FCC in Xslt Mapping?

Is it possible do define FCC in XSLT Mapping?
If Yes, where do we define Fcc parameters in XSLT Mapping?

Praveen,
I didn't understand your question...
FCC is a file protocol which we use at adapter side.(File/JMS adapters).
Once file is converted as per FCC parameters, you get XML data which you can use as input for mapping (whether xslt, or message mapping, etc).
This way FCC parameters can't be used even in Message mapping.
These are 2 mutually distinct steps. Once input message is ready after FCC only then mapping program is called. How can these be used together?
Please clarify if I got your question incorrectly...
Regards.
Edited by: Anirudh Vyas on Jul 2, 2008 10:04 AM

Similar Messages

Using XSLT mapping to avoid File content conversion

Hi all,
Can we avoid FCC by using XSLT mapping? I have a scenario in which I have to avoid FCC in the adapter and save the file in a excel/csv format. I have been through the different blogs and forums in SDN.
I have been through Michal Krawczyk's Blog https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/2803. [original link is broken] [original link is broken] [original link is broken] [original link is broken]
Got a bit confused whether that blog serves my purpose. Expecting your valid inputs.
Thanks and regards,
Harikumar. S

Hi,
There are multiple ways in which you can avoid Content Conversion in the Sender / Receiver File adapters.
I think there was a heated discussion already regarding this in one of your earlier threads,
Read/Write csv files without file converter
Basically, if you want to avoid content conversion on the sender file adapter,
1. Write an Adapter Module. or,
2. Use a Java Mapping.
If you want to avoid content conversion on the receiver File adapter,
1,. Use a Adapter Modules or,
2. Use Java Or XSLTmapping ( XSLT can be used if the input to the mapping is XML and output needs to be say a Excel File etc).
Regards
Bhavesh

How to skip first TWO Lines of   .txt file    using XSLT Mapping

Hi Friends ,
                          I have an .txt file in has the format as
                           <TEST>
                            4564564545
                            56456444566
                            56465
                                How can i skip the first two Lines when i am writing the XSLT Mapping ?
                          That <TEST> and empty line shouldn't go the rfc .
                         How can i skip and sent to rfc using XSLT Mapping ?
Best Regards .,
V.Rangarajan

you can avoid the empty lines in your File Content Conversion by defining offset.
<i>Under Document Offset, specify the number of lines that are to be ignored at the beginning of the document.
This enables you to skip comment lines or column names during processing. If you do not make an entry, the default value is zero lines.</i>
ref: http://help.sap.com/saphelp_nw04/helpdata/en/2c/181077dd7d6b4ea6a8029b20bf7e55/content.htm
then the generated XML after FCC will not have the empty lines.

Possible with XSLT mapping?

Hi,
I have source xml structure of format
<Header fld1 fld2 fld3
fld4 fld5 fld6 ><line fld7 fld8 fld9 </line></header>
Header occurence is 1---unbounded
and line occurence is 0---unbounded
and line items can exist or not for some header items.for some headers items can be single or multiple.
I get xml files on sender side and need to convert to flat files ,so I am using sender file CC on sender and receiver file CC with FCC on the receiver side.
I am able to get with receiver file FCC ,I know FCC can support two level heirarchies only.
header1
header2
header3
header n
line x
line y
line z
line n
so i dont know to which header values the item values belong to.I need to get
this structure
header1....(if no items)
header2....(let say 2 items)
linex
liney
header3...(no items)
header4....(one item)
linez
header n.....(again no items)
so I have another Xi guy,he told me that we can achieve this by using a XSLT mapping rather than gaphical mapping which I am using now.
so can we get the structure what I wanted with XSLT mapping or is it nothing with mapping and it is with adapter?(I think its nothing with mapping)
I know we may get the required output structure by writing a module program and call that in the receiver file adapter.
suggestions please.
thank you,
regards,
Babu

