FC Studio Reinstall Problem

After completing some larger projects I upgraded to Leopard on my 2 processor Dual Core Mac Pro. Now my FCP screen (when it shows) consists of just some window frame lines (like title safe in the Viewer) and almost nothing else. I have dual Mac 23" monitors and the ATI X1900 card.
So I'mtrying to reinstall. I've removed every FCP Studio application by using AppZapper. Also looked through the libraries and removed those relating to FCP Studio apps as well.
But when I run the FCP Studio 2 install disk it gives me options to install everything except for FCP, which it indicates is already installed. What files am I missing that have to be removed before I can reinstall FCP?
I did go ahead with the install, and of course there is no FCP on the computer. Every other app is there and is working correctly, except for Motion, which crashes on launch. It indicates that the problem might be with the ozone plug-in, of which I have no knowledge and can't find.
Got work to do, and can't do it! Any help would be much appreciated.
Thanks!
Martin Reuben
<edited by host>

Trashed the prefs for Motion and it's working fine now. But I still can't install FCP.
Can anyone help? I'm afraid I'm going to have to reinstall my entire system and I REALLY don't want to do that.
Thanks!

Similar Messages

DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location

DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location?

Thanks Shane I followed your instructions and it turned out pretty well. One quick question, Im working with DVD Studio Pro 4, how do i implement a theme into my project? I cant even fin where thay are located. Thanks.

Very Strange Logic Studio Installing Problem, please help !

Hello .
I wanted to install Logic Studio 9 on a brand new imac and somehow installation was failed .
Than i erased what ever i could which was left from the failed installation .
And now i am trying to reinstall, but this time Installation is not asking me Audio Content 1, 2 and 3
And also after Jam Pack 1, instead of continuing to 2 and 3, is asking to put install disk , and after that point installation getting failed again .
So far what i erased after failure was (only the ones i could find out of this list )
Application Files
/Applications/Compressor
/Applications/Logic Node
/Applications/Logic Pro
/Applications/MainStage
/Applications/Soundtrack Pro
/Applications/WaveBurner
/Applications/Utilities/Apple Loops Utility
/Applications/Utilities/Impulse Response Utility
Factory Settings, Instruments
/Library/Application Support/Logic/
/Library/Application Support/Garageband/
/Library/Application Support/Garageband Content/ (Legacy)
/Library/Application Support/Soundtrack Pro/
/Library/Application Support/WaveBurner/
Impulse Responses
/Library/Audio/Impulse Responses/
Receipts
Receipts can vary quite a bit depending on your system. Try to find all those that look like the following:
/Library/Receipts/AudioContentforSoundtrackProXX.pkg
/Library/Receipts/CompressorXX.pkg
/Library/Receipts/EXS24SamplerLibrarySamples.pkg
/Library/Receipts/EXS24SamplerLibraryStudio.pkg
/Library/Receipts/GarageBandXX.pkg
/Library/Receipts/ImpulseData.pkg
/Library/Receipts/ImpulseResponseUtility.pkg
/Library/Receipts/JamPackXX.pkg
/Library/Receipts/LogicXX.pkg
/Library/Receipts/MainStageXX.pkg
/Library/Receipts/RemixToolsXX.pkg
/Library/Receipts/RhythmSectionXX.pkg
/Library/Receipts/SharedLogicStudioHelpFiles.pkg
/Library/Receipts/SoundtrackProXX.pkg
/Library/Receipts/UltrabeatXX.pkg
/Library/Receipts/WaveburnerXX.pkg
User Preferences:
~/Library/Preferences/com.apple.logic.pro.plist
~/Library/Preferences/com.apple.logic.pro.cs
~/Library/Preferences/Logic/ (Legacy preferences)
License
/Library/Application Support/ProApps/Logic Studio System ID
Apple Loops
/Library/Audio/Apple Loops/Apple/Apple Loops for GarageBand/
/Library/Audio/Apple Loops/Apple/Apple Loops for Soundtrack Pro/
/Library/Audio/Apple Loops/Apple/iLife Sound Effects/
/Library/Audio/Apple Loops/Apple/Jam Pack 1/
/Library/Audio/Apple Loops/Apple/Jam Pack Remix Tools/
/Library/Audio/Apple Loops/Apple/Jam Pack Rhythm Section/
/Library/Audio/Apple Loops/Apple/Jam Pack Symphony Orchestra/
/Library/Audio/Apple Loops/Apple/Jam Pack World Music/
/Library/Audio/Apple Loops Index/
But what ever i tried, gives no solution . At the end a fail .
How can i wipe out all the Logic existence from my computer to make new install ?
Or, what is this problem i am having? As installation is not asking some discs which is necessary for the setup anymore .
Did anyone experienced that ?
I will be very happy if someone can assist on me this . Since 5 hours i am trying to setup this thing .
Thanks a lot

