directly use a color threshold and convert a rgb (color) image to a binary image.

FC 6 and digitech RP 250 sound filter compatibility problem

Similar Messages

Maybe you are looking for