udo,
sorry if I put in confusion with my structures of both source and target.I am trying to give little eloberate
I have source xml data like this.
<Header1 fld1=1234 fld2="name1" fld3='SAP1"
fld4='000" fld5=0 fld6="sdn1"</header>...............no line items here
<Header2 fld1=123 fld2="name" fld3='SAP"
fld4='00" fld5=0 fld6="sdn" ><line fld7=value1 fld8=value2 fld9=value3 /line><line fld7=value4 fld8=value5 fld9=value6 /line></header>.....two line items here
<Header3 fld1=123 fld2="name" fld3='SAP"
fld4='00" fld5=0 fld6="sdn" ><line fld7=value7 fld8=value8 fld9=value9 /line></header>......one line item here
Header4 fld1=12345 fld2="name2" fld3='SAP2"
fld4='0006" fld5=01 fld6="sdn2"</header>.......no line items here
I want target flat file structure like this considering "~" (tild)as delimiter
1234name1SAP100000~sdn1 ...................> flatfile values for header1(no item values for this header1)
123nameSAP000~sdn..........................> flat file values for hader2
value1value2value3...........................>line item values for header2
value4value5value6...........................>line item values for header2(two line item values for this header2)
123nameSAP000~sdn..........................>values for hader3
value7value8value9...........................>line item values for header3(one item values for this header3)
12345name2SAP2000601~sdn2..................>values for header4(no item values for this header4)
................... like for n header values.

JMS to IDOC xslt mapping

Hi,
We have a JMS to IDOC scenario. We are using PI7.1. We are currently using XSLT Mapping . This needs to be replaced by Graphical mapping as XSLT mapping is consuming more memory.
If we remove the XSLT Mapping between source and target would we need content conversion for the soruce file ?
Please advice.
Thanks,
Teresa

Hi Teresa,
File Content conversion(fcc) is used to convert Any format file to XML format, while sending the data into PI.
& XML format to Any required output format, while sending data out of PI.
B'cos, PI only understands XML language.
So, this has nothing to do with XSLT mapping in your case.
change XSLT mapping to Graphical mapping. that should accomplish your task.
-santosh.

FileName in ABAP XSLT Mapping

Dear SDN,
In an integration scenario we are using sender File Adapter and a ABAP XSLT Mapping.
Is there any way to get the source FileName from such mapping. Im trying to use the adapter-specific message attributes, but it doesn't work, and I didn´t find an example, probably I and doing somthing wrong.
regards,
GP

Thank you for your help,
I just try to access the adapter-specific attibutes using:
<xsl:stylesheet version="1.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:key="java:com.sap.aii.mapping.api.DynamicConfigurationKey">
<xsl:variable name="filename" select="key:create('http://sap.com/xi/XI/System/File', 'Directory')" />
</xsl:stylesheet>
but the following error raised:
<SAP:Stack>Error while calling mapping program YXSLT_TEST (type Abap-XSLT, kernel error ID CX_XSLT_RUNTIME_ERROR) Call of unknown function</SAP:Stack>
have you had this situation?

XSLT MAPPING

In which cases we will go for XSLT MAPPING?
What are different functions available in altova map force ? please provide me the helpful material regards this?

Hi,
Check this link..
http://help.sap.com/saphelp_nwpi711/helpdata/en/73/f61eea1741453eb8f794e150067930/frameset.htm
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/01a57f0b-0501-0010-3ca9-d2ea3bb983c1
STEPS.
1. Open the Alto MapForce, import the source .xml and .xsd file in it
2. Similarly import the target .xml and .xsd in MapForce.
3.These two data files should match with source and target data types in Integration Repository.
4.Complete the graphical mapping using extensive list of XSLT functions available there.
5. Save the mapping file.
6.Click the XSLT tab. You will have the entire xslt logic there.
7.Copy that content and save it as .xsl file.
8. Zip above .xsl file and import the same into IR under Imported Archives.
Thanks.

XSLT mapping Help Required.