it is very frustrating to see such an installation problem happening from a "professional" called DAW .
I am actually a Protools user , and i have never had this type of complications .
I mean come on, i am just trying to install the thing .
On a new system, on a new computer and from an original purchase .
I believe i have enough computer knowledge to instal a simple software .
But i am spending almost 10 hours since yesterday to install Logic .
Instead of making designer boxes or giving fancy advertisements, i am inviting Apple Engineers to create proper working software .
Especially to see a professional audio software like Logic in this epic fall, is very very bad .
I mean you can say i am problematic and don't know how to instal a simple software, but than please write to google, Logic installation problems , and you will see thousands of issues .
Whatever i am writing here not against to the people who are replying and want to help , i just want Apple to read this .
Ah , i am sure Apple won't put attention on it , but doesn't matter .
You just lost 1 customer for Logic
I am erasing this thing now from my computer and continue with Protools as the way i was doing .
Sorry if i am bitter, but this is not acceptable .
Message was edited by: timbre2010

Final Cut Studio install problems

Well I was thrilled to get Final Cut Studio 2, but cannot get the thing installed. Looking to do a 100% uninstall so I can start fresh
I have the following disks:
1. Final Cut Studio
2. DVD Studio
3. Livetype1
4. Livetype2
5. Motion
On my first install everything went as planned and it asked me for serial number. I made it thru the first disk with no problems, and the 2nd one installed for awhile, but suddenly stopped. A message popped up saying to put the Final Cut Studio disk back in. When I did that it failed. So I followed these steps:
Delete the User Preferences
You can resolve many issues by restoring Final Cut Pro back to its original settings. This will not impact your project files, but you should verify your Scratch Disk location setting after doing this. To reset your Final Cut Pro user preference settings to their original state, do the following:
In the Finder, go to ~/Library/Preferences—the tilde (~) represents your Home folder.
Remove the "com.apple.finalcutpro.plist" file from the Preferences folder.
Remove the "Final Cut Pro User Data" folder from the Preferences folder.
Remove receipts and reinstall Final Cut Pro
Another approach you might consider is reinstalling Final Cut Pro. To do this effectively, you need to remove the application and its receipts, then install Final Cut Pro and use Software Update to install additional updates. You don't have to remove everything that was installed with Final Cut Pro. Follow the steps below to completely reinstall a fresh copy of Final Cut Pro. Note: Make sure that you have your installation discs and serial number handy before starting this.
Open the Applications folder.
Drag the Final Cut Pro application to the Trash.
Go to /Library/Receipts.
In the Receipts folder, select the "FinalCutPro.pkg" file.
Choose View > as List to view the contents in a list.
Click the Date Modified column header so you can easily see all of the receipts that were installed at the same time as Final Cut Pro.
Drag the FinalCutPro.pkg receipt to the Trash, as well as any other items that have the same modification date within 3 minutes of the FinalCutPro.pkg's modification date.
Click the Name column header to sort the list alphabetically.
Drag any other receipts whose names begin with "Final Cut Pro" to the Trash.
Insert your Final Cut Pro installation disc and install Final Cut Pro.
When finished, use Software Update (under the Apple menu) to update your software to the latest version.
I started a fresh install, but noticed it never asked me again for my serial number. I was skeptical, but the installation went on and I made it all the way to the last disk, but when I put the Motion disk in the computer seemed to struggle to read the disk and eventually asked for the FCP disk to be put back in which resulted in another error.
I have tried several times since then to get this thing installed but keep failing. I worry about how it never asks me for a serial number. Are there some files that I am not deleting?
I have also tried to install one disk at a time and installing without Content.
Using a brand new Imac

