FC STUDIO 2 PRO 6 (installing question)
I have an MacBook Pro 17' and I have 80 GB of HDisk left. I was thinking to install FCS2 on my MacBook Pro but I want to know first how many GB's of my HD take to install FCS2. ???
Any help please.
FCP is relatively small. All of the applications in the studio suite are very small, under 2 gigs total, It's the additional content and templates that chews up space, 20-30 gigs, divided equally, more or less, among the apps other than FCP. You have options to instal what you want or need.
bogiesan
Similar Messages
-
Hi,
So I have two Hard Drives, one running 10.5.7. and the other one 10.3.9. I still keep the 10.3.9. cause I'm using Pro Tools 6.4 and have a very good setup. The question is that I want to try to install Pro Tools 8 on the Leopard HD but am wondering if it might cause any conflicts with the older version, even if it is on a different HD. I'm worried it might bring some problems and don't want to risk messing up with the config I already have (plugins and all). Does anyone have experience with that? Thanks.
It's Pro Tools LE with Mbox 1.
Best,
D.Cami87,
which model MacBook Pro do you have, and which version of OS X is installed on it? -
i made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed m icrosoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates? does hot fix of microsoft i.e, " support.microsoft.com/kb/979491" helps in stop freezing in dual boot mechanism?
Windows has a software updater built into Windows and when you install the Boot Camp drivers then it will install an Apple software updater also. I believe Windows is set to automatically download and install your updates as does the Apple software Updater. They both will update the individual files it needs to periodically.
"Microsoft updates" and "Windows updates" are basically the same thing in Windows. Are you talking about the "Windows support software" when downloading from Boot Camp Assistant? Apple installs a software updater for it's Boot Camp drivers in Windows 7 so you can do it manually or automatically.
The "Hot Fix" your referring to is only for certain motherboards built from other Windows only computer manufacturers and does NOT pertain to any Apple computers.
If you have a problem with your computer then it's best to ask a specific question so we can help better. -
I'm looking to buy a new Macbook Pro, and have questions about the Applecare extended warranty?
I'm looking to buy a new Macbook Pro, and have questions about the Applecare extended warranty? I want to know if the 3 year extended warranty covers what damage. Like water damage, accidental damage, lost or stolen macbook, manufactory defects, or any other kind of damage, maybe be even cosmetic damage. Can anyone help me?
If you are talking about features of the MBP itself, as long as you are not looking at the Retina models, then the memory you can upgrade yourself for a lot less than Apple charges, and that does not affect the warranty as Apple considers memory a user permitted upgrade. Great sources are Crucial and OWC, both are Mac specialists and have on-line videos on how to do the install.
If the 15" is what you are looking at, a good upgrade is the 7200 rpm hard drive, gives a little better performance over the standard 5400 rpm drive.
The Hi Res screen is good if you do a lot of graphics work.
Comparing the 13" amd 15" you will notice the 15" has a second, discrete graphic processor...helps when you get into heavy duty videos, games, graphics...but keep in mind that kicking in the second processor uses a lot of power and will run the battery down faster.
If you are looking at the Retina models, then keep in mind there are no post-purchase upgrade options...you have to buy with everything you want at the start.
Just some thoughts. -
Where does Logic Pro 7 install plug-ins?
Apologies, but I cannot find the answer to this question. Thanks in advance for any help!
Where does Logic Pro 7 install plug-ins by default on the computer? I have searched all through the Macintosh HD Library and with Spotlight to no avail.Logic (and most other DAW host) applications deliberately do not make their plugins phycially separate AU (or VST) plugins that get installed in the Compononets folder. They do not want you to be able to use then with any other program. They are "inetgrated" into the code, and so not usable outside the app. Or the idea is, you don't get the plugins unless you buy the host program (and it is also a way to lock you into using their DAW software).
There was once I think talk of making some Logic plugins available as a 3rd party package, but that may have been before the Apple acquisition. So if you want your work to be portable to other DAW programs, then you are better off not using any of Logic's built-in plugins (and other 3rd party plugins do what Logic's plugins do, often better, though obviously you must pay for 3rd party plugins).
http://web.mac.com/postfader -
Using Digi 003 interface with Logic Studio or Pro
I currently have a modified (Black Lion Audio) Digi 003 Rack interface that I use with Pro Tools, but would like to get Logic Studio (or Pro). I have heard 50% say that the Digi 003R or Mixer won't work (properly) with Logic and I have heard another 50% say that it works fine. Can somebody please end this debate once and for all, so I can make the big $500-$1000 decision. I'm really itching to get Logic so I can use all of its great features. I would like to hear that it works fine, but if not, I'd rather know the facts before wasting my money. Thank you to anybody who can put this question to rest.