XSLT mapping Help Required.
Hi Experts,
I am New to XSLT Mapping. I am practising the below Example:
InputXML File:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
XSL StyleSheet File:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/Gen"
Xmlns:ns1=”http://XYZ.com/Test”>
<xsl:template match="/">
<ns1:MT_XSLT_Target>
<Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
<Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
</Name>
<Street> <xsl:value-of select="concat(concat(ns0:Mt_XSLT_Source/Person/Address/Houseno,' '),
ns0:Mt_XSLT_Source/Person/Address/Street)"/> </Street>
<City> <xsl:value-of select="ns0:Mt_XSLT_Source/Person/Address/City"/> </City>
</ns1:MT_XSLT_Target>
</xsl:template>
</xsl:stylesheet>
The Desired Output shuold be:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_XSLT_Target xmlns:ns1="http://XYZ.com/Test">
<Title>Male</Title>
<Name>Anshul Chowdhary</Name>
<Street>83/b 2nd Main</Street>
<City>Mysore</City>
</ns1:MT_XSLT_Target>
I have refered the xsl in xml and i am getting the below Oupt in a Single line like this:
Anshul Chowdhary Male 2nd Main 83/b Mysore
I am Unable to display in Target XML Fomrat as shown above. Please check and do the needful.
Regards,
GIRIDHAR

Hi,
I have used below for testing.
Input xml:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
xsl code:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/gen"
    xmlns:ns1="http://XYZ.com/Test">
    <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
    <xsl:template match="/">
        <ns1:MT_XSLT_Target>
            <Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
            <Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
            </Name>
            <Street> <xsl:value-of select="concat(concat(/ns0:MT_XSLT_Source/Person/Address/Houseno,' '),
                /ns0:MT_XSLT_Source/Person/Address/Street)"/> </Street>
            <City> <xsl:value-of select="/ns0:MT_XSLT_Source/Person/Address/City"/> </City>
        </ns1:MT_XSLT_Target>
    </xsl:template>
</xsl:stylesheet>
For testing in PI ,change the extension from .txt to .xsl and zip it and upload into PI as an imported archive .
Regards
Venkat

XSLT Mapping error

Hi All
I am working on PI 7.1 where I have customized standard XSLT mapping according to my requirement.
I have to add 2 fields in the standard data type ReplenishmentOrder_Notfication from SNC 7.0 SWCV.
In standard scenario once IDOC STPPOD.DELVRY03 is released from ECC the PI scenario send this to SNC Proxy ReplenishmentOrderNotification_In.
In my requirement I have to send XML file generated from IDOC to one of Application Folder. I have customized data type, message type, operation mapping, service interface by coping standard things.
So the changes I have done in standard XSLT mapping are just changin name of data type and not added any mapping for the two new fields I have added to the data type as its not require at the moment.
When I am running test I am getting follwoing error in Trace. Here please notice that its mentioning standard xslt mapping program name only though on the top you see customized names.
Please give your inputs to resolve the issue. Thanks.
Operation Mapping
StppodDelvry03_MT_ReceivedDeliveryNotification_01
Name
StppodDelvry03_MT_ReceivedDeliveryNotification_01
Namespace
http://sap.com/xi/SNC/Global
Runtime error
TransformerException occurred during XSLT mapping StppodDelvry03_ReceivedDeliveryNotification_01 (http://sap.com/xi/SNC/Global, 46c20a71-248e-11dc-c4be-dd500a115642, -1)
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace> <Trace level="1" type="T">Interface Mapping http://sap.com/xi/SNC/Global StppodDelvry03_ReceivedDeliveryNotification_01 </Trace> <Trace level="1" type="T">TransfromerException during XSLT processing: Thrown: javax.xml.transform.TransformerException: com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(, row:1, col:8)(, row=1, col=8) -> com.sap.engine.lib.xml.parser.ParserException: XML Declaration not allowed here.(, row:1, col:8) at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:251) at com.sap.aii.ib.server.mapping.execution.AbstractMappingTransformer.transform(AbstractMappingTransfor
Edited by: Amol on May 22, 2009 3:26 PM

Hi Amol
for the error CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV
<Trace level="1" type="B">CL_MAPPING_XMS_PLSRV3-ENTER_PLSRV</Trace> <Trace level="1" type="T">
just check this Thread issue is solved by restarting the service verifySenderAgreement
at thread
Re: Wrong Sender Agreement
Thanks
Abhishek

XSLT mapping queries.