Not sure if this is related but I've upgraded from FCS 1 to FCS 2 and all went well. I've now started to install all the various application media and Motion fails around 75% through the installation. I've tried to do a disk image of the disk but again that fails approx. 75% of the way through with the error "I/O error"
Tried the Soundtrack Pro media this morning and got through the first disk and again about 75% through disk 2 the installation failed.
Maybe Apple has bought a job lot of 'cheap' DVD's to save some money? I'll pop into an Apple store and see what they have to say!
HVXuser

Final Cut studio install problem.

Just installed Final cut Studio, problem is i got everthing, except FCP7. why? I tried to reinstall but its not working...
Help!

You can't install FCP 7 if FCPX is already on your system. Remove everything with this: http://www.digitalrebellion.com/fcsremover/
Install FCS3 first, run all updates then download FCP X again. AppStore knows that you already payed for it.

Can someone help me - OS reinstall problems.

Alright guys, I'm feeling pretty stressed about my situation right now.
Here is what happened....
I have a 13' MBP pro that I bought at the start of 2012. It was new then.
Months ago I attempted to install Windows via Bootcamp, but it failed.
Since then, I have had to press option every time I turn on my machine and select the Macintosh HD to boot up. The choices there were Mac HD (mine), Recovery HD and the Windows Partition that was never used.
I have not been able to delete the partition where Windows was supposed to be installed. Whenever I do, it says "partition cannot be mounted". But this is not my problem. I have just lived with the extra partition and space I can't use.
Today, it turned off on me for no reason. When I pushed the power button, pushed option and slected the Mac HD to boot up, it turned off on me again. Multiple times. So I opened the recovery HD. I attempted to verify, and repair the Macintosh HD multiple times. Every time it failed, telling me to back up my stuff (which I couldn't do because it would just turn off), erase the drive and restore. I tried everything I could think of, verifying, repairing, restarting, etc. To no avail.
So, I erased the hard drive. I have no time machine backup, luckily I did not have a lot of files that weren't copied already, so erasing it was not a huge loss.
Then, I hit reinstall OS X from the Utilities menu in the Recovery HD. It tells me "to set up the installation of os x mountain lion, click continue." So I do. It verifies, and has me sign into my iTunes account.
Here's a wrench in the works: I have recently changed regions. I have moved from the US to South America (specifically Ecuador).
When I sign into my apple account via Recovery HD Utilities, it gives me the message "This Apple ID is only valid for purchases in the U. S. iTunes Store. You will be switched to that store." (I don't know what this means really). So, I hit okay. Nothing happens.
I repeat the steps to sign in, and then it gives me "This Apple ID has not purchased Lion. You must sign in with an Apple ID that was used to purchase Lion." But I have purchased Lion. I can see it in my iTunes on my GF's computer.
How do I fix this? I don't care about having lion at this point. I will take leopard, snow leopard, lion or mountain lion. I am using my girlfriends Mac (10.5.8) with no App store. I don't have any recovery disc, not even snow leopard or leopard.
Any suggestions to getting a functional OS on this machine are accepted and appreciated.
Here are my measley thoughts and/or ideas:
Make a Leopard disc (somehow?) from my GF's computer and boot up using that.
Download a disc image of one of the OS's and boot up using that.
Somehow get to a Mac with the App store on it, download my already US purchased Lion install file and either burn that to disc or thumbdrive to install on my mac.
Throw my computer out the window and never touch another PC again.
Please help. thanks.