Lets clear up some things - Logic Studio comes with Logic Pro. . . so that's $500. Logic Pro 7 is old and you don't need it anymore, it WAS $1000. So, no need to spend a grand on Logic.
Next, 003R works absolutely fine as an interface with Logic. The mixer won't work as a control surface (although it will work fine as an interface) because Digi's control surface stuff is proprietary and isn't made to work with Logic.
So, to sum up - Logic Studio is Logic Pro 8 and a ton of other apps and its only $500.
003 Rack works fine with Logic. -
I did not deactivate a photoshop cs6 before there was a new "C" hard drive installed on my computer and a Win7 Pro fresh install too. How can I activate photoshop on the new hardware if I can't deactivate it on the old hardware that is no longer available? Any help will be appreciated.
If it's the same machine (same CPU) there should not be any need to activate. The actiovation is tied to your CPU.
If you run into problems, then:
Unfortunately, only Adobe customer service can assist you with your issue. These are user forums; you are not addressing Adobe here.
Click on the link below, and after that click on "Still need Help? Contact us."
Then on the next page, click Chat
There is also a phone option. 1 (800) 833-6687
http://helpx.adobe.com/contact.html?step=PHXS_downloading-installing-setting-up_licensing- activation -
I partitioned my MacBook Pro and installed Windows 8 in it.....now I can't find my partition when I pressed option key when booting up.....so how can I do to find the partition to boot...I can see it in the disk manager in Mac....any ideas? thanks..!..
Hi LamboMong,
just try this:
http://refit.sourceforge.net
install, reboot twice and choose the Windows-Partition on next startup.
(The apple-bootloader doesn't display all bootable harddisks.
With rEFIt you can boot from all partitions/harddisks on your computer.)
I hope that will solve your problem.
Daniel Fernau -
Mavric doesn't support my 5 years old Big Screen Display, OR? Tried to connect my Mac Book Pro after installing Mavric, The Screen didn't work as before. I could only see the Desktop but not the movies for example.
<E-mail Edited by Host>It appears what happened is the installer though it was looking at a empty drive and just went ahead and installed.
I of course am assuming here you didn't use Disk Utility to format the drive first before installing, that would wipe out your files and programs for sure.
So what to do, what to do.
Well there is hope for you as long as the drive wasn't Filevaulted.
I'll explain. When a hard drive writes data for the first time to a drive, it starts at the very top and works it's way down.
When OS X was installed the first time, it was at the top of the drive, unless you upgraded then the upgraded OS X could have been written elsewhere.
Now when you just reinstalled OS X, the new OS went on the top of the drive, overwriting any data that was there previously, so what was there you have lost forever which is about 8GB or so. If it was the previous OS there, then your more in luck because only the old OS X was overwritten.
The remaining space on the drive still can have a copy of your files, provided it's not overwritten yet.
It's because when a hard drive deletes data or reformats, it doesn't remove the data off the drive or overwrites it immediately, it's just made so it's SPACE is available for new files to be written there.
So technically one can recover the deleted data off a non-encrypted/scrubbed hard drive with special software.
The way it does this is it reads the 1's and 0's of the files themselves, and through a lot of figuring out, can tell what that file is and what it belongs too.
So what you will have to do is this:
Create a data recovery/undelete external boot drive
or if you don't have the skills, then take it to a local PC/Mac tech and they can do a direct image of the drive and then you can run Data Rescue on it to rebuild your files. -
I don't know if this is the right section but I experience the following issue with Adobe Acrobat Pro XI installed on Windows 8.1. When I start Acrobat the related window opens normally but, after some scroll up and down along the document, it blocks, Acrobat doesn't respond to any command I can give and, in place of the pointer arrow, a vertical bar, as the one of the text editor appears. The only way I can stop Acrobat is by means of the task manager. I tried to de-install and the re- install Acrobat but the behaviour is always the same. What can I do??
Have you opened Acrobat and gone to Help>Updates to get an updated install?
-
I've lost the use of Appleworks by upgrading to 10.9.2.
Is it possible to partition the internal hard drive of my MacBook Pro and install an older Mac OS (10.6.8) on the second partition with OS 10.9.2 on the other? I'd like to be able to boot to the older OS when I need Appleworks and few other applications that aren't available on OS 10.9.2.
Any suggestions?