Hi,
I have a scenario in which I need to post the data in JMS queue from a proxy call.
[Proxy>PI>JMS]. Here the MQ message is fed to a web application.
The scenario contains two mapping viz message and XSLT mapping.
The first one is message mapping and then XSLT is called.
Now in the XSLT mapping CDATA tag is called to skip the xml parsing and send to JMS queue for HTML output in web application.
My doubt is how can I achieve table formatting from PI. Few options can be
1) incorporate xsl in CDATA tag of XSLT mapping for HTML tag for table format?
2) instead of JMS queue, should I need to post in HTTP receiver directly?
3) Is it the xsl need to add in Web application side for the sending xml from PI?
Please help in my understanding.
Thanks
PV.

Hi,
Try with Java Proxy,you can directly update data in to web application or if you web application team ready to accept data in the form of web service then you no need to generate output in the form of HTML.
Regards,
Raj

XSLT Mapping Related

Hello Experts,
In a scenario we are sending Purchase orders and Purhase Order change from SAP to SNC through XI.
Currently we are using Orders03 message type for IDOC.
The requirement is to use Orders05 message type for IDOC.
What changes would be necessary if we are to use Orders05 instead of Orders03
- On SAP side,
- in the XSLT mapping, and
- On XI side.
Thanks in advance,
Suraj

Hi,
What changes would be necessary if we are to use Orders05 instead of Orders03
- On SAP side,
==> you need to check your distribution model (BD64) and partner profiles (WE20) and adjust the settings there according to ORDERS05.
- in the XSLT mapping, and
==> This depends on what your XSLT looks like. If there are any ORDERS03 specific statements, etc. or the structure is "heavily" changed from ORDERS03 to ORDERS05 you need to adjust the XSLT accordingly.
- On XI side.
==> You need to import the ORDERS05 IDoc Metadata to XI Abap stack (IDX2). Also in IR you need to import the new IDoc, create message type and assign it to your mapping.
Regards,
Kai

XSLT Mapping of Adapter-Specific Message Attributes

Hi,
We have the requirement to build a soap request with a custom soap envelop/header which contains a sessionId.
Therefore we developed a xlst mapping which is called directly after a graphical mapping.
In the graphical mapping the session id is written to the dynamic configuration.
The goal is to read this session id in the xslt mapping from the dynamic configuration using XSLT Mapping of Adapter-Specific Message Attributes. We used [this|http://help.sap.com/saphelp_nwpi711/helpdata/en/43/03fe1bdc7821ade10000000a1553f6/content.htm] documentation as an example.
But we are getting the following error: TransformerConfigurationException triggered while loading XSLT mapping. The error is raised at this node: <xsl:variable name="dynamic-conf" select="map:get($inputparam, 'DynamicConfiguration')" />
This is the coding of the xslt transformation:
<?xml version="1.0" encoding="utf-8"?>
<xsl:stylesheet version="1.0"
      xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
      xmlns:ns1="urn:enterprise.soap.sforce.com"
      xmlns:map="java:java.util.Map"
      xmlns:dyn="java:com.sap.aii.mapping.api.DynamicConfiguration"
      xmlns:key="java:com.sap.aii.mapping.api.DynamicConfigurationKey">
<xsl:output indent="no" />
<xsl:param name="inputparam"/>
<xsl:template match="/">
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:urn="urn:enterprise.soap.sforce.com">
<soapenv:Header>
<urn:SessionHeader>
<xsl:variable name="dynamic-conf" select="map:get($inputparam, 'DynamicConfiguration')" />
<xsl:variable name="dynamic-key" select="key:create('http://sap.com/xi/XI/System/SOAP', 'sessionId')" />
<xsl:variable name="dynamic-value" select="dyn:get($dynamic-conf, $dynamic-key)" />
<urn:sessionId><xsl:value-of select="$dynamic-value"></xsl:value-of></urn:sessionId>
</urn:SessionHeader>
</soapenv:Header>
<soapenv:Body>
<xsl:copy-of select="*"/>
</soapenv:Body>
</soapenv:Envelope>
</xsl:template>
</xsl:stylesheet>
Any help will be highly appreciated.
Regards, Henk