Here is an update:
My problem was (among other things) was that I had purchased Lion and not Montain Lion So, I upgraded the other Mac I have access to and purchased the Mountain Lion update. I recovered via internet overnight after making the purchase.
The OS worked for about 6 or 7 hours and then it shut off on me again for no apparent reason. When I rebooted, the computer went to the Recovery OS, with what seemed like no OS installed. I repaired and rebooted pressing the option key looking for a drive with the OS installed, but there was none.
So, through internet recovery I would have waited another 6-7 hours to upgrade the system with Mountain Lion via internet. Instead of that, I made a boot disk with the other computer for Mountain Lion. I made it with an SD card. I followed the instructions carefully.
Using the boot disk I attempted to reinstall. The first few times it would just progress to somewhere near the end and then the install program would close and it would return to the Recovery Option screeen. There was no succesful install and on restart it would not show a regular Mac drive, just the recovery drive. Eventually, it told me near the end of the progress bar that "Items could not be downloaded from the internent" and it would return to the Recovery OS screen, with no succesful install.
Now, after all this, I have lost the option for internet recovery. The comuter will only go to Recovery HD when the SD card is in the slot, otherwise it flashed the Folder with the Question mark in it....or.....shows me a spinning globe that says internet recovery for a few seconds, and then flashes a yeild sign with an Exclamation point and underneath is says "Apple Error -6002F."
So I can't use the SD card to successfully install the OS, and I cannot enter the Recovery HD unless the SD card is in the slot. The Recovery HD will not allow me to choose internet recovery mode. I think this may be because if it sees a boot disk it defaults to that.
Should I try making another USB boot disk? I feel like my problem may be beyond that however, seeing as how originally it would just shut off for no reason then finally it made me reinstall the OS, and then after reinstalling doing the same thing. Would it be a RAM issue? A HD issue? Can I even tell? I cannot enter diagnostic mode either. At least not by rebooting and holding D.
Thanks to all who read.
Any info, suggestions, tips or advice?

Sun Studio Debugging problem

Hello
I need help configuring the Sun studio debugger to work in fedora 8. The project is loaded from a make file, compiles fine, and runs fine. However, I can not place break points, and when I start the visual debugger, it gives a message box titled progress, and hangs on saying: starting debugger: /lib/libc.so.6
Running from the command line gives me:
$dbx <my program>
For information about new features see `help changes'
To remove this message, put `dbxenv suppress_startup_message 7.6' in your .dbxrc
Reading <my program>
Reading ld-linux.so.2
Reading libm.so.6
Reading libmpich.so.1.1
Reading libpthread.so.0
Reading librt.so.1
Reading libc.so.6
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: warning: unknown location expression code (0xe0)
dbx: panic: "ThreadAgent::setup_helper"(): Assertion (ta_td_agent) failed - "thread.cc":2674
I have another problem in debugging an mpi problem in another installation of Sun Studio on Solaris 10 on a Sun machine. The visual debugger is working fine there, however, I need to debug with mpirun
to decide the number of processors, because by default it loads the application on one processor. Iwill need to do this as well later on the linux machine I am using now, which doesn't even start the debugger on a sequential code so far.
I appreciate your help a lot.
Thank you very much in advance.
Manal

mhelal wrote:
Hi
Thank you for your reply. you said 2 problems,Yes, basically I meant these two:
1. dbx: warning: unknown location expression code (0xe0)
2. dbx: panic: "ThreadAgent::setup_helper"(): Assertion (ta_td_agent) failed - "thread.cc":2674
First one should be fixed in dbx itself, but the second looks like an incompatibility between Fedora's libc and dbx; unless distros in "supported" list upgrade to the same version of libc, dbx can't be changed to match it.
In other words, I'm sorry to say that you will probably not succeed in using dbx on Fedora 8 for the time being.