Thank you for your help.Hello again, WZZZ,
Here's an update. I was successful in creating two partitions on my internal drive, and in installing OS 10.6.6 on the second partition, as per your guidence. I now have it up to 10.6.8 with all the security updates and AppleWorks. A great thing.
Some thoughts:
• The partitioning had one hitch; it failed at first. But once I "repaired" the disc with Disc Utility the partitioning went thru.
• The partitioning took a long time in 'resizing the partition.' A few hours I think it was. Lots of progress bar watching.
• If I had it to do again, I'd size the two partitions differently. My original data was occupying about 230 Gb of the 320 Gb disc. I made the new partitions share the space, about 230 and 75Gb. That left very little available space for the main disc. I ought to have put some breathing room in there. As it is, it's an incentive to clean up all those files, especially all those iTunes files. I now have about 10% of available space there and mean to continue deleting.
So, all in all a good project that got me where I wanted to go. Thank you for your help.
Appreciatively,
wallah -
i made a dual boot of windows 7 and mac os x lion in my macbook pro .i installed m icrosoft support software also. now, can i install windows updates? do i turn on the automatic updating of updates?
yes you need the updates and patches.
Only some of the drivers that Windows will automatically install at times
and always make sure to insure it is using restore points
do all the maintenance andsuch as normal
use MS Security Essentials for AV is really top notch
Clean disk space
Use WinClone new program to inisure you have a restore image -
At first, my macbook couldn't start up. It only displayed apple logo with a spinning wheel on grey screen for hours and hours. Then I decided to reinstall the OS. I tried so many times to install but the installing time said thousands of hours remaining to complete . I left the computer for days but it didn't install OS. I tried that connecting the Ethernet cable as well but it didn't work. Then I took out all my important files by connecting it to another macbook and formatted the hard drive. Then tried to install OS again. But still didn't work. I checked on you tube and changed the hard drive cable as well. Still didn't work. I cannot install OS X Lion on my MacBook Pro. Installing time is in negative hours. (-2,147,483,648 hours). Seriously looking for help.
If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
Adobe Acrobat X Pro Is Installed but Not Working
I installed Adobe Acrobat X Pro about a year ago. It has never worked, and I'm just now getting around to trying to fix it. When I try to open a PDF document with the program, it brings up a window that asks if I'll allow the program to make changes to my computer. I click "yes," and the window goes away, but then absolutely nothing happens, the document never opens, and I have to open it with Adobe Reader instead.
I'd like to be able to use the program that I paid for.
What can I do?
Thanks.you should open the directory where adobe x pro was installed. find Acrobat.exe, right click it>click "run as administrator".
if that fails, fun the acrobat cleaner: http://labs.adobe.com/downloads/acrobatcleaner.html
restart your computer
reinstall acrobat x pro. -
No audio Mac Pro after installing OS 10.7.5 Update 1163
No audio on Mac Pro after installing OS 10.7.5 Update 11G63. Tried uninstalling iTunes Dock Notifications but it wasn't installed in the first place. No Audio on iTunes, youTube, Chrome, etc.
Hello Howard,
Thank you for using Apple Support Communities.
You can use the following article to sort your your audio issues on your MacPro:
Troubleshooting issues with no audio from built-in speakers on Macs
Regards,
Jeff D.
Maybe you are looking for
-
How can you pull in pdf's from iBooks and bring them into the Box app?
How can you pull in pdf's from iBooks and bring them into the Box app?
-
Can I use an Mac Mini without a monitor?
I'm using a Mac specifically to develop a mobile app, and the intention was that once everything was set up, I could just TeamViewer in to take control without needing a monitor. This works fine with a monitor plugged in, but when I disconnect the mo
-
All of my downloaded apps will not open, how do I correct this? The same thing happened a few days ago, but when I received an alert from the sport app, all the games opened up and I could use them. This morning they are all closed again. Everything
-
OIM 11g high availability - is LDAP required for Weblogic credential store
Hi all, Trying to understand whether we need an LDAP in an HA architecture with [OIM/SOA] - [OIM/SOA/Admin]? The HA guide: http://docs.oracle.com/cd/E14571_01/core.1111/e10106/imha.htm#CDEFECJF Does not mention this requirement, in fact it specifical
-
Aperture does not import Nikon JPG files when RAW and JPG
I own a Nikon D2x that I download files to a Sony 40GB portable HD. When I shoot in RAW + JPG only the RAW file is imported when I connect the Sony HD to my Mac and import to Aperture. If I open the Sony disk Icon on the Desktop, I can see both the R