Hi, yes we did try that and lot's of other combination.
The results of those trials are that it seems to go wrong with <xsl:variable name="dynamic-conf" select="map:get($inputparam, 'DynamicConfiguration')" />
When we enclose it with <xsl:if test="function-available('map:get')"> the transformation is not dumping, but the function is not available.
Regards, Henk

XSLT mapping - Mapping of unbounded elements using Altova Mapforce

Hi,
Please give guidance on doing XSLT mapping for unbounded elements in Altova Mapforce. I am not seeing any functions (like FOR loop etc.,) in the XSLT mapping screen for the same.
I appreciate your input.
Regards
Ramesh

HI,
For XSLT Mapping refer this help to get functions,syntax etc-
http://www.w3schools.com/xsl/default.asp
Regards,
Moorthy

XSLT mapping sorting against an output field

Hi, all
I am testing my XSLT mapping. Here is the output message type defintion:
I want to sort f2 in my xslt mapping. Here is my mapping:
<?xml version="1.0" encoding="UTF-8" ?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://fileconversion" xmlns:ns1="http://fileconversion">
    <xsl:template match="/">
      <ns1:TESTOUTPUT_MT>
        <Msg>
        <xsl:for-each select="ns0:TESTDATA_MT/Trans/Detail">
        <xsl:sort select="Transaction/Data/f2" />
          <Transaction>
            <Data>
              <f1>
                <xsl:value-of select="PERNR" />
              </f1>
              <f2>
                <xsl:value-of select="POSITION" />
              </f2>
              <f3>
                <xsl:value-of select="TEL" />
              </f3>
              <f4>
                <xsl:value-of select="concat(concat(STREET,' '),CITY)" />
              </f4>
            </Data>
          </Transaction>
            </xsl:for-each>
        </Msg>
      </ns1:TESTOUTPUT_MT>
    </xsl:template>
</xsl:stylesheet>
The sorting did not execute on field "f2" and the data is in the same order as the input.
Note that I can do <xsl:sort select="POSITION " /> instead and it will work. But I am trying to test on sorting against output field as this is the requirement in the real interface.
What did I do wrong? Please advise.
Thanks,
Jonathan.

Hi Jon - You can sort the source values. If you use "sort select="Transaction/Data/f2" i don't think it has got some effect.
You can use <xsl:sort select="POSITION " /> Any issues with that?
Just to add - when you map Position with F2... how does the sorting will be different when you execute it on F2 or Position?
If you are doing some calculation for F2 then should handle the Sort function accordingly..