Visual Studio 2013 problem setting localhost alias in IIS Express

I'm trying to define an alias to localhost in development ambient in Visual Studio 2013.
When I used previous versions of Visual Studio, I used the Visual Studio Development Server to debug and the only thing I needed to do was to change my hosts file adding this entry:
127.0.0.1 localhost
127.0.0.1 localhostalias
I'm having problems to do this with VS2013. I've browsed all over the internet and I've tried the following things, but I'd like someone of you to tell me what am I doing wrong. I've obviously already changed the hosts file...
In the web project Properties -> Web in the section Servers where IIS Express is selected as default, I tried changing http://localhost:53944 to http://localhostalias:53944 but an error is showed saying: "Unable to create the virtual directory. Cannot
create the Web site 'http://localhostalias:53944'. You must specify "localhost" for the server name".
I also tried changing the applicationhost.config which is located in <<Documents>>\IISExpress\config to
<site name="<<Site name>>" id="2">
<application path="/" applicationPool="Clr4IntegratedAppPool">
<virtualDirectory path="/" physicalPath="<<Site Path>>" />
</application>
<bindings>
<binding protocol="http" bindingInformation="*:53944:*" />
</bindings>
</site>
And when I opened the project it was changed to
<site name="<<Site name>>" id="2">
<application path="/" applicationPool="Clr4IntegratedAppPool">
<virtualDirectory path="/" physicalPath="<<Site Path>>" />
</application>
<bindings>
<binding protocol="http" bindingInformation="*:53944:*" />
</bindings>
</site>
<site name="<<Site name>>(1)" id="3">
<application path="/" applicationPool="Clr4IntegratedAppPool">
<virtualDirectory path="/" physicalPath="<<Site Path>>" />
</application>
<bindings>
<binding protocol="http" bindingInformation="*:53944:localhost" />
</bindings>
</site>
Can someone help me?
Thanks in advance,
Camilo

Hello Camilo,
This forum supports "setup and deployment of .NET Framework.", if there is something about the installation of .NET Framework, you can post it here. I read your post and I think you should post it under
IIS forum instead.
Regards,
Barry Wang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Creative webcam dell studio 17 problems with creative zen

hi there, ive got a dell studio 17 with a built in webcam.
When i try to install the drivers for the creative zen, and put the disk in, a message comes up saying 'we could not find the driver software for your device'
then windows trys to solve the problem and comes up with a message saying 'this problem was caused by a compatibility issue between this version of windows and yor webcam which was made by creative' 'go online to download and install the update for your webcam'
however i try the website they gave me, which is the creative support page, but i cant find a built in webcam for the dell studio 17
i was just wondering whether the answer is right in front of my eyes, or if anyone else had this problem

Hello MichelleStudio!
The only thing that comes to mind to help you out here is to try to visit Dell's support website and update your hardware drivers and/or firmware. To get to your model's specific downloads click on "Drivers & Downloads" and choose the Service Tag option. It asks you for your Service Tag which is on the bottom of your laptop. Then it will bring you to a list of available downloads.
Make sure the operating system is set to Windows Vista 64-bit, as this is what your laptop came with. The important ones to update are BIOS and Chipset. But since I don't know specifically what is causing your problem, it's kind of a guessing game.
This is assuming you can get your laptop to boot up long enough to perform these updates. You said that the error said something about a driver, so hopefully updating your hardware drivers and firmware help.
Hope this helps, thank you for posting!
Jacob|Web Planner | Best Buy® Corporate

Developer Studio deployment problem

Hi All,
I'm unable to deploy from Developer studio. Error is 'Server XXX did not accept login request as admin on port 50018'.
Looked into the documentation and put an entry in the host file too. but i still have the problem.
Studio (2.0.4)
Server: SP14
Tried with Studio(2.0.8 & 2.0.11) too. Please help.
I'd greatly appreciate an answer.
Thanks in advance,
Regards,
Rajit

Hi,
I can tell you some strange thing that happens everytime I am deploying with Developer Studio:
1.) I deploy locally. My password is xxx. Everything is fine.
2.) I deploy on the productive system. My password is yyy. Everything is fine.
3.) I change the settings to the integration system. Refresh the view. I can see the correct integration engine. I deploy. My password is yyy. The files are deployed on the productive system, not the integration system. Bad Luck.
If I change the password for the productive system to zzz, I get the same error message as you got when I try to deploy with zzz to the productive system. That is because Developer Studio connects to the wrong system.
This error happens every single time. Therefore I stopped deploying via Developer Studio for other engines but my own localhost. Deplyoing with SDM gui works just fine.
May be, you have a similar situation ?
Regards, Astrid

Windows 8 reinstall problem

Hi everybody!
I'm new in this forum. I bought my Lenovo thinkpad L430 last December with windows 8 installed, and now I was trying to install Linux in dualboot. The problem is that Linux asks for two primary partitions to be installed, but on my computer there were already 4 primary partitions (6 partitions).
That's what I did: I copy the recovery partition (13 Go) over a external hard drive, and I tried to reinstall windows to change the partitions during the installation process. To do that I choose the option reset in the menu.
But it was not possible to reinstall windows 8.
Now the system does not boot over windows anymore.
Moreover I do not have any image of my operating system. So I would like to know how I can reinstall windows 8 on my computer. I lost my windows 8 license ?
Thanks for any help!

I noticed you're missing a 350mb recovery partition (see my shot below. I have a Flex 15 thus the smaller size).
The partition layout is so much more complicated with UEFI...
←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗
Tap that kudos button if I helped ^^
←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗
Attachments:
diskmanagement.png ‏51 KB

CS3 reinstall problem - asking for uninstalled CS4 beta

I have a PowerBook G4 with 1.5 Gb RAM running Mac OS 10.4.11. I have the CS3 Suite installed and last year downloaded a beta copy of Fireworks CS4. After using it a bit, I uninstalled Fireworks CS4 with the Adobe uninstaller.
I recently had a problem with Bridge and decided to uninstall and reinstall the software. I uninstalled Photoshop CS3 (in order to uninstall Bridge) and when I began to reinstall Photoshop, the installer ask me to insert the Fireworks CS4 disk! Since I don't have that disk, I hit cancel and the install terminated (I tried this multiple times and rebooted each time)
I then downloaded and ran Adobe's CS4 Cleanup app. It found NO CS4 apps to clean up.
Any suggestions would be appreciated.
Mark

Thanks Neil and Buko for your input. Here's where things stand now:
1) I uninstalled FW CS4
2) I uninstalled CS3
3) I ran Cleanup Script
4) I repaired permissions using Disk First Aid
5) I reinstalled CS3
The problems with Bridge remained (sluggish, won't display icons properly, won't show a preview image, won't operate the folder list, etc.).
So I called Adobe support. Unfortunately, because I am having problems installing CS3 and NOT CS4, support is NOT FREE. The rep was helpful though -- she pointed me to document number 331594 (Diagnosing Bridge problems) and told me to start there. I followed EVERY step . . . disable start-up scripts, reverted to original preferences, cleaned up the cache, disabled the folder windows, and the problems remain.
Guess I'll have to pay . . .
Lesson learned: don't trial Adobe software. That's when my problems began.