XSLT Mapping issue

Hello Friends,
I have got one scenario in which XSLT mapping is used.The third party file is mapped to IDoc INVOIC01.After the development of the mapping code,I got the result as below in the XML Spy
<E1EDP01 SEGMENT="1">* first segment
               <POSEX>0</POSEX>
               <E1EDP02 SEGMENT="1"> Subsegment1
                    <QUALF>001</QUALF>
               </E1EDP02>
               <E1EDP04 SEGMENT="1"> Subsegment2
                    <MWSKZ></MWSKZ>
                    <MSATZ>22.00</MSATZ>
                    <MWSBT>6.660</MWSBT>
               </E1EDP04>
               <E1EDP04 SEGMENT="1">Subsegment2
                    <MWSKZ></MWSKZ>
                    <MSATZ>22.00</MSATZ>
                    <MWSBT>13.330</MWSBT>
               </E1EDP04>
          </E1EDP01>
          <E1EDP01 SEGMENT="1">
               <POSEX>0</POSEX>
               <E1EDP02 SEGMENT="1">
                    <QUALF>001</QUALF>
               </E1EDP02>
               <E1EDP04 SEGMENT="1">
                    <MWSKZ></MWSKZ>
                    <MSATZ>22.00</MSATZ>
                    <MWSBT>6.660</MWSBT>
               </E1EDP04>
               <E1EDP04 SEGMENT="1">
                    <MWSKZ></MWSKZ>
                    <MSATZ>22.00</MSATZ>
                    <MWSBT>13.330</MWSBT>
               </E1EDP04>
          </E1EDP01>
But the expected result is as below:
                            <E1EDP01 SEGMENT="1">
               <POSEX>0</POSEX>
               <E1EDP02 SEGMENT="1">
                    <QUALF>001</QUALF>
               </E1EDP02>
               <E1EDP04 SEGMENT="1">
                    <MWSKZ></MWSKZ>
                    <MSATZ>22.00</MSATZ>
                    <MWSBT>6.660</MWSBT>
               </E1EDP04>
          </E1EDP01>
          <E1EDP01 SEGMENT="1">
               <POSEX>0</POSEX>
               <E1EDP02 SEGMENT="1">
                    <QUALF>001</QUALF>
               </E1EDP02>
               <E1EDP04 SEGMENT="1">
                    <MWSKZ></MWSKZ>
                    <MSATZ>22.00</MSATZ>
                    <MWSBT>13.330</MWSBT>
               </E1EDP04>
          </E1EDP01>
ie For each E1EDP01 segment,there should be only one E1EDP04 segment.
Please help me in this regard how to code the xslt map for this...
Thank you
Sam
Edited by: Guest on Apr 4, 2008 1:00 PM

Hello Ashish,
Thanks for your reply.
The third party system is th sender and sends XSD file which contains header detail (with multiple tax details in it) and multiple line Item details (which contains one tax details per lineitem).
ie if there are two line items then each line item should have one tax details (1st tax detail in header should match with 1st tax details of linitem, and 2nd should match with second line item tax details..etc)
<?xml version="1.0" encoding="UTF-8"?>
<INVOIC01 xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
     <IDOC BEGIN="1">
          <E1EDK04 SEGMENT="1">
               <MWSKZ>VAT</MWSKZ>
               <MSATZ>22.00</MSATZ>
               <MWSBT>6.660</MWSBT>
          </E1EDK04>
          <E1EDK04 SEGMENT="1">
               <MWSKZ>VAT</MWSKZ>
               <MSATZ>22.00</MSATZ>
               <MWSBT>13.330</MWSBT>
          </E1EDK04>
          <E1EDP01 SEGMENT="1">
               <POSEX>0</POSEX>
               <E1EDP04 SEGMENT="1">
                    <MWSKZ>VAT</MWSKZ>
                    <MSATZ>22.00</MSATZ>
                    <MWSBT>6.660</MWSBT>
               </E1EDP04>
          </E1EDP01>
          <E1EDP01 SEGMENT="1">
               <POSEX>0</POSEX>
               <E1EDP04 SEGMENT="1">
                               <MWSKZ>VAT</MWSKZ>
                               <MSATZ>22.00</MSATZ>
                               <MWSBT>13.330</MWSBT>
               </E1EDP04>
          </E1EDP01>
     </IDOC>
</INVOIC01>
I thinks this is like a copying th header segment details in the item details.
Please help me in ths regard
Thank you
Sam

FCC in Xslt Mapping?

Similar Messages

Maybe you are looking for