Logic Studio Install Problems

Purchased Logic Studio a couple weeks ago. The first set I recieved would not install correctly and it errored out several times regardless of how I went about installing it. Contacted Apple Support and they indicated I may have a bad set of disks so I returned my set and recieved a new set yesterday. Install problems continue but now different. Orginal set woudl load a coiuple of disks then error out. This set will laod the install disk then when asked to insert the Audio Content 1 disk the computer will spin th edisk around a few times the spit it out. Tried several times and even tried inserting other content disks. I've read some of the conent here and some mention a possibel bad DVD Drive but I do no think my DVD Drive is the problem since after trying the Logic Studio set I successfully installed FrameForge.
When I attempted to install the first set of disks last week I was able to select all the options, SoundTrack Pro, Mainstage, etc. On this set my SoundTrack Pro option is grayed out and I cannot select it to load. I read here last week, when the first set would not load, to remove everything associated with Logic Studio and try again, which I did. Is it possible there are remneants remaining somewhere on my system that is disallowing the SoundTrack install this time?
My system config is:
Processor: 3.4 GHz Intel Core i7
Memory: 16GB 1333 MHz DDR3
Graphics: AMD Radeon HD 6970M 2048MB
Software: Mac OSX Lion 10.7.5 (11G63b)
1TB Internal SATA Disk (This is the drive I am attempting to load on)
256GB Flash Storage
12TB (RAID 5 Configure to 6TB) Pegasus External
This evening I will call Apple Support again, but any advice from the audience is much appreciated.
Signed: Frustrated but Determined

Purchased Logic Studio a couple weeks ago. The first set I recieved would not install correctly and it errored out several times regardless of how I went about installing it. Contacted Apple Support and they indicated I may have a bad set of disks so I returned my set and recieved a new set yesterday. Install problems continue but now different. Orginal set woudl load a coiuple of disks then error out. This set will laod the install disk then when asked to insert the Audio Content 1 disk the computer will spin th edisk around a few times the spit it out. Tried several times and even tried inserting other content disks. I've read some of the conent here and some mention a possibel bad DVD Drive but I do no think my DVD Drive is the problem since after trying the Logic Studio set I successfully installed FrameForge.
When I attempted to install the first set of disks last week I was able to select all the options, SoundTrack Pro, Mainstage, etc. On this set my SoundTrack Pro option is grayed out and I cannot select it to load. I read here last week, when the first set would not load, to remove everything associated with Logic Studio and try again, which I did. Is it possible there are remneants remaining somewhere on my system that is disallowing the SoundTrack install this time?
My system config is:
Processor: 3.4 GHz Intel Core i7
Memory: 16GB 1333 MHz DDR3
Graphics: AMD Radeon HD 6970M 2048MB
Software: Mac OSX Lion 10.7.5 (11G63b)
1TB Internal SATA Disk (This is the drive I am attempting to load on)
256GB Flash Storage
12TB (RAID 5 Configure to 6TB) Pegasus External
This evening I will call Apple Support again, but any advice from the audience is much appreciated.
Signed: Frustrated but Determined

Iphoto reinstall problems

Hi, after numerous problems with "Mavericks" I have ditched it and returned to "Mountain Lion" however, whilst I have been able to rescue "pages", "numbers" etc, I am unable to return to the "mountain lion" version of iphoto. Can anyone offer any suggestions as to how to reinstall an older version of iphoto - one that will operate with Mountain Lion?

Restore the iPhoto app from your last Time Machine backup from before the upgrade to iPhoto. You cannot download a full version of iPhoto '11 from Apple's Support pages or the App Store, if you already upgraded to Mavericks and iPhoto 9.5.1.
How did you originally buy iPhoto? If it came preinstalled with an older system (MacOS 10.6), then you will find an iPhoto '11 installer on your system install media with the bundled application. If you bought an iLife '11 installer, use that.
Other than that, your only option would be to buy iPhoto again ( aniLIfte '11 install DVD) or solve the issues with Mavericks on your system and use the iPhoto 9.5.1 you have.

Older Studio Display Problem

I have an older (clear base & grey/white stripe) Apple Studio Display hooked into an older 2GHz PowerPC G5 running 10.4.11. I went to turn the machine on as usual by touching the sensor on the display. The machine turns on, but nothing displays. Checked connector, still same problem. Hooked old CRT into other slot on card (GeForce FX 5200) via ADC adapter, and that works, but nothing on ASD. System Profiler recognizes the ASD, says it's on online, but no picture on screen. Any help would be appreciated.

Personally, it sounds like the back light went out. I don't think it is worth fixing. Go splurge on a 24" Apple LCD Display
Glor

FC Studio Reinstall Problem

Similar Messages

Maybe you are looking for